Fachaufsätze

Arntz-Schroeder, D., Petring, D.:
Analyzing the Dynamics of the Laser Beam Cutting Process - An explanation of characteristic frequencies of melt film dynamics.
PhotonicsView 17(2), 43-47 (2020)
https://doi.org/10.1002/phvs.202000015 (Open Access)

Baer, P., Giesberts, M., Fitzau, O.:
Investigations on single-mode fibers with rectangular core geometry.
OSA Continuum 3(8), 2243-2252, (2020)
http://dx.doi.org/10.1364/osac.396103 (Open Access)

Bahrenberg, L., Danylyuk, S., Glabisch, S., Ghafoori, M., Schröder, S., Brose, S., Stollenwerk, J., Loosen, P.:
Characterization of nanoscale gratings by spectroscopic reflectometry in the extreme ultraviolet with a stand-alone setup.
OPTICS EXPRESS 28, 20489-20502 (2020)
https://doi.org/10.1364/OE.396001 (Open Access)

Bahrenberg, L., Glabisch, S., Danylyuk, S., Ghafoori, M., Schröder, S., Brose, S., Stollenwerk, J., Loosen, P:
Nanoscale grating characterization through EUV spectroscopy aided by machine learning techniques.
SPIE Advanced Lithography, 23-27 February 2020, San Jose, California, United States. Metrology, Inspection, and Process Control for Microlithography XXXIV (Proc. of SPIE), 11325, 113250X  (8 S.), (2020)
https://doi.org/10.1117/12.2550508

Barthels, T., Niessen, M., Reininghaus, M., Wang, Y.:
High-precision ultrashort pulsed laser processing of metal foils using an advanced multibeam optic.
SPIE LASE, 2020, San Francisco, California, United States. Proceedings Volume 11267, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXV; 112670P (2020)
https://doi.org/10.1117/12.2551994

Birkelbach, M.A., Smeets, R., Fiedler, I., Kluwe, L., Wehner, M., Trebst, T.,  Hartjen, P.:
In Vitro Feasibility Analysis of a New Sutureless Wound-Closure System Based on a Temperature-Regulated Laser and a Transparent Collagen Membrane for Laser Tissue Soldering (LTS).
International Journal of Molecular Sciences 21(19), 7104, (13 S.), (2020)
https://doi.org/10.3390/ijms21197104 (Open Access)

Bobzin, K., Wietheger, W., Knoch, A., Sommer, J., Brucki, M., Schopphoven, T., Schleifenbaum, J.H., Häfner, C.:
Combination of a laser deposition welded corrosion protection coating and a thermally sprayed wear protection coating.
Thermal Spray Bulletin 72(2), 114-121 (2020)

Bobzin, K., Wietheger, W., Knoch, M. A., Sommer, J., Brucki, M., Schopphoven, T., Schleifenbaum, J.H., Häfner, C.L.:
Entwicklung eines laserauftragsgeschweißten und thermisch gespritzten Schichtverbundes.
DVS-BERICHTE 365, 586-592, (2020)

Bold, M., Zielinski, J., Ziegler, S., Schleifenbaum, J. H.:
Study of Laser Metal Deposition of IN718 on Inclined Planes: Influence of Inclination on Height and Width of Deposited Material.
MAMC- Metal Additive Manufacturing Conference 2019, Orebro, Sweden. Proceedings of the Metal Additive Manufacturing Conference, 137-145, (2020)

Bold, M., Linnenbrink, S., Pirch, N., Gasser, A., Mund, J., Schleifenbaum, J.:
Powder based laser material deposition on edges.
Journal of Laser Applications 32(3), 32001- (2020)
http://dx.doi.org/10.2351/7.0000095

Bornschlegel, B., Köller, J., Finger, J.:
In-situ analysis of heat accumulation during ultrashort pulsed laser ablation.
Journal of Laser Micro/Nanoengineering 15(1), 56-62 (2020)
https://doi.org/10.2961/jlmn.2020.01.2010

Braun, K., Willenborg, E., Schleifenbaum, J.H.:
Laser polishing as a new post process for 3D-printed polymer parts.
11th CIRP Conference on Photonic Technologies [LANE2020], 2020 Sept,7-10.
Procedia Cirp 94, 134-138 (2019).
https://doi.org/10.1016/j.procir.2020.09.026 (Open Access)

Bremer, J.,  Linden, S., Fleischhauer, T.,  Gasser, A., Schleifenbaum, J.H.:
Adaptive Manufacturing with Laser Material Deposition Using Intermittent Machine.
The Composites and Advanced materials Expo CAMX 2020 | Virtual Experience | Sept 21-24. SAMPE/CAMX Conference Proceedings, (16 S.), (2020)

Bremer, J.,  Fleischhauer, T.,  Gasser, A., Schleifenbaum, J.H.:
Development of intermittent layer height control using line scanning for successive toolpath adaption in laser material deposition.
The Composites and Advanced materials Expo CAMX 2020 | Virtual Experience | Sept 21-24. SAMPE/CAMX Conference Proceedings, TP 232 (16 S.), (2020)

Brenner, A., Röther, L., Osbild, M., Finger, J.:
Laser polishing using ultrashort pulse laser.
SPIE LASE, 2020, 1-6 February 2020, San Francisco, California, United States.
Proceedings Volume 11268, Laser-based Micro- and Nanoprocessing XIV; 112680P (2020)
http://dx.doi.org/10.1117/12.2551481

Brosda, M., Nguyen, P., Olowinsky, A., Gillner, A.:
Investigations on the influence of beam shaping in laser transmission welding of multi-layer polymer films with wavelength-adapted diode laser beam sources.
In: da Silva, Lucas F. M., Martins, Paulo A. F., El-Zein, Mohamad S. [Ed.]: Advanced Joining Processes, (Advanced Joining Processes, 125), Springer 91-100, (2020)
https://doi.org/10.1007/978-981-15-2957-3_7

Brucki, M., Schopphoven, T., Schleifenbaum, J.H., Häfner, C.L., Bobzin, K., Wietheger, W.,  Knoch, M. A., Sommer, J.:
Entwicklung eines laserauftragsgeschweißten und thermisch gespritzten Schichtverbundes.
DVS CONGRESS. Große Schweißtechnische Tagung DVS CAMPUS. Vorträge der Online-Veranstaltungen vom 14. bis 18. September 2020.
DVS Berichte, DVS, Düsseldorf, 178-182 (2020)

Brueckner, F., Bremen, S., Mueller, B.:
Fraunhofer DDMC 2020 special issue of the progress in additive manufacturing journal.
Progress in Additive Manufacturing 5, 1-2 (2020)
http://dx.doi.org/10.1007/s40964-020-00125-7 (Open Access)

Bruening, S., Du, K, Jarczynski, M., Gillner, A.:
High-throughput micromachining with ultrashort pulsed lasers and multiple spots.
Journal of Laser Applications 32(1), 012003- (9S.), (2020)
https://doi.org/10.2351/1.5122853

Bruening, S., Du, K., Gillner, A.:
Micro processing with ultrafast bursts of pulses.
11th CIRP Conference on Photonic Technologies [LANE 2020] on September 7-10, 2020.
Procedia CIRP 94, 856-862, (2020).
http://dx.doi.org/10.1016/j.procir.2020.09.110 (Open Access)

Cebeci, P., Vera Mosquera, J., Höfer, M., Fitzau, O., Giesberts, M., Erben, B., Hoffmann, H.:
Highly stable, high power hybrid fiber and Innoslab amplifier for narrow linewidth signals.
SPIE LASE, 1-6 February 2020, San Francisco, California, United States.
Proceedings Volume 11259, Solid State Lasers XXIX: Technology and Devices; 112590L (2020)
http://dx.doi.org/10.1117/12.2545934

Chung, W., Reska, J., Olowinsky, A., Gillner, A.:
Investigation of the melt dynamics during the laser impulse metal bonding process with keyhole measurement.
11th CIRP Conference on Photonic Technologies [LANE 2020] on September 7-10, 2020.
Procedia CIRP 94, 936-941, (2020).
http://dx.doi.org/10.1016/j.procir.2020.09.142 (Open Access)

Dahmen, M., Deniz, B., Petring, D.:
Revisiting transport phenomena and their role in intermixing during dissimilar laser beam welding
11th CIRP Conference on Photonic Technologies [LANE 2020] on September 7-10 2020, virtuell. Procedia CIRP 94, 726-730, (2020)
https://doi.org/10.1016/j.procir.2020.09.132 (Open Access)

Deuter, V., Grochowicz, M., Brose, S., Biller, J., Danylyuk, S., Taubner, T., Siemion, A., Grützmacher, D., Juschkin, L.:
Computational proximity lithography with extreme ultraviolet radiation.
OPTICS EXPRESS 28(18), 27000-27012 (2020)
https://doi.org/10.1364/OE.398805 (Open Access)

Doñate-Buendia, C., Streubel, R., Kürnsteiner, P., Wilms, M., Stern, F., Tenkamp, J., Bruder, E., Barcikowski, S., Gault, B., Durst, K., Schleifenbaum, J., Walther, F., Gökce, B.:
Effect of nanoparticle additivation on the microstructure and microhardness of oxide dispersion strengthened steels produced by laser powder bed fusion and directed energy deposition.
Procedia CIRP 94, 41-45, (2020)
http://dx.doi.org/10.1016/j.procir.2020.09.009 (Open Access)

Esteves-Oliveira, M., Wierichs, R.J., Haak, R., Wehner, M.:
Laser in der minimalinvasiven Kariestherapie – Stand der Technik.
QUINTESSENZ ZAHNMEDIZIN 71(3), (9 S.), (2020)

Esteves-Oliveira, M., Wierichs, R:J., Haak, R., Wehner, M.:
Láser en el tratamiento mínimamente invasivo de caries – nivel actual de la técnica.
QUINTESSENZ ZAHNMEDIZIN 8(7), 504-511 (2020)

Finger, J.-T., Brenner, A., Pongratz, L., Gillner, A.:
Mikrostrukturierung mit innovativen Laserverfahren/Microstructuring Using Innovative Laser Processes.
WT Werkstattstechnik online 110(6), 450-455 (2020)
https://doi.org/10.37544/1436-4980-2020-06-90

Fischer, T., Kuhn, B., Rieck, D., Schulz, A., Trieglaff, R., Wilms, M. B.:
Fatigue cracking of additively manufactured materials – Process and material perspectives.
Applied Sciences 10(6), 5556 (26 S.), (2020)
https://doi.org/10.3390/app10165556 (Open Access)

Grubert, N., König, G., Stollenwerk, J., Loosen, P.:
Methodik zur kostenbasierten Toleranzbudgetfestlegung optomechanischer Systeme.
121. Jahrestagung der Deutschen Gesellschaft für angewandte Optik e. V.(DGaO), 02. - 06. Juni 2020. BremenDGaO-Proceedings, A22, (2 S.), (2020)

Gu, D., Chen, H., Dai, D., Ma, C., Zhang, H., Lin, K., Xi, L., Zhao, T., Hong, C., Gasser, A., Poprawe, R.:
Carbon Nanotubes Enabled Laser 3D Printing of High-Performance Titanium with Highly Concentrated Reinforcement.
iScience 23(9),101498- (2020)
https://doi.org/10.1016/j.isci. 2020.101498 (Open Access)

Haddad, E., Helm, J., Olowinsky, A., Gillner, A.:
Nanosecond pulsed fiber laser as a tool for laser micro welding.
Procedia CIRP 94, 571-576 (2020)
http://dx.doi.org/10.1016/j.procir.2020.09.077 (Open Access)

Halm, U., Arntz-Schroeder, D., Gillner, A., Schulz, W.:
Towards Online-Prediction of Quality Features in Laser Fusion Cutting Using Neural Networks.
SAI Intelligent Systems Conference, 3-4 September, London, United Kingdom.
Proceedings of the 2020 Intelligent Systems Conference (IntelliSys), Volume 1,
(Advances in Intelligent Systems and Computing (AISC, volume 1250)), 346-359, (2020).
http://dx.doi.org/10.1007/978-3-030-55180-3_26

Halm, U., Niessen, M., Arntz, D., Gillner, A., Schulz, W.:
Simulation of the Temperature Profile on the Cutting Edge in Laser Fusion Cutting.’
WLT/LiM Lasers in Manufacturing Conference 2019. Munich, June 23-27 2019.
Proceedings of World of Photonics, (6 S.), (2020).

Hama-Saleh, R., Weisheit, A., Schleifenbaum, J., Ünsal, I., Sviridov, A., Bambach, M.:
Formability Analysis of Micro-Alloyed Sheet Metals Reinforced by Additive Manufacturing.
23rd International Conference on Material Forming, 4th - 8th May, 2020, virtual.
Procedia Manufacturing 47, 1023-1028, (2020).
http://dx.doi.org/10.1016/j.promfg.2020.04.317 (Open Access)

Hamid, S., Heberling, D., Junghahnel, M., Preussner, T., Gretzki, P., Pongratz, L., Hordemann, C., Gillner, A.:
Optically Transparent Antenna Integrated inside a Headlamp for Automotive Radar Application.
14th European Conference on Antennas and Propagation (EuCAP 2020),15-20 March 2020, Copenhagen, Denmark.
Antennas and Propagation (EuCAP), 2020 14th European Conference, art. no. 9135927, (2020).
https://doi.org/10.23919/EuCAP48036.2020.9135927

He, C, Weber, M., Gillner A.:
Recast-Free Helical Drilling of Fused Silica Using SHG Picosecond Laser Pulses.
Journal of Laser Micro/Nanoengineering 15(2), 153-168,(2020)
https://doi.org/10.2961/jlmn.2020.02.2014

He, C., Weber, M., Gillner, A.:
Recast-free helical drilling of fused silica using SHG picosecond laser pulses.
LPM2020 – the 21st International Symposium on Laser Precision Microfabrication, 23-26 June 2020. Proceedings of LPM2020 (2020)

Hofmann, J., Bonhoff, T., Stollenwerk, J., Loosen, P.:
Auslegungsmethodik für Kunststoffoptiken in Laseranwendungen.
121. Jahrestagung der Deutschen Gesellschaft für angewandte Optik e. V. (DGaO), 02. - 06. Juni 2020. BremenDGaO-Proceedings, A19, (2 S.), (2020)

Hofmann, O., Stollenwerk, J., Loosen, P.:
Design of Multi-Beam Optics for High Throughput Parallel Processing.
Journal of Laser Applications 32 (1), 012005- (2020)
https://doi.org/10.2351/1.5125778

Hofmann, O., Chemerenko, O., Finger, J., Eifel, S., Stollenwerk, J., Loosen, P.:
Highly dynamic positioning of individual laser beams in a multi-beam system for laser surface processing.
11th CIRP Conference on Photonic Technologies [LANE 2020] on September 7-10 2020, virtuell. Procedia CIRP 94, 812-816, (2020)
https://doi.org/10.1016/j.procir.2020.09.123 (Open Access)

Hollatz, S., Heinen, P., Limpert, E., Olowinsky, A., Gillner, A.:
Overlap joining of aluminium and copper using laser micro welding with spatial power modulation.
Welding in the World, (10 S.) (2020)
https://doi.org/10.1007/s40194-020-00848-9

Hollatz, S., Kremer, S., Ünlübayir, C., Sauer, D., Olowinsky, A., Gillner, A.:
Electrical modelling and investigation of laser beam welded joints for lithium-ion batteries.
Batteries 6(2), 24, (12 S.) (2020)
https://doi.org/10.3390/batteries6020024 (Open Access)

Holzer, A., Koß, S., Matthiesen, G., Merget, D., Ziegler, S., Schleifenbaum, J. H., Schmitz, K.:
Tribological investigations on additively manufactured surfaces using Extreme High-Speed Laser Material Deposition (EHLA) and Laser Powder Bed Fusion (LPBF).
12th International Fluid Power Conference, October 12-14, 2020 in Dresden. Volume 1 – Symposium . Dresden : Technische Universität Dresden, 119-128, (2020).

