Fachaufsätze

Der Arbeitspunkt des Fraunhofer ILT liegt an der vordersten Front technologischer Innovationen. Dies verlangt von uns eine aktive Beteiligung am wissenschaftlichen Diskurs der Laser-Community. Unsere Ingenieure und Wissenschaftler publizieren in Absprache mit unseren Auftraggebern regelmäßig grundlegende und anwendungsspezifische Fachaufsätze. Zahlreiche Grundsteine für neue Entwicklungen im Bereich der Lasertechnik wurden im Fraunhofer ILT gelegt und in entsprechenden Fachaufsätzen dokumentiert.

Adams, M., Holly, C., Rauch, S., Traub, M., Hoffmann D., Haefner, C.:
Multiphysics analysis of chip and resonator designs for increased damage threshold of external cavity high-power laser diodes.
OPTICS EXPRESS 32(4), 6446-6462, (2024)
https://doi.org/10.1364/OE.503081 (Open Access)

Adams, M., Traub M., Hoffmann D., Meinert F., Ilzhöfer P., Pfau T., Haefner C.:
Optical setup for a two-dimensional tweezer array with independently adjustable columns for neutral atom quantum computing.
SPIE Quantum West, 2024, San Francisco, California, United States, 27 January - 1 February 2024, San Francisco, California, US.
Proceedings Volume 12911, Quantum Computing, Communication, and Simulation IV; 129110L (2024)
https://doi.org/10.1117/12.2692620

Al Enezy-Ulbrich, M.A.,Kreuels, K.,Simonis, M.,Milvydaite, I., Reineke, A.T.,Schemmer, C.,Gillner, A.,Pich, A.:
Enhancing Adhesion of Fibrin-Based Hydrogel to Polythioether Polymer Surfaces.
ACS Applied Materials & Interfaces 16(11), 14371- 14381, (2024)
https://doi.org/10.1021/acsami.4c00620

Antal, D., Altenmüller, D., Dümpelmann, M., Scheiwe, C., Reinacher, P., Crihan, E., Ignat, B., Cuciureanu, I., Demerath, T., Urbach, H., Schulze‐Bonhage, A., Heers, M.:
Semiautomated electric source imaging determines epileptogenicity of encephaloceles in temporal lobe epilepsy.
Epilepsia, online first, (13 S.) (2024)
http://dx.doi.org/10.1111/epi.17879 (Open Access)

Baer, P., Cebeci, P., Reiter, M., Giesberts, M., Hoffmann, D.:
10 W-class, narrow-linewidth, linearly polarized, low-noise Holmium-doped Fiber Amplifier at 2095 nm.
Optics Continuum 3(8), 1302-1310 (2024)
https://doi.org/10.1364/OPTCON.525036 (Open Access)

Baer, P., Cebeci, P., Reiter, M., Giesberts, M., Hoffmann, H.-D.:
Narrow-Linewidth and Low-Noise Holmium-doped Fiber Amplifier at 2095 nm with compact Packaging.
SPIE LASE, 2024, San Francisco, California, United States.
Proceedings Volume 12865, Fiber Lasers XXI: Technology and Systems; 128651J, (4 S.), (2024)
https://doi.org/10.1117/12.3002827

Baer, P., Cebeci, P., Reiter, M., Bontke, F., Giesberts, M., Hoffmann, D.:
Ultra-low-noise, single-frequency, all-PM Thulium- and Holmium-doped Fiber Amplifiers at 1950 nm and 2090 nm for third-generation G ravitational Wave Detectors.
IEEE Photonics Journal 16(1), 1500809, (2024)
https://doi.org/10.1109/JPHOT.2024.3354454 (Open Access)

Beckmann, L., Bi, T., Thoms, J., Wenk, M., Zhang, S., Kratz, M., Del'Haye, P.:
Selective laser-induced etching for novel 3D microphotonic devices.
SPIE LASE, 2024, San Francisco, California, United States, 27 January - 1 February 2024.
Proc. Vol. 12873, Laser-based Micro- and Nanoprocessing XVIII; 1287303 (2024)
http://dx.doi.org/10.1117/12.3002335

Bosman, R., Prester, A., Sung, S., von Soosten, L., Dibenedetto, S., Bartels, K., von Stetten, D., Mehrabi, P., Blatter, M., Lu, G., Suer, B., Wilmanns, M., Osbild, M., Schulz, E.:
A systematic comparison of Kapton-based HARE chips for fixed-target serial crystallography.
Cell Reports Physical Science, In Press, 101987, (2024)
http://dx.doi.org/10.1016/j.xcrp.2024.101987 (Open Access)

Buske, P., Hofmann, O., Bonnhoff, A., Stollenwerk, J., Holly, C.:
High fidelity laser beam shaping using liquid crystal on silicon spatial light modulators as diffractive neural networks.
OPTICS EXPRESS 32(5), 7064-7078, (2024)
http://dx.doi.org/10.1364/oe.507630 (Open Access)

Brunner, T., Fuchs, Florian, F., Samuel M., Frühling, J.:
Laser-based method for the fabrication of monolithically and vertically integrated MEMS sensors.
22. GMA/ITG-Fachtagung Sensoren und Messsysteme 2024, 2024-06-11-2024-06-12, Nürnberg, 486-491 (2024)
http://dx.doi.org/10.5162/sensoren2024/p17 (Open Access)

Canella, F., Weitenberg, J., Thariq, M., Schmid, F., Dwivedi, P., Galzerano, G., Hänsch, Th. W., Udem, Th., Ozawa, A.:
Low-repetition-rate optical frequency comb.
Optica 11(1), 1-8 (2024)
https://doi.org/10.1364/OPTICA.506353 (Open Access)

Cheng, X., Tempeler, J., Danylyuk, S., Böker, A., Tsarkova, L.:
Disclosing Topographical and Chemical Patterns in Confined Films of High-Molecular-Weight Block Copolymers under Controlled Solvothermal Annealing.
Polymers 16(13), 1943, (15 S.), (2024)
https://doi.org/10.3390/polym16131943 (Open Access)

Coenen, V. A., Jarc, N., Hirsch, M., Reinacher, P. C., Steinhoff, B. J., Bast, T., Schulze-Bonhage, A., Sajonz, B. E. A.:
Technical note: preliminary surgical experience with a new implantable epicranial stimulation device for chronic focal cortex stimulation in drug-resistant epilepsy.
Acta Neurochirurgica 166, 145, (7 S.), (2024)
https://doi.org/10.1007/s00701-024-06022-0 (Open Access)

Deriks, L., Bahat Treidel, E., Brandl, E., Bravin, J., Brusaterra, E., Danylyuk, S.:
Laser-lift-off of GaN-based transistors with an ultra-short-pulsed deep UV laser.
SPIE LASE, 2024, San Francisco, California, United States, 27 January - 1 February 2024.
Proceedings Volume 12872, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIX,1287207 (2024)
http://dx.doi.org/10.1117/12.3001106

Douissard, P.-A., Wollesen, L., Pauwels, K, Loiko, P., Brasse, G., Simeth, S. J., Reininghaus, M., Mathieu, J., Dujardin, C., Camy, P., Martin, T.:
Micro-patterning of scintillating films by Liquid Phase Epitaxy: A proof of concept.
OPTICAL MATERIALS 149, 114939, (11 S.), (2024)
https://doi.org/10.1016/j.optmat.2024.114939

Dutta, A., Weisheit, A., Dutta Majumdar, J.:
Effect of simultaneous heating on oxidation behavior of niobium added titanium aluminide (Ti-45Al-5Nb-0.5Si) developed by laser direct energy deposition (LDED).
Materials Chemistry and Physics 312, 128531, (2024)
http://dx.doi.org/10.1016/j.matchemphys.2023.128531

Eisenbach, L, Wang, Z., Schulte, J., Heuermann, T., Russbüldt, P., Meyer, R., Gierschke, P., Lenski, M., Sugiura, M., Tamura, K., Limpert, J., Haefner, C.:
Highly efficient, high average power nonlinear compression of mJ pulses at 2 µm wavelength below 20 fs in a gas-filled multi-pass cell.
Journal of Physics: Photonics 6(3), 035015, (8 S,) (2024)
https://doi.org/10.1088/2515-7647/ad4cc4 (Open Access)

Frommer, M. L., Walz, I. D., Aiple, F., Schröter, N., Maurer, C., Rijntjes, M., Prokop, T., Reinacher, P. C., Coenen, V. A., Sajonz, B. E. A.:
Rebound Tremor Frequency as a Potential Diagnostic Marker for Delayed Therapy Escape after Thalamic Deep Brain Stimulation for Essential Tremor—Insights from a Cross-Sectional Study.
Brain Sciences 14(7), 667, (10 S.), (2024)
https://doi.org/10.3390/brainsci14070667 (Open Access)

Fu, C., Grubert, N., Kurth, R., Garmshausen, Y., Hoffmann, A., Stollenwerk, J., Holly, C.:
Optical design concept for xolography: a volumetric 3D-printer.
International Optical Design Conference 2023, 2023, Quebec City, QC, Canada.
Proceedings Volume 12798, International Optical Design Conference 2023; 127982Z (2024)
http://dx.doi.org/10.1117/12.2692560

Fu, C., Onyszkiewicz, D., Stollenwerk, J., Holly, C.:
Reinforcement Learning für die automatisierte Auslegung drei- bis fünflinsiger Systeme unter Berücksichtigung Seidelscher Aberrationen.
125. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 21. Mai - 25. Mai 2024, Aachen. DGaO Proceedings, 125_b21, (2 S.), (2024)
https://www.dgao-proceedings.de/download/125/125_b21.pdf

Fu, C., Onyszkiewicz, D., Kemmerling, M., Stollenwerk, J., Holly, C.:
Evaluation of action spaces for reinforcement learning in optical design.
SPIE Photonics Europe, 2024, 7-12 April 2024, Strasbourg, France.
Proceedings Volume 13017, Machine Learning in Photonics; 130170X (2024)
https://doi.org/10.1117/12.3016630

Geus, J., Elsen, F., Nyga, S., Stolk, A., van der Enden, K., van Zwet, E., Haefner, C., Hanson, R., Jungbluth, B.:
Low-noise short-wavelength pumped frequency downconversion for quantum frequency converters.
Optica Quantum 2(3), 189-195, (2024)
http://dx.doi.org/10.1364/opticaq.515769 (Open Access)

Grubert, N., Lange, F., Stollenwerk, J., Holly, C.:
Enhancing laser materials processing efficiency: dynamic beam shaping and parallelization strategies.
SPIE Photonics Europe, 2024 7-12 April 2024, Strasbourg, France.
Proceedings Volume 13005, Laser + Photonics for Advanced Manufacturing; 1300506 (2024)
https://doi.org/10.1117/12.3016608

Grubert, N., Lange, F., Bonhoff, A., Holly, C.:
Kaskadiertes optisches System: rotierendes diffraktives optisches Element und 2D-Galvanometerscanner - Design, Evaluierung und Anwendung.
125. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 21. Mai - 25. MAI 2024, Aachen. DGaO Proceedings, 125_a2, (2 S.), (2024)
https://www.dgao-proceedings.de/download/125/125_a2.pdf

Haefner, C.L., et a.:
Achievement of Target Gain Larger than Unity in an Inertial Fusion Experiment.
PHYSICAL REVIEW LETTERS 132, 65102- (2024)
https://doi.org/10.1103/PhysRevLett.132.065102 (Open Access)

Hermann, M. G., Schröter, N., Rau, A., Reisert, M., Jarc, N., Rijntjes, M., Hosp, J. A., Reinacher, P. C., Jost, W. H., Urbach, H., Weiller, C., Coenen, V. A., Sajonz, B. E. A.:
The connection of motor improvement after deep brain stimulation in Parkinson’s disease and microstructural integrity of the substantia nigra and subthalamic nucleus.
NeuroImage: Clinical 42, 103607, (7 S.), (2024)
https://doi.org/10.1016/j.nicl.2024.103607 (Open Access)

Hofmann, O., Stollenwerk, J., Holly, C.:
Iterative algorithm for the generation of phase masks for spatial laser beam shaping in arbitrary optical systems.
International Optical Design Conference 2023, 2023, Quebec City, QC, Canada.
Proceedings of SPIE Vol 12798, International Optical Design Conference 2023; 127981O (2024)
http://dx.doi.org/10.1117/12.2692405

Jung, M.:
Impact of preheating conditions on form deviation during laser polishing of N-BK7 glass.
11th european seminar on precision optics manufacturing. Eleventh European Seminar on Precision Optics Manufacturing (POM24), 2024, Teisnach, Germany. Proceedings Vol. 13221, Eleventh European Seminar on Precision Optics Manufacturing; 132210B (2024)
http://dx.doi.org/10.1117/12.3030903

Krause, T., Nusko, D., Bauermann, L.P., Vetter, M., Schäfer, M., Holly, C.:
Methods for Quantifying Expansion in Lithium-Ion Battery Cells Resulting from Cycling: A Review.
Energies 17(7), 1566, (39 S.), (2024)
https://doi.org/10.3390/en17071566 (Open Access)

Kreinest, L., Schober, B., Willenborg, E., Stollenwerk, J.:
Investigation of asymmetry reduction for surface structuring and destructuring by laser remelting.
Heliyon 10(2), e24067, (2024)
https://doi.org/10.1016/j.heliyon.2024.e24067 (Open Access)

Kreinest, L., Schüssler, J., Özaydin, O., Kochuthundil Subhash, S., Willenborg, E., Bührig-Polaczek, A.:
Laser Remelting of Ductile Cast Iron to Achieve a Graphite-Free Surface Layer for Enabling a Manual High-Gloss Finish.
Metals 14(3),347, (14S.), (2024)
https://doi.org/10.3390/met14030347 (Open Access)

Kunz, L., Staresina, B.P., Reinacher, P.C., Brandt, A., Guth, T.A., Schulze-Bonhage A., Jacobs J.,:
Ripple-locked coactivity of stimulus-specific neurons and human associative memory.
Nature 27, 587-599 (2024)
https://doi.org/10.1038/s41593-023-01550-x (Open Access)

Kurth, R., Hofmann, O., Colak, Y., Annika Bonhoff, A.Jochen Stollenwerk, Carlo Holly:
Modellbasierte Strahlformung mittels diffraktiver optischer Elemente für die Lasermaterialbearbeitung.
125. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 21. Mai - 25. Mai 2024, Aachen. DGaO Proceedings, 125_A30, (2 S.), (2024)
https://www.dgao-proceedings.de/download/125/125_a30.pdf

Lauer, E., Riegler, E., Mutter, J., Alig, S., Bleul, S., Kuehn, J., Ranganathan, L., Klingler, C., Demerath, T., Würtemberger, U., Rau, A., Weiß, J., Eisenblaetter, M., Bamberg, F., Prinz, M., Finke, J., Duyster, J., Illerhaus, G., Diehn, M., Alizadeh, A., Schorb, E., Reinacher, P., Scherer, F.:
Improved early outcome prediction by MRI-based 3D tumor volume assessment in patients with CNS lymphomas.
Neuro-Oncology 26(2), 374-386, (2024)
http://dx.doi.org/10.1093/neuonc/noad177

Mense, T. H., Höffner, J., Baumgarten, G., Eixmann, R., Froh, J., Mauer, A., Munk, A., Wing, R., and Lübken, F.-J.:
3D wind observations with a compact mobile lidar based on tropo- and stratospheric aerosol backscatter.
Atmospheric Measurement Techniques 17(6), 1665-1677 (2024)
https://doi.org/10.5194/amt-17-1665-2024 (Open Access)

Neuß, J, Linden, S:
Hide and Seek: Using masked vision transformer to detect surface structures on laser polished metals.
25th International Symposium on Laser Precision Microfabrication, June 11-14, 2024, San Sebastian, Spain.
Proceedings of LPM2024, #24-033, (9 S,), (2024)

Peters, C., Kratz, M., Köller, J.,Borzeck, S., Simeth, S.:
Selective Laser-induced Etching (SLE) of Transparent Materials for Microelectronic Components and Quantum Computing Applications.
Photonic West 2024, SPIE LASE, 2024, San Francisco, California, United States.
Proceedings Volume 12873, Laser-based Micro- and Nanoprocessing XVIII; 28730A (2024)
https://doi.org/10.1117/12.2692475

Peters, C., Geppert, B., Dashjav, E., Kratz, M., Tietz, F.:
Glass molding tools fabricated with Selective Laser-induced Etching for sustainable treatment of solid-state electrolytes.
Journal of Laser Micro/Nanoengineering 19(1), (8 S.), (2024)
https://doi.org/10.2961/jlmn.2024.01.2014 (Open Access)

Reiter, M., Baer, P.:
Thermo-optical Simulation of Holmium-doped Fiber Amplifiers for high-power Applications.
Optics Continuum 3(8), 1516-1527, (2024)
https://doi.org/10.1364/OPTCON.532149

Sajonz, B., Frommer, M., Reisert, M., Blazhenets, G., Schröter, N., Rau, A., Prokop, T., Reinacher, P., Rijntjes, M., Urbach, H., Meyer, P., Coenen, V.:
Disbalanced recruitment of crossed and uncrossed cerebello-thalamic pathways during deep brain stimulation is predictive of delayed therapy escape in essential tremor.
NeuroImage: Clinical 41, 103576, (2024)
http://dx.doi.org/10.1016/j.nicl.2024.103576 (Open Access)

Sajonz, B. E. A., Brugger, T. S., Reisert, M., Büchsel, M., Schröter, N., Rau, A., Egger, K., Reinacher, P. C., Urbach, H., Coenen, V. A., Kaller, C. P.:
Cerebral Intraparenchymal Hemorrhage due to Implantation of Electrodes for Deep Brain Stimulation: Insights from a Large Single-Center Retrospective Cross-Sectional Analysis.
Brain Sciences 14(6), 612, (16 S.), (2024)
https://doi.org/10.3390/brainsci14060612 (Open Access)

Scheuer, S., Munk, A., Hammerschmidt, N., Strotkamp, M., Höffner, J.:
Diode-pumped, Q-switched Alexandrite laser as emitter for general purpose atmospheric Lidar systems.
11th EPS-QEOD Europhoton Conference on Solid-State, Fibre, and Waveguide Coherent Light Sources (EUROPHOTON 2024), 25-30 AUGUST 2024, Vilnius, Lithuania. EPJ Web Conf. 307, 04033, (2024).
http://dx.doi.org/10.1051/epjconf/202430704033 (Open Access)

Scheuer, S., Munk, A., Strotkamp, M., Haefner, C. L., Höffner, J., Froh, J.:
Efficient intra-cavity frequency doubled, diode-pumped, Q-switched Alexandrite laser directly emitting in the UV.
OPTICS EXPRESS 32(5), 7553-7563, (2024)
https://doi.org/10.1364/OE.513731 (Open Access)

Schmid, F., Moreno, J., Weitenberg, J., Rußbüldt, P., Hänsch, Th. W., Udem, Th., Ozawa, A.:
An ultra-stable high-power optical frequency comb.
APL Photonics 9(2), 26105- (2024)
https://doi.org/10.1063/5.0165805 (Open Access)

Schossau, M., Hofmann, O, Bonhoff, A., Adams, M., Stollenwerk, J., Holly, C.:
Modeling of External Feedback in Semiconductor Lasers for Continuous-Variable Quantum Key Distribution Systems.
125. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 21. Mai - 25. Mai 2024, Aachen. DGaO Proceedings, 125_b5, (2 S.), (2024)
https://www.dgao-proceedings.de/download/125/125_b5.pdf

Stolk, A.J., van der Enden, K.L., Slater, M.-C., te Raa-Derckx, I., Botma, P., van Rantwijk, J., Biemond, B.,  Hagen, R.A.J., Herfst, R.W., Koek, W.D., Meskers, A.J.H., Vollmer, R., van Zwet, E.J. , Markham, M., Edmonds, A.M. , Geus,  J.F., Elsen,  F., Jungbluth, B., Haefner, C., Tresp, C., Stuhler, J., Ritter, S., Hanson, R.:
Metropolitan-scale heralded entanglement of solid-state qubits.
ArXiv:2404.03723, (10 S.), (2024)
https://doi.org/10.48550/arXiv.2404.03723 (Open Access)

Thirolf, P., Krämer, S., Weitenberg, J.:
Thorium-229-Kernuhren für ultragenaue Zeitmessung und Quantensensorik - Mehr als ein hochgenauer Zeitmesser.
Physik in unserer Zeit, early view, (2024)
https://doi.org/10.1002/piuz.202301696 (Open Access)

Weiss, C., Beck, B., Häfner, C.:
Implications of topology optimization on the ecological efficiency of the LPBF process.
Procedia CIRP 124, 163-167, (2024)
http://dx.doi.org/10.1016/j.procir.2024.08.091 (Open Access)

Würtemberger, U., Diebold, M., Rau, A., Akgün, V., Becker, L., Beck, J., Reinacher, P., Taschner, C., Reisert, M., Fehrenbacher, L., Erny, D., Scherer, F., Hohenhaus, M., Urbach, H., Demerath, T.:
Advanced diffusion imaging reveals microstructural characteristics of primary CNS lymphoma, allowing differentiation from glioblastoma.
Neuro-Oncology Advances 6(1), vdae093, (10 S.), (2024)
http://dx.doi.org/10.1093/noajnl/vdae093 (Open Access)

Würtemberger, U., Rau, A., Diebold, M., Becker, L., Hohenhaus, M., Beck, J., Reinacher, P. C., Erny, D., Reisert, M., Urbach, H., Demerath, T.:
Advanced diffusion MRI provides evidence for altered axonal microstructure and gradual peritumoral infiltration in GBM in comparison to brain metastases.
Clinical Neuroradiology, (2024).
https://doi.org/10.1007/s00062-024-01416-0 (Open Access)

Abels, P., Knaak, C., Kowalick, K., Kaierle, S., Lanfermann, A., Regaard, B.:
Process Monitoring and Control.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 747-784, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_37

Adams, M., Holly, C., Rauch, S., Traub, M., Hoffmann D.:
Evaluation of design concepts for feedback-resistant 9xx-nm high-power laser diodes.
SPIE LASE 2023 | San Francisco, California, United States | 28 January - 3 February 2023.
Proceedings Volume 12403, High-Power Diode Laser Technology XXI, 124030B, (9 S.) (2023)
https://doi.org/10.1117/12.2647171

Baer, P., Elshani, A., Reiter, M., Cebeci, P., Giesberts, M., Ebert, J., Hoefer, M., Hoffmann, D.:
Thulium- and Holmium-doped high stability fiber amplifiers at 2 µm for next generation gravitational wave detectors.
SPIE LASE, 2023, San Francisco, California, United States. Proceedings Volume 12400, Fiber Lasers XX: Technology and Systems; 124000J (2023)
https://doi.org/10.1117/12.2649611

Behrens, S., Brosda, M., Engelmann, C., Nguyen, N. P., van der Straeten, K., Olowinsky, A., Boglea, A. L., Roesner, A., Russek, U. A.:
Laser Beam Welding of Thermoplastics.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 547-569, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_22

Bergmann, K.:
Extreme Ultraviolet Radiation Sources from Dense Plasmas.
Atoms 11(9), (2023)
http://dx.doi.org/10.3390/atoms11090118 (Open Access)

Bergmann, K.; Vieker, J.; von Wezyk, A.; Melsheimer, F.:
Compact EUV Sources for Metrology and Irradiation Experiments.
In: Bakshi, Vivek (Ed.): Compact EUV Sources for Metrology and Irradiation Experiments, SPIE, 381-412 (2023)
https://doi.org/10.1117/3.2638242.ch10

Bergmann, K., Vieker, J.:
EUV Optics
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 903-910, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_43

Bergmann, K, Noll, R.:
Pulsed Plasma EUV Sources.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 891-902, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_42

Bremen, S., Eibl, F., Gayer, C., Heußen, D., Lantzsch, T., Masseling, L., Munk, J., Vogelpoth, A., Pichler, T., Pirch, N., Risse, J., Schmithüsen, T., Schniedenharn, M., Such, A., Tenbrock, C., Thombansen, U., Weiß, C., Wissenbach, K.:
Laser Powder Bed Fusion (LPBF).
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 305-396, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_7

Bremer, J., Gasser, A.:
Hybrid AM and Process Chains.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 489-492, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_13

Brenner, A., Gretzki, P., Lange, K., Pongratz, L., Reininghaus, M.:
Thin Film Ablation.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 647-653, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_29

Brose, S., Danylyuk, S., Lüttgenau, B., Gisch, I., Lohmann, L., Stollenwerk, J., Holly, C.:
Development of an ultra-compact inline transmission grating spectrograph for extreme ultraviolet wavelengths.
SPIE Photomask Technology + EUV Lithography, 1-6 October 2023, Monterey, California, US.
Proc. Vol. 12750, International Conference on Extreme Ultraviolet Lithography 2023; 127500Q (2023)
http://dx.doi.org/10.1117/12.2683682

Brucki, M.,  Schmickler, T,  Gasser, A., Häfner, C.L.:
Influence of the Relative Position of Powder–Gas Jet and Laser Beam on the Surface Properties of Inconel 625 Coatings Produced by Extreme High-Speed Laser Material Deposition (EHLA).
Coatings 13(6), 998 (23 S.), (2023)
https://doi.org/10.3390/coatings13060998 (Open Access)

Brückner, F., Bremen, S., Müller, B.:
Special issue of the Fraunhofer Direct Digital Manufacturing Conference DDMC 2023.
Progress in Additive Manufacturing 8(1), (2023)
https://doi.org/10.1007/s40964-022-00377-5

Buske, P., Voll, A., Stollenwerk, J., Holly, C.:
Diffractive neural networks built from spatial light modulators for laser beam shaping in the NIR and VIS.
International Optical Design Conference 2023, 4-8 June 2023, Quebec City, QC, Canada.
Proc. of SPIE 12798, International Optical Design Conference 2023; 127981Q (2023)
http://dx.doi.org/10.1117/12.2692407

Bussek, T., Völl, A., Stollenwerk, J., Holly, C.:
A quantum annealing approach with a problem specific initial state for the combinatorial selection of catalog lenses for the automated optics design.
International Optical Design Conference 2023, 2023, 4-8 June 2023, Quebec City, QC, Canada, Quebec City, QC, Canada.
Proc. Vol. 12798, International Optical Design Conference 2023; 1279832 (2023)
http://dx.doi.org/10.1117/12.2692563

Bussek, T., Mitri, A., Stollenwerk, A., Völl, A., Stollenwerk, J., Holly, C.:
Scan path optimization for laser additive manufacturing with quantum computing.
WLT/LiM Lasers in Manufacturing Conference 2023. 26. – 29. Juni 2023, München Germany.
Proceedings of World of Photonics, (11 S.), (2023).

Cherif, L., Safdar, M., Lamouche, G., Wanjara, P., Paul, P., Wood, G., Zimmermann, M., Hannesen, F., Zhao, Y.:
Evaluation of Key Spatiotemporal Learners for Print Track Anomaly Classification Using Melt Pool Image Streams.
IFAC-PapersOnLine 56(2), 4733-4739, (2023)
http://dx.doi.org/10.1016/j.ifacol.2023.10.1235

Cebeci, P., Giesberts, M., Baer, P., Eßer, J., Gützlaff, J., Hoffmann, H.-D., Dahl, K.:
Highly stable fiber amplifier development and environmental component-testing for the space-based gravitational wave detector LISA.
SPIE LASE, 28.1-2.2. 2023 , San Francisco CA, United States, California, United States. Proceedings Volume 12400, Fiber Lasers XX: Technology and Systems; 124001H (2023)
https://doi.org/10.1117/12.2649881

Coenen, V., Watakabe, A., Skibbe, H., Yamamori, T., Döbrössy, M., Sajonz, B., Reinacher, P., Reisert, M.:
Tomographic tract tracing and data driven approaches to unravel complex 3D fiber anatomy of DBS relevant prefrontal projections to the diencephalic-mesencephalic junction in the marmoset.
Brain Stimulation 16(2), 670-681, (2023)
http://dx.doi.org/10.1016/j.brs.2023.03.012 (Open Access)

Dahlmanns, J., Bussek, T., Völl, A., Stollenwerk, J., Holly, C., Derra, G., Herper, M., Conrads, R., Mönch, H., Ogiewa, F.:
Design of multi-aperture beam integrators for homogenization and local controllability of irradiance distributions from high power VCSEL systems.
SPIE Digital Optical Technologies, 2023, Munich, Germany. Proceedings Volume 12624, Digital Optical Technologies 2023; 126240S (2023).
http://dx.doi.org/10.1117/12.2680279

Dahmen, M., Hama-Saleh Abdullah, R., Maischner, D., Meyer, P., Olowinsky, A.:
In-situ laser heat treatment during laser beam welding of dual-phase steels.
WLT/LiM Lasers in Manufacturing Conference 2023. 26. – 29. Juni 2023, München Germany.
Proceedings of World of Photonics, (12 S.), (2023).

Dahmen, M.:
Heat Conduction Mode Welding.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 535-545, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_21

Dahmen, Marius:
Laserbasierte Funktionalisierung von partikulären Polyetheretherketon-Beschichtungen auf Aluminiumsubstraten mittels Zwei-Strahl-Ansatz.
Dissertation RWTH Aachen University, Apprimus Verlag, Aachen, (2023)
http://doi.org/10.18154/RWTH-2023-11484 (Open Access)

Danylyuk, S., Osbild, M., Korr, L., Fischer, M., Delmdahl, R., Reininghaus, M.:
Sub-micrometer structuring of surfaces with deep UV lasers.
SPIE LASE, 2023, 28 Jan - 3 Feb 2023, San Francisco, California, United States.
Proceedings Volume 12409, Laser-based Micro- and Nanoprocessing XVII (Proc. of SPIE), 1240911 (2023)
https://doi.org/10.1117/12.2647865

Danylyuk, S., Bergmann, K.:
EUV Measurement Technologies.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 911-918, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_44

de Oliveira Lopes , M., Petring, D., Stoyanov, S., Gillner, A.:
Control of melt dynamics in laser cutting based on a resonant nozzle cavity.
Journal of Manufacturing Processes 105, 399-406, (2023)
https://doi.org/10.1016/j.jmapro.2023.09.051 (Open Access)

Grubert, N., Fu, C., Kurth, R., Stollenwerk, J., Holly, C.:
Justagestrategie zur Überlagerung von vier Lichtschnitten.
Deutsche Gesellschaft für angewandte Optik e. V., (DGaO Jahrestagung 2023, 30.05-03.06 2023, Aachen Germany.
Proceedings DGaO 2023, P33, (1 S.), (2023)

Esser, D., Giesberts, M., Erben, B., Nyga, S., Kasemann, R., Wührer, C., Hahn, S., Leyendecker, M., Eßer, J., Wirz, W., Klein, S., Traub, M., Klein, J., Brandenburg, W., Luttmann, K., Mohr, D.,  Pérez Prieto, L., Hoffmann, H.-D.:
Optomechanical design of a 150 mJ single frequency UV laser for the AEOLUS-2 mission.
International Conference on Space Optics — ICSO 2022, 3-7 October 2022, Dubrovnik, Croatia. Proceedings Volume 12777, International Conference on Space Optics — ICSO 2022, 127770N (2023).
https://doi.org/10.1117/12.2688830 (Open Access)

Fink, S., Demir, D., Börner, M., Göken, V.,  Vedder, C.:
High-Speed Laser Drying of Lithium-Ion Battery Anodes: Challenges and Opportunities.
World Electric Vehicle Journal 14(9), 255- (2023)
https://doi.org/10.3390/wevj14090255 (Open Access)

Fries, S., Vogelpoth, A., Kaletsch, A., Broeckmann, C.:
Influence of post heat treatment on microstructure and fracture strength of cemented carbides manufactured using laser-based additive manufacturing.
INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS 111, 106085- (2023)
http://dx.doi.org/10.1016/j.ijrmhm.2022.106085

Fricke-Bergmann, C., Sturm, V., Noll, R.:
Laser-Induced Breakdown Spectroscopy.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 833-868, Springer, Cham, (2023).
https://doi.org/10.1007/978-3-030-98323-9_40

Frühling, J, Schreyer, S., Fink, S, Vedder, C.:
Laser-based crystallization of oxide ceramic thin films for Solid Oxide Fuel Cells.
WLT/LiM Lasers in Manufacturing Conference 2023. 26. – 29. Juni 2023, München Germany.
Proceedings of World of Photonics, (5 S.), (2023)

Fu, C. Kemmerling, M., Stollenwerk, J., Holly, C.:
Ansätze für die Entwicklung von optischen Systemen mittels bestärkenden Lernens.
124. Jahrestagung der Deutschen Gesellschaft für angewandte Optik e.V., 30.05.2023-03.06.2023, Berlin.
DGaO-Proceedings, B10, (2 S.) (2023)
urn:nbn:de:0287-2023-B010-8

Gasser, A.:
LMD Applications.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 449-455, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_14

Gasser, A., Schopphoven, T.:
LMD Filler Material Feeding Systems.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 427-430, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_10

Gasser, A., Schopphoven, T.:
LMD Introduction.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 397-403, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_8

Ghasemi, A., Fereiduni, E., Elbestawi, M., Saewe, J., Hartke, N., Adar, F., Savadkouei, K., Fukushima, Y., Habibi, S.:
On the preparation and characterization of AlSi12-graphene powder for powder bed fusion additive manufacturing applications.
Powder Technology 426, 118689, (2023)
http://dx.doi.org/10.1016/j.powtec.2023.118689

Geus, J.F., Elsen, F., Nyga, S., Stolk, A., van der Enden, K., van Zwet, E., Haefner, C., Hanson, R., Jungbluth, B.:
Low-noise short-wavelength pumped frequency down-conversion for Quantum Frequency Converters.
OpticaOpen, 107563 (2023)
http://dx.doi.org/10.1364/opticaopen.23684502.v1 (Open Access)

Giesen, C., Bochvarov, L., Müller, L., Nyga, S., Reinacher, P., Lenenbach, A.:
Efficient and tissue-saving bone ablation with a pulsed 3 µm laser source.
SPIE BiOS, 2023, San Francisco, 28.01-03.02.2023, California, United States.
Proceedings Volume 12377, Optical Interactions with Tissue and Cells XXXIV; 1237709 (2023)
https://doi.org/10.1117/12.2668183

Giesen C., Bochvarov L., Yo Y.M., Bogdoll M., Vervoort S., Lenenbach A.:
High-Speed Laser Drilling for Dental Implantation: Ablation Process and Applicator Technology.
Current Directions in Biomedical Engineering 9(1), 647-649, (2023)
https://doi.org/10.1515/cdbme-2023-1162 (Open Access)

Gillner, A.:
Laser Fine Cutting.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 735-744, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_36

Glushych, V., Schopphoven, T.,
Gleichzeitig beschichten und bearbeiten.
Journal für Oberflächentechnik 63, 12-13 (2023)
http://dx.doi.org/10.1007/s35144-023-2558-x

Glushych, V., Grolms, M.:
SMaC sets new standards in coating and surface finishing.
PhotonicsViews 20(6), 44-47, (2023)
http://dx.doi.org/10.1002/phvs.202300042 (Open Access)

Grubert, N., Prochnau, M., Stollenwerk, J., Holly, C.:
Fiber-based sensor for combustion chamber monitoring: manufacturing challenge.
SPIE OPTO, 28 Jan - 3 Feb 2023, San Francisco, California, United States.
Proceedings Vol. 12434, MOEMS and Miniaturized Systems XXII; 124340O (2023)
https://doi.org/10.1117/12.2647501

Glänzer, L., Lindemann, C., Mues, B., Kreuels, K., Nottrodt, N., Schmitz-Rode, T., Slabu, I.:
Characterization of magnetic targeting effectivity in an artificial tumor vessel network.
International Journal on Magnetic Particle Imaging 9(1), 4- (2023)
https://doi.org/10.18416/IJMPI.2023.2303013 (Open Access)

Hahn, S., Gronloh, B., Wührer, C., Kokkinos, D., Kühl, C., Ammersbach, J., Livrozet, M., Hoffmann, H., Bartsch, P.:
MERLIN high energy laser source for methane sensing at 1645 nm.
International Conference on Space Optics — ICSO 2022, 2022, 3-7 October 2022, Dubrovnik, Croatia.
Proc. Vol. 12777, International Conference on Space Optics — ICSO 2022; 127770M (2023)
http://dx.doi.org/10.1117/12.2688829 (Open Access)

Haasler, D., Surrey, R., Bremer, P.:
Ablation of technical ceramics via cw-laser radiation and comparison with an ultrashort-pulsed laser ablation process.
24th International Symposium on Laser Precision Microfabrication, 13.-15.6.2023, Hirosaki, Japan.
Proceedings of LPM2023, C000176, (8 S.)

Häusler, A., Helm, J., Hollatz, S., Olowinsky, A., Chung, W.-S., Hummel, M.:
Laserbeam Microwelding.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 599-615, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_25

Hesker, M., Stollenwerk, J., Holly, C.:
Multistrahlmanipulation mit einzeln adressierbaren Teilstrahlen für Hochleistungs-UKP-Laserstrahlung.
Deutsche Gesellschaft für angewandte Optik e. V., (DGaO Jahrestagung 2023, 30.05-03.06 2023, Berlin Germany.
Proceedings DGaO 2023, P7, (1 S.), (2023)

Hofmann, J., Taube, V., Stollenwerk, J., Holly, C.:
Measurement and control system for compensation of thermal effects in laser material processing.
WLT/LiM Lasers in Manufacturing Conference 2023. 26. – 29. Juni 2023, München Germany. Proceedings of World of Photonics, (5 S.), (2023).

Hoffmann, H.-D.:
Industrial Laser Systems.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 203-235, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_2

Helm, J., Olowinsky, A., Gillner, A.:
Anlagentechnik und Prozessentwicklung zum kombinierten Laserstrahllöten und -schweißen elektrischer Leistungsverbinder.
SCHWEIßEN UND SCHNEIDEN 7, 472-481, (2023)

Hesker, M., Stollenwerk, J., Holly, C.:
Strahlführungs- und -formungsmethoden in Multistrahlsystemen mit einzeln adressierbaren Teilstrahlen für Hochleistungs-Ultrakurzpuls-Laserstrahlung.
Deutsche Gesellschaft für angewandte Optik e. V., 31.05.-03.06, Berlin. DGaO-Proceedings 2023, 124_p7, (2023).