Hummel, M., Schöler, C., Häusler, A., Gillner, A., Poprawe, R.:
New approaches on laser micro welding of copper by using a laser beam source with a wavelength of 450 nm.
Journal of Advanced Joining Processes 1, 100012- (2020)
http://dx.doi.org/10.1016/j.jajp.2020.100012 (Open Access)

Hummel, M. , Haeusler, A. , Olowinsky, A. , Gillner, A. , Poprawe, R.:
Comparing 1070 nm and 515 nm wavelength laser beam sources in terms of efficiency for laser microwelding copper.
Lasers in Engineering 46(4), 187-202 (2020)

Jaeckle, E., Brauchle, E., Nottrodt, N., Wehner, M., Lensing, R., Gillner, A., Schenke-Layland, K., Bach, M., Burger-Kentischer, A.:
Towards automation in biologics production via Raman micro-spectroscopy, laser-induced forward cell transfer and surface-enhanced Raman spectroscopy.
Journal of Biotechnology 323, 3136-321,(2020)
http://dx.doi.org/10.1016/j.jbiotec.2020.09.001

Jung, M., Trum, C., Schmidbauer, B., Willenborg, E., Rascher, R.:
Non-ablative removal of sub surface damages in ground optical glass substrates by controlled melting of thin surface layers using CO2-laser radiation.
Seventh European Seminar on Precision Optics Manufacturing, 31.03. - 01.04.2020, Teisnach (Germany).
Proc. SPIE 11478, Seventh European Seminar on Precision Optics Manufacturing, 1147804- (10 S.), (2020).
http://dx.doi.org/10.1117/12.2564801

Jungbluth, B., Elsen, F., Herbst, F., Hoffmann, H.:
Long-Pass Type Quantum Imaging Interferometer with Undetected Photons in the Infrared Wavelength Range.
Frontiers in Optics 2020, 14–17 September 2020, Washington, DC United States.
Frontiers in Optics, Laser Science OSA Technical Digest (Optical Society of America, 2020), paper JTh4A.38, (2 S.), (2020)
http://dx.doi.org/10.1364/fio.2020.jth4a.38

Kalupka, C., Finger, J.:
Precision processing of ceramics with ultrashort pulse lasers/
Präzisionsbearbeitung von Keramiken mit Ultrakurzpulslasern.
Keramische Zeitschrift 72(2), 44-47 (2020)
https://doi.org/10.1007/s42410-020-0117-0

Kies, F., Wilms, M.B., Pirch, N., Pradeep, K.G., Schleifenbaum J.H., Haase, C.:
Defect formation and prevention in directed energy deposition of high-manganese steels and the effect on mechanical properties.
Materials Science and Engineering A 772 (2020)
https://doi.org/10.1016/j.msea.2019.138688

Kies, F., Ikeda, Y., Ewald, S., Schleifenbaum, J.H., Hallstedt, B., Körmann, F., Haase, C.:
Combined Al and C alloying enables mechanism-oriented design of multi-principal element alloys: Ab initio calculations and experiments.
Scripta Materialia 178, 366-371 (2020)
https://doi.org/10.1016/j.scriptamat.2019.12.004

Kini, A.R., Maischner, D., Weisheit, A., Ponge, D., Gault, B., Jägle, E.A., Raabe, D.:
In-situ synthesis via laser metal deposition of a lean Cu-3.4Cr-0.6Nb (at.%) conductive alloy hardened by Cr nano-scale precipitates and by Laves phase micro-particles.
ACTA MATERIALIA 197, 330-340 (2020)
https://doi.org/10.1016/j.actamat.2020.07.035

Kittel, J., Gasser, A., Wissenbach, K., Zhong, C., Schleifenbaum, J., Palm, F.:
Case study on AM of an IN718 aircraft component using the LMD process.
1th CIRP Conference on Photonic Technologies [LANE 2020] on September 7-10, 2020.
Procedia CIRP 94, 324-329, (2020).
http://dx.doi.org/10.1016/j.procir.2020.09.061 (Open Access)

Klein, S., Giesberts, M., Baer, P., Raguse, M., Fitzau, O., Traub, M., Hoffmann, H.-D., Krause, V., Rehmann, G.:
Fiber Bragg gratings in active multimode XLMA fibers for high-power kW-class fiber lasers.
SPIE LASE, 01-06 Feb. 2020, San Francisco, California, United States. Proceedings Volume 11260, Fiber Lasers XVII: Technology and Systems, 1126025 (2020)
https://doi.org/10.1117/12.2545738

Köhnen, P., Ewald, S., Schleifenbaum, J.H., Belyakov, A., Haase, C.:
Controlling microstructure and mechanical properties of additively manufactured high-strength steels by tailored solidification.
Additive Manufacturing 35, 101389- (2020)
https://doi.org/10.1016/j.addma.2020.101389

König, G., Grochowski M., Eckert, M., Jakobczak, F., Stollenwerk, J., Kowalewski, S., Loosen P.:
Apparat zur automatisierten Justage optischer Systeme.
121. Jahrestagung der Deutschen Gesellschaft für angewandte Optik e. V.(DGaO), 02. - 06. Juni 2020. Bremen, DGaO-Proceedings, A23 (2 S.) (2020)

Knaak, C., Abels, P.:
KI-basierte Prozessüberwachung von Laserstrahl-Schweißnähten.
Qualität und Zuverlässigkeit, 65(4), 60-62 (2020)

Knaak, C., Abels, P.:
AI-based quality monitoring of auto-body weld joints in real time.
Laser Systems Europe 47, 12-14 (2020)

Krewinkel, R., Such, A., de la Torre, A., Wiedermann, A., Castillo, D., Rodriguez, S., Schleifenbaum, J., Blaswich, M.:
Design and Characterization of Additively Manufactured NGVs Operated in a Small Industrial Gas Turbine.
International Journal of Gas Turbine, Propulsion and Power Systems 11(4), 36-44, (2020)
http://dx.doi.org/10.38036/jgpp.11.4_36 (Open Access)

Kucirek, P., Erben, B., Hörmann, F., Traub, M., Hoefer, M.:
Rod and Slab Type Cw and Q-switched Tm:YLF Lasers.
OSA High-brightness Sources and Light-driven Interactions Congress 2020 (EUVXRAY, HILAS, MICS) OSA Technical Digest (Optical Society of America, 2020), paper MTh3C.4, (2 S.) (2020)
http://dx.doi.org/10.1364/mics.2020.mth3c.4

Kunz, J., Saewe, J., Herzog, S., Kaletsch, A., Schleifenbaum, J.H., Broeckmann, C.:
Mechanical Properties of High-Speed Steel AISI M50 Produced by Laser Powder Bed Fusion.
Steel Research International 91(5), 1900562 -(9 S.), (2020)
https://doi.org/10.1002/srin.201900562

Kürnsteiner, P., Bajaj, P., Gupta, A., Wilms, M., Weisheit, A., Li, X., Leinenbach, C., Gault, B., Jägle, E., Raabe, D.:
Control of thermally stable core-shell nano-precipitates in additively manufactured Al-Sc-Zr alloys.
Additive Manufacturing 32, 100910- (2020)
http://dx.doi.org/10.1016/j.addma.2019.100910

Lensing, R., Nottrodt, N.:
Cell separation for innovative drug development.
inno-Innovative Technologies - New Applications 25(76), 13, (2020)

Li, Z., Chen, J., Sui, S., Zhong, C., Lu, X., Lin, X.:
The microstructure evolution and tensile properties of Inconel 718 fabricated by high-deposition-rate laser directed energy deposition.
Additive Manufacturing 31, 100941- (2020)
https://doi.org/10.1016/j.addma.2019.100941

Liu, D., Wu, D., Ma, G., Zhong, C., Niu, F., Gasser, A., Schleifenbaum, J., Bi, G.:
Effect of post-deposition heat treatment on laser-TIG hybrid additive manufactured Al-Cu alloy.
Virtual and Physical Prototyping 15(4), 445-459, (2020)
http://dx.doi.org/10.1080/17452759.2020.1818021

Lüttgenau, B., Brose, S., Danylyuk, S., Stollenwerk, J., Loosen, P:
Novel high-contrast phase-shifting masks for EUV interference lithography.
SPIE Advanced Lithography, 23-27 February 2020, San Jose, California. Extreme Ultraviolet (EUV) Lithography XI (Proc. of SPIE), 113231Q, (10 S.) (2019).
https://doi.org/10.1117/12.2551856

Lüttgenau, B., Brose, S., Choi, S., Panitzek, D., Danylyuk, S., Lebert, R., Stollenwerk, J., Loosen, P.:
Design and realization of an industrial stand-alone EUV resist qualification setup.
SPIE Photomask Technology + EUV Lithography, 2020, Online Only. Extreme Ultraviolet Lithography 2020 (Proc. SPIE 2020), 115171 , 115171F (12 S.),(2020)
http://dx.doi.org/10.1117/12.2572803

Matthiesen, G., Merget, D., Pietrzyk, T., Ziegler, S., Schleifenbaum, J. H., Schmitz, K.:
Design and experimental investigation of an additive manufactured compact drive.
12th International Fluid Power Conference, October 12-14, 2020 in Dresden. Volume 1 – Symposium . Dresden : Technische Universität Dresden, 137-147 (2020)
https://doi.org/10.25368/2020.21

Meiners, F., Ihne, J., Jürgens, P., Hemes, S., Mathes, M., Sizova, I., Bambach, M., Hama-Saleh, R., Weisheit, A.:
New Hybrid Manufacturing Routes Combining Forging and Additive Manufacturing to Efficiently Produce High Performance Components from Ti-6Al-4V.
23rd International Conference on Material Forming, 4th - 8th May, 2020, virtual.
Procedia Manufacturing 47, 261-267, (2020).
http://dx.doi.org/10.1016/j.promfg.2020.04.215 (Open Access)

Molina, V., Weisheit, A., Gein, S., Hecht, U., Vogiatzief, D.:
Laser Metal Deposition of Ultra-fine Duplex AlCrFe2Ni2-based High Entropy Alloy.
frontiers in Materials – Structural materials 7, 275- (10 S.), (2020)
https://doi.org/10.3389/fmats.2020.00275 (Open Access)

Munk, A.; Strotkamp, M.; Jungbluth, B.; Froh, J.; Mense, T.; Mauer, A.; Höffner, J.:
Rugged diode-pumped Alexandrite laser as an emitter in a compact mobile lidar system for atmospheric measurements.
APPLIED OPTICS, (Online first), (21 S.), (2020)
https://doi.org/10.1364/AO.422634

Noll, R.:
19. Industrial Applications of LIBS.
In: Jagdish Singh Surya Thakur(Ed.): Laser-Induced Breakdown Spectroscopy, 2, Elsevier, 421-440 (2020)

Noll, R., Bergamos, M., Bergmann, K., Brumm, H., Eschen, , Fricke-Begemann, C., Gorewoda, T., Markowe, J., Sanez, J., Schreckenberg, F., Tori, A., Veglia, F.:
Process line for the automated dismantling and sorting of valuable components from printed circuit boards.
Berliner Recycling- und Rohstoffkonferenz, 11. und 12. März 2019, Berlin. In: Holm, O., et.al.(Hgg.): Recycling- und Sekundärrohstoffe, Bd. 13, S: 587-608, (2020)

Noll, R., Bergmann, K., Fricke‐Begemann, C., Schreckenberg, F.:
Inverse Produktion für nachhaltige Wertstoffkreisläufe – Aktuelle Entwicklungen zur automatisierten Demontage und Entstückung von Elektronikplatinen.
Chemie Ingenieur Technik 92(4), 360-367, (2020)
http://dx.doi.org/10.1002/cite.201900123 (Open Access)

Nguyen, N.-P., Schnabel, J.:
Glas und Kunststoff vereint.
KUNSTSTOFFE 8, 39-41 (2020)

Nguyen, N.-P., Behrens, S., Brosda, M., Olowinsky, A., Gillner, A.:
Laser transmission welding of absorber-free semi-crystalline polypropylene by using a quasi-simultaneous irradiation strategy.
Welding in the World 64, 1227-1235 (2020)
https://doi.org/10.1007/s40194-020-00913-3 (Open Access)

Nguyen, N.-P., Behrens, S., Brosda, M., Olowinsky, A., Gillner, A.:
Modelling and thermal simulation of absorber-free quasi-simultaneous laser welding of transparent plastics.
Welding in the World 64, 1939-1946, (2020)
https://doi.org/10.1007/s40194-020-00973-5 (Open Access)

Nyga, S., Jungbluth, B., Elsen, F., Röhrig, A., Hoffmann, H.:
Picosecond laser source at 3.4 microns for laser material processing of polymers.
SPIE LASE, 1-6 February 2020, San Francisco, California, United States.
Proceedings Volume 11259, Solid State Lasers XXIX: Technology and Devices; 112590D (2020)
http://dx.doi.org/10.1117/12.2544222

Osbild, M., Brenner, A., Röther, L., Finger, J.:
Ultrashort pulse laser micro polishing of steel – Investigation of the melt pool depth.
1th CIRP Conference on Photonic Technologies [LANE 2020] on September 7-10, 2020.
Procedia CIRP 94, 936-941, (2020).
http://dx.doi.org/10.1016/j.procir.2020.09.094 (Open Access)

Raffeis, I., Adjei-Kyeremeh, F., Vroomen, U., Westhoff, E., Bremen, S., Hohoi, A., Bührig-Polaczek, A.:
Qualification of a Ni–Cu Alloy for the Laser Powder Bed Fusion Process (LPBF): Its Microstructure and Mechanical Properties.
Applied Sciences 10(10), 3401-(15 S.), (2020)
https://doi.org/10.3390/app10103401 (Open Access)

Rehberger, M., Noll, M.:
DMS-Sensoren aus dem 3D-Druck mit Low-Power-Funk-Telemetrie.
Elektronik-Praxis 17, 46-48 (2020)

Rittinghaus, S.-K.,Schmelzer, J., Rackel, M. W., Hemes, S., Vogelpoth, A., Hecht, U., Weisheit, A.:
Direct Energy Deposition of TiAl for Hybrid Manufacturing and Repair of Turbine Blades.
Materials 13(19), 4392 (14 S), (2020)
https://doi.org/10.3390/ma13194392 (Open Access)

Schaible, J., Brucki, M., Pirch, N., Schopphoven, T., Hau, L. A., Schleifenbaum, J. H.:
Analysis of the Process Conditions for the Coating of Grey Cast Iron Brake Discs through Laser Material Deposition.
Eurobrake 2020 International braking technology community, Online presentations and downloadable papers.
Proceedings of Eurobrake 2020, Paper EB2020-MDS-020 (8 S.), (2020)

Schaible, J., Sayk, L., Schopphoven, T., Schleifenbaum, J. H., Häfner, C.:
Development of a High-speed Laser Material Deposition Process for Additive Manufacturing.
39th International Congress on Applications of Lasers & Electro-Optics, October 18 - 21, 2021, San Diego. ICALEO 2020 Proceedings, paper 119, (10 S.), (2020)

Schaible, J., Hau, L. A., Weber, D., Schopphoven, T., Häfner, C., Schleifenbaum, J. H.:
Particle Velocity Measurement in Powder Gas Jets of Coaxial Powder Nozzles for Laser Material Deposition.
39th International Congress on Applications of Lasers & Electro-Optics, October 18 - 21, 2021, San Diego. ICALEO 2020 Proceedings, paper 4, (10 S.), (2020)

Schleifenbaum, J. H., Tenbrock, C., Emmelmann, C., Leyens, C., Brückner, F., Michaelis, A.:
Future AM. The Next Generation of Additive Manufacturing Processes.
Biological Transformation, Springer, 225-246 (2020)
https://doi.org/10.1007/978-3-662-59659-3_12

Schöler, C., Nießen, M., Hummel, M., Olowinsky, A., Gillner, A., Schulz, W.:
Modeling and simulation of laser micro welding.
WLT/LiM Lasers in Manufacturing Conference 2019. Munich, June 23-27 2019.
Proceedings of World of Photonics, (10 S.), (2020).

Schopphoven, T., Pirch, N., Mann, S., Poprawe, R., Häfner, C.L., Schleifenbaum, J.H.:
Statistical/Numerical Model of the Powder-Gas Jet for Extreme High-Speed Laser Material Deposition.
Coatings 10(4), 416- (17 S.), (2020)
https://doi.org/10.3390/coatings10040416 (Open Access)

Schröder, S., Bahrenberg, L., Eryilmaz, N. K., Glabisch, S., Danylyuk, S., Brose, S., Stollenwerk, J., Loosen, P.:
Accuracy analysis of a stand-alone EUV spectrometer for the characterization of ultrathin films and nanoscale gratings.
SPIE Photomask Technology + EUV Lithography, 2020, Online Only. Extreme Ultraviolet Lithography 2020 (Proc. SPIE 2020), 11517, 115170S (2020)
https://doi.org/10.1117/12.2573148

Spancken, D., Laveuve, D., Beck, J., Stötzner, N., van der Straeten, K., Büter, A., Henning, F.:
Hybrid materials - Joining of polymers and metals.
18th European Conference on Composite Materials, Athens, Greece, 24-28th June 2018. Proceedings of ECCM18, (8 S.), (2020)

Stoyanov, S., Petring, D., Arntz-Schroeder, D., Günder, M., Gillner, A., Poprawe, R.:
Investigation on the melt ejection and burr formation during laser fusion cutting of stainless steel.
Journal of Laser Applications 32(2), 022068- (9 S.) (2020)
https://doi.org/10.2351/7.0000074

Tan, H., Fang, Y., Zhong, C., Yuan, Z., Fan, W., Li, Z., Chen, J., Lin, X.:
Investigation of heating behavior of laser beam on powder stream in directed energy deposition.
SURFACE & COATINGS TECHNOLOGY 397, 126061- (2020)
https://doi.org/10.1016/j.surfcoat.2020.126061

Temmler, A., Pirch, N., Luo, J., Schleifenbaum, J., Häfner, C.:
Numerical and experimental investigation on formation of surface structures in laser remelting for additive-manufactured Inconel 718.
SURFACE & COATINGS TECHNOLOGY 403, 126370-, (25 S.), (2020)
http://dx.doi.org/10.1016/j.surfcoat.2020.126370  (Open Access)

Tenbrock, C., Fischer, F., Wissenbach, K., Schleifenbaum, J.H., Wagenblast, P., Meiners, W., Wagner, J.:
Influence of keyhole and conduction mode melting for top-hat shaped beam profiles in laser powder bed fusion.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 278,116514- (10 S.) (2020)
https://doi.org/10.1016/j.jmatprotec.2019.116514

Thoss A., van der Straeten, K.:
Joining composites and metal: A laser process.
INDUSTRIAL LASER SOLUTIONS 35(3), 8-9 (2020)

Trum, C., Jung, M., Schmidbauer, B., Sitzberger, S., Willenborg, E., Rascher, R.:
Hybrid-process-chain for polishing optical glass lenses – HyoptO.
SPIE Optical Engineering + Applications, 24 AUGUST - 4 SEPTEMBER 2020, Online Only.
Proceedings Volume 11487, FOptical Manufacturing and Testing XIII, 114871L, (2020).
http://dx.doi.org/10.1117/12.2568400