Hollatz, S., Hummel, M., Lach, M., Olowinsky, A., Gillner, A., Haefner, C., Beckmann, F., Moosmann, J.:
Temporal modulation of ring-shaped laser beam during welding of AW-5083 and AW-6082.
SPIE LASE, 2023, San Francisco, California, United States. Proceedings Volume 12414, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII, 124140C (2023).
https://doi.org/10.1117/12.2649092

Hölters, S., Wendt, F., Noll, R.:
Optical Coherence Tomography.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 809-831, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_39

Hu, S., Zhang, D., Dong, D., Liu, Z., Huang, H., Poprawe, R., Schleifenbaum, J., Ziegler, S.:
Influence of the properties of Ti6Al4V powder materials on the build quality of laser powder bed fusion–manufactured components.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 129, 969-982, (2023)
http://dx.doi.org/10.1007/s00170-023-12244-w

Hummel, M., Meier, C., Olowinsky, A., Gillner, A., Beckmann, F., Moosmann, J., Häfner, C.:
In situ synchrotron observation of the vapor capillary geometry in laser welding of copper with 1030 nm and 515 nm laser beam sources.
SPIE LASE, 2023, San Francisco, 28.01-03.02California, United States.
Proceedings Volume 12414, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII; 124140A (2023)
http://dx.doi.org/10.1117/12.2648946

Isbell, L., Tschuch, C., Doostkam, S., Waldeck, S., Andrieux, G., Shoumariyeh, K., Lenhard, D., Schaefer, H., Reinacher, P., Bartsch, I., Pantic, M., Vinnakota, J., Kakkassery, V., Schorb, E., Scherer, F., Frey, A., Boerries, M., Illerhaus, G., Duyster, J., Schueler, J., von Bubnoff, N.:
Patient‐derived xenograft mouse models to investigate tropism to the central nervous system and retina of primary and secondary central nervous system lymphoma.
Neuropathology and Applied Neurobiology 49(2), e12899, (2023)
http://dx.doi.org/10.1111/nan.12899 (Open Access)

Janssen, S., Haasler, D.:
Drilling.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 665-702, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_31

Janzen, C., Noll, R.:
Light Scattering for In-Line Process Monitoring.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 869-888, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_41

Johnigk, C.:
Cleaning.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 655-663, Springer, Cham., (2023).655-663 (2023)
https://doi.org/10.1007/978-3-030-98323-9_30

Kallweit, J., Seewald, R., Pätzel, M., Brackmann, F., Rackerseder, F., Klein, S., Schiebahn, A., Traub, M., Olowinsky, A., Reisgen, U., Gries, T.:
UV-Aushärtung mittels Lichtwellenleitern aus Kunststoff.
ADHÄSION KLEBEN & DICHTEN 67(7/8), 52-55 (2023)
https://doi.org/10.1007/s35145-023-1207-0

Kang, S.-G., Gainov, R., Heußen, D., Bieler, S., Sun, Z., Weinberg, K., Dehm, G., Ramachandramoorthy, R.:
Green laser powder bed fusion based fabrication and rate-dependent mechanical properties of copper lattices.
Materials and Design 231, 112023- (2023)
https://doi.org/10.1016/j.matdes.2023.112023 (Open Access)

Kaufmann, F., Forster, C., Hummel, M., Olowinsky, A., Beckmann, F., Moosmann, J., Roth, S., Schmidt, M.:
Characterization of Vapor Capillary Geometry in Laser Beam Welding of Copper with 515 nm and 1030 nm Laser Beam Sources by Means of In Situ Synchrotron X-ray Imaging.
Metals 13(1), 135- (2023)
http://dx.doi.org/10.3390/met13010135 (Open Access)

Kelbassa, J., Gasser, A.:
Wire Laser Metal Deposition.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 437-440, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_12

Kind, H.:
Laser-Based Glass Frit Bonding.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 627-634, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_27

Kippels, M, Heußen, D, Pirch, N, Häfner, C:
Characterization of the bistable melting regime for processing of copper with an NIR laser under LPBF conditions.
WLT/LiM Lasers in Manufacturing Conference 2023. 26. – 29. Juni 2023, München Germany.
Proceedings of World of Photonics, (13 S.), (2023).

Kittel, J., Wendt, F., Hoelters, S., Gasser, A., Hackel, M.:
Approach for advanced working distance monitoring and control capability in laser metal deposition processing for additive manufacturing.
Journal of Laser Applications 35(2), 022032 (2023)
http://dx.doi.org/10.2351/7.0000886

Klein, S., Adams, M., Traub, M., Biermann, T., Hoffmann, H., Häfner, C.:
Industry and academia: pursuing a PhD at Fraunhofer, the best of both worlds.
SPIE LASE, 2023, San Francisco, California, United States, 28 January - 3 February 2023 San Francisco, CA, US.
Proceedings Volume 12401, High Power Lasers for Fusion Research VII, 124010B (2023)
http://dx.doi.org/10.1117/12.2664343

Ko, M., Zhang, Z., Schopphoven, T.:
Process development and process adaption guidelines for the deposition of thin-walled structures with IN718 using extreme high-speed directed energy deposition (EHLA3D).
Journal of Laser Applications 35(4), 042059, (2023)
http://dx.doi.org/10.2351/7.0001140 (Open Access)

Kreuels, K., Schemmer, C., Gillner, A., Flesch, M., Gillner, A.:
3D-printed scaffolds with perfusable channels for low-cost large construct 3D cell culture.
Current Directions in Biomedical Engineering 9(1), 662-665 (2023)
http://dx.doi.org/10.1515/cdbme-2023-1166

Kratz, M., Rückle, L., Kalupka, C., Reininghaus, M., Häfner, C.:
Dynamic correction of optical aberrations for height-independent selective laser induced etching processing strategies.
OPTICS EXPRESS 31(6), 26104-26119, (2023).
https://doi.org/10.1364/OE.493088 (Open Access)

Kreuels, K., Schemmer, C., Gillner, A., Flesch, M., Gillner, A.:
3D-printed scaffolds with perfusable channels for low-cost large construct 3D cell culture.
Current Directions in Biomedical Engineering 9(1), 662-665 (2023)
http://dx.doi.org/10.1515/cdbme-2023-1166

Kürnsteiner, P., Barriobero-Vilad, P., Bajaj, P., De Geuser, F., Wilms, M.B., Jägle, E.A., Raabe, D.
Designing an Fe-Ni-Ti maraging steel tailor-made for laser additive manufacturing.
Additive Manufacturing 73, 103647, (2023)
https://doi.org/10.1016/j.addma.2023.103647 (Open Access)

Kurth, R., Hofmann, O., Stollenwerk, J., Holly, C.:
Application of machine learning to overcome challenges of generating phase masks for dynamic beam shaping in complex optical systems.
SPIE LASE, 2023, San Francisco, California, United States, 28. Jan.- 04 Feb. 2023.
Proceedings Volume 12414, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII, 124140F (2023).
https://doi.org/10.1117/12.2646223

Kurth, R., König, T., Stollenwerk, J., Holly, C.:
Kompensation von Dezentrierung und Rotation bei der Vermessung von mittels SLM erzeugten Intensitätsverteilungen.
Deutsche Gesellschaft für angewandte Optik e. V., (DGaO Jahrestagung 2023), 30.05-03.06 2023, Aachen Germany. Proceedings DGaO 2023, 124_b2, (2 S.), (2023)
urn:nbn:de:0287-2023-B002-2

Lensing, R.:
Laser Induced Forward Transfer—LIFT.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 489-492, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_17

Leyendecker, L., Zuric, M., Nazar, M.A. , Johannes,K.,  Schmitt, R.H.:
Predictive Quality Modeling for Ultra-Short-Pulse Laser Structuring utilizing Machine Learning.
Procedia CIRP 117, 275-280 (2023)
https://doi.org/10.1016/j.procir.2023.03.047 (Open Access)

Li, T., Zhang, L., Chen, G., Schopphoven, T., Gasser, A., Poprawe, R.:
Eigenstrain reconstruction of residual stress and its application in extreme high-speed laser material deposition.
Journal of Manufacturing Processes 85, 1054-1065 (2023)
https://doi.org/10.1016/j.jmapro.2022.11.078

Li, Z., Lin, X., Zhao, X., Ma, X., Hao, Z., Yao, B., Zhong, C., Gasser, A., Tan, H., Sui, S., Chen, J.:
Introducing a Single Crystal Structure in Polycrystalline Inconel 718 Superalloy Via Laser Directed Energy Deposition.
SSRN - (2023)
https://dx.doi.org/10.2139/ssrn.4265492 (Open Access)

Lücke, T., Schüller, L., Vogelpoth, A., Laag, T., Saewe, J., Häfner, C.:
Einfluss von Laserleistung und Scangeschwindigkeit auf die Bildung von Heißrissen bei der Verarbeitung von Schnellarbeitsstahl HS2-2-2 mittels Laser Powder Bed Fusion.
BERG- UND HÜTTENMÄNNISCHE MONATSHEFTE 168(5), 239-246, (2023)
http://dx.doi.org/10.1007/s00501-023-01353-4 (Open Access)

Lüttgenau, B., Brose, S., Danylyuk, S., Stollenwerk, J., Holly, C.:
Investigation of the resolution limit of Talbot lithography with compact EUV exposure tools.
38th European Mask and Lithography Conference (EMLC 2023), 19-21 June 2023 Dresden, Germany.
Proc. Volume 12802, 38th European Mask and Lithography Conference (EMLC 2023); 1280203 (2023)
https://doi.org/10.1117/12.2675605 9776

Maischner, D., Hama-Saleh Abdullah, R. , Koa, M., Glushych,  V., Weisheit, A. :
Laser cladding of forming tools for bipolar plates for wear protection and repair.
WLT/LiM Lasers in Manufacturing Conference 2023. 26. – 29. Juni 2023, München Germany. Proceedings of World of Photonics, (5 S.), (2023)

Männlin, J., San Antonio-Arce, V., Reinacher, P., Scheiwe, C., Shah, M., Urbach, H., Schulze-Bonhage, A.:
Safety profile of subdural and depth electrode implantations in invasive EEG exploration of drug-resistant focal epilepsy.
Seizure: European Journal of Epilepsy 110, 21-27 (2023)
http://dx.doi.org/10.1016/j.seizure.2023.05.022

Mertin, J., Rozibakieva, T., Vedder, C., Stollenwerk, J.:
Laser curing of digitally printed polymer-silver composite conductive tracks on polycarbonate substrates.
Coatings 13(1), 10- (2023)
https://doi.org/10.3390/coatings13010010 (Open Access)

Mertin, J.:
Laserbasierte Herstellung von Kupferschichten auf Aluminium-Oxid-Keramiken für Anwendungen in der Leistungselektronik.
Dissertation, RWTH Aachen University, 2023, Düren : Shaker Verlag (2023)
http://doi.org/10.18154/RWTH-2023-09878 (Open Access)

Moreno, J., Schmid, F., Weitenberg, J., Karshenboim, S. G., Hänsch, Th. W., Udem, Th., Ozawa, A.:
Toward XUV frequency comb spectroscopy of the 1 S–2 S transition in He+.
The European Physical Journal D 77, 67, (13 S.) (2023)
https://doi.org/10.1140/epjd/s10053-023-00645-1 (Open Access)

Munk, A., Scheuer, S., Strotkamp, M., Jungbluth, B., Froh, J., Mense, T., Mauer, A., Höffner, J.:
Energy-scaling of a diode-pumped Alexandrite laser and prototype development for a compact general-purpose Doppler lidar.
APPLIED OPTICS 62(33), 8732, (2023)
http://dx.doi.org/10.1364/ao.504567 (Open Access)

Mutter, J., Alig, S., Esfahani, M., Lauer, E., Mitschke, J., Kurtz, D., Kühn, J., Bleul, S., Olsen, M., Liu, C., Jin, M., Macaulay, C., Neidert, N., Volk, T., Eisenblaetter, M., Rauer, S., Heiland, D., Finke, J., Duyster, J., Wehrle, J., Prinz, M., Illerhaus, G., Reinacher, P., Schorb, E., Diehn, M., Alizadeh, A., Scherer, F.:
Circulating Tumor DNA Profiling for Detection, Risk Stratification, and Classification of Brain Lymphomas.
Journal of Clinical Oncology 41(9), 1648-1696, (2023)
http://dx.doi.org/10.1200/jco.22.00826

Narrog, F., Lensing, R., Piotrowski, T., Nottrodt, N., Wehner, M., Nießing, B.,  König, N., Gillner, A., Schmitt, R.H.:
LIFTOSCOPE: development of an automated AI‑based module for time‑effective and contactless analysis and isolation of cells in microtiter plates.
Journal of Biological Engineering 17, 10 (2023)
https://doi.org/10.1186/s13036-023-00329-9 (Open Access)

Noll, R.:
Laser-Induced Breakdown Spectroscopy and Its Application Perspectives in Industry and Recycling.
In: Singh, V. (Hg.): Laser Induced Breakdown Spectroscopy (LIBS): Concepts, Instrumentation, Data Analysis and Applications,
823-850.
http://dx.doi.org/10.1002/9781119758396.ch42

Nottrodt, N., Bremus-Köbberling, E.:
3D Photopolymerization for Biofabrication.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 493-499, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_18

Olowinsky, A.:
Bending.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 519-531, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_20

Osbild, M., Brüning, S., Gerhorst, E., Savran, S., van Waveren, A.:
Advanced high-resolution cylinder structuring with parallel Bessel beams under use of UV femtosecond laser radiation.
SPIE LASE, 2023, 28 January - 3 February 2023, San Francisco, California, United States.
Proceedings Volume 12408, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXVIII, 1240808 (2023)
http://dx.doi.org/10.1117/12.2647741

Pirch, N., Nießen, M.:
Modelling of Laser Metal Deposition.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 405-425, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_9

Preußner, J., Rödler, G., Fischer, F., Hintz, K., Friedmann, V., Weisheit, A.:
Additive manufacturing of a lightweight Al-Ca alloy by direct energy deposition and laser powder bed fusion.
Practical Metallography 60(11), 704-715, (2023)
http://dx.doi.org/10.1515/pm-2023-0062 (Open Access)

Qin, S., Saewe, J., Kunz, J., Herzog, S., Kaletsch, A., Schleifenbaum, J., Broeckmann, C.:
Influence of Preheating Temperature on Microstructure Evolution and Hardness of High‐Speed Steel AISI M50 Processed by Laser Powder Bed Fusion.
Steel Research International 94(6), 2200784, (2023)
http://dx.doi.org/10.1002/srin.202200784 (Open Access)

Rackerseder, F., Traub, M., Ito, T., Westphalen, T., Hoffmann, D.:
Beam shaping system for laser-induced crystal growth.
SPIE LASE, 2023, San Francisco, California, United States, 28.1.-2.2.2023, San Francisco, California, United States.
Proceedings Volume 12407, Laser Resonators, Microresonators, and Beam Control XXV, 124070D (2023).
https://doi.org/10.1117/12.2651567

Sari, F., Wissinger, A., Olowinsky, A.:
Laser Transmission Bonding.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 571-585, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_23

Saßmannshausen, A., Mooraj, S., Kratz, M.:
Ultrashort pulse selective laser ablation of multi-layer thin film systems.
SPIE LASE, 2023, San Francisco, California, US, 28 January - 3 February 2023.  Proceedings Vol. 12409, Laser-based Micro- and Nanoprocessing XVII (Proceedings of SPIE), 124090I (2023)

Scheiwe, C., Grauvogel, J., Csók, I., Fistouris, P., Fung, C., Beck, J., Reinacher, P.C., Roelz, R.:
Cisterno-Ventricular Lavage After Aneurysm Clipping for the Prevention of Delayed Infarction in Patients With Subarachnoid Hemorrhage.
Neurosurgery Practice 4(3), 49, (6 S.), (2023)
https://doi.org/10.1227/neuprac.0000000000000049 (Open Access

Scheld, S.W., Hoff, L. C., Vedder, C., Stollenwerk, J., Grüner, D., Rosen, M., Lobe, S., Ihrig, M., Seok, A., Finsterbusch, M., Uhlenbruck, S., Guillon, O., Fattakhova–Rohlfing, D.:
Enabling metal substrates for garnet-based composite cathodes by laser sintering.
Applied Energy 345, 121335, (2023)
http://dx.doi.org/10.1016/j.apenergy.2023.121335

Schmitt, F.:
Soldering.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 587-598, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_24

Schneider, F.:
Remote Cutting.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 727-733, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_35

Schneider, F.:
High Speed Cutting.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 715-720, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_33

Schneider, F.:
Fusion Cutting.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 705-713, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_32

Schopphoven, T.:
Extreme High-Speed Laser Material Deposition—EHLA.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 431-436, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_11

Seme, B., Schneider, F.:
Sublimation Cutting.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 721-725, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_34 

Sider, A., Di Fronzo, C., Amez-Droz, L., Amorosi, A., Badaracco, F., Baer, P., Bertolini, A., Bruno, G., Cebeci, P., Collette, C., Ebert, J., Erben, B., Esteves, R., Ferreira, E., Gatti, A., Giesberts, M., Hebbeker, T., van Heijningen, J., Hennig, J., Hennig, M., Hild, S., Hoefer, M., Hoffmann, H., Jacques, L., Jamshidi, R., Joppe, R., Kuhlbusch, T., Lakkis, M., Lenaerts, C., Locquet, J., Loicq, J., Le Van, B., Loosen, P., Nesladek, M., Reiter, M., Stahl, A., Steinlechner, J., Steinlechner, S., Tavernier, F., Teloi, M., Vilaboa Pérez, J., Zeoli, M.:
E-TEST: a compact low-frequency isolator for a large cryogenic mirror.
Classical and Quantum Gravity 40(16), 165002 (28 S.) (2023)
http://dx.doi.org/10.1088/1361-6382/ace230 (Open Access)

Simeth, S., Müller, A., Müller, J., Lekitsch, B., Reininghaus, M., Schmidt-Kaler, F.
Selective laser-induced etching for 3D ion traps
SPIE LASE, 2023, San Francisco, California, United States, 28 January - 3 February 2023, San Francisco, California, United States.
Proceedings Volume 12409, Laser-based Micro- and Nanoprocessing XVII, 1240902 (2023).
http://dx.doi.org/10.1117/12.2647189

Singh, A.K., Mundada, Y., Bajaj, P., Wilms, M.B., Patil, J.P., Mishra, S.K., Arora, A.:
Microstructure engineering during directed energy deposition of Al-0.5Sc-0.5Si using heated build platform.
International Journal of heat and mass transfer 202, 123679- (2023)
https://doi.org/10.1016/j.ijheatmasstransfer.2022.123679

Steiner, M.F., Lohrer, P., Schopphoven, T., Häfner, C.L.:
Setup for electrical resistance measurement for laser material deposition with coaxial wire feed and use for process control
Journal of Laser Applications 33(1), 012002, (8 S.) (2023)
https://doi.org/10.2351/7.0000766

Lockner, Y., Buske, P., Rudack, M., Kheirandish, Z., Kröger, M., Stoyanov, S., Dokhanchi, S., Janowitz, J., Peitz, A., Rudolph, F., Hopmann, C., Bobzin, K., Heinemann, H., Kalscheuer, C., Carlet, M., Schulz, W.,:
mproving Manufacturing Efficiency for Discontinuous Processes by Methodological Cross-Domain Knowledge Transfer.
In: Brecher, C., Schuh, G., van der Aalst, W., Jarke, M., Piller, F.T., Padberg, M. (eds) Internet of Production. Interdisciplinary Excellence Accelerator Series. Springer, Cham., (33.S.), (2023)
http://dx.doi.org/10.1007/978-3-030-98062-7_8-1 (Open Access)

Traub, M.:
Beam Shaping for Laser Material Processing.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 239-244, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_3

Traub, M., Wissenberg, S., Westphalen, T., Klein, S., Ammersbach, J., Livrozet, M., Gronloh, B., Esser, D., Giesberts, M., Faidel, H., Mohr, D., Hoffmann, H., Haefner, C. L.
Highly reliable diode laser pump sources for the space qualified MERLIN laser platform and future wind LiDAR missions.
SPIE LASE, 28.1.-2.2.2023, San Francisco, California, United States. Proceedings Volume 12403, High-Power Diode Laser Technology XXI, 124030A (2023)
https://doi.org/10.1117/12.2657282

van der Straeten, K.:
Hybrid Lightweight Components.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 617-625, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_26

Vedder, C.:
Additive Manufacturing of Embedded Sensors.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 477-487, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_16