Ünal-Saewe, T., Gahn, L., Kittel, J., Gasser, A., Schleifenbaum, J.H.:
Process Development for Tip Repair of Complex Shaped Turbine Blades with IN718.
23rd International Conference on Material Forming, 4th - 8th May, 2020, virtual.
Procedia Manufacturing 47, 1050-1057, (2020).
http://dx.doi.org/10.1016/j.promfg.2020.04.114 (Open Access)

Ünal-Saewe, T., Vedder, C., Vervoort, S., & Schleifenbaum, J. H.:
Digitaler Zwilling im Produktlebenszyklus additiv gefertigter Komponenten.
Handbuch Industrie 4.0: Recht, Technik, Gesellschaft, Springer, 591-602 (2020)
https://doi.org/10.1007/978-3-662-58474-3_30

von Boeselager, C., Müller, A., Helm, J., Brodhun, J., Glodde, A., Olowinsky, A., Leithoff, R., Fröhlich, A., Kandula, M.W., Dietrich, F., Dröder, K., Dilger, K.:
A novel high-throuput process for the production of lithium ion battery cells /
Neuartiges hochdurchsatzverfahren bei der zellherstellung von lithium-ionen-batterien durchsatzgesteigerte batteriezellproduktion.
WT Werkstattstechnik 110(9), 585-590 (2020)
https://doi.org/10.37544/1436-4980-2020-09-15

van der Straeten, K.:
Alternativen zum Kleben und mechanischen Fügen.
KUNSTSTOFFE 12, 16-19, (2020)

van der Straeten, K.:
Alternatives to Gluing and Mechanical Joining.
KUNSTSTOFFE INTERNATIONAL, 12, 16-19, (2020)

Villapún, V., Gomez, A., Wei, W., Dover, L., Thompson, J., Barthels, T., Rodriguez, J., Cox, S., González, S.:
Development of antibacterial steel surfaces through laser texturing.
APL Materials 8(9), 091108- (10 S.) (2020)
https://doi.org/10.1063/5.0017580 (Open Access)

Vogiatzief, D., Evirgen, A., Gein, S., Molina, V.R., Weisheit, A., Pedersen, M.:
Laser powder bed fusion and heat treatment of an AlCrFe2Ni2 high entropy alloy
Frontiers in Materials – Structural materials 7, 248- (12 S.), (2020)
https://doi.org/10.3389/fmats.2020.00248 (Open Access)

Vogt, S., Weisheit, A., Schleifenbaum, J.H.:
Local Laser Softening of Cold Forming Steels.
Journal of Laser Applications 32(4),42020, (7 S.), (2020)
https://doi.org/10.2351/7.0000221

Völl, A., Berens, M., Wester, R., Buske, P., Stollenwerk, J., Loosen, P.:
Freeform Optics Design for Extended Sources in Paraxial Approximation Exploiting the Expectation Maximization Algorithm.
OPTICS EXPRESS 28(24), 37004-37014 (2020)
https://doi.org/10.1364/OE.412541

Vrábel, J., Képeš, E., Duponchel, L., Motto-Ros, V., Fabre, C., Connemann, S., Schreckenberg, F., Prasse, P., Riebe, D., Junjuri, R., Gundawar, M.K.,  Tan, X., Pořízka, P., Kaiser, J.:
Classification of challenging LIBS soil sample data - EMSLIBS contest.
Spectrochimica Acta Part B: Atomic Spectroscopy 169, 105872- (12 S.), (2020)
https://doi.org/10.1016/j.sab.2020.105872 (Open Access)

Walochnik, M., Jungbluth, B., Huber, H., Ammersbach, J., Munk, A., Strotkamp, M., Traub, M., Hoffmann, D., Poprawe, R.:
Diode-pumped cw Alexandrite laser with temporally stable 6.5 W in TEM00 operation with prospect of power scaling.
OPTICS EXPRESS 28(11), 15761-15769 (2020)
https://doi.org/10.1364/OE.391274

Weiß, C.:
Densification Behavior And Pore Morphology at High Layer Thicknesses for LPBF Processing of Gas- And Water-atomized 316L Powders.
Fraunhofer Direct Digital Manufacturing Conference DDMC 2020. Conference Proceedings, 23 June 2020, Berlin, Germany. In: Müller, B. (Hrsg.): Proceedings. Direct Digital Manufacturing Conference, 2020, 8 (7 S.), (2020)
ISBN 978-3-8396-1521-8

Willkomm, J., Jauer, L., Ziegler, S., Schleifenbaum, J.H.:
Development of individual medical implants with specific mechanical properties manufactured by Laser Powder Bed Fusion.
CAOS 2020. The 20th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery. Ferdinando Rodriguez Y Baena and Fabio Tatti (editors). CAOS 2020. The 20th Annual Meeting of the International Society for Computer 4, 297-300, (2020).
https://doi.org/10.29007/f8gt (Open Access)

Zhao, T., Dahmen, M., Cai, W., Alkhayat, M., Schaible, J., Zhong, C., Hong, C., Biermann, T., Zhang, H., Gu D., Weisheit, A., Gasser, A., Schleifenbaum J.H.:
Laser Metal Deposition for Additive Manufacturing of AA5024 and Nanoparticulate TiC Modified AA5024 Alloy Composites Prepared with Balling Milling Process.
OPTICS AND LASER TECHNOLOGY 131, 106438- (14 S.), (2020)
https://doi.org/10.1016/j.optlastec.2020.106438 (Open Access)

Zhong, C., Liu, J., Zhao, T., Schopphoven T., Fu, J., Gasser, A., Schleifenbaum J.H.:
Laser Metal Deposition of Ti6Al4V—A Brief Review.
Appl. Sci.10(3), 764 (12 S.), (2020)
https://doi.org/10.3390/app10030764 (Open Access)

Zhong, C., Narayana Samy, V.P.., Pirch, N., Gasser, Andres, Phanikumar, G., Schleifenbaum, J.H.:
Heat treatment design for IN718 by Laser metal deposition with high deposition rates — Modeling, simulation and experiments.
Acta Materialia, A-20-3258 (15 S.) (2020)
http://dx.doi.org/10.2139/ssrn.3711240

Zhang, Q., Zhang, P.,Yu, Z., Yan, H., Shi, H.,  Wu, D.,  Li, S., Tian, Y.:
Microstructure and Properties of an Al 6061/Galvanized Plate Fabricated by CMT Welding.
Journal of Wuhan University of Technology-Mater. Sci. Ed. 35, 937-945 (2020)
https: //doi. org/10.1007/s11595-020-2340-3

Zielinski, J., Kruse, H., Bold, M., Boussinot, G., Apel, M., Schleifenbaum, J.H.:
Melt Pool Formation and Out-of-Equilibrium Solidification During the Laser Metal Deposition Process.
EMPOrIA 2020: Enhanced Material, Parts Optimization and Process Intensification, 19-20 May, Aachen, Germany (Lecture Notes in Mechanical Engineering), 113-122 (2021)
https://doi.org/10.1007/978-3-030-70332-5_11

Adams, M., Holly C., Rauch S., Traub M.:
Analysis of the Non-Injecting Mirror Concept for Feedback-Resistant High-Power Laser Diodes with a Multiphysics Model.
CLEO: Science and Innovations 2022, San Jose, California United States, 15–20 May 2022. Technical Digest Series (Optica Publishing Group, 2022), paper SS2D.1 (2 S.), (2022).
https://doi.org/10.1364/CLEO_SI.2022.SS2D.1

Adams M., Rauch S., Holly C., Traub M., Hoffmann D.:
Multiphysics modeling of feedback-induced catastrophic optical damage in 9xx-nm high-power laser diodes.
SPIE LASE 2022 | San Francisco, California, United States | 22 Jan. - 28 Feb. 2022. Proceedings Volume 11983, High-Power Diode Laser Technology XX, 119830E, (9 S.) (2022)
https://doi.org/10.1117/12.2608103

Babst, N., Isbell, L., Rommel, F., Tura, A., Ranjbar, M., Grisanti, S., Tschuch, C., Schueler, J., Doostkam, S., Reinacher, P., Duyster, J., Kakkassery, V., von Bubnoff, N.:
CXCR4, CXCR5 and CD44 May Be Involved in Homing of Lymphoma Cells into the Eye in a Patient Derived Xenograft Homing Mouse Model for Primary Vitreoretinal Lymphoma.
International Journal of Molecular Sciences 23(19 S.), 11757- (2022)
http://dx.doi.org/10.3390/ijms231911757 (Open Access)

Baer, P., Klein, S.; Raguse, M., Reiter, M., Giesberts, M., Fitzau, O., Hoffmann, H.-D:
Highly reflective Fiber Bragg Gratings in active Fibers for fiber-integrated Multi-Mode Resonators.
SPIE LASE, 2022, San Francisco, California, United States, 22 January -28. February 2022.
Proceedings Volume 11981, Fiber Lasers XIX: Technology and Systems, 1198114 - (5 S.) (2022)
https://doi.org/10.1117/12.2606583

Baer, P., Klein, S., Raguse, M., Giesberts, M., Reiter, M., Hoffmann, D.:
Monolithic highly Multi-Mode XLMA-Fiber Resonator for High Power Operation.
OPTICS EXPRESS 30(19), 33842-33849, (2022)
https://doi.org/10.1364/OE.464861 (Open Access)

Barnowski, D., Dahmen, M., Farkas, T., Petring, D., Petschke, U., Pootz, M., Schäl, R.:
Multifunctional laser processing with a digital twin.
12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 September 2022, Fürth, Germany.
Procedia CIRP 111, c822-826, (2022).
https://doi.org/10.1016/j.procir.2022.08.091 (Open Access)

Behler, K., Heußen, D., Kupper, M., Pirch, N., Lantzsch, T., Schleifenbaum, J.H.:
Energy coupling in laser powder bed fusion of copper using different laser wavelengths.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (? S.), (2022)

Belachew, N., Diebold, M., Reinacher, P., Prinz, M., Urbach, H., Erny, D., Taschner, C.:
Freiburg Neuropathology Case Conference.
Clinical Neuroradiology 32, 875-881, (2022)
http://dx.doi.org/10.1007/s00062-022-01195-6 (Open Access)

Brosda, M., Nguyen, P., Olowinsky, A., Gillner, A.:
Investigations on the influence of the material selection of the clamping device during laser transmission welding of multi-layer polymer films with wavelength-adapted laser beam sources.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (5 S.), (2022)

Buske, P., Völl, A., Eisebitt, M., Stollenwerk, J., Holly, C.:
Advanced beam shaping for laser materials processing based on diffractive neural networks.
OPTICS EXPRESS 30(13), 22798-22816 (2022)
http://dx.doi.org/10.1364/oe.459460 (Open Access)

Cheng, Q., Shi, H., Jiang, Q., Yu, Z., Zhang, P., Ye, X.:
Effect of phase composition on microstructure and wear resistance of (Al16.80Co20.74Cr20.49Fe21.28Ni20.70)99.5Ti0.5 high-entropy alloy coatings.
Materials Today Communications 31, 103765- (2022)
http://dx.doi.org/10.1016/j.mtcomm.2022.103765

Clemens, M., Warnecke, L., Olschok, S., Reisgen, U., Steiner, M.:
Direction-independent laser-GMA hybrid welding with coaxial wire feed and annular beam.
Welding in the World, online (2022)
http://dx.doi.org/10.1007/s40194-022-01427-w (Open Access)

Coenen, V., Schlaepfer, T., Sajonz, B., Reinacher, P., Döbrössy, M., Reisert, M.:
“The Heart Asks Pleasure First”—Conceptualizing Psychiatric Diseases as MAINTENANCE Network Dysfunctions through Insights from slMFB DBS in Depression and Obsessive–Compulsive Disorder.
Brain Sciences 12(4), 438 (11 S.) (2022)
http://dx.doi.org/10.3390/brainsci12040438 (Open Accesss)

Coenen, V., Sajonz, B., Hurwitz, T., Böck, M., Hosp, J., Reinacher, P., Urbach, H., Blazhenets, G., Meyer, P., Reisert, M.:
A Neuroanatomy of Positive Affect Display – Subcortical Fiber Pathways Relevant for Initiation and Modulation of Smiling and Laughing.
Frontiers in Behavioral Neuroscience 16, (14 S.), (2022)
http://dx.doi.org/10.3389/fnbeh.2022.817554 (Open Access)

Coenen, V., Schlaepfer, T., Meyer, D., Kilian, H., Spanier, S., Sajonz, B., Reinacher, P., Reisert, M.:
Resolving dyskinesias at sustained anti-OCD efficacy by steering of DBS away from the anteromedial STN to the mesencephalic ventral tegmentum – case report.
Acta Neurochirurgica 164, (5 S.), (2022)
http://dx.doi.org/10.1007/s00701-022-05206-w (Open Access)

Csók, I., Grauvogel, J., Scheiwe, C., Bardutzky, J., Wehrum, T., Beck, J., Reinacher, P., Roelz, R.:
Basic Surveillance Parameters Improve the Prediction of Delayed Cerebral Infarction After Aneurysmal Subarachnoid Hemorrhage.
Frontiers in Neurology 13, 774720- (2022)
http://dx.doi.org/10.3389/fneur.2022.774720

Dahmen, M., Vedder, C., Baek, S., Stollenwerk, J.:
Dual-beam Laser-based Processing of Tribological Polymer Coatings.
Procedia CIRP 111, 257-260 (2022)
https://doi.org/10.1016/j.procir.2022.08.061 (Open Access)

Dahmen, M., Baumgartner, J., Möller, B., Olfert, V., Wagener, R.:
Joining technology and mechanical properties of laser-beam welded joints with martensitic chromium steels.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (11 S.), (2022)

Dahmen, M., Vedder, C., Speckens, M., Stollenwerk, J., Loosen, P.:
Influence of surface preheating and pretreatment on the adhesion of laser-melted PEEK to aluminum substrates.
SURFACE & COATINGS TECHNOLOGY 448128922- (2022)
https://doi.org/10.1016/j.surfcoat.2022.128922 (Open Access)

Dahmen, M., Deniz, B., Petring, D.:
Metallurgy of dissimilar laser beam welded lap joints of supra-ductile and ultra-high strength steels.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (9 S.), (2022)

Demerath, T., Stanicki, A., Rölz, R., Farina Nunez, M., Bissolo, M., Steiert, C., Fistouris, P., Coenen, V., Urbach, H., Fung, C., Beck, J., Reinacher, P.:
P55 Accuracy of augmented reality-guided (AR) drainage versus stereotactic and conventional puncture in an intracerebral hemorrhage phantom model.
Journal of NeuroInterventional Surgery 14(2), (2022)
http://dx.doi.org/10.1136/neurintsurg-2022-esmint.76 (Open Access)

Egger, K., Rau, A., Urbach, H., Reisert, M., Reinacher, P.:
3D X-ray based visualization of directional deep brain stimulation lead orientation.
Journal of Neuroradiology 49(3), 293-297, (2022)
http://dx.doi.org/10.1016/j.neurad.2021.05.002

Feng, J., Zhang, P., Jia, Z., Yu, Z., Fang, C., Yan, H., Shi, H., Tian, Y., Xie, F.:
Laser additive manufacturing and post-heat treatment on microstructure and mechanical properties of 9Cr steel.
International Journal of Pressure Vessels and Piping 198, 104681- (2022)
http://dx.doi.org/10.1016/j.ijpvp.2022.104681

Fink, S., Lübben, J., Schneller, T., Vedder, C., Böttger, U.:
Impact of the processing temperature on the laser-based crystallization of chemical solution deposited lead zirconate titanate thin films on short timescales.
JOURNAL OF APPLIED PHYSICS 131(12), 125302- (9 S.) (2022)
https://doi.org/10.1016/10.1063/5.0084953 (Open Access)

Fink, S., Dahmen, L., Vedder, C., Stollenwerk, J.:
Laser-based, direct formation of thin copper-nickel alloy films with low thermal coefficient of resistivity.
JOURNAL OF APPLIED PHYSICS 132(20), 205301- (2022)
https://doi.org/10.1063/5.0124000 (Open Access)

Fischer, F.G., Zimmermann, M. G., Praetzsch, N., Knaak, C.:
Monitoring of the powder bed quality in metal additive manufacturing using deep transfer learning.
Materials and Design 222, 111029, (17 S.), (2022)
https://doi.org/10.1016/j.matdes.2022.111029 (Open Access)

Fistouris, P., Scheiwe, C., Grauvogel, J., Csók, I., Beck, J., Reinacher, P., Roelz, R.:
Mitigation of Blood Load Impact in Patients with Subarachnoid Hemorrhage by Cisternal Lavage.
Cerebrovascular Diseases, 1-7, (2022)
http://dx.doi.org/10.1159/000521203

Fricke-Begemann, C., Schreckenberg, F., Geisler, M., Lindemann, M.:
Laser sensors enable robotic sorting for tool alloys recycling.
9th Sensor-Based Sorting & Control 2022, 13.04-14.04.2022, Düren.
Greiff, K., Wotruba, H., Feil, A., Kroell, N., Chen, X., Gürsel, D.,Merz, V. (Hrsg.): 9th Sensor-Based Sorting & Control 2022, 273-280, (2022).
http://dx.doi.org/10.2370/9783844085457

Fu, C., Stollenwerk, J., Holly, C.:
Reinforcement learning for guiding optimization processes in optical design.
SPIE Optical Engineering + Applications, 2022, San Diego, California, United States.
Proceedings Volume 12227, Applications of Machine Learning 2022; 1222709 (2022)
http://dx.doi.org/10.1117/12.2632425

Fiedler, W., Schulze, F.:
Fugenfolgeregelung für das Fügen mit Laserstrahlung mittels koaxialer texturbasierter Bildverarbeitung.
DVS CONGRESS 2022 Große Schweißtechnische Tagung, 19. – 21.09.2022 Koblenz.
In: DVS CONGRESS 2022 Große Schweißtechnische Tagung, DVS Berichte 382, 371-378 (2022).

Geus, J. F., Elsen, F., Nyga, S., Jungbluth, B., Hoffmann, H., Häfner, C.:
Frequency down-conversion for efficient, low-noise quantum frequency converters.
SPIE OPTO, 2022, San Francisco, California, United States | 22 January - 28 February 2022.
Proceedings Volume 12015, Quantum Computing, Communication, and Simulation II; 1201506 (2022)
https://doi.org/10.1117/12.2607750

Grubert, N., Lange, O., Stollenwerk, J., Holly, C.:
Optomechanische Toleranzangaben aus dem Optikdesign nach ISO-GPS-Norm.
123. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 7.-11.Juni 2022, Pforzheim. DGaO-Proceedings 123_A32 (2022)
urn:nbn:de:0287-2022-A032-7

Grubert, N., Hofmann, O., Hesker, M., Stollenwerk, J., Holly, C.:
Beam shaping for large-area laser structuring in a roll-to-roll process.
SPIE Optical Engineering + Applications 21-26 August 2022, San Diego, California, United States.
Proceedings Volume 12216, Novel Optical Systems, Methods, and Applications XXV; 1221604 (2022).
https://doi.org/10.1117/12.2632926

Haasler, D., Gillner, A.:
Development of a deep drilling process in metals by means of ultrashort laser pulses.
SPIE LASE, 2022 Jan. 21-28, San Francisco, California, United States.
Proceedings Volume 11994, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XI; 119940I (2022).
http://dx.doi.org/10.1117/12.2625590

Haddad, E., Chung, W., Katz, O., Helm, J., Olowinsky, A., Gillner, A.:
Laser micro welding with fiber lasers for battery and fuel cell based electromobility.
Journal of Advanced Joining Processes 5, (8 S.), (2022)
http://dx.doi.org/10.1016/j.jajp.2021.100085 (Open Access)

Halm, U., Schulz, W.:
3D simulation of spatial and temporal modulation in laser beam fusion cutting.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (6 S.), (2022)

Heinigk, C., Barthels, T., Schulz, W., Nießen, M.:
A multi-scale model for ultra-short pulsed parallel laser structuring: part II. the macro-scale model.
Optical Engineering 61(9), 095103- (2022)
http://dx.doi.org/10.1117/12.2608151 (Open Access)

Hoff, L.C., Scheld, W.S., Vedder, C., Stollenwerk, J.:
Laser sintering of ceramic-based solid-state battery materials.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (7 S.), (2022)

Hoffmann, A., Kreuels, K., Gillner, A.:
Novel Thiol‐Ene Photo Resins for Stereolithography with Enhanced Mechanical and Optical Properties.
Macromolecular Materials and Engineering, 2100625- (2022)
http://dx.doi.org/10.1002/mame.202100625 (Open Access)

Hollatz, S., Hummel, M., Olowinsky, A., Gillner, A., Beckmann, F., Moosmann, J.:
Pore Formation and Melt Pool Analysis of Laser Welded Al-Cu Joints using Synchrotron Radiation.
Journal of Materials Processing Technology 309, 117738-, (8 S.), (2022)
https://doi.org/10.1016/j.jmatprotec.2022.117738 (Open Access)

Hopmann, C.; Holly, C.; Stollenwerk, J.; Liu, B.; Gerads, J.; Hofmann, J.:
Development of a coupled thermo-optical process optimization routine for plastic lenses in laser applications.
31st International Colloquium Plastics Technology, 7 –  8 Sept. 2022, Aachen. 31st International Colloquium Plastics Technology, S. 330-344, (2022)

Huang, H., Zhang, P., Tang, M., Shen, L., Yu, Z., Shi, H., Tian, Y.:
Biocompatibility of micro/nano structures on the surface of Ti6Al4V and Ti-based bulk metallic glasses induced by femtosecond laser.
Biomaterials Advances 139, 212998- (2022)
http://dx.doi.org/10.1016/j.bioadv.2022.212998

Huang, H., Zhang, P., Yu, Z., Shen, L., Shi, H., Tian, Y.:
Femtosecond laser-induced transformation mechanism from 1D groove structure to 2D microholes structure on the surface of Zr-based metallic glasses.
OPTICS AND LASER TECHNOLOGY 146, 107555- (2022)
https://doi.org/10.1016/j.optlastec.2021.107555

Hummel, M., Häusler, A., Hollatz, S., Hagenlocher, C., Lind, J., Halm, U., Schöler, C., Olowinsky, A., Gillner, A.:
Temporally and spatially highly resolved reconstruction of vapor capillary geometry during laser beam welding using synchrotron radiation.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, 979-989, (11 S.), (2022)

Itner, D., Nießen, M., Vossen, G.:
Mathematical modeling and stability analysis for laser cutting via asymptotic expansion.
International Journal of Mechanical Sciences 219, 107062- (2022)
http://dx.doi.org/10.1016/j.ijmecsci.2021.107062

Jiang, Q., Zhang, P., Yu, Z., Tian, Y., Ma, S.:
AlCoCrFeNi high entropy alloy fabricated via selective laser melting reinforced by Fe-based metallic glass.
Materials Letters 307, 130994- (2022)
https://doi.org/10.1016/j.matlet.2021.130994

Kang, S.-G., Gainov, R., Heußen, D., Bieler, S.,  Sun, Z., Weinberg, K., Dehm, G., Ramachandramoorthy, R.:
Green laser powder bed fusion based fabrication and rate-dependent mechanical properties of copper lattices.
ArXiv, 2210.13087, 31 S. (2022).
https://doi.org/10.48550/arXiv.2210.13087 (Open Access)

Kelbassa, J, Biber, A. Steiner M.F.:
Process development and mechanical properties of Ti-6Al-4V samples generated by laser material deposition with coaxial wire feed.
Journal of Laser Applications 34 (2), 022003, (2022)
https://doi.org/10.2351/7.0000491

Klingler, J., Naseri, Y., Reinacher, P., Hoedlmoser, H., Urbach, H., Hohenhaus, M.:
Patient radiation exposure from intraoperative computed tomography in spinal surgery.
The Spine Journal, Article 22(9), 1576-1578 (2022)
http://dx.doi.org/10.1016/j.spinee.2022.03.008

Kogias, E., Altenmüller, D., Karakolios, K., Egger, K., Coenen, V., Schulze-Bonhage, A., Reinacher, P.:
Electrode placement for SEEG: Combining stereotactic technique with latest generation planning software for intraoperative visualization and postoperative evaluation of accuracy and accuracy predictors.
Clinical Neurology and Neurosurgery 213, 107137- (2022)
http://dx.doi.org/10.1016/j.clineuro.2022.107137

Kunz, L., Staresina, B., Reinacher, P.C., Brandt, A.,  Guth, T.G., Schulze-Bonhage, A., Jacobs, J.:
Ripple-locked coactivity of stimulus-specific neurons supports human associative memory.
bioRXiv,  (72 S.), (2022)
https://doi.org/10.1101/2022.10.17.512635 (Open Access)

Lantzsch, T., Heussen, D., Praetzsch, N., Haefner, C.:
Evaluation of productivity scaling approaches for laser powder bed fusion of nickel-base alloy 625.
SPIE LASE, 2022, San Francisco, California, United States. Proceedings Volume 11994, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XI, 1199405 (2022)
https://doi.org/10.1117/12.2611151

Liu, Z., Zhang, P., Yan, M., Yu, Z., Tian, Y., Wu, D.:
Study of mode transition in three-dimensional laser beam oscillating welding of aluminum alloy.
Journal of Materials Processing Technology 303, 117490- (2022)
http://dx.doi.org/10.1016/j.jmatprotec.2022.117490

Li, Z., Ma, X., Zhong, C., Sui, S., Gasser, A., Chen, J.:
Microstructure homogeneity and mechanical property improvement of Inconel 718 alloy fabricated by high-deposition-rate laser directed energy deposition.
MATERIALS SCIENCE AND ENGINEERING A 832, 142430- (2022)
http://dx.doi.org/10.1016/j.msea.2021.142430

Lüttgenau, B., Panitzek, D., Danylyuk, S., Brose, S., Stollenwerk, J., Loosen, P., Holly, C.:
Design of an efficient illuminator for partially coherent sources in the extreme ultraviolet.
APPLIED OPTICS 61(11), 3026-3033 (2022)
http://dx.doi.org/10.1364/ao.452204 (Open Access)

Maischner, D., Weisheit, A., Rass, I., Kolberg, J., Kolberg, T.:
Laser based metallization of materials with low wettability for joining of hybrid material combinations.
LÖT 2022, 13th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, 21-23.6.22, Aachen, Germany. LÖT 2022, 13th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, 21-23.6.22, Aachen, Germany (DVS-Berichte 381), 221-225, (2022).

Nüsser, C., Willenborg, E.:
High-speed laser micro polishing of TiAl6V4.
Journal of Laser Applications 34(1), 012025- (2022)
https://doi.org/10.2351/7.0000383 (Open Access)

Oeser, S., Preußner, J., Rödler, G., Pirch, N., Weisheit, A.:
Laser Metal Deposition of a Near-Eutectic Al-Ni Alloy.
ADVANCED ENGINEERING MATERIALS 24(12), 2200696, (10 S.) (2022)
https://doi.org/10.1002/adem.202200696 (Open Access)

Pongratz L., Vannahme, K.:
Beam Shaping the Direct Laser Interference Patterning Spot.
Journal of Laser Micro/Nanoengineering 17(1), 42-49 (2022)
https://doi.org/10.2961/jlmn.2022.01.2007 (Open Access)

Pongratz, L.; Lantzsch, T.; Schwedt, A.:
Impact on surface topography of interference patterned steel and brass using an ultrashort pulsed laser source.
Journal of Laser Applications 34 (3), 03^1201 (11 S.) (2022)
https://doi.org/10.2351/7.0000555

Raguse, M., Klein, S., Baer, P., Giesberts, M., Traub, M., Hoffmann, H-D.:
Investigations on high-reflective Fiber-Bragg-Gratings in multimode fibers.
OSA Continuum 1(5), 965-973, (2022)
https://doi.org/10.1364/OPTCON.450150 (Open Access)

Rehberger, M., Mertin, J., Vedder, C., Stollenwerk, J., Schleifenbaum, J.:
Rotation Grids for Improved Electrical Properties of Inkjet-Printed Strain Gauges.
Sensors 22(16), 6119- (2022)
http://dx.doi.org/10.3390/s22166119 (Open Access)

Reinacher, P.C., Cimniak, A., Demerath, T., Schallner, N.:
Usage of augmented reality for interventional neuraxial procedures: A phantom-based study.
European Journal of Anaesthesiology 39,1-9 (2022)
https://doi.org/10.1097/EJA.0000000000001755

Reinheimer, E. N., Hummel, M., Olowinsky, A., Weber, R., Graf, T.:
High-speed synchrotron x-ray imaging of the formation of wedge-shaped capillaries during laser-beam welding at high feed rates.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (7 S.), (2022)

Reisert, M., Sajonz, B., Brugger, T., Reinacher, P., Russe, M., Kellner, E., Skibbe, H., Coenen, V.:
Where Position Matters—Deep-Learning–Driven Normalization and Coregistration of Computed Tomography in the Postoperative Analysis of Deep Brain Stimulation.
Neuromodulation: Technology at the Neural Interface, online first,- (2022)
https://doi.org/10.1016/j.neurom.2022.10.042

Roelz, R., Scheiwe, C., Grauvogel, J., Csok, I., Coenen, V., Beck, J., Reinacher, P.:
Early cisternal fibrinolysis is more effective than rescue spasmolysis for the prevention of delayed infarction after subarachnoid haemorrhage.
Stroke and Vascular Neurology 7(2), 108-113, (2022)
http://dx.doi.org/10.1136/svn-2021-001146 (Open Access)

Schaible, J., Hausch, D., Schopphoven, T., Häfner, C.:
Deposition strategies for generating cuboid volumes using extreme high-speed directed energy deposition.
Journal of Laser Applications 34(4), 42034- (2022)
http://dx.doi.org/10.2351/7.0000770 (Open Access)

Scheerer, F., Jacobs-LeVan, J., Metzger, S.M., Schönberger, J., Wagner, K., Schulze-Bonhage, A., Reinacher, P.C., Klotz, K.A.:
Lateralizing signs in patients with Hypothalamic Hamartoma.
Epilepsia 63(S2), 101- (2022)
https://doi.org/10.1111/epi.17388 (Open Access)

Scheld, W., Lobe, S., Uhlenbruck, S., Dellen, C., Sohn, Y., Hoff, L., Vondahlen, F., Guillon, O., Fattakhova-Rohlfing, D.:
Rapid thermal sintering of screen-printed LiCoO2 films.
THIN SOLID FILMS 749, 139177- (2022)
http://dx.doi.org/10.1016/j.tsf.2022.139177

Schröder, S., Bahrenberg, L., Lüttgenau, B., Glabisch, S., Danylyuk, S., Brose, S., Stollenwerk, J., Loosen, P., Holly, C.:
Latent image characterization by spectroscopic reflectometry in the extreme ultraviolet.
JOURNAL OF MICRO/NANOPATTERNING, MATERIALS, AND METROLOGY 21(2), 021208, (2022)
https://doi.org/10.1117/1.JMM.21.2.021208 (Open Access)

Schubnell, J., Dahmen, M., Luke, M.,
Strength improvement of laser beam welded joints in cold worked High-Manganese-steel by means of deep rolling.
12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 September 2022, Fürth, Germany. Procedia CIRP 111, 457-461 (2022).
https://doi.org/10.1016/j.procir.2022.08.065 (Open Access)

Singh, A. K., Mundada, Y., Bajaj, P., Wilms, M. B., Jägle, E. A., Raabe, D.:
Investigation of temperature distribution and solidification morphology in multi-layered directed energy deposition of Al-0.5Sc-0.5Si alloy.
Additive Manufacturing 186, 122492- (2022)
https://doi.org/10.1016/j.ijheatmasstransfer.2021.122492

Steiert, C., Behringer, S., Kraus, L., Bissolo, M., Demerath, T., Beck, J., Grauvogel, J., Reinacher, P.:
Augmented reality–assisted craniofacial reconstruction in skull base lesions — an innovative technique for single-step resection and cranioplasty in neurosurgery.
Neurosurgical Review (2022)
http://dx.doi.org/10.1007/s10143-022-01784-6 (Open Access)

Steiner, M.F., Speier, M., Kelbassa, J., Schopphoven, T., Häfner, C.L.:
Influence of tool path planning on process stability and deposition accuracy in laser material deposition with coaxial wire feed.
Journal of Laser Applications 34(1), 012026 - (2022)
https://doi.org/10.2351/7.0000483

Steiner, M.F., Clemens, M. , Olschok, S., Reisgen, U., Kelbassa, J.,  Schopphoven, T., Haefner, C.L.,
Richtungsunabhängiges Laser-MSG-Hybridschweißen mit Ringfokus und koaxialer Drahtzuführung für das Verbindungsschweißen und die additive Fertigung.
DVS Congress 2022,19. – 21. September 2022, Koblenz. DVS CONGRESS 2022 Große Schweißtechnische Tagung DVS CAMPUS (DVS-Berichte, 382), S. 730-736, (2022)

Steiner, M.F., Meyer, P., Riessner, L.,  Clemens, M., Olschok, S., Kelbassa, J., Schopphoven, T. , Haefner, C.L.:
Koaxiales Laser Lichtbogen Hybridschweißen als additives Vefahren - COLLAR Hybrid AM.
DVS Congress 2022,19. – 21. September 2022, Koblenz. DVS CONGRESS 2022 Große Schweißtechnische Tagung DVS CAMPUS (DVS-Berichte, 382), S. 129-134, (2022)

Straehle, J., Erny, D., Neidert, N., Heiland, D., El Rahal, A., Sacalean, V., Steybe, D., Schmelzeisen, R., Vlachos, A., Mizaikoff, B., Reinacher, P., Coenen, V., Prinz, M., Beck, J., Schnell, O.:
Neuropathological interpretation of stimulated Raman histology images of brain and spine tumors: part B.
Neurosurgical Review 45(2), 1721-1729, (2022)
http://dx.doi.org/10.1007/s10143-021-01711-1 (Open Access)

Tarancón, A., Esposito, V., Torrell, M., Di Vece, M., Son, J.S., Norby, P., Bag, S., Grant, P.S., Vogelpoth, A.,  Linnenbrink, S., Brucki, M., Schopphoven, T., Gasser, A., Persembe, E., Koufou, D., Kuhn, S., Ameloot, R., Hou, X.,  Engelbrecht, K., Bahl, C.R.G`H., Pryds, N., Wang, J., Tsouris, C., Miramontes, E., Love, L., Lai, C.,  Sun, X., Kærn, M.R.,  Criscuolo, G., Pedersen, D.B.:
2022 roadmap on 3D printing for energy.
Journal of Physics-Energy 4,11501, (2022)
https://doi.org/10.1088/2515-7655/ac483d (Open Access)