Vedder, C.:
Thin and Thick Film Processing.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 503-517, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_19

Vogelpoth, A., Saewe, J., Krull, H., Richert, S., Weiland, P., Nerzak, T., Eibl, F., Pastors, F.:
Additive Manufacturing of Tool Steels.
Steel Research International 94(4), 220372, (2023)
http://dx.doi.org/10.1002/srin.202200372 (Open Access)

Vogt, S.,  Weisheit, A., Wissenbach, K.:
Laser Softening of High-Strength Steels.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 489-492, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_5

Völl, A., Buske, P., Stollenwerk, J., Holly, C.:
Application-adapted beam shaping with cutting-edge optical elements in laser materials processing.
SPIE LASE, 2023, San Francisco, California, United States, 28.02-03.02.2023.
Proceedings Vol. 12414, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII, 124140H (2023).
http://dx.doi.org/10.1117/12.2664765

Weisheit, A.:
Materials for Additive Manufacturing.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 457-476, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_15

Wester, R.:
Physical Basics
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition., 2-202, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_1

Wissenbach, K., Seifer, M., Pirch, N., Weisheit, A.:
Laser Transformation Hardening.
In: Poprawe, R., Häfner, C., Wester, R. (eds) Tailored Light 2. RWTHedition, 279-302, Springer, Cham., (2023).
https://doi.org/10.1007/978-3-030-98323-9_6

Wilkens, Y., Ghavampour, E., Lantzsch, T.:
Influence Of Particle Size Variations And Nanoparticle Coating On Flow Behavior Of 316L Stainless Steel Powder And Mechanical Properties In Powder-based Additive Manufacturing.
Euro Powder Metallurgy 2023 Congress & Exhibition, 01-04 Okt, 2023, Lissabon. Euro PM2023 Proceedings - EPMA, 2023
http://dx.doi.org/10.59499/ep235761175

Abu-Shawareb, H., et al.:
Lawson Criterion for Ignition Exceeded in an Inertial Fusion Experiment.
PHYSICAL REVIEW LETTERS 129(7), 75001- (2022)
https://doi.org/10.1103/PhysRevLett.129.075001 (Open Access)

Adams, M., Holly, C., Rauch, S., Traub, M.:
Analysis of the Non-Injecting Mirror Concept for Feedback-Resistant High-Power Laser Diodes with a Multiphysics Model.
CLEO: Science and Innovations 2022, San Jose, California United States, 15–20 May 2022. Technical Digest Series (Optica Publishing Group, 2022), paper SS2D.1 (2 S.), (2022).
https://doi.org/10.1364/CLEO_SI.2022.SS2D.1

Adams, M., Rauch, S., Holly, C., Traub, M., Hoffmann, D.:
Multiphysics modeling of feedback-induced catastrophic optical damage in 9xx-nm high-power laser diodes.
SPIE LASE 2022 | San Francisco, California, United States | 22 Jan. - 28 Feb. 2022. Proceedings Volume 11983, High-Power Diode Laser Technology XX, 119830E, (9 S.) (2022)
https://doi.org/10.1117/12.2608103

Al-Juboori, H. M., Danylyuk, S.:
Design concepts of a new imaging system for a high-intensity XUV source beam by colour centres excitation in lithium fluoride crystals
Fifth International Conference on Applications of Optics and Photonics (AOP2022), July 18-22, 2022, Guimarães, Portugal.
Journal of Physics: Conference. Series 2407,012004
http://dx.doi.org/10.1088/1742-6596/2407/1/012004 (Open Access)

Babst, N., Isbell, L., Rommel, F., Tura, A., Ranjbar, M., Grisanti, S., Tschuch, C., Schueler, J., Doostkam, S., Reinacher, P., Duyster, J., Kakkassery, V., von Bubnoff, N.:
CXCR4, CXCR5 and CD44 May Be Involved in Homing of Lymphoma Cells into the Eye in a Patient Derived Xenograft Homing Mouse Model for Primary Vitreoretinal Lymphoma.
International Journal of Molecular Sciences 23(19 S.), 11757- (2022)
http://dx.doi.org/10.3390/ijms231911757 (Open Access)

Baer, P., Klein, S.; Raguse, M., Reiter, M., Giesberts, M., Fitzau, O., Hoffmann, H.-D:
Highly reflective Fiber Bragg Gratings in active Fibers for fiber-integrated Multi-Mode Resonators.
SPIE LASE, 2022, San Francisco, California, United States, 22 January -28. February 2022.
Proceedings Volume 11981, Fiber Lasers XIX: Technology and Systems, 1198114 - (5 S.) (2022)
https://doi.org/10.1117/12.2606583

Baer, P., Klein, S., Raguse, M., Giesberts, M., Reiter, M., Hoffmann, D.:
Monolithic highly Multi-Mode XLMA-Fiber Resonator for High Power Operation.
OPTICS EXPRESS 30(19), 33842-33849, (2022)
https://doi.org/10.1364/OE.464861 (Open Access)

Baer, P., Cebeci, P., Giesberts, M., Hoffmann, D.:
High stability fiber amplifiers for terrestrial and space sensing applications at 1 and 2 µm.
Optica Advanced Photonics Congress 2022, 25-28 Juni 2022, Busan, South Korea. Application of Lasers to Sensing and Free Space Communication (LS&C).
Technical Digest Series (Optica Publishing Group, 2022), LsM6C.6, (2022)
https://doi.org/10.1364/LSC.2022.LsM6C.6

Baer, P., Cebeci, P., Giesberts, M., Hoffmann, H-D., Loosen, P., ETpathfinder Konsortium:
ETpathfinder: a cryogenic testbed for interferometric gravitational-wave detectors.
Classical and Quantum Gravity 39(21), 215008- (2022)
https://doi.org/10.1088/1361-6382/ac8fdb (Open Access)

Barnowski, D., Dahmen, M., Farkas, T., Petring, D., Petschke, U., Pootz, M., Schäl, R.:
Multifunctional laser processing with a digital twin.
12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 September 2022, Fürth, Germany.
Procedia CIRP 111, c822-826, (2022).
https://doi.org/10.1016/j.procir.2022.08.091 (Open Access)

Barthels, T, Niessen, M., Heinigk, C.:
High-precision and simulation-based ultrashort pulsed laser processing of metals, Part III: Characterization of material properties,
SPIE LASE, 2022, San Francisco, California, United States.
Proceedings Volume 11989, Laser-based Micro- and Nanoprocessing XVI; 1198909 (2022).
https://doi.org/10.1117/12.2609603 .

Behler, K., Heußen, D., Kupper, M., Pirch, N., Lantzsch, T., Schleifenbaum, J.H.:
Energy coupling in laser powder bed fusion of copper using different laser wavelengths.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (? S.), (2022)

Belachew, N., Diebold, M., Reinacher, P., Prinz, M., Urbach, H., Erny, D., Taschner, C.:
Freiburg Neuropathology Case Conference.
Clinical Neuroradiology 32, 875-881, (2022)
http://dx.doi.org/10.1007/s00062-022-01195-6 (Open Access)

Bornschlegel, B., Kratz, M., Finger, J.:
In situ analysis of ultrashort pulse burst ablation via transmission pump probe imaging.
JOURNAL OF LASER MICRO/NANOENGINEERING 17(1), (9 S.)- (2022)
http://dx.doi.org/10.2961/jlmn.2022.01.2004 (Open Access)

Bremer, J., Linden, S., Zimmermann, M.:
Laserauftragschweißen mit künstlicher Intelligenz.
JOT Journal für Obenflächentechnik 62, 44-47, (2022)
http://dx.doi.org/10.1007/s35144-022-1542-1

Brosda, M., Nguyen, P., Olowinsky, A., Gillner, A.:
Investigations on the influence of the material selection of the clamping device during laser transmission welding of multi-layer polymer films with wavelength-adapted laser beam sources.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (5 S.), (2022)

Buske, P., Völl, A., Eisebitt, M., Stollenwerk, J., Holly, C.:
Advanced beam shaping for laser materials processing based on diffractive neural networks.
OPTICS EXPRESS 30(13), 22798-22816 (2022)
http://dx.doi.org/10.1364/oe.459460 (Open Access)

Cheng, Q., Shi, H., Jiang, Q., Yu, Z., Zhang, P., Ye, X.:
Effect of phase composition on microstructure and wear resistance of (Al16.80Co20.74Cr20.49Fe21.28Ni20.70)99.5Ti0.5 high-entropy alloy coatings.
Materials Today Communications 31, 103765- (2022)
http://dx.doi.org/10.1016/j.mtcomm.2022.103765

Chung, W.-S., Häusler, A., Hummel, M., Olowinsky, A., Gillner, A., Beckmann, F., Moosmann, J:
In-situ x-ray phase contrast observation of the full penetration spot welding on limited aluminum material thickness
Journal of Laser Applications 34(4), 042019, (2022),
https://doi.org/10.2351/7.0000772 (Open Access)

Clemens, M., Warnecke, L., Olschok, S., Reisgen, U., Steiner, M.:
Direction-independent laser-GMA hybrid welding with coaxial wire feed and annular beam.
Welding in the World, online (2022)
http://dx.doi.org/10.1007/s40194-022-01427-w (Open Access)

Coenen, V., Schlaepfer, T., Sajonz, B., Reinacher, P., Döbrössy, M., Reisert, M.:
“The Heart Asks Pleasure First”—Conceptualizing Psychiatric Diseases as MAINTENANCE Network Dysfunctions through Insights from slMFB DBS in Depression and Obsessive–Compulsive Disorder.
Brain Sciences 12(4), 438 (11 S.) (2022)
http://dx.doi.org/10.3390/brainsci12040438 (Open Accesss)

Coenen, V., Sajonz, B., Hurwitz, T., Böck, M., Hosp, J., Reinacher, P., Urbach, H., Blazhenets, G., Meyer, P., Reisert, M.:
A Neuroanatomy of Positive Affect Display – Subcortical Fiber Pathways Relevant for Initiation and Modulation of Smiling and Laughing.
Frontiers in Behavioral Neuroscience 16, (14 S.), (2022)
http://dx.doi.org/10.3389/fnbeh.2022.817554 (Open Access)

Coenen, V., Schlaepfer, T., Meyer, D., Kilian, H., Spanier, S., Sajonz, B., Reinacher, P., Reisert, M.:
Resolving dyskinesias at sustained anti-OCD efficacy by steering of DBS away from the anteromedial STN to the mesencephalic ventral tegmentum – case report.
Acta Neurochirurgica 164, (5 S.), (2022)
http://dx.doi.org/10.1007/s00701-022-05206-w (Open Access)

Csók, I., Grauvogel, J., Scheiwe, C., Bardutzky, J., Wehrum, T., Beck, J., Reinacher, P., Roelz, R.:
Basic Surveillance Parameters Improve the Prediction of Delayed Cerebral Infarction After Aneurysmal Subarachnoid Hemorrhage.
Frontiers in Neurology 13, 774720- (2022)
http://dx.doi.org/10.3389/fneur.2022.774720

Dahmen, M., Vedder, C., Baek, S., Stollenwerk, J.:
Dual-beam Laser-based Processing of Tribological Polymer Coatings.
Procedia CIRP 111, 257-260 (2022)
https://doi.org/10.1016/j.procir.2022.08.061 (Open Access)

Dahmen, M., Baumgartner, J., Möller, B., Olfert, V., Wagener, R.:
Joining technology and mechanical properties of laser-beam welded joints with martensitic chromium steels.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (11 S.), (2022)

Dahmen, M., Vedder, C., Speckens, M., Stollenwerk, J., Loosen, P.:
Influence of surface preheating and pretreatment on the adhesion of laser-melted PEEK to aluminum substrates.
SURFACE & COATINGS TECHNOLOGY 448128922- (2022)
https://doi.org/10.1016/j.surfcoat.2022.128922 (Open Access)

Dahmen, M., Deniz, B., Petring, D.:
Metallurgy of dissimilar laser beam welded lap joints of supra-ductile and ultra-high strength steels.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (9 S.), (2022)

Demerath, T., Stanicki, A., Rölz, R., Farina Nunez, M., Bissolo, M., Steiert, C., Fistouris, P., Coenen, V., Urbach, H., Fung, C., Beck, J., Reinacher, P.:
P55 Accuracy of augmented reality-guided (AR) drainage versus stereotactic and conventional puncture in an intracerebral hemorrhage phantom model.
Journal of NeuroInterventional Surgery 14(2), (2022)
http://dx.doi.org/10.1136/neurintsurg-2022-esmint.76 (Open Access)

Egger, K., Rau, A., Urbach, H., Reisert, M., Reinacher, P.:
3D X-ray based visualization of directional deep brain stimulation lead orientation.
Journal of Neuroradiology 49(3), 293-297, (2022)
http://dx.doi.org/10.1016/j.neurad.2021.05.002

Feng, J., Zhang, P., Jia, Z., Yu, Z., Fang, C., Yan, H., Shi, H., Tian, Y., Xie, F.:
Laser additive manufacturing and post-heat treatment on microstructure and mechanical properties of 9Cr steel.
International Journal of Pressure Vessels and Piping 198, 104681- (2022)
http://dx.doi.org/10.1016/j.ijpvp.2022.104681

Fink, S., Lübben, J., Schneller, T., Vedder, C., Böttger, U.:
Impact of the processing temperature on the laser-based crystallization of chemical solution deposited lead zirconate titanate thin films on short timescales.
JOURNAL OF APPLIED PHYSICS 131(12), 125302- (9 S.) (2022)
https://doi.org/10.1016/10.1063/5.0084953 (Open Access)

Fink, S., Dahmen, L., Vedder, C., Stollenwerk, J.:
Laser-based, direct formation of thin copper-nickel alloy films with low thermal coefficient of resistivity.
JOURNAL OF APPLIED PHYSICS 132(20), 205301- (2022)
https://doi.org/10.1063/5.0124000 (Open Access)

Fischer, F.G., Zimmermann, M.G., Praetzsch, N., Knaak, C.:
Monitoring of the powder bed quality in metal additive manufacturing using deep transfer learning.
Materials and Design 222, 111029, (17 S.), (2022)
https://doi.org/10.1016/j.matdes.2022.111029 (Open Access)

Fischer, T., Kuhn, B., Fan, X., Wilms, M.B.:
Additive Manufacturing Potentials of High Performance Ferritic (HiperFer) Steels.
Applied Sciences 12(14), 7234 (2022)
https://doi.org/10.3390/app12147234 (Open Access)

Fistouris, P., Scheiwe, C., Grauvogel, J., Csók, I., Beck, J., Reinacher, P., Roelz, R.:
Mitigation of Blood Load Impact in Patients with Subarachnoid Hemorrhage by Cisternal Lavage.
Cerebrovascular Diseases, 1-7, (2022)
http://dx.doi.org/10.1159/000521203

Fricke-Begemann, C., Schreckenberg, F., Geisler, M., Lindemann, M.:
Laser sensors enable robotic sorting for tool alloys recycling.
9th Sensor-Based Sorting & Control 2022, 13.04-14.04.2022, Düren.
Greiff, K., Wotruba, H., Feil, A., Kroell, N., Chen, X., Gürsel, D.,Merz, V. (Hrsg.): 9th Sensor-Based Sorting & Control 2022, 273-280, (2022).
http://dx.doi.org/10.2370/9783844085457

Froh, J., Höffner, J., Mauer, A., Mense, T.H., Eixmann, R., Lübken, F.J., Munk, A., Strotkamp, M., Jung, M.:
Aerosol measurements in the tropo- and stratosphere by spectral splitting of Rayleigh and Mie signals within a compact lidar of 1 m3
SPIE Remote Sensing, 2022, Berlin, Germany.
Proceedings Volume 12265, Remote Sensing of Clouds and the Atmosphere XXVII; 122650C (2022).
https://doi.org/10.1117/12.2636289

Fu, C., Stollenwerk, J., Holly, C.:
Reinforcement learning for guiding optimization processes in optical design.
SPIE Optical Engineering + Applications, 2022, San Diego, California, United States.
Proceedings Volume 12227, Applications of Machine Learning 2022; 1222709 (2022)
http://dx.doi.org/10.1117/12.2632425

Fiedler, W., Schulze, F.:
Fugenfolgeregelung für das Fügen mit Laserstrahlung mittels koaxialer texturbasierter Bildverarbeitung.
DVS CONGRESS 2022 Große Schweißtechnische Tagung, 19. – 21.09.2022 Koblenz.
In: DVS CONGRESS 2022 Große Schweißtechnische Tagung, DVS Berichte 382, 371-378 (2022).

Geus, J.F., Elsen, F., Nyga, S., Jungbluth, B., Hoffmann, H., Häfner, C.:
Frequency down-conversion for efficient, low-noise quantum frequency converters.
SPIE OPTO, 2022, San Francisco, California, United States | 22 January - 28 February 2022.
Proceedings Volume 12015, Quantum Computing, Communication, and Simulation II; 1201506 (2022)
https://doi.org/10.1117/12.2607750

Grubert, N., Lange, O., Stollenwerk, J., Holly, C.:
Optomechanische Toleranzangaben aus dem Optikdesign nach ISO-GPS-Norm.
123. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 7.-11.Juni 2022, Pforzheim. DGaO-Proceedings 123_A32 (2022)
urn:nbn:de:0287-2022-A032-7

Grubert, N., Hofmann, O., Hesker, M., Stollenwerk, J., Holly, C.:
Beam shaping for large-area laser structuring in a roll-to-roll process.
SPIE Optical Engineering + Applications 21-26 August 2022, San Diego, California, United States.
Proceedings Volume 12216, Novel Optical Systems, Methods, and Applications XXV; 1221604 (2022).
https://doi.org/10.1117/12.2632926

Haasler, D., Gillner, A.:
Development of a deep drilling process in metals by means of ultrashort laser pulses.
SPIE LASE, 2022 Jan. 21-28, San Francisco, California, United States.
Proceedings Volume 11994, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XI; 119940I (2022).
http://dx.doi.org/10.1117/12.2625590

Haddad, E., Chung, W., Katz, O., Helm, J., Olowinsky, A., Gillner, A.:
Laser micro welding with fiber lasers for battery and fuel cell based electromobility.
Journal of Advanced Joining Processes 5, (8 S.), (2022)
http://dx.doi.org/10.1016/j.jajp.2021.100085 (Open Access)

Halm, U., Schulz, W.:
3D simulation of spatial and temporal modulation in laser beam fusion cutting.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (6 S.), (2022)

Heinigk, C., Barthels, T., Schulz, W., Nießen, M.:
A multi-scale model for ultra-short pulsed parallel laser structuring: part II. the macro-scale model.
Optical Engineering 61(9), 095103- (2022)
http://dx.doi.org/10.1117/12.2608151 (Open Access)

Hoff, L.C., Scheld, W.S., Vedder, C., Stollenwerk, J.:
Laser sintering of ceramic-based solid-state battery materials.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (7 S.), (2022)

Hoffmann, A., Kreuels, K., Gillner, A.:
Novel Thiol‐Ene Photo Resins for Stereolithography with Enhanced Mechanical and Optical Properties.
Macromolecular Materials and Engineering, 2100625- (2022)
http://dx.doi.org/10.1002/mame.202100625 (Open Access)

Hollatz, S., Hummel, M., Olowinsky, A., Gillner, A., Beckmann, F., Moosmann, J.:
Pore Formation and Melt Pool Analysis of Laser Welded Al-Cu Joints using Synchrotron Radiation.
Journal of Materials Processing Technology 309, 117738-, (8 S.), (2022)
https://doi.org/10.1016/j.jmatprotec.2022.117738 (Open Access)

Hopmann, C.; Holly, C.; Stollenwerk, J.; Liu, B.; Gerads, J.; Hofmann, J.:
Development of a coupled thermo-optical process optimization routine for plastic lenses in laser applications.
31st International Colloquium Plastics Technology, 7 –  8 Sept. 2022, Aachen. 31st International Colloquium Plastics Technology, S. 330-344, (2022)

Huang, H., Zhang, P., Tang, M., Shen, L., Yu, Z., Shi, H., Tian, Y.:
Biocompatibility of micro/nano structures on the surface of Ti6Al4V and Ti-based bulk metallic glasses induced by femtosecond laser.
Biomaterials Advances 139, 212998- (2022)
http://dx.doi.org/10.1016/j.bioadv.2022.212998

Huang, H., Zhang, P., Yu, Z., Shen, L., Shi, H., Tian, Y.:
Femtosecond laser-induced transformation mechanism from 1D groove structure to 2D microholes structure on the surface of Zr-based metallic glasses.
OPTICS AND LASER TECHNOLOGY 146, 107555- (2022)
https://doi.org/10.1016/j.optlastec.2021.107555

Hummel, M., Häusler, A., Hollatz, S., Hagenlocher, C., Lind, J., Halm, U., Schöler, C., Olowinsky, A., Gillner, A.:
Temporally and spatially highly resolved reconstruction of vapor capillary geometry during laser beam welding using synchrotron radiation.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, 979-989, (11 S.), (2022)

Itner, D., Nießen, M., Vossen, G.:
Mathematical modeling and stability analysis for laser cutting via asymptotic expansion.
International Journal of Mechanical Sciences 219, 107062- (2022)
http://dx.doi.org/10.1016/j.ijmecsci.2021.107062

Jiang, Q., Zhang, P., Yu, Z., Tian, Y., Ma, S.:
AlCoCrFeNi high entropy alloy fabricated via selective laser melting reinforced by Fe-based metallic glass.
Materials Letters 307, 130994- (2022)
https://doi.org/10.1016/j.matlet.2021.130994

Jung, M., Kukkala, S., Willenborg, E.:
Reduction of process-induced Waviness in Laser Polishing of Fused Silica by a Thermography-base Process Control.
Laser Applications Conference 2022, Barcelona Spain, 11–15 December 2022.  Technical Digest Series (Optica Publishing Group, 2022), paper LM2B.1, (2022)
http://dx.doi.org/10.1364/lac.2022.lm2b.1

Kang, S.-G., Gainov, R., Heußen, D., Bieler, S., Sun, Z., Weinberg, K., Dehm, G., Ramachandramoorthy, R.:
Green laser powder bed fusion based fabrication and rate-dependent mechanical properties of copper lattices.
ArXiv, 2210.13087, 31 S. (2022).
https://doi.org/10.48550/arXiv.2210.13087 (Open Access)

Kelbassa, J, Biber, A. Steiner, M.F.:
Process development and mechanical properties of Ti-6Al-4V samples generated by laser material deposition with coaxial wire feed.
Journal of Laser Applications 34 (2), 022003, (2022)
https://doi.org/10.2351/7.0000491

Klingler, J., Naseri, Y., Reinacher, P., Hoedlmoser, H., Urbach, H., Hohenhaus, M.:
Patient radiation exposure from intraoperative computed tomography in spinal surgery.
The Spine Journal, Article 22(9), 1576-1578 (2022)
http://dx.doi.org/10.1016/j.spinee.2022.03.008

Knaak, C., Edler von Querfurth, B., Hollatz, S., Duong, E., Abels, P., Olowinsky, A.:
Defect localization during laser microwelding of battery connectors using long exposure imaging and few-shot learning.
12th CIRP Conference on Photonic Technologies [LANE 2022] 111, 790-795, (2022).
https://doi.org/10.1016/j.procir.2022.08.130 (Open Access)

Kogias, E., Altenmüller, D., Karakolios, K., Egger, K., Coenen, V., Schulze-Bonhage, A., Reinacher, P.:
Electrode placement for SEEG: Combining stereotactic technique with latest generation planning software for intraoperative visualization and postoperative evaluation of accuracy and accuracy predictors.
Clinical Neurology and Neurosurgery 213, 107137- (2022)
http://dx.doi.org/10.1016/j.clineuro.2022.107137

Kreinest, L., Schober, B., Willenborg, E., Schleifenbaum, J.H.:
Structuring by laser remelting as a method for waviness reduction on additive manufactured parts.
Procedia CIRP 111, 689-692, (2022).
https://doi.org/10.1016/j.procir.2022.08.010 (Open Access)

Kreuels, K., Al Enezy-Ulbrich, M.A., Nottrodt, N., Pich, A., Gillner, A.:
Quantifying the Adhesion of Hydrogels to Polymers for theFabrication of Hybrid Biomaterial Constructs.
BIOMEDIZINISCHE TECHNIK 66, S1, 183, (2022)
https://doi.org/10.1515/bmt-2022-2001

Kumstel, J., Roosmawangca, P.R.:
Laserstrahlumschmelzen von Blechkanten.
SCHWEIßEN UND SCHNEIDEN 74(6), 392-395 (2022)

Kunz, L., Staresina, B., Reinacher, P.C., Brandt, A., Guth, T.G., Schulze-Bonhage, A., Jacobs, J.:
Ripple-locked coactivity of stimulus-specific neurons supports human associative memory.
bioRXiv, (72 S.), (2022)
https://doi.org/10.1101/2022.10.17.512635 (Open Access)

Lanfermann, A., Barthels, T., Nießen, M., Abels, P., Klass, G., Riester, C., Pham, T.Q., Steffens, O.:
Innovative Filtermodule für die Abscheidung von Mikroplastik aus Abwasser.
GWF: Wasser, Abwasser 163 (2), 51-54 (2022)

Lanfermann, A., Barthels, T., Nießen, M., Abels, P., Klass, G., Riester, C., Pham, T.Q., Steffens:, O.:
INNOVATIVE FILTER MODULE TO SEPARATE MICROPLASTICS FROM WASTEWATER – SIMCONDRILL.
FILTECH 2022, 8-10. March 8-10, 2022, Cologne, Germany.
FILTECH: March 8-10, 2022, Cologne, Germany: the filtration event, 10 S., (2022)

Lantzsch, T., Heussen, D., Praetzsch, N., Haefner, C.:
Evaluation of productivity scaling approaches for laser powder bed fusion of nickel-base alloy 625.
SPIE LASE, 2022, San Francisco, California, United States. Proceedings Volume 11994, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XI, 1199405 (2022)
https://doi.org/10.1117/12.2611151

Linden, S., Kreinest, L., Willenborg, E.:
CAM-NC-Datenkette für die effiziente 3D-Bearbeitung.
JOT Journal für Oberflächentechnik 62, 58-61,(2022)
https://doi.org/10.1007/s35144-022-1651-x

Li, T., Zhang, L., Chen, G., Schopphoven, T., Gasser, A., Poprawe, R.:
Process Prediction for Repair of High-Speed Train Wheelseat Axle by Extreme High-Speed Laser Material Deposition (EHLA).
ASME 2021 International Mechanical Engineering Congress and Exposition, Nov 1-5 2021, Online.
Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition (IMECE2021), Volume 2A, (2022)

Li, T.; Zhang, L.; Chen, G.; Pirch, N.; Schopphoven, T.; Gasser, A.; Poprawe, R.:
A combined heat source model for the prediction of residual stress post extreme high-speed laser material deposition.
Journal of Manufacturing Processes 78, 265-277, (2022)
https://doi.org/10.1016/j.jmapro.2022.03.055

Li, Z., Ma, X., Zhong, C., Sui, S., Gasser, A., Chen, J.:
Microstructure homogeneity and mechanical property improvement of Inconel 718 alloy fabricated by high-deposition-rate laser directed energy deposition.
MATERIALS SCIENCE AND ENGINEERING A 832, 142430- (2022)
http://dx.doi.org/10.1016/j.msea.2021.142430

Li Z., Sui S., Ma X., Tan H., Zhong C., Bi G., Clare A., Gasser A., Chen J.:
High deposition rate powder- and wire-based laser directed energy deposition of metallic materials: A review.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE 181, 103942, (35 S.), (2022)
https://doi.org/10.1016/j.ijmachtools.2022.103942

Liu, Z., Zhang, P., Yan, M., Yu, Z., Tian, Y., Wu, D.:
Study of mode transition in three-dimensional laser beam oscillating welding of aluminum alloy.
Journal of Materials Processing Technology 303, 117490- (2022)
http://dx.doi.org/10.1016/j.jmatprotec.2022.117490

Li, Z., Lin, X., Zhao, X., Ma, X., Hao, Z., Yao, B., Zhong, C., Gasser, A., Tan, H., Sui, S., Chen, J.:
Introducing a Single Crystal Structure in Polycrystalline Inconel 718 Superalloy Via Laser Directed Energy Deposition. (2023)
Available at SSRN: https://ssrn.com/abstract=4265492 or
http://dx.doi.org/10.2139/ssrn.4265492 (Open Access)

Lüttgenau, B., Panitzek, D., Danylyuk, S., Brose, S., Stollenwerk, J., Loosen, P., Holly, C.:
Design of an efficient illuminator for partially coherent sources in the extreme ultraviolet.
APPLIED OPTICS 61(11), 3026-3033 (2022)
http://dx.doi.org/10.1364/ao.452204 (Open Access)

Maischner, D., Weisheit, A., Rass, I., Kolberg, J., Kolberg, T.:
Laser based metallization of materials with low wettability for joining of hybrid material combinations.
LÖT 2022, 13th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, 21-23.6.22, Aachen, Germany. LÖT 2022, 13th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, 21-23.6.22, Aachen, Germany (DVS-Berichte 381), 221-225, (2022).

Mokrov, O., Marek, S., Sharma, R., Reisgen, U., Schöler, C.: Niessen, M., Schulz, W.;
lncrease in understanding of the welding process through simulation of laser beam and gas-shielded metal arc welding.
WELDING AND CUTTING 22(1), 56-63 (2022)

Munk, J.; Breitbarth, E.; Siemer, T.; Pirch, N.; Häfner, C.L.:
Geometry Effect on Microstructure and Mechanical Properties in Laser Powder Bed Fusion of Ti-6Al-4V.
Metals 12(3), 482, (18 S.), (2022)
https://doi.org/10.3390/met12030482 (Open Access)

Noll, R.:
Unsichtbares sehen. Die Laserspektroskopie revolutioniert die chemische Materialanalyse und hilft dadurch, Ressourcen zu schonen.
Physik Journal 21, 35-39 (2022).

Nüsser, C., Willenborg, E.:
High-speed laser micro polishing of TiAl6V4.
Journal of Laser Applications 34(1), 012025- (2022)
https://doi.org/10.2351/7.0000383 (Open Access)

Oeser, S., Preußner, J., Rödler, G., Pirch, N., Weisheit, A.:
Laser Metal Deposition of a Near-Eutectic Al-Ni Alloy.
ADVANCED ENGINEERING MATERIALS 24(12), 2200696, (10 S.) (2022)
https://doi.org/10.1002/adem.202200696 (Open Access)

Pongratz L., Vannahme, K.:
Beam Shaping the Direct Laser Interference Patterning Spot.
Journal of Laser Micro/Nanoengineering 17(1), 42-49 (2022)
https://doi.org/10.2961/jlmn.2022.01.2007 (Open Access)

Pongratz, L.; Lantzsch, T.; Schwedt, A.:
Impact on surface topography of interference patterned steel and brass using an ultrashort pulsed laser source.
Journal of Laser Applications 34 (3), 03^1201 (11 S.) (2022)
https://doi.org/10.2351/7.0000555

Raguse, M., Klein, S., Baer, P., Giesberts, M., Traub, M., Hoffmann, H-D.:
Investigations on high-reflective Fiber-Bragg-Gratings in multimode fibers.
OSA Continuum 1(5), 965-973, (2022)
https://doi.org/10.1364/OPTCON.450150 (Open Access)

Rehberger, M., Mertin, J., Vedder, C., Stollenwerk, J., Schleifenbaum, J.:
Rotation Grids for Improved Electrical Properties of Inkjet-Printed Strain Gauges.
Sensors 22(16), 6119- (2022)
http://dx.doi.org/10.3390/s22166119 (Open Access)

Reinacher, P.C., Cimniak, A., Demerath, T., Schallner, N.:
Usage of augmented reality for interventional neuraxial procedures: A phantom-based study.
European Journal of Anaesthesiology 39,1-9 (2022)
https://doi.org/10.1097/EJA.0000000000001755

Reinheimer, E. N., Hummel, M., Olowinsky, A., Weber, R., Graf, T.:
High-speed synchrotron x-ray imaging of the formation of wedge-shaped capillaries during laser-beam welding at high feed rates.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (7 S.), (2022)

Reisert, M., Sajonz, B., Brugger, T., Reinacher, P., Russe, M., Kellner, E., Skibbe, H., Coenen, V.:
Where Position Matters—Deep-Learning–Driven Normalization and Coregistration of Computed Tomography in the Postoperative Analysis of Deep Brain Stimulation.
Neuromodulation: Technology at the Neural Interface, online first,- (2022)
https://doi.org/10.1016/j.neurom.2022.10.042

Rittinghaus, S.-K., Hama-Saleh, R., Brunn, O., Salit, V., Mokulys, T.:
Laser Additive Manufacturing of Iron-Aluminum for Hybrid Steam Turbine Blades.
ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, June 13–17, 2022, Rotterdam, Netherlands.
Proceedings Vol 7 Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Microturbines, Turbochargers, and Small Turbomachines; Oil & Gas Applications, GT2022-81956, V007T17A010, 9 S., (2022).
https://doi.org/10.1115/GT2022-81956

Rittinghaus, S-K., Ali, A., Hecht, U.:
Intrinsic Heat Treatment of an Additively Manufactured Medium Entropy AlCrFe2Ni2-Alloy.
Metals and Materials International 29, 579-590, (2022)
https://doi.org/10.1007/s12540-022-01246-0 (Open Access)

Roelz, R., Scheiwe, C., Grauvogel, J., Csok, I., Coenen, V., Beck, J., Reinacher, P.:
Early cisternal fibrinolysis is more effective than rescue spasmolysis for the prevention of delayed infarction after subarachnoid haemorrhage.
Stroke and Vascular Neurology 7(2), 108-113, (2022)
http://dx.doi.org/10.1136/svn-2021-001146 (Open Access)

Schaible, J., Hausch, D., Schopphoven, T., Häfner, C.:
Deposition strategies for generating cuboid volumes using extreme high-speed directed energy deposition.
Journal of Laser Applications 34(4), 42034- (2022)
http://dx.doi.org/10.2351/7.0000770 (Open Access)

Scheerer, F., Jacobs-LeVan, J., Metzger, S.M., Schönberger, J., Wagner, K., Schulze-Bonhage, A., Reinacher, P.C., Klotz, K.A.:
Lateralizing signs in patients with Hypothalamic Hamartoma.
Epilepsia 63(S2), 101- (2022)
https://doi.org/10.1111/epi.17388 (Open Access)

Scheld, W., Lobe, S., Uhlenbruck, S., Dellen, C., Sohn, Y., Hoff, L., Vondahlen, F., Guillon, O., Fattakhova-Rohlfing, D.:
Rapid thermal sintering of screen-printed LiCoO2 films.
THIN SOLID FILMS 749, 139177- (2022)
http://dx.doi.org/10.1016/j.tsf.2022.139177

Schröder, S., Bahrenberg, L., Lüttgenau, B., Glabisch, S., Danylyuk, S., Brose, S., Stollenwerk, J., Loosen, P., Holly, C.:
Latent image characterization by spectroscopic reflectometry in the extreme ultraviolet.
JOURNAL OF MICRO/NANOPATTERNING, MATERIALS, AND METROLOGY 21(2), 021208, (2022)
https://doi.org/10.1117/1.JMM.21.2.021208 (Open Access)

Schubnell, J., Dahmen, M., Luke, M.,
Strength improvement of laser beam welded joints in cold worked High-Manganese-steel by means of deep rolling.
12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 September 2022, Fürth, Germany. Procedia CIRP 111, 457-461 (2022).
https://doi.org/10.1016/j.procir.2022.08.065 (Open Access)

Singh, A. K., Mundada, Y., Bajaj, P., Wilms, M. B., Jägle, E. A., Raabe, D.:
Investigation of temperature distribution and solidification morphology in multi-layered directed energy deposition of Al-0.5Sc-0.5Si alloy.
International Journal of Heat and Mass Transfer 186, 122492- (2022)
https://doi.org/10.1016/j.ijheatmasstransfer.2021.122492

Steiert, C., Behringer, S., Kraus, L., Bissolo, M., Demerath, T., Beck, J., Grauvogel, J., Reinacher, P.:
Augmented reality–assisted craniofacial reconstruction in skull base lesions — an innovative technique for single-step resection and cranioplasty in neurosurgery.
Neurosurgical Review (2022)
http://dx.doi.org/10.1007/s10143-022-01784-6 (Open Access)

Steiner, M.F., Speier, M., Kelbassa, J., Schopphoven, T., Häfner, C.L.:
Influence of tool path planning on process stability and deposition accuracy in laser material deposition with coaxial wire feed.
Journal of Laser Applications 34(1), 012026 - (2022)
https://doi.org/10.2351/7.0000483

Steiner, M.F., Clemens, M., Olschok, S., Reisgen, U., Kelbassa, J.,  Schopphoven, T., Haefner, C.L.,
Richtungsunabhängiges Laser-MSG-Hybridschweißen mit Ringfokus und koaxialer Drahtzuführung für das Verbindungsschweißen und die additive Fertigung.
DVS Congress 2022,19. – 21. September 2022, Koblenz. DVS CONGRESS 2022 Große Schweißtechnische Tagung DVS CAMPUS (DVS-Berichte, 382), S. 730-736, (2022)

Steiner, M.F., Meyer, P., Riessner, L., Clemens, M., Olschok, S., Kelbassa, J., Schopphoven, T., Haefner, C.L.:
Koaxiales Laser Lichtbogen Hybridschweißen als additives Verfahren - COLLAR Hybrid AM.
#additivefertigung: Metall in bestForm, 26.-27. Oktober 2022, Essen. #additivefertigung: Metall in bestForm (DVS-Berichte, 383), S. 129-134, (2022)

Straehle, J., Erny, D., Neidert, N., Heiland, D., El Rahal, A., Sacalean, V., Steybe, D., Schmelzeisen, R., Vlachos, A., Mizaikoff, B., Reinacher, P., Coenen, V., Prinz, M., Beck, J., Schnell, O.:
Neuropathological interpretation of stimulated Raman histology images of brain and spine tumors: part B.
Neurosurgical Review 45(2), 1721-1729, (2022)
http://dx.doi.org/10.1007/s10143-021-01711-1 (Open Access)

Tarancón, A., Esposito, V., Torrell, M., Di Vece, M., Son, J.S., Norby, P., Bag, S., Grant, P.S., Vogelpoth, A.,  Linnenbrink, S., Brucki, M., Schopphoven, T., Gasser, A., Persembe, E., Koufou, D., Kuhn, S., Ameloot, R., Hou, X.,  Engelbrecht, K., Bahl, C.R.G`H., Pryds, N., Wang, J., Tsouris, C., Miramontes, E., Love, L., Lai, C., Sun, X., Kærn, M.R.,  Criscuolo, G., Pedersen, D.B.:
2022 roadmap on 3D printing for energy.
Journal of Physics-Energy 4,11501, (2022)
https://doi.org/10.1088/2515-7655/ac483d (Open Access)

Temmler, A., Cortina, M., Ross, I., Küpper, M., Rittinghaus, S.:
Evolution of Surface Topography and Microstructure in Laser Polishing of Cold Work Steel 1.2379 (AISI D2) Using Quadratic, Top-Hat Shaped Intensity Distributions.
Materials 15(3), 769-(27 S.), (2022)
https://doi.org/10.3390/ma15030769 (Open Access)