Temmler, A., Cortina, M., Ross, I., Küpper, M., Rittinghaus, S.:
Evolution of Surface Topography and Microstructure in Laser Polishing of Cold Work Steel 1.2379 (AISI D2) Using Quadratic, Top-Hat Shaped Intensity Distributions.
Materials 15(3), 769-(27 S.), (2022)
https://doi.org/10.3390/ma15030769 (Open Access)

Trenn, M., Hoff, L.C., Delmdahl, R., Greiber, M., Lange, K., Vedder, C.:
Excimer laser sintering of ceramic thin films for solid state batteries.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (6 S.), (2022)

Vogelpoth, A., Saewe, J., Krull, H.G., Richert, S., Weiland, P., Nerzak, T., Eibl, F., Pastors, F.:
Additive manufacturing of tool steels.
Steel Research International 9, 2200372, (5 S.), (2022)
https://doi.org/10.1002/srin.202200372 (Open Access)

Wagner, J. , Hagenlocher, C. , Hummel, M. D. , Olowinsky, A., Weber, R., Graf T.:
High-speed synchrotron X-ray investigation of full penetration welding of aluminum sheets.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, 604-608, (5 S.), (2022)

Wendt, C., Dahmen, M, Olfert, V., Sagel, A.:
Joining ultra-high strength steels by edge welds.
WLT/Lasers in Manufacturing Conference 2021, International Congress Center, Munich, Germany.
Proceedings of World of Photonics, (12 S.), (2022)

Wesselmecking, S., Kreins, M., Dahmen, M., Bleck, W.:
Material oriented crash-box design – Combining structural and material design todoc_improve specific energy absorption.
Materials and Design 213, 110357- (2022)
https://doi.org/10.1016/j.matdes.2021.110357 (Open Access)

Wu D., Zhang P., Yu Z., Gao Y., Zhang H., Chen H., Chen S., Tian Y.:
Progress and perspectives of in-situ optical monitoring in laser beam welding: Sensing, characterization and modeling.
Journal of Manufacturing Processes 75, 767-791 (2022)
https://doi.org/10.1016/j.jmapro.2022.01.044

Würtemberger, U., Diebold, M., Erny, D., Hosp, J., Schnell, O., Reinacher, P., Rau, A., Kellner, E., Reisert, M., Urbach, H., Demerath, T.:
Diffusion Microstructure Imaging to Analyze Perilesional T2 Signal Changes in Brain Metastases and Glioblastomas.
Cancers 14(5), 1155, (2022)
http://dx.doi.org/10.3390/cancers14051155 (Open Access)

Xu, X.; Zhang, D.; Deng, J.; Wu, X.; Li, L.; Xie, Y.; Poprawe, R.;   Schleifenbaum, J.H.; Ziegler, S.:
Numerical simulation in the melt pool evolution during L-PBF process for Ti6Al4V.
Materials15(21), 7585- (2022)
https://doi.org/10.3390/ma15217585 (Open Access)

Zhang, D., Yi, D., Wu, X., Liu, Z., Wang, W., Poprawe, R., Schleifenbaumc, J., Zieglerd, S.:
SiC reinforced AlSi10Mg composites fabricated by selective laser melting.
Journal of Alloys and Compounds 894, 162365- (2022)
http://dx.doi.org/10.1016/j.jallcom.2021.162365

Zhao, T., Chen, T., Wang, Y., Wang, M., Bakir, M., Dahmen, M., Gasser, A., Häfner, C.L.:
Laser Directed Energy Deposition of an AlMgScZr-Alloy in High-Speed Process Regimes.
SSRN: https://ssrn.com/abstract=4059735 or 
http://dx.doi.org/10.2139/ssrn.4059735

Zhong, C., Gasser, A., Backes, G., Fu, J., Schleifenbaum J.H.:
Laser additive manufacturing of Inconel 718 at increased deposition rates.
MATERIALS SCIENCE AND ENGINEERING A 844,143196- (2022)
https://doi.org/10.1016/j.msea.2022.143196

Zhong, C., Backes, G., Johann, L.M., Kittel, J., Schopphoven, T., Küppers, W.:
Development of a novel green coating process with laser.
Scientific Reports 12, 6314- (2022)
https://doi.org/10.1038/s41598-022-10351-4 (Open Access)

Zuric, M., Brenner, A.:
Real-time defect detection through lateral monitoring of secondary process emissions during ultrashort pulse laser microstructuring.
Optical Engineering 61(9), 094101- (16 S.), (2022)
https://doi.org/10.1117/1.OE.61.9.094101 (Open Access)

Aden, M., Gillner, A., Otto, G., Mamuschkin, V.:
Laserdurchstrahlschweißen transparenter Kunststoffe - Teil 1: Betrachtung des Energieeintrags
JOINING PLASTICS -FUEGEN VON KUNSTSTOFFEN 12(3-4), 166-172 (2018)

Arntz, D., Petring, D., Stoyanov, S., Jansen, U., Schneider, F., Poprawe, R.:
In situ visualization of multiple reflections on the cut flank during laser cutting with 1 μm wavelength.
Journal of Laser Applications 30 (3), 32206- (10 S.), (2018)

Arntz, D., Petring, D., Stoyanov, S., Quiring, N., Poprawe, R.:
Quantitative study of melt flow dynamics inside laser cutting kerfs by in-situ high-speed video-diagnostics.
Procedia CIRP 74, 640-644 (2018)

Atiyah, H., Powell, J., Petring, D., Stoyanov, S., Voisey, K.T.:
Fiber laser cutting: The use of carbon-filled acrylic as a qualitative and quantitative analysis tool.
Journal of Laser Applications 30(3), 10.2351- (9 S.), (2018)

Berens, M., Völl, A., Wester, R., Stollenwerk, J., Loosen, P.:
Density estimation in optical phase space for optimizing micro-optical elements on freeform surfaces.
SPIE Optical Systems Design, 14 - 17 May 2018, Frankfurt, Germany.
Proc. SPIE 10694, Computational Optics II, 106940N, (8 S.), (2018)

Berger, L., Bär, F., Jauer, L., Schöublin, R., Schleifenbaum, J.H., Löffler, J.F.:
Microstructure of WE43 fabricated by Laser-Powder Bed Fusion in comparison to conventionsl processing routes.
10th Symposium on Biodegradable Metals, 26-31 August, 2018, Oxord University, Oxford, England. eCM Online Periodical , 2018, Collection 6; 10th Biometal Conference Abstracts, S. 21 (2018)

Blass, D., Nyga, S., Jungbluth, B., Hoffmann, H.D., Dilger, K.:
Composite Bonding Pre-Treatment with Laser Radiation of 3 µm Wavelength: Comparison with Conventional Laser Sources.
Materials 11, 1216- (12 S.), (2018)

Bonhoff, T., Stollenwerk, J., Loosen, P.:
Multi-physical modeling of thermal and dispersive effects in optical systems for high power ultra-short laser pulses.
SPIE LASE, 27 January-1 February 2018, San Francisco, California, United States.
Proc. SPIE 10525, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII, 1052504 (9 S.) (2018)

Bonhoff, T., Poppe, M., Stollenwerk, J., Schleifenbaum, J.H., Loosen, P.:
Multi-physical analysis of thermo-optical effects for different Selective Laser Melting (SLM) scanning strategies.
Procedia CIRP 74, 97-101 (2018)

Bornschlegel, B., Finger, J.:
In-situ analysis of USP ablation with pulse bursts.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-027, (2018)

Brenner, A., Kurzidim, F., Fornaroli, C., Gillner, A.:
Combination of short and ultrashort pulse laser processing for productive large scale structuring of 3D plastic mould steel.
Journal of Laser Applications 30(3), 32509- (5 S.), (2018)

Brenner, A., Bornschlegel, B., Finger, J.:
Increasing productivity of ultrashort pulsed laser ablation for a combination process with ns-laser.
The 19th International Symposium on Laser Precision Microfabrication Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-039, (2018)

Brenner, A., Bornschlegel, B., Finger, J.:
Increasing productivity of ultrashort pulsed laser ablation for commercialization of micro structuring.
SPIE Nanoscience + Engineering, 19-23 August 2018, San Diego, California. Proceedings Volume 10730, Nanoengineering: Fabrication, Properties, Optics, and Devices XV; 107300H, (13 S.), (2018)

Brosda, M., Nguyen, P., Quach, S., Olowinsky, A., Gillner, A.:
Laser cutting of polymers with adapted NIR diode- and fiber laser systems.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-058, (2018)

Brosda, M., Nguyen, P., Olowinsky, A., Gillner, A.:
Laserwelding of biopolymers.
Procedia CIRP 74, 548-552 (2018)

Bruening, S., Jarczynski, M., Du, K., Gillner, A.:
Large scale ultrafast laser micro texturing with multi-beams.
Journal of Laser Micro/Nanoengineering 13(3), 254-262 (2018)

Bruening, S., Jarczynski, M., Du, K., Gillner, A.:
Large scale ultrafast laser micro texturing with multi-beams.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-0002, (8 S.), (2018)

Bruening, S., Du, K., Jarczynski, M., Jenke, G., Gillner, A.:
Ultra-fast laser micro processing by multiple laser spots.
Procedia CIRP 74, 573-580 (2018)

Cerwenka, G., Steinmeier, O., Petronis, E., Keßer, T., Fischer, H.W.A., Fiedler, W., Schulze, F., Emmelmann, C.:
Development of a flexible low laser power hybrid (LLPH) technology for shipbuilding including additive manufactured semi-automated hand-held unit.
10th CIRP Conference on Photonic Technologies [LANE 2018], 3.– 6. Sep. 2018, Fürth, Germany. Procedia CIRP 74 (2018), 74, 770-774 (2018)

Chung, W., Häusler, A., Olowinsky, A., Gillner, A., Poprawe, R.:
Investigation to Increase the Welding Joint Area with Modulated Laser Beam Welding over Gap.
Journal of Laser Micro/Nanoengineering 13 (2), 117-125 (2018)

Chung, W., Häusler, A., Olowinsky, A., Gillner, A., Poprawe, R.:
Investigation to increase the welding joint area with modulated laser beam welding over gap.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-010, (8 S.), (2018)

Connemann, S., Ambrosch, R.,  Bergmann, K., Britten, S., Brumm, H., Eschen, M., Fricke-Begemann, C.,  Gehlen, C.,  Kurylak, W., Noll, R., Sellin, G., Siguier, M., Tori, A., Verglia, F.:
Next generation urban mining – laser-based sensing and sorting of electronic scap.
8th Sensor-Based Sorting & Control 2018, March 6th - 7th, 2018 in Aachen. Germany. Pretz, T., Wotruba, H., Feil, A. (eds.):  8th Sensor-Based Sorting & Control 2018, 29-37 (2018)

Dai, D., Gu, D., Zhang, H., Zhang, J., Du, Y., Zhao, Y., Hong, C., Gasser, A., Poprawe, R.:
Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy.
Vacuum 154, 341-350 (2018)

Dai, D., Gu, D., Xia, M., Ma, C., Chen, H., Zhao, T., Hong, C., Gasser, A., Poprawe, R.:
Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite.
SURFACE & COATINGS TECHNOLOGY 349, 279-288 (2018)

Dai, D., Gu, D., Zhang, H.,  Xiong, J., Maa, C., Hong, C., Poprawe, R.:
Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts.
OPTICS AND LASER TECHNOLOGY 99, 91-100 (2018)
http://dx.doi.org/10.1016/j.optlastec.2017.08.015

Doñate-Buendía, C., Frömel, F., Wilms, M.B., Streubel, R., Tenkamp, J., Hupfeld, T.,
Nachev, M., Gökce, E., Weisheit, A., Barcikowski, S., Walther, F., Schleifenbaum, J.H., Gökce, B.:
Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites.
Materials and Design 154 (2018), 360-369, (2018)

Dutta Majumdar, J., Rittinghaus, S.K., Wissenbach, K., Höche, D., Blawert, C., Weisheit, A.:
Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites.
OPTICS AND LASER TECHNOLOGY 106, 182-190 (2018)

Engelmann, C., Molitor, T.:
Diodenlaser ebnet Weg zu Hybrid-Bauteilen Reproduzierbares quasisimultanes Laserfügen ersetzt Klebeprozesse.
KUNSTSTOFFE (5), 90-93, (2018)

Engelmann, C., Eckstädt, J., Weidmann, S., Popow V.:
Fertigungszelle für das vollautomatisierte Fügen von Hybridbauteilen /Production Cell for Fully Automated Joining of Hybrid Components.
Lightweight Design(6), 22-27, (2018)

Fader, R., Lorenz, J., Rommel, M., Baum, M., Danylyuk, S., Gillner, A., Stollenwerk, J.:
Strukturierungsverfahren.
In: Haas, K-H., Tovar, G. (Hrsg.): Angewandte Nanotechnologie. (Fraunhofer Allianz Nanotechnologie) Fraunhofer Verlag Stuttgart, 73-96 (2018)

Finger, J., Bornschlegel, B., Reininghaus, M., Dohrn, A., Nießen, M., Gillner, A., Poprawe, R.:
Heat input and accumulation for ultrashort pulse processing with high average power.
Advanced Optical Technologies 7 (3), 145-155 (2018)

Gayer, C.:
3D Printing Creates Patient-Specific Implants.
BioPhotonics 25 (4), 38-41 (2018)

Gayer, C., Abert, J., Bullemer, M., Grom, S., Jauer, L., Meiners, W., Reinauer, F., Vučak, V.M., Wissenbach, K., Poprawe, R., Schleifenbaum, J.H., Fischer, H.:
Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering.
J. OF THE MECH. BEHAVIOR OF BIOMED. MAT. 87, 267-278, (2018)

Geisen, O., Kersting, L., Masseling, L., Bogner, J.P., Schleifenbaum, J.H.:
Additive Manufacturing of Honeycombs Seal Strips.
Turbomachinery Technical Conference and Exposition, GT2018, June 11-15, 2018, Oslo, Norway. Proceedings of ASME Turbo Expo 2018, V02DT46A023, (8 S.), (2018)

Giesberts, M., Fitzau, O., Hoffmann, H.-D., Lange, R., Bachert, C., Krause, V.:
Directly q-switched high power resonator based on XLMA-fibers.
SPIE LASE, 27 January-1 February 20182018, San Francisco, California, United States.
Proceedings Volume 10512, Fiber Lasers XV: Technology and Systems, 1051218, (6 S.), (2018)

Gillner, A., Finger, J., Gretzki, P., Niessen, M., Bartels, T., Reininghaus, M.:
High power laser processing with ultrafast and multi-parallel beams.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-042, (2018)

Go, D., Opitz, M., Lott, P., Rahimi, K., Stollenwerk, J., Thomas, H., Möller, M., Roling, B., Kuehne, A.J.C.:
Electrochemical characterization of laser-carbonized polyacrylonitrile nanofiber nonwovens.
Journal of Applied Polymer Science, 46398- (5 S.) (2018)

Haeusler, A., Hollatz, S., Olowinsky, A., Gillner, A., Poprawe, R.:
Quality improvement of the surface of laser micro welds by using a dual beam setup.
JLA 30 (3), 032423, (6 S.) (2018)

Han, X., Courseaus, J., Khamassi, J., Nottrodt, N., 5, Engelhardt, S., Jacobsen, F., Bierwisch, C., Meyer, W., Walter, T., Weisser, J., Jaeger, R., Bibb, R., Harris, R.:
Optimized vascular network by stereolithography for tissue engineered skin.
International Journal of Bioprinting 4(2), 134- (17 S.), (2018)

He, C., Bühring, J., Gillner, A.:
Helical drilling of three-dimensional conical converging-diverging nozzle in steel using ultrashort laser pulses.
Procedia CIRP 74, 305-309 (2018)

He, C., Steger, M., Gillner, A.:
High-Efficiency Nanostructuring using Multi-Beam Interference by Consecutively Deposited Ultrashort Laser Pulses on Tool Steel.
Journal of Laser Micro/Nanoengineering 13(1), 1-35 (2018)

He, C., Vannahme, K., Gillner, A.:
High-efficiency sub-micrometer multi-beam interference structuring for large-scale surface using ultrashort laser pulses.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-043, (2018)

He, C., Buehring, J., Zibner, J., Gillner, A.:
Ultrafast Laser Helical Drilling of Three-Dimensional Shaped Holes using Synchronized Adaption of Energy Deposition.
Journal of Laser Micro/Nanoengineering 13 (1), 31-35 (2018)

Hofmann, O., Pütsch, O., Stollenwerk, J., Loosen, P.:
Model-based analysis of highly dynamic laser beam shaping using deformable mirrors.
Procedia CIRP 74, 602-606 (2018)

Hollatz, S., Ryan, C., Olowinsky, A., Gillner, A., Poprawe, R.:
Measurement of keyhole depth during laser beam micro welding with scanners.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-028, (X S.), (2018)

Holters, M., Dirks, S., Stollenwerk, J., Loosen, P.:
Automated and model-based assembly of an anamorphic telescope.
SPIE OPTO, 22 February 2018, San Francisco, California, United States.
Proc. SPIE 10538, Optical Interconnects XVIII, 105380U (2018)

Janssen, S., Eckstein, M.C.:
An Improved Scanning Strategy for Long Pulsed Laser Drilling of Carbon Fiber Textiles.
Journal of Laser Micro/Nanoengineering 13(1), 36-46, (2018)

Jauer, L., Kimm, M., Labude, N., Bienert, M., Neuß, S., Lethaus, B., D'Elia, B., Müther, M., Kopp, A., Ptock, C., Schleifenbaum, J.H.:
Process Chain for Additive Manufacturing of Magnesium Implants.
10th Symposium on Biodegradable Metals, 26-31 August, 2018, Oxord University, Oxford, England. eCM Online Periodical , 2018, Collection 6; 10th Biometal Conference Abstracts, S. 25 (2018)

Kalupka, C., Holtum, T., Reininghaus, M.:
Ultrafast dynamics of material excitation of dielectrics with ultrashort pulsed Bessel beams.
SPIE LASE, 27 January - 1 February 2018, San Francisco, California, United States.
Proc. SPIE 10520, Laser-based Micro- and Nanoprocessing XII, 105200G- (8 S.), (2018)

Kalupka, C., Schmalstieg, M., Reininghaus, M.:
Ultrashort pulse processing of transparent ceramics: The role of electronic and thermal damage mechanisms.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-070, (4 S.), (2018)

Kalupka C., Schmalstieg, M., Reininghaus, M.:
Ultrashort Pulse Processing of Transparent Ceramics: The Role of Electronic and Thermal Damage Mechanisms.
JOURNAL OF LASER MICRO/NANOENGINEERING 13 (2), 126-130 (2018)

Kelbassa, J., Gasser, A., Bremer, J., Pütsch, O., Poprawe, R., Schleifenbaum, J.H.:
Equipment and Process Windows for Laser Metal Deposition with Coaxial Wire Feeding.
37th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2018), 14-18 Okt. 2018, Orlando/FL USA.
ICALEO 2018 Proceedings, Paper #802, (2018)

Kies, F., Köhnen, P., Wilms, M.B., Brasche, F., Pradeep, K.G., Schwedt, A., Richter, S., Weisheit, A. Schleifenbaum, J.H., Christian Haase, C.:
Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality.
Materials and Design 160, 1250-1264 (2018)

Kimm, M., Schueckler, P., Schoenen, D., Corves, B., Schleifenbaum, J.H.:
Characterization of additively manufactured metal flexure hinges.
2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, 22-25 July 2018, Berkeley, USA. Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing2018, Pages 101-104, (2018)

Klocke, F., Smeets, G., Kittel, M., Olivier, M., Hama-Saleh, R., Harst, S., Klink, A.:
Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics.
10th CIRP Conference on Photonic Technologies [LANE 2018], 3.– 6. Sep. 2018, Fürth, Germany.
Procedia CIRP 71 (2018), 71, 238-243 (2018)

Knaak, C., Thombansen, U., Abels, P., Kröger, M.:
Machine learning as a comparative tool to determine the relevance of signal features in laser welding.
Procedia CIRP 74, 623-627 (2018)

Koeppe, A., Hernandez Padilla, C.A., Voshage, M., Schleifenbaum, J.H., Markert, B.:
Efficient numerical modeling of 3D-printed lattice-cell structures using neural networks.
Manufacturing Letters 15, 147-150 (2018)

Köhnen, P., Haase, C., Bültmann, J., Ziegler, S., Schleifenbaum, J.H., Bleck, W.:
Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel.
Materials and Design 145, 205-217, (2018)

Kumstel, J., Lüken, S.:
Deburring and rounding of sheet metals and functionally relevant edges of parts using laser radiation.
5th International Conference on New Forming Technology ICNFT 2018, 18. Sept.- 21.Sept.2018, Bremen, Germany.
MATEC WEB of Conferences 190, 20030 (2018), (5 S.) (2018)

Kunz, J., Herzog, S., Kaletsch, An., Broeckmann, C., Saewe, J., Gayer, C., Schleifenbaum, J.H.:
Influence of Powder Bed Temperature on Microstructure and Post Heat Treatment of High Speed Steel AISI M50 Processed by Laser Powder Bed Fusion.
Euro PM2018 Congress & Exhibition, 14-18 October 2018, Bilbao, Spain.
Euro PM2018 Congress Proceedings, AM Tool Steels, (6 S.), 2018

Lanfermann, A., Abels, P., Gomer, A., Schomburg, W.K.:
Qualitätsüberwachung von laserstrahlgeschweißten Tapes aus faserverstärkten Kunststoffen mittels Thermografie.
JOINING PLASTICS 12 (3/4), 160-165 (2018)

Lange, K., Hördemann, C., Schulz‐Ruhtenberg, M., Caro, J.:
Porous Nickel Nano‐Foam by Femtosecond Laser Structuring for Supercapacitor Application.
ChemElectroChem 5(23), 3688-3694, (2018)

Lange, R., Bachert, C., Rehmann, G., Weber, H., Luxen, R., Enns, M., Schenk, M., Hosdorf, S., Marfels, S., Bay, M., Kösters, A., Krause, V., Giesberts, M., Fitzau, O., Hoffmann, H.-D.:
Fully integrated Q-switch for commercial high-power resonator with solitary XLMA-fiber.
SPIE LASE, 27 Jan.-1 Feb. 2018, San Francisco, California, United States.
Proceedings Volume 10512, Fiber Lasers XV: Technology and Systems, 1051217, (7 S.), (2018)

Lewin, M., Baeumer, C., Gunkel, F., Schwedt, A., Gaussmann,F., Wueppen, J., Meuffels, P., Jungbluth, B., Mayer, J., Dittmann, R., Waser, R., Taubner, T.:
Nanospectroscopy of Infrared Phonon Resonance Enables Local Quantification of Electronic Properties in Doped SrTiO3 Ceramics.
ADVANCED FUNCTIONAL MATERIALS 28 (42), 1802834- (11S.) (2018)

Lihachev, A., Lihacova, I.,Heinrichs, H., Spigulis, J., Trebst, T., Wehner, M.:
Monitoring soft tissue coagulation by optical spectroscopy.
The Second International Conference "Biophotonics-Riga 2017", 27–29 August 2017 in Riga, Lativa.
Proc. of SPIE Vol. 10592, 105920D, (7 S.), (2018)

Maischner, D., Ross, I., Weisheit, A., Deschuyteneer, D., Petit, F., Schleifenbaum, J.H.:
Zweistufiges Laserstrahlbeschichten für Funktions- und Verschleißschutzschichten.
SCHWEIßEN UND SCHNEIDEN 70 (6), 384-389, (2018)

Masseling, L., Gayer, C.:
Micro-powder bed fusion (μ-PBF) - Extremely high resolution for small-scale applications.
2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, 22-25 July 2018, Berkeley, USA. Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing2018, 45-49 (2018)

Matthiesen, G., Merget, D., Rückert, M., Schmitz, K., Schleifenbaum, J.H.:
Additive manufacturing processes in fluid power – properties and opportunities demonstrated at a flow-optimized fitting.
HERVEX International Conference on Hydraulics and pneumatics, November 7-9, 2018, Baile Govora, Romania.
Proceedings of 2018 International Conference on Hydraulics and Pneumatics, 12-23 (2018)

Munk, A., Strotkamp, M., Walochnik, M., Jungbluth, B., Traub, M., Hoffmann, H.-D., Poprawe, R., Höffner, J., Lübken, F.-J.:
Diode-pumped Q-switched Alexandrite laser in single longitudinal mode operation with Watt-level output power.
OPTICS LETTERS 43 (22), 5492-5495 (2018)

Munk, A., Jungbluth, B., Strotkamp, M., Hoffmann, H.-D., Poprawe, R., Höffner, J.,
Lübken, F.-J.:
Diode-pumped Alexandrite ring laser in single-longitudinal mode operation for atmospheric lidar measurements.
OPTICS EXPRESS 26,14928-14935 (2018)

Nguyen, P., Fatherazi, P., Nippgen, S., Brosda, M., Olowinksy, A., Gillner, A.:
Investigations on energy deposition in polycarbonate by picosecond laser pulses for welding applications.
Procedia CIRP 74, 315-319 (2018)

Nguyen, N.-P., Brosda, M., Olowinsky, A., Gillner, A.:
Localised modifications inside polycarbonate and polyethylene terephthalate by using ultra short laser pulses for microwelding applications.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-033, (2018)

Nippgen, S., Gillner, A., Smolenko, A.:
Simulation of the dynamics of heat accumulation during in-volume modification with ultrashort laser pulses.
Procedia CIRP 74, 705-709 (2018)

Noll, R., Connemann, S., Fricke-Begemann, C., Schreckenberg, F., Ambrosch, R., Tori, A.:
Inverse Production Line for the Automated Dismantling of Mobile Phones with Selective Laser-based Detaching and Sorting of Valuable Components.
Berliner Recycling- und Rohstoffkonferenz, 19. und 20. März 2018, Berlin.
Thier, S.(Hrsg.), Thomé-Kozmiensky, E.(Hrsg.): Manuskriptband, 533-544, (2018)

Noll, R., Fricke-Begemann, C., Connemann, S., Meinhardt, C., Sturm, V.:
LIBS analyses for industrial applications – an overview of developments from 2014 to 2018.
J. Anal. Spectrom. 33(6), 945-956 (2018)

Nyga, S., Blass, D., Katzy,V., Westphalen, T., Jungbluth, B., Hoffmann, H.D.:
Fiber-coupled three-micron pulsed laser source for CFRP laser treatment.
SPIE LASE 2018, , 27 Jan.-1 Feb.2018, San Francisco, California.
Proc. SPIE 10511, Solid State Lasers XXVII: Technology and Devices, 105110G, (7 S.) (2018) 10511(2018)

Piller, F.T., Poprawe, R., Schleifenbaum, H.J., Schuh, G., S. Barg, S., Dölle, C., Hinke, C.,
Jank, M. H., Jiang, R., Meiners, W., Riesener. M., Schrage, J., Ziegler, S.:
Introducing a Holistic Profitability Model for Additive Manufacturing: An Analysis of Laser-powder Bed Fusion.
2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 16-19 Dec. 2018, Bangkok. 1730-1735 (2018)

Pirch, N., Niessen, M., Linnenbrink, S., Schopphoven, T., Gasser, A., Poprawe, R., Schöler, C., Arntz, D., Schulz, W.:
Temperature field and residual stress distribution for laser metal deposition.
JLA 30 (3), 32503- (5 S.), (2018)

Poprawe, R., Hinke, C., Meiners, W., Eibl, F., Zarei, O., Voshage, M., Ziegler,S., Schleifenbaum, J.H., Gasser, A., Schopphoven, T., Willenborg, E., Flemmer, J., Weingarten, C., Finger, J., Reininghaus, M.:
Digital photonic production along the lines of industry 4.0.
SPIE LASE, 2018, San Francisco, California, United States, 2 - 7 February 2018.
Proc. SPIE 10519, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII, 051907, (17 S.) (2018)

Poprawe, R., Brandt, M., Quick, N.R., Solis, B.H., Lu, Y.:
50 years of the Laser Institute of America.
Journal of Laser Applications 30(4), 41001- (2018)

Prochnau, M., Holzbrink, M., Wang, W., Holters, M., Stollenwerk, J., Loosen, P.:
Measurement methods to build up the digital optical twin.
SPIE LASE, 27 January-1 February 2018, San Francisco, California, United States.
Proceedings Volume 10513, Components and Packaging for Laser Systems IV; 105131I (10 S.) (2018).

Pütsch, O., Kelbassa, J., Stollenwerk, J., Gasser, A., Loosen, P.:
0Coaxial beam shaping for Laser materials processing.
LASER+PHOTONIK (1), 10-14 (2018)

Qin, Y., Wen, P., Chen, Y., Jauer, L., Voshage, M., Poprawe, R., Schleifenbaum, J.H.:
Biogredable Zn metal implants manufactured by laser powder bed fusion.
10th Symposium on Biodegradable Metals, 26-31 August, 2018, Oxord University, Oxford, England. eCM Online Periodical , 2018, Collection 6; 10th Biometal Conference Abstracts, S. 26 (2018)

Rittinghaus, S.-K., Hecht, U., Werner, V., Weisheit: A.:
Heat treatment of laser metal deposited TiAl TNM alloy.
Intermetallics 95 (4), 94-101 (2018)

Ross, I., Temmler, A., Küpper, M., Prünte, S., Teller, M., Schneider, J.M., Poprawe, R.:
Laser Polishing of Cold Work Steel AISI D2 for Dry Metal Forming Tools: Surface Homogenization, Refinement and Preparation for Self-Assembled Monolayers.
Key Engineering Materials 767, 69-76 (2018)

Saewe, J., Gayer, C., Jauer, L., Kunz, J., Broeckmann, C., Schleifenbaum, J.H.:
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steels.
Euro PM2018 Congress & Exhibition, Bilbao, Spain, 14-18 October 2018.
Euro PM2018 Congress Proceedings, Special Materials I, (6 S.), (2018)

Saewe, J., Gayer, C., Vogelpoth, A., Kunz, J.s, Broeckmann, C., Schleifenbaum, J.H.:
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Plate Preheating System.
MAMC 2018, Metal Additive Manufacturing Conference, 21-23. November 2018, Wien, Austria. (10 S.), (2018)

Schmithüsen, T., Bremen, S., Schleifenbaum, J.H.:
Automatable Support Removal and Surface Smoothing of Additive Manufactured Parts Made of AlSi10Mg.
The Fraunhofer Direct Digital Manufacturing Conference, March 14-15 2018, Berlin, Germany.
Müller, B. (Hrsg.): DDMC 2018 Conference Proceedings, (6 S.), (2018)

Schneider, F., Petring, D.:
CFRP is Demanding - Also on Laser Cutting.
LASER TECHNIK JOURNAL 15 (2), 61-65, (2018)

Schniedenharn, M., Schleifenbaum, J.H.:
On the Correlation of the Shielding Gas Flow in L-PBF Machines with Part Density.
DDMC-2018, Fraunhofer Direct Digital Manufacturing Conference, 14-15 March 2018 Berlin.
Müller, B. (Hrsg.): Fraunhofer Direct Digital Manufacturing Conference DDMC 2018 Proceedings, (7 S.) (2018)

Schniedenharn, M., Wiedemann, F., Schleifenbaum, J.H.:
Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry.
Rapid Prototyping Journal 24(8), 1296-1304, (2018)

Schniedenharn, M., Schleifenbaum, J.H.:
Position-dependent part quality of the L-PBF process resulting from the laser's angle of incidence.
Rapid.Tech + FabCon 3.D – International Trade Show + Conference for Additive Manufacturing Erfurt, Germany, 5 – 7 June 2018.
Proceedings of the 15th Rapid.Tech Conference, 198-216, (2018)

Spancken, D., van der Straeten, K., Beck, J., Stötzer, N:
Laser Structuring of Metal Surfaces for Hybrid Joints.
Lightweight Design 11(4), S. 17-21 (2018)

Streubel, R., Wilms, M.B., Doñate-Buendía, C., Weisheit, A., Barcikowski, S., Schleifenbaum, J.H., Gökce, B.:
Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition.
Japanese Journal of Applied Physics 57, 40310- (2018)

Sui, S., Zhong, C., Chen, J., Gasser, A., Huang, W., Schleifenbaum, J.H.:
Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition.
Alloys and Compounds 740 (2018), 389-399 (2018)

Teller, M., Ross, I., Temmler, A., Poprawe, R., Prünte, S., Schneider, J.M., Hirt, G.:
Investigation of Friction Conditions in Dry Metal Forming of Aluminum by Extended Conical Tube-Upsetting Tests.
Key Engineering Materials 767, 189-195 (2018)

Teller, M., Ross, I., Prünte, S., Temmler, A., Küpper, M., Poprawe, R., Schneider, J.M., Hirt, G.:
Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium.
5th International Conference on New Forming Technology ICNFT 2018, 18. Sept.- 21.Sept.2018, Bremen, Germany.
MATEC WEB of Conferences 190, 14010 (2018), (7 S.) (2018)

Thombansen, U., Buchholz, G., Frank, D., Heinisch, J., Kemper, M., Pullen, T., Reimer, V., Rotshteyen, G., Schwenzer, M., Stemmler, S., Abel, D., Gries, T., Hopmann, C., Klocke, F., Poprawe, R., Reisgen, U., Schmitt, R.:
Design framework for model-based self-optimizing manufacturing systems.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY – online first (10 S.) (2018)

Tian, C., Li, X., Zhang, S., Guo, G. Ziegler, S., Schleifenbaum, J.H., Wang, L., Rong, Y.:
Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM).
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, online first (2018)

Traub, M., Holly, C., Di Meo, A., Arntz, D,, Hesker, M., Hoffmann, D., Nebel, C., Poprawe, R.:
Diamond lenses enable ultra-compact and lightweight laser processing heads.
90th Laser Materials Processing Conference, 10.-11.12.2018, Japan. Proceedings of the 90th Laser Materials Processing Conference, 135-138, (2018)

Ünsal, I., Hama-Saleh, R., Sviridov, A., Bambach, M., Weisheit, A., Schleifenbaum, J.H.:
Mechanical Properties of Sheet Metal Components with Local Reinforcement Produced by Additive Manufacturing.
21st International ESAFORM Conference on Material Forming, ESAFORM 2018, 23 -25 April 2018 Palermo, Italy.
AIP Conference Proceedings 1960(1), 160028- (6 S.) (2018)

van der Straeten, K., Engelmann, C., Olowinsky, A., Gillner, A. :
Comparison of laser-based joining approaches for plastic-metal-hybrids - stength vs. process speed.
3. Internationale Konferenz Hybrid Materials and Structures, 18.-19. April 2018 Bremen, Germany.
Proceedings Hybrid Materials & Structures 2018, 203-208 (2018)

van der Straeten, K., Olowinsky, A., Gillner, A.:
Influence of Climatic Changes on the Joint Strength of Laser Joined Plastic-Metal-Hybrids.
Journal of Laser Micro/Nanoengineering 13(3), 287-291 (2018)

van der Straeten, K., Olowinsky, A., Gillner, A.:
Influence of climatic changes on the joint strength of laser joined plastic-metal-hybrids.
The 19th International Symposium on Laser Precision Microfabrication, Edinburgh, UK, 25-28 June, 2018.
Proceedings of LPM2018, #18-007, (4 S.), (2018)

van der Straeten, K., Olowinsky, A., Gillner, A.:
Laser-based plastic-metal-joining with self-organizing microstructures considering different load directions.
JLA 30 (3), 32401- (6 S.) (2018)

van der Straeten, K., Nottrodt, O., Zuric,M., Olowinksy, A., Abels, P., Gillner, A.:
Polygon scanning system for high-power, high-speed microstructuring.
Procedia CIRP 74, 491-494 (2018)