Trenn, M., Hoff, L.C., Delmdahl, R., Greiber, M., Lange, K., Vedder, C.:
Excimer laser sintering of ceramic thin films for solid state batteries.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (6 S.), (2022)

Ünal-Saewe, T., Vedder, C., Vervoort, S., Schleifenbaum, J.H. :
Digital Twins in the Product Life Cycle of Additively Manufactured Components.
In: Frenz, W. (eds) Handbook Industry 4.0. Springer, Berlin, 491–501, (2022).
https://doi.org/10.1007/978-3-662-64448-5_25

Vogelpoth, A., Saewe, J., Krull, H.G., Richert, S., Weiland, P., Nerzak, T., Eibl, F., Pastors, F.:
Additive manufacturing of tool steels.
Steel Research International 9, 2200372, (5 S.), (2022)
https://doi.org/10.1002/srin.202200372 (Open Access)

Wagner, J., Hagenlocher, C. , Hummel, M. D. , Olowinsky, A., Weber, R., Graf T.:
High-speed synchrotron X-ray investigation of full penetration welding of aluminum sheets.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, 604-608, (5 S.), (2022)

Weiss, C., Haefner, C., Munk, J.:
On the Influence of AlSi10Mg Powder Recycling Behavior in the LPBF Process and Consequences for Mechanical Properties.
JOM 74(3), 1188-1199, (2022)
http://dx.doi.org/10.1007/s11837-021-05080-4 (Open Access)

Weiss, C., Heslenfeld, J., Saewe, J., Bremen, S., Häfner, C.:
Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF).
Procedia CIRP 111, (6 S.), (2022)
http://dx.doi.org/10.1016/j.procir.2022.08.102 (Open Access)

Weiss, C., Boedger, C. , Schiefer, E., Heussen, D. , Haefner, C.L.:
Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion.
2022 International Solid Freeform Fabrication Symposium, August 14-16, 2023  Austin, Texas USA. : Proceedings of the 33rd Annual International, 921-942 (2022)
http://dx.doi.org/10.26153/tsw/44578 (Open Access)

Wendt, C., Dahmen, M, Olfert, V., Sagel, A.:
Joining ultra-high strength steels by edge welds.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (12 S.), (2022)

Wesselmecking, S., Kreins, M., Dahmen, M., Bleck, W.:
Material oriented crash-box design – Combining structural and material design todoc_improve specific energy absorption.
Materials and Design 213, 110357- (2022)
https://doi.org/10.1016/j.matdes.2021.110357 (Open Access)

Wilms, M.B., Pirch, N., Gökce, B.:
Manufacturing oxide-dispersion-strengthened steels using the advanced directed energy deposition process of high-speed laser cladding.
Prog Addit Manuf 8, 159–167 (2022)
https://doi.org/10.1007/s40964-022-00319-1 (Open Access)

Wu D., Zhang P., Yu Z., Gao Y., Zhang H., Chen H., Chen S., Tian Y.:
Progress and perspectives of in-situ optical monitoring in laser beam welding: Sensing, characterization and modeling.
Journal of Manufacturing Processes 75, 767-791 (2022)
https://doi.org/10.1016/j.jmapro.2022.01.044

Würtemberger, U., Diebold, M., Erny, D., Hosp, J., Schnell, O., Reinacher, P., Rau, A., Kellner, E., Reisert, M., Urbach, H., Demerath, T.:
Diffusion Microstructure Imaging to Analyze Perilesional T2 Signal Changes in Brain Metastases and Glioblastomas.
Cancers 14(5), 1155, (2022)
http://dx.doi.org/10.3390/cancers14051155 (Open Access)

Würtemberger, U., Rau, A., Reisert, M., Kellner, E., Diebold, M., Erny, D., Reinacher, P., Hosp, J., Hohenhaus, M., Urbach, H., Demerath, T.:
Differentiation of Perilesional Edema in Glioblastomas and Brain Metastases: Comparison of Diffusion Tensor Imaging, Neurite Orientation Dispersion and Density Imaging and Diffusion Microstructure Imaging.
Cancers 15(1), 129, (2022)
http://dx.doi.org/10.3390/cancers15010129 (Open Access)

Wurzbacher, S., Mascher, M., Wagner, P., van der Straeten, K., Jüptner, U., Hopmann, C.:
Development of micro-form-fitted amorphous thermoplast/light metal hybrid components.
Materials Science & Engineering Technology 54(3), 255-266, (2022)
https://doi.org/10.1002/mawe.202100346 (Open Access)

Xu, X.; Zhang, D.; Deng, J.; Wu, X.; Li, L.; Xie, Y.; Poprawe, R.;   Schleifenbaum, J.H.; Ziegler, S.:
Numerical simulation in the melt pool evolution during L-PBF process for Ti6Al4V.
Materials15(21), 7585- (2022)
https://doi.org/10.3390/ma15217585 (Open Access)

Zhang, D., Yi, D., Wu, X., Liu, Z., Wang, W., Poprawe, R., Schleifenbaumc, J., Zieglerd, S.:
SiC reinforced AlSi10Mg composites fabricated by selective laser melting.
Journal of Alloys and Compounds 894, 162365- (2022)
http://dx.doi.org/10.1016/j.jallcom.2021.162365

Zhao, T., Chen, T., Wang, Y., Wang, M., Bakir, M., Dahmen, M., Gasser, A., Häfner, C.L.:
Laser Directed Energy Deposition of an AlMgScZr-Alloy in High-Speed Process Regimes.
SSRN: https://ssrn.com/abstract=4059735 or 
http://dx.doi.org/10.2139/ssrn.4059735

Zhong, C., Gasser, A., Backes, G., Fu, J., Schleifenbaum J.H.:
Laser additive manufacturing of Inconel 718 at increased deposition rates.
MATERIALS SCIENCE AND ENGINEERING A 844,143196- (2022)
https://doi.org/10.1016/j.msea.2022.143196

Zhong, C., Backes, G., Johann, L.M., Kittel, J., Schopphoven, T., Küppers, W.:
Development of a novel green coating process with laser.
Scientific Reports 12, 6314- (2022)
https://doi.org/10.1038/s41598-022-10351-4 (Open Access)

Zuric, M., Brenner, A.:
Real-time defect detection through lateral monitoring of secondary process emissions during ultrashort pulse laser microstructuring.
Optical Engineering 61(9), 094101- (16 S.), (2022)
https://doi.org/10.1117/1.OE.61.9.094101 (Open Access)

Adams, M., Holly, C., Rauch, S., Traub, M.:
GPU-Accelerated Wave-Optical Model for External-Cavity Diode Lasers.
OPTICS LETTERS 46(7), 1780-1783, (2021)
https://doi.org/10.1364/OL.419225

Adams M., Rauch S., Holly, C., Traub M., Hoffmann D.:
Modeling of the impact of current crowding on catastrophic optical damage in 9xx-nm high power laser diodes.
SPIE Photonics West, LASE, High-Power Diode Laser Technology XIX, 6-12 MARCH 2021, online only.
Proceedings Volume 11668, High-Power Diode Laser Technology XIX; 116680C (9 S.), (2021)
https://doi.org/10.1117/12.2578092

Adams, M., Holly, C., Rauch S., Schwarz T., Traub M.:
Modeling of influencing factors driving thermal runaway in 9xx-nm high-power laser diodes.
27th International Semiconductor Laser Conference (ISLC) 2021,  10-14 Oct. 2021, Potsdam, Germany.
Proc. of 2021 27th International Semiconductor Laser Conference (ISLC), 1-2, (2021)
http://dx.doi.org/10.1109/islc51662.2021.9615699

Asabre, A., Wilms, M. B., Kostka, A., Gemagami, P., Weisheit, A., Pfetzing-Micklich, J., Laplanche, G.:
Laser metal deposition on a tool steel of an Al0.6CoCrFeNi compositionally complex alloy with Ti & C additions using elemental powder blends.
SURFACE AND COATINGS TECHNOLOGY 418, 127233- (13 S.)(2021)
https://doi.org/10.1016/j.surfcoat.2021.127233 (Open Access)

Bambach, M., Ünsal, I., Sviridov, A., Hama-Saleh, R., Weisheit, A.:
Hybrid manufacturing of sheet metals and functionalizing for joining applications via hole flanging.
Production Engineering: Research and development 15, 223-233 (2021)
http://dx.doi.org/10.1007/s11740-020-01016-0

Baumgartner, J, Dahmen, M., Deniz, B., Häfner, C., Melz, T.: Meschut, G., Möller, B., Olfert, V., Reis. P.:
Studie zur fügetechnischen Absicherung und technischen Auslegung von Schweißverbindungen mit martensitischen Chromstählen.
FOSTA-Berichte P 1175, 199 S. (2021)
978-3-96780-035-7

Becker, J., Schmigalla, S., Schultze, S., Rittinghaus, S., Weisheit, A., Schmelzer, J., Krüger, M.:
High Temperature Oxidation Performance of an Additively Manufactured Mo–9Si–8B Alloy.
Oxidation of Metals (15 S.)- (2021)
http://dx.doi.org/10.1007/s11085-021-10082-3 (Open Access)

Berges, J. M., van der Straeten, K., Jacobs, G., Berroth, J., Gillner, A.:
Model-Based Estimation of the Strength of Laser-Based Plastic-Metal Joints Using Finite Element Microstructure Models and Regression Models.
Materials 14(17), 5004- (13 S.) (2021)
https://doi.org/10.3390/ma14175004 (Open Access)

Bieler, S., Kang, S., Heußen, D., Ramachandramoorthy, R., Dehm, G., Weinberg, K.:
Investigation of copper lattice structures using a Split Hopkinson Pressure Bar.
PAMM 21(1), e202100155- (3 S.), (2021)
http://dx.doi.org/10.1002/pamm.202100155 (Open Access)

Bissolo, M., Scheiwe, C., Csók, I., Grauvogel, J., Beck, J., Reinacher, P., Roelz, R.:
Introduction of cisternal lavage leads to avoidance of induced hypertension and reduced cardiovascular complications in patients with subarachnoid hemorrhage.
Journal of Clinical Neuroscience 94, 286-291, (2021)
http://dx.doi.org/10.1016/j.jocn.2021.09.036

Bremer, J., Walderich, P., Pirch, N., Schleifenbaum, J., Gasser, A., Schopphoven, T.:
Effects of path accuracy on additively manufactured specimens by laser material deposition using six-axis robots.
Journal of Laser Applications 33(1), 12045- (8 S.),(2021)
http://dx.doi.org/10.2351/7.0000308 (Open Access)

Brucki, M., Weisser, E., Gasser, A.,  Schopphoven, T., Häfner, C.L.:
Einfluss der Substratoberfläche auf die Oberflächenbeschaffenheit von mittels EHLA erzeugten Beschichtungen.
DVS CONGRESS 2021, 14.-17. Sept. 2021, Düsseldorf. Große Schweißtechnische Tagung und DVS CAMPUS, DVS-BERICHTE, 363-369 (2021)

Brüning, S., Du, K., Gillner, A.:
Großflächige ultraschnelle Mikrobearbeitung mit multiplen Laserspots.
12. Mittweidaer Lasertagung, 10. und 11. November 2021, Mittweidaer. Scientific Reports, Journal of the University of Applied Sciences Mittweida, Nr. 3, 2021, S. 48-55, (2021).
https://doi.org/10.48446/opus-12856 (Open Access)

Bruening, S., Gillner, A., Du, K.:
Multi beam microprocessing for printing and embossing applications with high power ultrashort pulsed lasers.
Advanced Optical Technologies 10(4-5), (2021)
http://dx.doi.org/10.1515/aot-2021-0025

Cao, M., Zhang, D., Gao, Y., Chen, R., Huang, G., Feng, Z., Poprawe, R., Schleifenbaum, J., Ziegler, S.:
The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy.
MATERIALS SCIENCE AND ENGINEERING A 801,140427- (2021)
http://dx.doi.org/10.1016/j.msea.2020.140427

Coenen, V.A., Döbrössy, M.D., Teo, S.J., Wessolleck, J., Sajonz, B.E.A., Reinacher, P.C.,  Thierauf-Emberger, A., Spittau, B., Leupold, J., von Elverfeldt, D., Schlaepfer T.E., Reisert, M.:
Diverging prefrontal cortex fiber connection routes to the subthalamic nucleus and the mesencephalic ventral tegmentum investigated with long range (normative) and short range (ex-vivo high resolution) 7T DTI.
Brain Structure and Function (25 S.) (2021)
https://doi.org/10.1007/s00429-021-02373-x (Open Access)

Chung, W.-S., Nagel, F., Olowinsky, A., Gillner, A.:
Study on the thermal load of the laser impulse metal bonding process to the metallized thermal sensitive substrate.
Welding in the World 65, 463-474 (2021)
https://doi.org/10.1007/s40194-020-01040-9 (Open Access)

Chung, W.-S., Helm, J., Olowinsky, A., Bast, M., Gördes, J.P., Eisele, R., Becker, M., Osterwald, F., Schellenberg, C., Klaus Wilke, K.:
Development of the Laser Beam Based High-Current Contacting Technology and an Integrated Lead Frame Stack Structure.
PCIM Europe digital days 2021, 3 – 7 May 2021, online. In: Mesago Messe Frankfurt GmbH(Hrsg.): PCIM Europe digital days 2021.
International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy, 266-273 (2021)

Chung, W., Wen, L., Olowinsky, A.:
Development of the combined spatial and temporal pulse modulation for the laser impulse metal bonding process.
Journal of Laser Applications 33(1), 012011- (2021)
http://dx.doi.org/10.2351/7.0000297

Chung, W., Jo, G., Olowinsky, A.:
Investigation of the laser-based joining technique for PCBs with locally thickened layers using a cold gas spraying process.
SPIE LASE, 2021, Online Only. Proceedings Vol. 11674, Laser-based Micro- and Nanoprocessing XV; 116740D- (10 S.), (2021)
http://dx.doi.org/10.1117/12.2585101

Coenen, V.A., Döbrössy, M.D., Teo, S.J., Wessolleck, J., Sajonz, B.E.A., Reinacher, P.C.,  Thierauf-Emberger, A., Spittau, B., Leupold, J., von Elverfeldt, D., Schlaepfer T.E., Reisert, M.:
Diverging prefrontal cortex fiber connection routes to the subthalamic nucleus and the mesencephalic ventral tegmentum investigated with long range (normative) and short range (ex-vivo high resolution) 7T DTI.
Brain Structure and Function, (25 S.) (2021)
https://doi.org/10.1007/s00429-021-02373-x (Open Access)

Cupal, J., Spinka, T., Sistrunk, E., Rus, B., Häfner, C.:
Temporal prepulse contrast degradation in high-intensity CPA lasers from anisotropy of amplifier gain media.
APPLIED OPTICS 60, 8408- (11 S.) (2021)
http://dx.doi.org/10.1364/ao.423533

Dahlmanns, J., Völl, A., Wester, R., Stollenwerk, J., Loosen, P., Holly, C.:
Simulation and design of a Fresnelized freeform optic for a head-up display.
SPIE Optical Systems Design, 2021, Online Only. Proc of SPIE Vol. 11874, Illumination Optics VI, 118740Q (2021).
http://dx.doi.org/10.1117/12.2600221

Dahmen, M., Baumgartner, J., Möller, B., Olfert, V., Wagener, R.:
Joining technology and mechanical properties of laser-beam welded joints with martensitic chromium steels.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (11 S.), (2021)

Demerath, T., Donkels, C., Reisert, M., Heers, M., Rau, A., Schröter, N., Schulze-Bonhage, A., Reinacher, P., Scheiwe, C., Shah, M., Beck, J., Vlachos, A., Haas, C., Urbach, H.:
Gray-White Matter Blurring of the Temporal Pole Associated With Hippocampal Sclerosis: A Microstructural Study Involving 3 T MRI and Ultrastructural Histopathology.
Cerebral Cortex, bhab320- (12 S.) (2021)
http://dx.doi.org/10.1093/cercor/bhab320

de Oliveira Lopes, M., Petring, D., Arntz-Schröder, D., Schneider, F., Stoyanov, S., Gillner, A.:
Cutting Whistle – An Original Approach for Nozzle Design in Fiber Laser Cutting of Stainless Steel.
EMPOrIA - International Joint Conference, 19-20 May,  Aachen, Germany. In: Reisgen U., Drummer D., Marschall H. (eds) Enhanced Material, Parts Optimization and Process Intensification. EMPOrIA 2020. Lecture Notes in Mechanical Engineering, 267-276 (2021).
http://dx.doi.org/10.1007/978-3-030-70332-5_24

Dherbecourt, J.B., Raybaut, M., Melkonian, J.M., Hamperl, J., Santagata, R., Dalin, M.,Lebat,  V.,Godard, A., Flamant, C.,Totems, J., Chazette, V., Pasiskevicius, V., Heinecke, D., Schäfer, H., Strotkamp, M.,Geus, J.F. ,Rapp, S., Sodemann, H.,Sodemann, H.:
Design and pre-development of an airborne multi-species differential absorption Lidar system for water vapor and HDO isotope, carbon dioxide, and methane observation.
International Conference on Space Optics — ICSO 2021, 2021, Online Only, Proceedings Volume 11852, International Conference on Space Optics — ICSO 2020; 118521U (2021)
https://doi.org/10.1117/12.2599326 (Open Access)

Doñate-Buendia, C., Kürnsteiner, P., Stern, F., Wilms, M. B., Streubel, R., Kusoglu, I. M., Tenkamp, J., Bruder E., Pirch, N., Barcikowski, S., Durst, K., Schleifenbaum, J. H. , Walther, F., Gault, B., Gökce, B.:
Microstructure formation and mechanical properties of ODS steels built by Laser Additive Manufacturing of nanoparticle coated iron-chromium powders.
ACTA MATERIALIA 206, 116566 (15 S.) (2021)
https://doi.org/10.1016/j.actamat.2020.116566

Dümpelmann, M., Reinacher, P., Kravalis, K., Jagschies, L., Tittelbach, M., Coenen, V., Schulze-Bonhage, A.:
A subgaleal electrode array for neurostimulation allows the recording of relevant information in closed loop applications.
Journal of Neuroscience Methods 362, 109295- (2021)
http://dx.doi.org/10.1016/j.jneumeth.2021.109295

Feng, J., Zhang, P., Jia, Z., Yu, Z., Fang, C., Yan, H., Shi, H., Tian, Y.:
Microstructures and mechanical properties of reduced activation ferritic/martensitic steel fabricated by laser melting deposition.
Fusion Engineering and Design 173, 112865- (2021)
http://dx.doi.org/10.1016/j.fusengdes.2021.112865

Finger, J., Hesker, M.:
High power ultrashort pulse laser processing using a flexible multibeam approach.
Journal of Physics: Photonics 3(2), 021004- (7 S.), (2021)
http://dx.doi.org/10.1088/2515-7647/abf24f (Open Access)

Fischer, F., Birk, N., Rooney, L., Jauer, L., Schleifenbaum, J.:
Optical process monitoring in Laser Powder Bed Fusion using a recoater-based line camera.
Additive Manufacturing 47, 102218- (14 S.)- (2021)
http://dx.doi.org/10.1016/j.addma.2021.102218 (Open Access)

Fuchs, F., Vedder, V., Stollenwerk, J., Loosen, P.:
Determination of the temperature dependent optical properties of amorphous silicon thin films at elevated temperatures.
OPTICS EXPRESS 29(25), 41356-41362 (2021)
https://doi.org/10.1364/OE.437507 (Open Access)