Vogelpoth, A., Sharma, S., Schleifenbaum, J.H.:
Development of Adapted Ni-738 Powder for Additive Manufacturing.
Euro PM2018 Congress & Exhibition, 14-18 October 2018, Bilbao, Spain.
Euro PM2018 Congress Proceedings, AM Special Materials I, (6 S.), (2018)

Vogt, S., Bechheim, L., Banik, J., Flaischerowitz, M., Weisheit, A., Schleifenbaum, J.H.:
Local laser softening of press-hardened steel at high feed rates.
JLA 30(3), 31201- (7 S.) (2018)

Völl, A., Vogt, S., Wester, R., Stollenwerk, S., Loosen, P.:
Application specific intensity distributions for laser materials processing: Tailoring the induced temperature profile.
OPTICS AND LASER TECHNOLOGY 108, 583-591 (2018)

Völl, A., Wester, R., Buske, P., Berens, M., Stollenwerk, J., Loosen, P.:
Free-form optics for non-idealized light sources in 3D: a phase-space approach.
SPIE Optical Systems Design, 14 - 17 May 2018, Frankfurt Germany. Proc. of SPIE 10693, Illumination optics V, 106930J, (7 S.), (2018)

Vossen, G., Friedlich, N.A., Hermanns, T., Nießen, M., Schulz, W.:
On a Model for Laser Cutting involving Surface Tension.
9th Vienna International Conference on Mathematical Modelling, Feb 21-23 2018 Vienna, Austria.
IFAC-PapersOnLine 15/2 (2018), 180-185, (2018)

Wehner, M., Betz, P., Aden, M.:
Influence of laser wavelength and beam profile on the coagulation depth in a soft tissue phantom model.
LASERS IN MEDICAL SCIENCE 33, (7 S.) (2018)

Weiler, T., Striet, P., Völl, A., Stollenwerk, J., Janssen, H., Emonts, M.:
Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement.
SPIE LASE, 27 January-1 February 20182018, San Francisco, California, United States.
Proceedings Volume 10523, Laser 3D Manufacturing V; 105230E (2018)

Weisheit, A.:
Neue LAM-Legierungen.
Konstruktion 4, IW10-IW13 (4 S.) (2018)

Wen, P., Jauer, L., Voshage, M., Chen, Y., Poprawe, R., Schleifenbaum, J.H.:
Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 258, 128-137 (2018)

Wen, P., Voshage, M., Jauer, L., Chen, Y., Qind, Y., Poprawe, R., Schleifenbaum, J.H.:
Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties.
Materials and Design 55, 36-45, (2018)

Wester, R., Völl, A., Berens, M., Stollenwerk, J., Peter Loosen, P.:
Solving the Monge-Ampère equation on triangle-meshes for use in optical freeform design.
SPIE Optical Systems Design, 2018, Frankfurt, Germany.
Proc. SPIE 10693, Illumination Optics V, 1069307, (6 S.), (2018)

Wilms, M.B., Streubel, R., Frömel, F., Weisheit, A., Tenkamp, J., Walther, F., Stephan Barcikowski, S., Schleifenbaum, J.H., Gökce, B.:
Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders.
Procedia CIRP 74, 196-200 (2018)

Wissinger, A., Rahn, H., Olowinsky, A.:
Untersuchungen zur Stabilität von scannerbasierten Lasterstrahlverfahren - Einfluss der thermischen Belastungen auf die Genauigkeit.
SCHWEIßEN UND SCHNEIDEN 69 (12), 830-837 (2018)

Zhang, H., Gu, D., Yang, J., Dai, D., Zhao, T., Hong, C., Gasser, A., Poprawe, R.:
Selective laser melting of rare earth element Sc modified aluminum alloy: Thermodynamics of precipitation behavior and its influence on mechanical properties.
Additive Manufacturing 23, 1-12 (2018)

Zhao, T., Cai, W., Dahmen, M., Schaible, J., Hong, C., Gasser, A., Weisheit, A., Biermann, T., Kelbassa, I., Zhang, H., Gu, D., Schleifenbaum, J.H.:
Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures.
Vacuum 158, 121-125 (2018)

Zhong, C., Chen, J., Gasser, A., Sui, S., Schleifenbaum, J.H.:
Microstructures, tensile properties, and fracture mechanisms of Inconel 718 formed by HDR-LMD with PREP and GA powders.
The International Journal of Advanced Manufacturing Technology 96 (5-8), 2031–2041 (2018)

Alkhayat, M., Gasser, A., Arntz, K., Klingbeil, N., Vollmer, T. :
Additive Fertigung "Vom Pulver zum Fertigteil".
In: Neugebauer, Reimund (Hrsg.): Ressourceneffizienz. Berlin, Heidelberg: Springer Vieweg, 151-152 (2017)

Anemone, G., Weingarten, C., Al Taleb, A., Prieto, C., Farías, D.:
Ultrasmooth metal thin films on curved fused silica by laser polishing.
Appl. Phy. Lett. 111(18), 181602 (4 S.) (2017)

Arntz, D., Petring, D., Jansen, U., Poprawe, R.:
Advanced trim-cut technique to visualize melt flow dynamics inside laser cutting kerfs. JLA. 29 (2), 22213 (9 S.) (2017)

Arntz, D., Petring, D., Stoyanov, S., Jansen, U., Schneider, F., Poprawe, R.:
In-situ-visualization of multiple reflections on the cut flank during laser cutting with 1 micron wavelength.
36th Int. Congr. on Applications of Lasers & Electro-Optics, ICALEO, Oct. 22—26, 2017, Atlanta, GA USA. Paper 603, (10 S.) (2017)

Bahrenberg, L., Danylyuk, S., Brose, S., Pollentier, I., Timmermans, M., Gallagher, E., Stollenwerk, J., Loosen, P.:
Characterization of pellicle membranes by lab-based spectroscopic reflectance and transmittance measurements in the extreme ultraviolet.
In: International Conference on Extreme Ultraviolet Lithography 2017, September 11 - 14, 2017, Monterey, CA. Proc. of SPIE Vol. 10450, 1-7 (2017)

Bahrenberg, L., Herbert, S., Mathmann, T., Danylyuk, S., Stollenwerk, J., Loosen, P.:
Design of structured YAG: Ce scintillators with enhanced outcoupling for image detection in the extreme ultraviolet.
Opt. Let. 42, 3848- (4 S.) (2017)

Bambach, M., Sviridov, A., Weisheit, A., Schleifenbaum, J.H.:
Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing.
Metals 7, 113 (14 S.) (2017)

Bambach, M., Sviridov, A., Weisheit, A.:
Stiffness management of sheet metal parts using laser metal deposition.
AIP Conference Proceedings 1896,080014 (2017)

Berger, L., Jauer, Ö., Bär, F., Faude, E., Schäublin, R., Schleifenbaum, J.H., Löffler, J.F.:
Microstructure and degradaton of WE43 bone scaffolds fabricted by selctive laser melting.
9th Symposium on Biodegradable Metals, 27 August-1 September, 2017, Bertinoro, Italy. eCM Meeting Abstracts 2017, Collection 4; Biometal, S. 30 (2017)

Bilandžić, M., Wollgarten, S., Stollenwerk, J., Poprawe, R., Esteves-Oliveira, M., Fischer, H.:
Glass-ceramic coating material for the CO₂-laserbased sintering of thin films as caries and erosionprotection.
DENTAL MATERIALS 33, 995- (8 S.) (2017)

Blass, D., Nyga, S., Katzy, V., Jungbluth, B., Hoffmann, H.-D.; Dilger, K.
CFRP Bonding pre-Treatment With Laser Radiation of 3 µm Wavelength: Influence of Different Treatment Parameters.
Lasers in Manufacturing Conference 2017. WLT/ LiM Lasers in Manufacturing 2017, München, 19.06.-22.06.2017. Proceedings of World of Photonics. (6 S.) (2017)

Bobzin, K., Hopmann, C.H, Gillner, A. ,Brögelmann, T.,  Kruppe, N.C., Orth, M., Steger, M., Naderi, M.:
Enhanced replication ratio of injection molded plastic parts by using an innovative combination of laser-structuring and PVD coating.
SURFACE & COATINGS TECHNOLOGY 332, (10 S.)(2017)

Boehr, S., Nolis, P., Brenner, A., Reininghaus, M., Lamß, M., Müller, B.:
Laserbasierte Fertigungstechniken und additive Fertigung.
Galvanotechnik 108, 1672-1677 (2017)

Bonhoff, T., Schniedenharn, M., Stollenwerk, J., Loosen, P.:
Experimental and theoretical analysis of thermo-optical effects in protective window for selective laser melting.
Lasers in Manufacturing LIM 2017, Munich, June 26-29 2017. (9 S.) (2017)

Bonhoff, T., Schniedenharn, M., Nippgen, S., Thombansen, U., Stollenwerk, J., Loosen, P., Poprawe, R.:
Multiphysikalische Analyse von optischen Systemen für die Lasermaterialbearbeitung.
35. CADFEM ANSYS Simulation Conference, Koblenz, 15.-17. Nov. 2017. (28 S.) (2017)

Brose, S., Danylyuk, S., Bahrenberg, L., Lebert, R., Loosen, P., Juschkin, L.:
Optimized phase-shifting masks for high-resolution resist patterning by interference lithography.
International Conference on Extreme Ultraviolet Lithography 2017, September 11 - 14, 2017, Monterey, CA. Proc. of SPIE Vol. 10450, (12 S.) (2017)

Bußmann, J., Odstrčil, M., Teramoto, Y., Juschkin, L.:
Ptychographic imaging with partially coherent plasma EUV sources.
Advanced Optical Technologies 6(6), 459-466 (2017)

Buyel, J.F., Gruchow, H.M., Wehner, M.:
A rapid laser probing method facilitates the non-invasive and contact-free determination of leaf thermal properties.
JOVE J. Vis. Exp. (119), 54835 (11 S.) (2017)

Dahmen, M., Lindner, S., Monfort, D., Petring, D.:
High-manganese steel dissimilar joints by laser beam welding – Metallurgy and properties.
Proceedings of the 5th International Conference on Steel in Cars and Trucks, June 18 - 22, 2017, Noordwijkerhout, Nederland, (9 S.) (2017)

Dai, D., Gu, D., Poprawe, R., Xia, M.:
Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material. Science Bulletin 62, 779-787 (2017)

Dai, D., Gu, D., Zhang, H., Xiong, J., Maa, C., Hong, C., Poprawe, R.:
Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts.
Opt. and Laser Techn. 99, 91-100 (2017)

Eibl, F., Tenbrock, C.,Pichler, T., Schmithüsen, T., Heussen, D., Schleifenbaum, J.H.:
Alternative beam sources and machine concepts for laser powder bed fusion.
2017 IEEE High Power Diode Lasers and Systems Conference (HPD), 11-12 Oct. 2017 Coventry, UK. High Power Diode Lasers and Systems Conference (HPD), 2017 IEEE, p. 7-8 (2017)

Elsen, F., Livrozet, M., Strotkamp, M., Wüppen, J., Jungbluth, B., Kasemann, R., Löhring, J., Meissner, A. Meyer, R., Hoffmann, D., Poprawe, R.:
Demonstration of a 100mJ OPO/OPA for Future Lidar Applications and LIDT Testing of Optical Components for MERLIN.
Solid State Lasers XXVI: Technology and Devices, San Francisco, California, United States 27 January - 1 February 2017. Proc. of SPIE Vol. 10082 (6 S.) (2017)

Elsen, F., Livrozet, M., Strotkamp, M., Wüppen, J., Jungbluth, B., Kasemann, R.,
Löhring, J., Meissner, A., Meyer, R., Hoffmann, D., Poprawe, R.:
Demonstration of a 100-mJ OPO/ OPA for future lidar applications and laser-induced damage threshold testing of optical components for MERLIN.
Optical Engineering 57, 21205- (2017)

Engelmann, C., van der Straeten, K., Heinicke, O.:
Lasertechnik ermöglicht klebstofffreie Hybridverbindungen im Spritzgussprozess.
Report Kunststoffland NRW 2017 (1), 8-9 (2017)

Engelmann, C., Oster, L., Olowinsky, A., Gillner, A., Mamuschkin, V., Arntz, D.:
Novel process for butt-joined plastic-metal hybrid compounds.
JLA. 29, (2), 022416 (5 S.) (2017)

Esteves-Oliveira, M., Wollgarten, S., Liebegall, S., Jansen, P., Bilandžić, M., Meyer-Lueckel, H., Fischer, H., Stollenwerk, J., Poprawe, R.:
A New Laser-Processing Strategy for Improving Enamel Erosion Resistance.
Journal of Dental Research 96, 1168-1175 (2017)

Francis, J.A., Gach, S., Olscho, S., Reisgen, U., Häusler, A., Gillner, A., Poprawe, R.:
Characterisation of quasi-stationary temperature fields in laser welding by infrared thermography.
Materials Science & Engineering Technology 48 (12), 1283-1289 (2017)

Gayer, C.:
Laser sintering moves into the medical market.
Industrial Photonics 4, 16-19 (2017)

Großmann, D., Reininghaus, M., Kalupka, C., Jenne, M., Kumkar, M.:
In-situ microscopy of front and rear side ablation processes in alkali aluminosilicate glass using ultra short pulsed laser radiation.
Opt. Exp. 25 (23), 28478- (11 S.) (2017)

Gretzki, P., Gillner, A.:
Programmable diffractive optic for multi-beam processing: applications and limitations.
SPIE Nanoscience + Engineering, Aug. 25 2017, San Diego, California.
Proc. of SPIE 10347, Optical Trapping and Optical Micromanipulation XIV, 103470V (13 S.) (2017)

Haase, C., Tang, F., Wilms, M. B., Weisheit, A., Hallstedt, B.:
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - towards rapid alloy screening and design.
Mat. Sci. Eng. A. (2017) http://dx.doi.org/10.1016/j.msea.2017.01.099

Häusler, A. , Mehlmann, B. , Olowinsky, A. , Gillner, A. , Poprawe, R.:
Efficient Copper Microwelding with Fibre Lasers using Spatial Power Modulation.
38th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, Taipei, Taiwan, MATADOR , 28.-30. 03 2015.
Lasers in engineering LIE 36(1/3), 133-146 (2017)

Häusler, A., Schürmann, A., Schöler, C., Olowinsky, A., Gillner, A., Poprawe, R.:
Quality improvement of copper welds by laser microwelding with the usage of spatial power modulation.
JLA 29 022422 (7 S.) (2017)

He, C., Steger, M., Gillner, A.:
Rapid nanostructuring using multi-beam-interference with consecutively overlapped ultrashort laser pulses.
LPM 2017. 18th International Symposium on Laser Precision Microfabrication June 5-8, 2017, Toyama Japan. Paper #17-28. (4 S.) (2017)

He, C., Bühring, J., Zibner, F., Gillner, A. :            
Ultrafast laser helical drilling of three-dimensional shaped holes using synchronized adaptation of energy deposition.
LPM 2017. 18th International Symposium on Laser Precision Microfabrication June 5-8, 2017, Toyama Japan. Paper #17-50. (5S.) (2017)

Heinen, P., Häusler, A., Mehlmann, B., Olowinsky, A.:
Laser beam microwelding of lithium-ion battery cells with copper connectors for electrical connections in energy storage devices.
Lasers Eng. 36 (1-3), 147-167 (2017)

Holters, M., Stollenwerk, J., Loosen, P.:
Ermittlung der Montagereihenfolge für Präzisionsoptiken.
118. DGaO (Deutsche Gesellschaft für angewandte Optik e. V.) Jahrestagung. 6.-10. Juni 2017 in Dresden.
DGaO-Proceedings 2017. B 31 (2 S.) (2017)

Hördemann, C., Fornaroli, C., Gillner, A.:
Ultrashort pulsed laser-dicing of silicon wafers for the decollating of conventional and hybrid solar cells.
SPIE Organic Photonics + Electronics, Aug. 06-10 2017, San Diego, California, United States.
Proc. of SPIE Vol. 10363, 103632Z ,(8 S.) (2017)

Hördemann, C.,  Anand, H., Gillner, A.:
Ultrashort pulsed laser ablation for decollation of solid state lithium-ion batteries.
SPIE Optical Engineering + Applications, 06-10 August 2017, San Diego, California,
United States. Proc. SPIE 10370, Reliability of Photovoltaic Cells, Modules, Components, and Systems X, 103700A (7 S.) (2017)

Jansen, U., Niessen, M., Hermanns, T., Arntz, D., Poprawe, R., Schulz, W.:
Boundary Layer Approximation for Melt Film Dynamics in Laser Fusion Cutting.
MODSIM2017, 22nd International Congress on Modelling and Simulation.
Modelling and Simulation Society of Australia and New Zealand, 3-8 December 2017, 326-332 (2017)

Jägle, E. A., Sheng, Z., Kürnsteiner, P., Ocylok, S., Weisheit, A., Raabe, D.: Comparison of Maraging Steel micro- and nanostructure produced conventionally and by Laser Additive Manufacturing.
Materials 10 (8), 1-15 (2017)