Fu, C., Stollenwerk, J., Holly, C.:
Lens Bending with Reinforcement Learning for Reduced Optical Aberrations.
Frontiers in Optics 2021, Washington, DC United States, 1–4 November 202.
Frontiers in Optics + Laser Science 2021 Technical Digest Series (Optical Society of America, 2021), paper FM3C.7 (2 S.), (2021)
http://dx.doi.org/10.1364/fio.2021.fm3c.7

Garófalo, S., Wehner, M., Dohrn, A., Bilandžić, M., Roos, C., Wierichs, R., Meyer-Lueckel, H., Aranha, A., Esteves-Oliveira, M.:
Increasing dental zirconia micro-retentive aspect through ultra-short pulsed laser microstructuring: study on flexural strength and crystal phase characterization.
Clinical Oral Investigations (17 S.) (2021)
http://dx.doi.org/10.1007/s00784-021-04077-2 (Open Access)

Ghafoori, M., Bahrenberg, L., Glabisch, S., Schröder, S., Danylyuk, S., Brose, S., Stollenwerk, J., Juschkin, L., Loosen, P.:
Broadband scatterometry at extreme ultraviolet wavelengths for nanograting characterization.
SPIE Advanced Lithography 2021, Online Only, California, United States. , Metrology, Inspection, and Process Control for Semiconductor Manufacturing XXXV,
(Proc. SPIE 2021) 11611, (14 S.), (2021)
https://doi.org/10.1117/12.2584738

Grubert, N., König, G., Stollenwerk, J., Loosen, P.:
Ring-Shaped Conoscopic Holography for Distance and Tilt Measurement.
Conference on Lasers and Electro-, 09.05-14.5.2021, online only.
OSA Technical Digest (Optical Society of America, 2021), paper ATh4Q.4 – (2 S.) (2021)
https://doi.org/10.1364/CLEO_AT.2021.ATh4Q.4

Giesen, C., Bochvarov, L., Erben, B., Reichelt, S., Hoefer, M., Müller, L. Reinacher, P.C., Lenenbach, A.:
Laser ablation of bone tissue with Q-switched infrared laser sources for neurosurgical applications.
SPIE BIOS |6-12 March 2021 | Online Only, California, United States.
Proceedings Volume 11627, Photonic Therapeutics and Diagnostics in Dentistry, Head and Neck Surgery, and Otolaryngology; 116270B (2021)
https://doi.org/10.1117/12.2577117

Gu, D., Shi, X., Poprawe, R., Bourell, D.L., Setchi, R., Zhu, J.:
Material-structure-performance integrated laser-metal additive manufacturing.
Science 372(6545), 932- (17 S.), (2021)
https://doi.org/10.1126/science.abg1487

Gurk, H.; Brucki, M.; Mayer, R.:
Frequenz- und Modalanalyse laser-beschichteter  Bremsscheiben.
Berichte aus dem Fahrzeugsystemdesign 2021, Springer, 33-49, (2021)
https://doi.org/10.1007/978-3-658-34821-2_3

Haasler, D., Beckers, C.:
Development of an on-the-fly percussion drilling process based on pulse bursts.
SPIE LASE, 6-12 March 2021, Online Only, California, United States.
Proceedings Vol. 11679, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems X; 116790E (2021)
http://dx.doi.org/10.1117/12.2576896

Haddad, E., Helm, J., Olowinsky, A., Katz, O.:
Comparison Between Copper-Aluminium Laser Joining using Short Pulses and Continuous Wave Mode.
PCIM Europe digital days 2021, 3 – 7 May 2021, online. In: Mesago Messe Frankfurt GmbH(Hrsg.): PCIM Europe digital days 2021.
International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy, 1741-1748 (2021)

Hama-Saleh, R., Yildirim, K., Hemes, S., Weisheit, A., Häfner, C.:
Investigation of High-Depostition-Rate Additive Manufacturing of Ti-6Al-4V via Laser Material Deposition.
ESAFORM 2021, 24th International Conference on Material Forming | 14th and 16th April, 2021 | Online. Paper presented at ESAFORM 2021, Liège, Belgique. (2021)
http://dx.doi.org/10.25518/esaform21.486 (Open Access)

Hamperl, J., Geus, J.F., Mølster, K.M., Zukauskas, A., Dherbecourt, J.-B., Pasiskevicius, V., Nagy, L., Pitz, O., Fehrenbacher, D., Schaefer, H., Heinecke, D., Strotkamp, M., Rapp, S., Denk, P., Graf, N., Dalin, M., Lebat, V., Santagata, R.:
High Energy Parametric Laser Source and Frequency-Comb-Based Wavelength Reference for CO2 and Water Vapor DIAL in the 2 µm Region: Design and Pre-Development Experimentations.
Atmosphere 12(3), 402- (2021)
https://doi.org/10.3390/atmos12030402 (Open Access)

Halm, U., Schulz, W.:
Optimization of Beam Shapes for Laser Fusion Cutting by 3D Simulation of Melt Flow.
EMPOrIA - International Joint Conference, 19-20 May , Aachen Germany. Enhanced Material, Parts Optimization and Process Intensification (Lecture Notes in Mechanical Engineering), 277-285, (2021)
http://dx.doi.org/10.1007/978-3-030-70332-5_25

Halm, U., Nießen, M., Schulz, W.:
Simulation of melt film dynamics in laser fusion cutting using a boundary layer approximation.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 168, 120837- (2021)
http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.120837

Heinigk, C., Barthels, T., Nießen, M., Schulz, W.:
A Multi-Scale Model for Ultra Short Pulsed Parallel Laser Structuring — Part I. the Micro-Scale Model.
Journal of Laser Micro/Nanoengineering 16(2), (6 S.) (2021)
https://doi.org/10.2961/jlmn.2021.02.2011 (Open Access)

Hemes, S., Meiners, F., Sizova, I., Hama-Saleh, R., Röhrens, D., Weisheit, A., Häfner, C.L., Bambach, M.:
Microstructures and Mechanical Properties of Hybrid, Additively Manufactured Ti6Al4V after Thermomechanical Processing.
Materials 14(4), 1039- (13 S.),(2021)
https://doi.org/10.3390/ma14041039 (Open Access)

Hemes, S., Koch, W., Hama-Saleh, R., Sizova, I., Meiners, F., Mathes, M., Bambach, M., Weisheit, A., Schleifenbaum, J.:
Microstructural and Mechanical Analysis of High-Performance Parts Produced by Hybrid Additive Manufacturing of Powder LMD on Forged Base Components.
Advanced Materials Research 1161, 85-93, (2021)
http://dx.doi.org/10.4028/www.scientific.net/amr.1161.85

Helm, J., Meise, A., Olowinsky, A.:
Combined laser beam soldering and welding process for electrical contacting.
SPIE LASE, 2021, Online Only. Proceedings Volume 11674, Laser-based Micro- and Nanoprocessing XV; 116741C (2021).
http://dx.doi.org/10.1117/12.2577578

Herbst, F., Elsen, F., Jungbluth, B., Hoffmann, H.D., Häfner, C.L:
Towards Imaging with Undetected Photons with a nonlinear Mach-Zehnder-type interferometer in MIR.
SPIE Photonics West, LASE, High-Power Diode Laser Technology XIX, 6-12 MARCH 2021, online only.
Proceedings Volume. Proceedings Volume 11670, Nonlinear Frequency Generation and Conversion: Materials and Devices XX; 116701I (2021)
https://doi.org/10.1117/12.2578639

Hesker, M., Fu, C., Heinrichs, M., Stollenwerk, J., Loosen, P.:‘
Precise and fast autofocus measuring device for high-resolution high-speed pupillometry.
CLEO, Conference on Lasers and Electro-Optics Applications and Technology 2021,9–14 May 2021,  San Jose, California US.
OSA Technical Digest (Optica Publishing Group, 2021), paper AW3T.4, (2021)
https://doi.org/10.1364/CLEO_AT.2021.AW3T.4

Hoff, L.C., Scheld, W.S., Vedder, C., Stollenwerk, J., Lobe, S., Uhlenbruck, S.:
Laser sintering of ceramic-based solid-state battery materials.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (7 S.), (2021)

Höffner, J., Froh, J., Mense, T., Mauer, A., Strotkamp, M., Munk, A., Jungbluth, B., Hoffmann, H.-D.:
Ground-based general-purpose Doppler lidar: A technology for Doppler aerosol measurements and beyond.
International Conference on Space Optics - ICSO 2021|Online Only.
Proc. SPIE 11852, International Conference on Space Optics — ICSO 2020, 1185229-, (18 S.) (2021)
https://doi.org/10.1117/12.2599364

Hopmann, C., Knupe-Wolfgang, P., Bölle, S., van der Straeten, K., Timmer, C.:
Entwicklung eines thermischen Simulationsmodells für das Laserdurchstrahlfügen von PA6.6/Edelstahl 1.4301-Verbindungen.
JOINING PLASTICS -FUEGEN VON KUNSTSTOFFEN 15(3), 170-176 (2021)

Huber, H., Walochnik, M., Elsen, F., Jungbluth, B., Loosen, P.:
Efficient difference frequency generation for quantum frequency conversion in a multimode PPLN-waveguide.
SPIE LASE, 2021, Online Only. Proceedings Vol. 11670, Nonlinear Frequency Generation and Conversion: Materials and Devices XX; 116700V (2021)
http://dx.doi.org/10.1117/12.2578605

Hummel, M., Schöler, C., Gillner, A.:
Metallographic Comparison for Laser Welding of Cu-ETP and CuSn6 with Laser Beam Sources of 515 nm and 1030 nm Wavelength.
EMPOrIA - International Joint Conference, 19-20 May, Aachen, Germany. In: Reisgen U., Drummer D., Marschall H. (eds) Enhanced Material, Parts Optimization and Process Intensification. EMPOrIA 2020. Lecture Notes in Mechanical Engineering, 14-28, (2021)
http://dx.doi.org/10.1007/978-3-030-70332-5_2

Hummel, M., Häusler, A., Gillner, A.:
High-Precision Adjustment of Welding Depth during Laser Micro Welding of Copper Using Superpositioned Spatial and Temporal Power Modulation.
Journal of Manufacturing and Materials Processing 5(4), 127- (13 S.), (2021)
http://dx.doi.org/10.3390/jmmp5040127 (Open Access)

Hummel, M., Külkens, M., Schöler, C., Schulz, W., Gillner, A.:
In situ X-ray tomography investigations on laser welding of copper with 515 and 1030 nm laser beam sources.
Journal of Manufacturing Processes 67, (2021)
http://dx.doi.org/10.1016/j.jmapro.2021.04.063

Jia, Z., Zhang, P., yu, z., Wu, D., Tian, Y., Yan, H.:
The evidence of solidification crack propagation in pulsed laser welding of aluminum alloy.
OPTICS EXPRESS 29(12), 18495-18501, (2021)
http://dx.doi.org/10.1364/oe.422369 (Open Access)

Jiang, Q., Zhang, P., Yu, Z., Shi, H., Wu, D., Yan, H., Ye, X., Lu, Q., Tian, Y.:
A Review on Additive Manufacturing of Pure Copper.
Coatings 11(6), 740- (15 S),(2021)
http://dx.doi.org/10.3390/coatings11060740 (Open Access)

Kappert, H., Schopferer, S., Döring, R., Ziesche, S., Olowinsky, A., Naumann, F., Jägle, M., Ostmann, A.:
A7.1 Smart Sensor Systems for Extremely Harsh Environments.
Sensors and Measurement Science International SMSI 2021, 3 - 6 May 2021, Nuremberg Exhibition Center, Germany, 81-82, (2021)
http://dx.doi.org/10.5162/smsi2021/a7.1

Kelbassa, J, Biber, A. Steiner M.F.:
Process development and mechanical properties of Ti-6Al-4V samples generated by laser material deposition with coaxial wire feed.
The 40th annual International Congress on Applications of Lasers & Electro-Optics ICALEO®, Oct.18-21online.
Proceedings of the International Congress of Applications of Lasers & Electro-Optics (ICALEO® 2021), (9 S.), (2021)

Klotz, K., Scheiwe, C., Reinacher, P., Antonio-Arce, V., Schulze-Bonhage, A., Demerath, T., Shah, M.:
Kallosotomien bei Sturzanfällen und epileptischen Spasmen.
Zeitschrift für Epileptologie 34(2), 175-180, (2021)
https://doi.org/10.1007/s10309-021-00398-0 (Open Access)

Knaak, C., Masseling, L., Duong, E., Abels, P., Gillner, A.,
Improving build quality in laser powder bed fusion using high dynamic range imaging and model-based reinforcement learning.
IEEE Access 9, 55214-55231 (2021)
https://doi.org/10.1109/ACCESS.2021.3067302 (Open Access)

Knaak, C., von Eßen, J., Kröger, M.., Schulze, F., Abels, P., Gillner, A.:
A Spatio-Temporal Ensemble Deep Learning Architecture for Real-Time Defect Detection during Laser Welding on Low Power Embedded Computing Boards.
Sensors 21(12), 4205- (28 S.), (2021)
https://doi.org/10.3390/s21124205 (Open Access)

König, G., Fu, C., Stollenwerk, J., Holly, C., Loosen, P.:
Automated lens design for optical systems consisting of stock lenses.
OPTICS EXPRESS 29(24), 39027-39041, (2021)
http://dx.doi.org/10.1364/oe.442176 (Open Access)

Kreuels, K., Bosma, D., Nottrodt, N., Gillner, A.:
Utilizing direct-initiation of thiols for photoinitiator-free stereolithographic 3D printing of mechanically stable scaffolds.
Current Directions in Biomedical Engineering 7(2), 847-850 (2021)
https://doi.org/10.1515/cdbme-2021-2216 (Open Access)

Kreuels, K., Bosma, D., Nottrodt, N., Gillner, A.:
Utilizing direct-initiation of thiols for photoinitiator-free stereolithographic 3D printing of mechanically stable scaffolds. Abstracts,
55th Annual Conference of the German Society for Biomedical Engineering, 05.10.- 07.10.2021, Hannover, Germany.
Abstracts of the 55th Annual Meeting of the German Society for Biomedical Engineering, Biomedical Engineering / Biomedizinische Technik 66(s1), S316- (2021)
https://doi.org/1515/bmt-2021-6049

Kreuels, K., Zhong, Z., Nottrodt, N., Gillner, A., Mela, P.:
P2–ArchiTissue–3D-Architecture of biohybrid cardiovascular implants byadditive manufacturing.
55th Annual Conference of the German Society for Biomedical Engineering, 05.10.- 07.10.2021, Hannover, Germany.
Abstracts of the 55th Annual Meeting of the German Society for Biomedical Engineering, Biomedical Engineering / Biomedizinische Technik 66(s1), S24- (1 Seite), (2021)
https://doi.org/10.1515/bmt-2021-6005

Kumstel, J.:
Laser polishing of metallic freeform surfaces by using a dynamic laser beam preforming system.
Journal of Laser Applications 33(2), 022020- (5 S.), (2021)
https://doi.org/10.2351/1.5128459 (Open Access)

Lange, T., Völl, A., Berens, M., Stollenwerk, J., Loosen, P., Holly, C.:
Rigorous approach for unifying wave optics and state of the art rendering techniques.
OPTICS EXPRESS 29(18), 29044-29055 (2021)
http://dx.doi.org/10.1364/oe.433181 (Open Access)

Lantzsch, T., Westphalen, T., Tenbrock, C., Traub, M., Haefner, C. L.:
Laser Powder Bed Fusion of Stainless Steel 316L Using a Flexible Dual Fiber Laser Array.
Solid Freeform Fabrication 2021, August 2-4, 2021, Virtual. Proceedings of the 32nd Annual International. Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 1608-1617 (2021)
http://dx.doi.org/10.26153/tsw/17671 (Open Access)

Lantzsch, T., Traub, M., Westphalen, T., Tenbrock, C., Schleifenbaum, J. H.:
Laser powder bed fusion of stainless steel 316L using a combination of high-power diode laser and galvanometer scanner.
SPIE LASE | 6-12 MARCH 2021 | Online Only. Laser 3D Manufacturing VIII (Proc. of SPIE), 116770M (8 S.), (2021)
https://doi.org/10.1117/12.2573128

Lantzsch, T., Schauerte, M., Traub, M., Westphalen, T., Tenbrock, C., Schleifenbaum, J.H.:
Exploring the potential of diode lasers for additive manufacturing.
Laser Systems Europe 50 (2021)

Lindemann, M.C., Luttke, T, Nottrodt, N., Schmitz-Rode, T., Slabu, I.:
FEM based Simulation of Magnetic Drug Targeting in a Multibranched Vessel Model.
Computer Methods and Programs in Biomedicine 210, 106354 - (11 S.) (2021)
https://doi.org/10.1016/j.cmpb.2021.106354

Livrozet, M., Gronloh, B., Faidel, H., Luttmann, J., Hoffmann, D.:
Optical and Optomechanical Design of the MERLIN Laser Optical Bench.
International Conference on Space Optics (Proc. Of SPIE) 11852; 118522Q- (14 S.), (2021)
https://doi.org/10.1117/12.2599445

Lüttgenau, B., Brose, S., Danylyuk, S., Stollenwerk, J., Loosen, P., Holly, C.:
Design and realization of an in-lab EUV dual beamline for industrial and scientific applications.
SPIE PHOTOMASK TECHNOLOGY + EUV LITHOGRAPHY | 27 SEPTEMBER - 8 OCTOBER 2021.
Proceedings Vol.11854, International Conference on Extreme Ultraviolet Lithography 2021; 1185419 (2021)
https://doi.org/10.1117/12.2600935

Ma, T., Mariscal, D., Anirudh, R., Bremer, T., Djordjevic, B., Galvin, T., Grace, E., Herriot, S., Jacobs, S., Kailkhura, B., Hollinger, R., Kim, J., Liu, S., Ludwig, J., Neely, D., Rocca, J., Scott, G., Simpson, R., Spears, B., Spinka, T., Swanson, K., Thiagarajan, J., Van Essen, B., Wang, S., Wilks, S., Williams, G., Zhang, J., Herrmann, M., Haefner, C.:
Accelerating the rate of discovery: toward high-repetition-rate HED science.
Plasma Physics and Controlled Fusion 63(10), 104003-(10 S.) (2021)
http://dx.doi.org/10.1088/1361-6587/ac1f67 (Open Access)

Meinhardt, C., Noll, R., Fricke-Begemann, C.:
Crosstalk effects of the surface layers of metallic samples on laser-induced breakdown spectroscopy measurements.
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY 36(4), 796-802 (2021)
http://dx.doi.org/10.1039/d0ja00445f (Open Access)

Meyer, A., Zuric, M,:
Multi-Beam Processing with Individually Addressable Beamlets: Calibration & Data Processing.
Journal of Laser Micro/Nanoengineering 16(2), (9 S.) (2021)
https://doi.org/10.2961/jlmn.2021.02.2005 (Open Access)

Neidert, N., Straehle, J., Erny, D., Sacalean, V., El Rahal, A., Steybe, D., Schmelzeisen, R., Vlachos, A., Reinacher, P., Coenen, V., Mizaikoff, B., Heiland, D., Prinz, M., Beck, J., Schnell, O.:
Stimulated Raman histology in the neurosurgical workflow of a major European neurosurgical center — part A.
Neurosurgical Review, (2021)
http://dx.doi.org/10.1007/s10143-021-01712-0 (Open Access)

Nguyen, N.-P., Nayak, C., Brosda, M., Olowinsky, A., Leitte, H., Gillner, A.:
Process monitoring in laser transmission welding of plastics by using deep learning algorithms.
LPM2021 -the 22nd International Symposium on Laser Precision Microfabrication, June 8-11, 2021, Web Conference.
The Proceedings of LPM2021, #21-038- (7 S.), (2021)

Nguyen, N.-P., Nayak, C., Brosda, M.,  Olowinsky, A., Leitte, H., Gillner, A.:
Process Monitoring in Absorber-Free Laser Transmission Welding of Plastics by Using Deep Learning Algorithms.
Journal of Laser Micro/Nanoengineering 16(3), (7 S.) (2021)
https://doi.org/10.2961/jlmn.2021.03.2003

Noll, R., Fricke-Begemann, C., Schreckenberg, F.:
Laser-induced breakdown spectroscopy as enabling key methodology for inverse production of end-of-life electronics.
Spectrochimica Acta Part B: Atomic Spectroscopy 181, 106213- (2021)
https://doi.org/10.1016/j.sab.2021.106213 (Open Access)

Osbild, M., Gerhorst, E., Sivankutty, S., Pallier, G., Labroille, G.:
Submicrometer surface structuring with a Bessel beam generated by a reflective axicon.
Journal of Laser Applications 33(4), 042013, (7 S.) (2021)
http://dx.doi.org/10.2351/7.0000532 (Open Access)

Pauzon, C., Hoppe, B., Pichler, T., Dubiez-Le Goff, S., Forêt, P., Nguyen, T., Hryha, E.:
Reduction of incandescent spatter with helium addition to the process gas during laser powder bed fusion of Ti-6Al-4V.
CIRP Journal of Manufacturing Science and Technology 35, 371-378 (2021)
http://dx.doi.org/10.1016/j.cirpj.2021.07.004

Pereira, J., Moreno, R., Tenbrock, C., Herget, A., Wittich, T., Hamilton, K.:
Advances in Multi-Process Hybrid Production Cells for Rapid Individualised Laser-Based Production.
Applied Sciences 11(4), 1812- (2021)
http://dx.doi.org/10.3390/app11041812 (Open Access)

Pongratz, L., Vannahme, K.
Automated spatial period variation for direct laser interference patterning.
SPIE LASE, 2021, Online Only., Laser-based Micro- and Nanoprocessing XV; (Proc. of SPIE 11674),116740P-, (2021) 11674
https://doi.org/10.1117/12.2579507

Pongratz, L., Vannahme, K.:
Beam shaping the Direct Laser Interference Patterning spot.
The 22nd International Symposium on Laser Precision Microfabrication, June 8-11, 2021 (Web Conference). Proceedings of LPM2021, #21-021- (7 S.), (2021)

Prochnau, M., Grubert, N., Andres, S., Holters, M., Stollenwerk, J., Loosen, P.:
Miniaturized optical measuring probe for the detection of drop sizes in steam turbines.
CLEO, Conference on Lasers and Electro-Optics Applications and Technology 2021,9–14 May 2021, San Jose, California US.
OSA Technical Digest (Optica Publishing Group, 2021), paper JTh3A.86, (2021).
https://doi.org/10.1364/CLEO_AT.2021.JTh3A.86

Rau, A., Roelz, R., Urbach, H., Coenen, V. A., Demerath, T., Reinacher, P. C.:
Application of Augmented Reality in Percutaneous Procedures-Rhizotomy of the Gasserian Ganglion.
Operative Neurosurgery 21(3), 160-164 (2021)
https://doi.org/10.1093/ons/opab155 (Open Access)

Rittinghaus, S.-K., Zielinski, J.:
Influence of process conditions on the local solidification and microstructure during Laser Metal Deposition of an intermetallic TiAl alloy (GE4822).
Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 52, 1106–1116 (2021)
https://doi.org/10.1007/s11661-021-06139-2 (Open Access)

Roelz , R., Scheiwe, C.,  Grauvogel, J.,  Csok, I., Coenen, V. A., Beck, J.,  Reinacher, P.C.:
Early cisternal fibrinolysis is more effective than rescue spasmolysis for the prevention of delayed infarction after subarachnoid haemorrhage.
Stroke and Vascular Neurology 0 -(6 S.), (2021)

Roelz , R., Schubach , F., Coenen, V.A., Jenkner, C., Scheiwe, C., Grauvogel, J., Niesen, W.-D., Urbach, H., Taschner, C.,  Seufert, J.,  Kätzler, J., Beck, J.,  Reinacher , P. C:
Stereotactic cisternal lavage in patients with aneurysmal subarachnoid hemorrhage with urokinase and nimodipine for the prevention of secondary brain injury (SPLASH): study protocol for a randomized controlled trial.
Trials 22(1), 285- (15 S.), (2021)
https://doi.org/10.1186/s13063-021-05208-6 (Open Access)

Roelz, R., Grauvogel, J., Csok, I., Schäfer, J.-H., Shah, M., Fung, C., Taschner, C., Beck, J., Reinacher, P. C., Scheiwe, C.:
Patterns of intracerebral hemorrhage that result in unfavorable outcomes in patients with subarachnoid hemorrhage.
Clinical Neurology and Neurosurgery 205, 106603- (2021)
https://doi.org/10.1016/j.clineuro.2021.106603

Rödler, G.; Fischer, F.G.; Preußner, J.; Friedmann, V.; Fischer, C.; Weisheit, A.; Schleifenbaum, J.H.:
Additive Manufacturing of high-strength eutectic Aluminium-Nickel alloys – Processing and Mechanical Properties.
Journal of Materials Processing Technology 298, 117315- (11 S.) (2021)
https://doi.org/10.1016/j.jmatprotec.2021.117315 (Open Access)

Saewe, J., Carstensen, N., Kürnsteiner, P., Jägle, E. A., Schleifenbaum, J. H.:
Influence of increased carbon content on the processability of high-speed steel HS6-5-3-8 by laser powder bed fusion.
Additive Manufacturing 46, 102125- (2021)
https://doi.org/10.1016/j.addma.2021.102125

Saßmannshausen, A., Brenner, A., Finger, J.:
Ultrashort pulse laser polishing by continuous surface melting.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 293, (11 S.),(2021)
https://doi.org/10.1016/j.jmatprotec.2021.117058 (Open Access)

Schaible, J., Hau, L., Weber, D., Schopphoven, T., Häfner, C., Schleifenbaum, J.H:
Particle velocity measurement in powder gas jets of coaxial powder nozzles for laser material deposition.
Journal of Laser Applications 33 (1), 12019- (2021)
http://dx.doi.org/10.2351/7.0000296

Schaible, J., Sayk, L., Schopphoven, T., Schleifenbaum, J., Häfner, C.:
Development of a high-speed laser material deposition process for additive manufacturing.
Journal of Laser Applications 33(1), 012021- (10 S.) (2021)
http://dx.doi.org/10.2351/7.0000320

Schöler, C., Nießen, M., Schulz, W.:
Numerical Investigation of Keyhole Depth Formation in Micro Welding of Copper with 1030 nm and 515 nm Laser Radiation.
EMPOrIA - International Joint Conference, 19-20 May, Aachen, Germany. In: Reisgen U., Drummer D., Marschall H. (eds) Enhanced Material, Parts Optimization and Process Intensification. EMPOrIA 2020. Lecture Notes in Mechanical Engineering, 29-39, (2021)
http://dx.doi.org/10.1007/978-3-030-70332-5_3

Schmelzer, J., Rittinghaus, S.-K., Wilms, M. B., Michael, O., Krüger, M.:
Particle strengthening of additively manufactured Me-Si-B (Me = Mo, V) alloys.
Intermetallics Conference 2021, 04.10. - 08.10.2021, Bad Staffelstein, Germany. Proceedings Intermetallics 2021;
Eds. M. Heilmaier, M. Krüger, S. Mayer, M. Palm, F. Stein; Conventus Congressmanagement & Marketing GmbH, Jena, Germany (2021), 59-60 (2021)

Schmelzer, J., Rittinghaus, S., Wilms, M., Michael, O., Krüger, M.:
Strengthening of additively manufactured Me-Si-B (Me = Mo, V) by Y2O3 particles.
INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS 101, 105623- (2021)
https://doi.org/10.1016/j.ijrmhm.2021.105623

Schopphoven, T.:
EHLA-Tuning – Walzenbeschichtung bis zu 200 Meter pro Minute.
Journal für Oberflächentechnik 61(7), 10-11, (2021)

Schröder, S., Bahrenberg, L., Lüttgenau, B., Glabisch, S., Brose, S., Danylyuk, S., Stollenwerk, J., Loosen, P.:
Latent image characterization by spectroscopic reflectometry in the
extreme ultraviolet.
SPIE Advanced Lithography, 2021, Online Only. Proceedings Volume 11611, Metrology, Inspection, and Process Control for Semiconductor Manufacturing XXXV; 116111M- (14 S.), (2021)
https://doi.org/10.1117/12.2583830

Simpson, R., Mariscal, D., Kim, J., Scott, G., Williams, G., Grace, E., McGuffey, C., Wilks, S., Kemp, A., Lemos, N., Djordjevic, B., Folsom, E., Kalantar, D., Zacharias, R., Pollock, B., Moody, J., Beg, F., Morace, A., Iwata, N., Sentoku, Y., Manuel, M., Mauldin, M., Quinn, M., Youngblood, K., Gatu-Johnson, M., Lahmann, B., Haefner, C., Neely, D., Ma, T.:
Demonstration of TNSA proton radiography on the National Ignition Facility Advanced Radiographic Capability (NIF-ARC) laser.
Plasma Physics and Controlled Fusion 63(13), 124006- (9 S.), (2021)
http://dx.doi.org/10.1088/1361-6587/ac2349 (Open Access)

Spurek, M., Haferkamp, L., Weiss, C., Spierings, A., Schleifenbaum, J., Wegener, K.:
Influence of the particle size distribution of monomodal 316L powder on its flowability and processability in powder bed fusion.
Progress in Additive Manufacturing , (10 S.), (2021)
http://dx.doi.org/10.1007/s40964-021-00240-z (Open Access)

Steiert, C., Grauvogel, J., Roelz, R., Demerath, T., Schnell, D., Beck, J., Coenen, V. A., Reinacher, P.C.:
Stereotactic cysto-ventricular catheters in craniopharyngiomas: an effective minimally invasive method to improve visual impairment and achieve long-term cyst volume reduction.
Neurosurgical Review 44, 3411-3420 (2021)
https://doi.org/10.1007/s10143-021-01510-8 (Open Access)

Steiner, M.F., Speier, M., Kelbassa, J., Schopphoven, T., Häfner, C.L.:
Influence of tool path planning on process stability and deposition accuracy in laser material deposition with coaxial wire feed.
The 40th annual International Congress on Applications of Lasers & Electro-Optics ICALEO®, Oct. 18-21 2021, online.
Proceedings of the International Congress of Applications of Lasers & Electro-Optics (ICALEO® 2021), # , (9 S.), (2021)  (2022)

Straehle, J., Erny, D., Neidert, N., Heiland, D., El Rahal, A., Sacalean, V., Steybe, D., Schmelzeisen, R., Vlachos, A., Mizaikoff, B., Reinacher, P., Coenen, V., Prinz, M., Beck, J., Schnell, O.:
Neuropathological interpretation of stimulated Raman histology images of brain and spine tumors: part B.
Neurosurgical Review (9 S.), (2021)
http://dx.doi.org/10.1007/s10143-021-01711-1 (Open Access)

Sui, S., Li, Z., Zhong, C., Zhang, Q., Gasser, A., Chen, J., Chew, Y., Bi, G.:
Laves phase tuning for enhancing high temperature mechanical property improvement in laser directed energy deposited Inconel 718.
Composites Part B: Engineering 215, 108819- (2021)
http://dx.doi.org/10.1016/j.compositesb.2021.108819

Teichmann, E., Kelbassa, J., Gasser, A., Tarner, S., Schleifenbaum, J.:
Effect of wire feeder force control on laser metal deposition process using coaxial laser head.
Journal of Laser Applications 33(1), 012041- (2021)
http://dx.doi.org/10.2351/7.0000304

Temmler, A., Braun, K., Uluz, E.:
Heat accumulation and surface roughness evolution in CO2 nanosecond laser ablation of quartz glass.
OPTICS AND LASER TECHNOLOGY 144, 107426- (2021)
http://dx.doi.org/10.1016/j.optlastec.2021.107426

Temmler, A., Cortina, M., Ross, I., Küpper, M., Rittinghaus, S.:
Laser Micro Polishing of Tool Steel 1.2379 (AISI D2): Influence of Intensity Distribution, Laser Beam Size, and Fluence on Surface Roughness and Area Rate.
Metals 11(9), 1445- (24 S.), (2021)
http://dx.doi.org/10.3390/met11091445 (Open Access)

Tenbrock, C,, Keliger, T., Prätzsch, N, Ronge, M., Jauer, L., Schleifenbaum, J. H.:
Effect of laser-plume interaction on part quality in multi-scanner Laser Powder Bed Fusion.
Additive Manufacturing 38, 101810, (2020)
https://doi.org/10.1016/j.addma.2020.101810

Thombansen, U., Abels, P., Fiedler, W., Knaak, C., Kröger, M., Lanfermann, A., Schulze, F.:
Datennutzung und Datenreduktion in der Lasermaterialbearbeitung
In: Trauth, D., Bergs, T., Prinz, W.: Monetarisierung von technischen Daten. Innovationen aus Industrie und Forschung, Springer, 575-592, (2021).
http://dx.doi.org/10.1007/978-3-662-62915-4_29

Thoß, A., Bergmann, K.:
Deshalb ist extremes UV-Licht (EUV) ein zukunftssicherndes Werkzeug.
MaschinenMarkt, 47739242, (3 S.), (2021)

Tortorici, M., Gayer, C., Torchio, A., Cho, S., Schleifenbaum, J., Petersen, A.:
Inner strut morphology is the key parameter in producing highly porous and mechanically stable poly(ε-caprolactone) scaffolds via selective laser sintering.
Materials Science and Engineering: C 123, 111986-(2021)
http://dx.doi.org/10.1016/j.msec.2021.111986

Wagner, J., Hagenlocher, C., Hummel, M., Olowinsky, A., Weber, R., Graf, T.:
Synchrotron X-ray Analysis of the Influence of the Magnesium Content on the Absorptance during Full-Penetration Laser Welding of Aluminum.
Metals 11(5), 797- (13 S.), (2021)
http://dx.doi.org/10.3390/met11050797 (Open Access)

Wang, J., Zhang, P., Shen, L., Yu, Z., Shi, H., Tian, Y.:
The femtosecond laser induced Zr64.13Cu15.75Ni10.12Al10 amorphous periodic surface structure.
Journal of Manufacturing Processes 69, 613-620 (2021)
http://dx.doi.org/10.1016/j.jmapro.2021.08.020

Wei, X., Zhang, P., Yu, Z., Yan, H., Wu, D., Shi, H., Chen, J., Lu, Q., Tian, Y., Ma, S., Lei, W.:
Effect of phase transformation on mechanical properties of Al16.80Co20.74Cr20.49Fe21.28Ni20.70 high entropy alloy coatings processed by laser cladding.
Journal of Alloys and Compounds 862, 158563- (2021)
http://dx.doi.org/10.1016/j.jallcom.2020.158563

Weisheit, A., Dutta, A., Rittinghaus, S., Majumdar, J.:
Structure-property-process parameters correlation of laser additive manufactured TiC dispersed titanium aluminide (Ti45Al5Nb0.5Si) composite.
Intermetallics 134,107185- (2021)
http://dx.doi.org/10.1016/j.intermet.2021.107185

Weiss, C., Munk, J., Haefner, C. L.:
Investigation Towards AlSi10Mg Powder Recycling Behavior in the LPBF Process and Its Influences on Mechanical Properties.
Solid Freeform Fabrication 2021, August 2-4, 2021, Virtual.
Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 817-830 (2021)

Wen, X., Wu, D., Zhang, P., Liu, S., Luo, Z., Jia, Z., Ye, X., Shi, H., Yu, Z.:
Influence mechanism of the keyhole behavior on penetration depth by in-situ monitoring in pulsed laser welding of aluminum alloy.
Optik 246, 167812-, (2021)
http://dx.doi.org/10.1016/j.ijleo.2021.167812

Williams, W., Crane, J., Alessi, D., Boley, C., Bowers, M., Conder, A., Di Nicola, J., Di Nicola, P., Haefner, C., Halpin, J., Hamamoto, M., Heebner, J., Hermann, M., Herriot, S., Homoelle, D., Kalantar, D., Lanier, T., LaFortune, K., Lawson, J., Lowe-Webb, R., Morrissey, F., Nguyen, H., Orth, C., Pelz, L., Prantil, M., Rushford, M., Sacks, R., Salmon, J., Seppala, L., Shaw, M., Sigurdsson, R., Wegner, P., Widmayer, C., Yang, S., Zobrist, T.:
Spatio-temporal focal spot characterization and modeling of the NIF ARC kilojoule picosecond laser.
APPLIED OPTICS 60(8), 2288-2303 (2021)
http://dx.doi.org/10.1364/ao.416846

Wu, C., Zafar, M., Zhao, H., Wang, Y., Schöler, C., Heinigk, C., Nießen, M., Schulz, W.:
Multi-physics modeling of side roughness generation mechanisms in powder bed fusion.
Additive Manufacturing 47, 102274- (2021)
http://dx.doi.org/10.1016/j.addma.2021.102274

Xiong, W., Zhang, P., Yu, Z., Yan, H., Wu, D., Lu, Q., Tian, Y.:
Weld zone porosity elimination process of galvanized steel zero-gap lap joints in remote laser spiral welding.
Materials Research Express 8(6), 066502- (17 S.), (2021)
http://dx.doi.org/10.1088/2053-1591/ac04ee (Open Access)

Zhang, P, Jia, Z., Yu, Z., Shi, H., Li, S., Wu, D., Yan, H., Ye, X., Chen, J., Wang, F., Tian, Y.:
A review on the effect of laser pulse shaping on the microstructure and hot cracking behavior in the welding of alloys.
OPTICS AND LASER TECHNOLOGY 140, 107094- (2021)
https://doi.org/10.1016/j.optlastec.2021.107094

Zhang, P., Jia, Z., Yan, H., Yu, Z., Wu, D., Shi, H., Wang, F., Tian, Y., Ma, S., Lei, W.:
Effect of deposition rate on microstructure and mechanical properties of wire arc additive manufacturing of Ti-6Al-4V components.
Journal of Central South University 28, 1100-1110, (2021)
http://dx.doi.org/10.1007/s11771-021-4683-0

Zhang, P., Zhang, Q., Yan, H., Yu, Z., Yang, J., Chen, J., Wu, D., Shi, H., Tian, Y., Ma, S., Lei, W.:
Fabrication, microstructure and micromechanical properties of Fe-based metallic glass coating manufactured by laser.
SURFACE & COATINGS TECHNOLOGY 405,126726- (2021)
http://dx.doi.org/10.1016/j.surfcoat.2020.126726

Zhang, P, Tan J., Tian, Y., Yan, H., Yu, Z.:
Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, (41 S.), (2021)
https://doi.org/10.1007/s00170-021-07990-8 (Open Access)

Zhao, T., Xu, T., Wang, Y., Bakir, M., Cai, W., Wang, M., Dahmen, M., Zheng, Q., Wei, X., Hong, C., Zhong, C., Albus, P., Schopphovena, T., Gasser, A., Häfner, C.L.:
Some Factors Affecting Porosity in Directed Energy Deposition of AlMgScZr-Alloys.
OPTICS AND LASER TECHNOLOGY 143, 107337 (16 S.), (2021)
https://doi.org/10.1016/j.optlastec.2021.107337 (Open Access)

Zhong, C., Liu, J., Backes, G., Zhao, T., Schopphoven, T., Gasser, A.:
3D printing of large-scale components of titanium alloys under open atmosphere.
Materials Today Communications 28, 102688-(2021)
http://dx.doi.org/10.1016/j.mtcomm.2021.102688