Jansen, U., Arntz, D., Petring, D., Schulz W., Poprawe, R.:
An automatable algorithm for measurement of fluid flow during laser fusion cutting using in-situ trim cut analysis.
Materials Science & Engineering Technology 48 (12), 1298-1303 (2017)

Jungbluth, B., Elsen, F., Wüppen, J., Nyga, S., Strotkamp, M., Hoffmann, D., Poprawe, R.,
High-power optical parametric frequency converters with addressable wavelengths in the IR.
Solid State Lasers XXVI: Technology and Devices, SPIE LASE, 2017, San Francisco, California, United States.
Proc. of SPIE Vol. 10082, 100820O (6 S.) (2017)

Kalupka, C., Großmann, D., Reininghaus, M. :
Evolution of energy deposition during glass cutting with pulsed femtosecond laser radiation.
Appl. Phys. A 123 (5), 376 (7 S.) (2017)

Knapp, W., Gillet, V., Courant, B., Aubignat, E., Costil, S., Langlade, C. :
Enhancement of low pressure cold sprayed copper coating adhesion by laser texturing on aluminium substrates.
Proc. SPIE 10097, 100970P (13 S.) (2017)

Kimm, M., Jauer, L., Hinke, C.,Schleifenbaum, J.H., Poprawe, R.:
Design of Flexible Implants for Preservation of Physiological Mobility exploiting Additive Manufacturing.
CAOS2017. 17th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, June 14–17, 2017, Aachen (Germany). EPiC Series in Health Science, S. 70-73 (2017) 1, 70-73 (2017)

Knoll, H., Ocylok, S., Weisheit, A., Springer, H., Jägle, E., Raabe, D.:
Combinatorial alloy design by laser additive manufacturing.
Steel Research Int. 87, 1-11 (2017)

König, G., Chen, C., Holters, M., Stollenwerk, J., Loosen, P.:
Comparison of Different Methods for Robustness Estimation of Simple Lens Systems.
OSA Optical Design and Fabrication Congress, IODC 2017, 09 - 13 July 2017, Denver, Colorado United States.Optics InfoBase Conference PapersVolume Part F51-IODC 2017, 2017, (2 S.) (2017)

Kumstel, J.:
Enhancement of the area rate for laser macro polishing.
WLT/LiM Lasers in Manufacturing Conference 2017.  Munich, June 26-29 2017.
Proceedings of World of Photonics, (8 S.)2017

Kürnsteiner, P., Wilms, M.B., Weisheit, A., Barriobero-Vila, P., Jägle, E., Raabe, D.:
Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition.
Acta Materialia 129, 52-60 (2017)

Lensing, R., Nottrodt, N., Wehner, M., Gillner, A.:
Laser Assisted Bioprinting (LAB) without sacrificial metal layer for contamination free assembly of cell cultures.
BMTMedPhys 2017 – Dresden, September 10–13. In: Biomed. Eng.-Biomed. Tech. 2017; 62(s1) 62, 42-45 (2017)

Lotfian, S., Rolink, G., Weisheit, A., Palm, M.:
Chemically graded Fe–Al/steel samples fabricated by laser metal deposition. MRS Advances 2(26), 1393-1398 (2017)

Luttmann, J., Klein, J. Plum, H.-D., Hoffmann, D., Hahn, S., Bode, M.:
FULAS: Design and test results of a novel laser platform for future LIDAR missions.
Solid State Lasers XXVI: Technology and Devices, San Francisco, California, United States, 28. Januar – 2. Februar 2017. Proc. SPIE Vol. 10082 (7 S.) (2017)

Mahler, G., Westphalen, T.:
Laserangeregte Thermografie von CFK-Bauteilen.
Thermographie-Kolloquium 2017, 28. – 29. September 2017 in Berlin. Beitrag 7, (8 S.) (2017)

Michalcová, A., Sencekova, L., Rolink, G., Weisheit, A., Pesicka, J., Stobik, M., Palm, M.:
Laser additive manufacturing of iron aluminides strengthened by ordering, borides or coherent Heusler phase.
Mat. Design 116, 481-494 (2017)

Müther, M., Kopp, A., Ptock, C., Jauer, L., Nabude, N., Bienert, M., Neuß-Stein, S., Lethaus, B., Schleifenbaum, J.H.:
Post-processing and plasma electrolytic oxidation coating of additive manufactured magnesium scafolds.
9th Symposium on Biodegradable Metals, 27 August-1 September, 2017, Bertinoro, Italy.
eCM Meeting Abstracts 2017, Collection 4; Biometal, S. 13 (2017)

Neumann, A., Giesberts, M., Witte, U., Fitzau, O., Hoffmann, H.-D.:
Analytical model for diode-to-fiber coupling and beam propagation in weakly guiding fibers.
Proc. IEEE High Power Diode Lasers & Systems (2017)

Nicklaus, K., Herding, M., Wang, X., Beller, N., Fitzau, O., Giesberts, M., Herper, M., Barwood, G.P., Williams, R.A., Gill, P.,
Koegel, H., Webster, S.A., Gohlke, M.:
High stability laser for next generation gravity missions.
International Conference on Space Optics (ICSO), 6-10 October 2014, Tenerife, Canary Islands, Spain.
Proceedings of SPIE Volume 10563, International Conference on Space Optics — ICSO 2014; 105632T (2017), (8 S.) (2017)

Nießen, M., Bürgermeister, L., Hambach, N.:
Hot or Cold Ablation – That’s the Question.
Laser Tech. J. 14 (3), 42-44 (2017)

Noll, R., Ambrosch, R., Bergmann, K., Britten, S., Brumm, H., Chmielarz, A., Connemann, S., Eschen, M., Frank, A., Fricke-Begemann, C., Gehlen, C., Gorewoda, T., Guolo, M., Kurylak, W., Makowe, J., Sellin, G., Siguier, M., Tori, M., Veglia, F:
Next generation urban mining - Automated ndisassembly, separation and recovery of valuable materials from electronic equipment: overview of R&D approaches and first results of the European project ADIR. European Metallurgical Conference – EMC 2017: Production and Recycling of Non-Ferrous Metals: Saving Resources for a Sustainable Future, June 25-28 2017, Leipzig, Germany. Proceedings European Metallurgical Conference EMC 2017, S. 799-8156 (2017)

Nottrodt, N., Hoffmann, A., Leonards, H., Kreuels, K., Wehner, M., Tobies, N., Pongratz, L.:
New stereolithographic resin providing functional surfaces for biocompatible 3D printing.
Journal of Tissue Engineering, 8 (9 S.) (2017)

Nottrodt, N., Hildmann, T., Lensing, R., Wehner, M.:
The influence of laser-induced-forward transfer on cell viability and growth.
Annual Meeting of the German Society for Biomaterials 2017 – Würzburg, November 09 – 11.
In: Biomed. Eng. - Biomed. Tech. 2017; 62(s2), 13-18 (2017)

Nüsser, C., Schneider, S.:
Influence of pulse duration and scanning direction on the deformation of edges during laser micro polishing.
Lasers in Manufacturing LIM 2017, Munich, June 26-29 2017, (102 S.) (2017)

Olschok, S., Reisgen, U., Gach, S., Arntz, D.:
Residual stress reduction in carbon manganese steels using low-transformation-temperature (LLT) filler materials – in situ diagnostics with digital image correlation.
36th Int. Congr. on Applications of Lasers & Electro-Optics, ICALEO, Oct. 22—26, 2017, Atlanta, GA USA. Paper 1001, (9 S.) (2017)

Opitz, M., Go, D., Lott, P., Müller, S., Stollenwerk, J., Kuehne, A., Roling, B.:
On the interplay of morphology and electronic conductivity of rotationally
spun carbon fiber mats. J. Appl. Phys. 122, 105104- (7 S.) (2017)

Pelegrina-Bonilla, G., Hermsdorf, J., Thombansen, U., Abels, P., Kaierle, S., Neumann, J.:
Methodology for assessing laser-based equipment.
Advanced Optical Technologies 6(5), (8 S.) (2017)

Pirch, N., Linnenbrink, S., Gasser, A., Wissenbach, K, Poprawe, R.:
Analysis of track formation during laser metal deposition.
J. Laser Appl. 29 (2) 22506 (5 S.) (2017)

Pirch, N., Schleifenbaum, H., Linnenbrink, S., Gasser, A., Poprawe, R., Niessen, M.:
Influence of process strategy on distortion and residual stresses for the powder based laser metal deposition process.
Materials Science & Engineering Technology 48 (12), 1304-1313 (2017)

Pirch, N., Niessen, M., Linnenbrink, S., Schopphoven, T., Gasser, A., Poprawe, R., Schöler, C., Arntz, D., Schulz, W.:
Temperature field and residual stress distribution for laser metal deposition.
36th Int. Congr. on Applications of Lasers & Electro-Optics, ICALEO, Oct. 22—26, 2017, Atlanta, GA USA. Paper 1202, (5 S.) 1-5 (2017)

Powell, J., Petring, D., Pocorni, J., Kaplan, A.:
LIA Guide to high power laser cutting. Orlando: Laser Institute of America (2017)

Poprawe, R., Hinke, C., Meiners, W., Schrage, J., Bremen, S., Risse, J., Merkt, S.:
Disruptive Innovation Through 3D Printing.
Richter, K., Walther, J. (Eds.): Supply Chain Integration Challenges in Commercial Aerospace, 73-87 (2017)

Poprawe, R., Bleck, W., Piller, F.T., Schuh, G., Barg, S., Bohl, A., Bremen, S., Bültmann, J., Hinke, C., Jiang, R., Kleer, R., Merkt, S., Prahl, U., Riesener, M., Schrage, J., Weller, C., Ziegler, S.:
Direct, mold-less production systems.
In: Brecher, C. Özdemir, D.(Eds.): Integrative Production Technology. Theory and Applications, S,. 23-111 (2017)

Prochnau, M., Stollenwerk, J., Loosen, P.:
Approach towards the Digital Optical Twin.
International Optical Design Conference 2017. Denver, Colorado United States 9–13 July 2017,  paper ITh3A.1 (2 S.) (2107)

Prochnau, M., Stollenwerk, J., Loosen, P.:
Approach towards the digital optical twin. International Optical Design Conference - IODC 2017,09-13 July 2017 Denver United States.
Proc. SPIE 10590, International Optical Design Conference 2017, 1059021, (6 S.) (2017)

Pustal, B., Vossel, T., Bührig-Polaczek, A., Arntz, D., Haeusler, A., Gillner, A., Poprawe, R., Schwedt, A., Mayer, J., Jansen, U., Schöler, C., Schulz, W.:
Modelling approach towards tailored grain structure in laser processing.
Materials Science & Engineering Technology 48 (12), 1226-1234 (2017)

Pütsch, O., Stollenwerk, J., Loosen, P.:
Integrated optical design for highly dynamic laser beam shaping with membrane deformable mirrors.
Proc. SPIE 10090, 1009010 (8 S.) (2017)

Pütsch, O., Kelbassa, J., Stollenwerk, J., Gasser, A., Loosen, P.:
Koaxiale Laserstrahlformung für die Lasermaterial-Bearbeitung mit Zusatzwerkstoff.
Photonik 2017, (3) 80-83 (2017)

Reimann, W., Pfriem, S., Hammer, T., Päthe, D., Ungers, M., Dilger, K.:
Influence of different zinc coatings on laser brazing of galvanized steel.
J. Materials Process. Technol. 239, 75-82 (2017)

Rodriguez-Araujo, J., Garcia-Diaz, A., Panadeiro, V., Knaak, C. :                 
Uncooled MWIR PbSe technology outperforms CMOS in RT closed-loop control and monitoring of laser processing.
Imaging and Applied Optics 2017 (3D, AIO, COSI, IS, MATH, pcAOP), 25 - 28 Jun 2017 Orlando, FL, United States.
OSA Techn. Digest (2017), Paper ATh2A.2. (3 S.) (2017)

Sakurai, H., He, C., Konishi, K., Tamaru, H., Yumoto, J., Kuwata-Gonokami, M., Gillner, A.:
Linking Energy Density with Morphology in Laser Grooving of Sapphire.
2017 European Conference on Lasers and Electro-Optics and European Quantum Electronics Conference, 25 June -29 June 2017 in Munich (ICM), Germany. Optics InfoBase Conference Papers, paper CM_P_19, (1S.) (2017)

Sändker, H., Stollenwerk, J., Loosen, P.,
Laser-based process for polymeric tribological coatings on lightweight components. SURFACE & COATINGS TECHNOLOGY 332, (8 S.) (2017)

Sändker, H., Stollenwerk, J., Loosen, P.:             
Laser-based Process for Polymeric Coatings on Temperature-Sensitive Metallic Components.
In: Lasers in Manufacturing Conference 2017. WLT/ LiM Lasers in Manufacturing 2017, München, 19.06.-22.06.2017. Proceedings of World of Photonics. 1-6 (2017)

Schimmel, G., Janicot, S., Hanna, M., Decker, J., Crump, P., Erbert, G., Witte, U., Traub, M., Georges, P., Lucas-Leclin, G.:
Coherent beam combining architectures for high power tapered laser arrays. In: High-Power Diode Laser Technology XV, San Francisco, California, United States, 28 January - 2 February 2017. Proc. SPIE 10086, (11 S.) (2017)

Schleifenbaum, J.H., Pichler, T., Hoppe, B.:
Kostenmodell für das Laserstrahlschmelzen. Kosten- und Leistungskennwerte für die additive Fertigung ermitteln und analysieren.
WT Werkstattstechnik 107(6), 432-438 (2017)

Schmithüsen, T., Eibl, F., Meiners, W.:
Untersuchungen zum automatisierten Entstützen SLM-gefertigter Bauteile.
RT ejournal - Forum für Rapid Technologie 2017 (14), 13 S. (2017)

Schöler, C., Nießen, M., Jansen, U., Schulz, W. :
A fast method for automated calibration of heat sources.
11. International Seminar ‘Numerical Analysis of Weldability’, Sept. 27 to 30, 2015, Schloss Seggau near Graz, Austria. In: Sommitsch, Christof [u.a.] (Hrsg.): Mathematical Modelling of Weld Phenomena 11. pp. 595-612 (2016)
ISBN 978-3-85125-490-7

Schopphoven, T., Gasser, A., Backes, G.:
EHLA: Extreme High-Speed Laser Material Deposition.
Economical and effective protection against corrosion and wear.
LASER TECHNIK JOURNAL 14(4), 26-29 (2017)

Schulte, J., Sartorius, T., Weitenberg, J., Vernaleken, A., Russbueldt, P.:
375 W, 37.5 µJ, <170 fs laser system utilizing nonlinear pulse compression in fused silica. Solid State Lasers XXVI: Technology and Devices, San Francisco, California, United States 27 January - 1 February 2017.
Proc. of SPIE Vol. 10082, 1008217 (2017)

Schulz, W., Hermanns, T., Al Khawli, T.:
Meta-Modeling, Visualization and Emulation of multi-dimensional Data for Virtual Production Intelligence.
International Conference of Numerical Analysis and Applied Mathematics 2016, ICNAAM 2016, 19 September through 25 September 2016 Rhodes, Greece.
AIP Conference Proceedings, 1863, 440003 (5 S.) (2017)

Schulz, W.:
Relevance of modeling laser-material interactions in the industrial context.  
CLEO: Applications and Technology, CLEO_AT 2017, San Jose, United States; 14 May 2017 through 19 May 2017. Optics InfoBase Conference Papers, ATu4C.1 (2 S.) (2017)

Spancken, D., van der Straeten, K., Beck, J., Hofmann, S., Büter, A.:
Lasertechnik für den Leichtbau - Materialhybride aus Kunststoff und Metall.
8. Landshuter Leichtbau Colloquium. Landshut, 8.3./9.3.2017. Tagungsband LLC 2017, 88-99 (2017)

Strotkamp, M., Elsen, F., Löhring, J., Traub, M., Hoffmann, D.:
Two stage Innoslab amplifier for energy scaling from 100 to >500 mJ for future lidar applications.
Appl. Opt. 56 (10), 2886-2892 (2017)

Sturm, V.,  Meinhardt, C., Fleige, R., Fricke-Begemann, C., Eisbach, J.:
Fast identification of steel bloom composition at a rolling mill by laser-induced breakdown spectroscopy.
SPECTROCHIMICA ACTA PART B: ATOMIC SPECTROSCOPY 136, 66-72 (2017)

Sun, M., Eppelt, U., Hartmann, C., Schulz, W., Zhu, J., Lin, Z.:
Towards crack-free ablation cutting of thin glass sheets with picosecond pulsed lasers Pacific Rim Laser Damage 2017: Optical Materials for High-Power Lasers, Shanghai, China, 21 - 24 May 2017.
Proceedings of SPIE. 10339 1-7 (2017)

Sui, S., Zhong, C., Chen, J., Gasser, A., Huang, W., Schleifenbaum, J.H.:                       
Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition.
Alloys and Compounds (740), 389-399 (2017)

Temmler, A., Roß, I., Cortina, M., Poprawe, R.:
Oberflächenfunktionalisierung des Werkstoffs 1.2379+ mittels Rand-schichtumschmelzen mit Laserstrahlung zur Entwicklung von ange-passten Oberflächentopographien für das schmiermittelfreie Kalt-fließpressen von Aluminium. Dry Metal Forming  3, 62-72 (2017)

Temmler, A., Küpper, M., Walochnik, M.A., Lanfermann, A., Schmickler, T., Bach, A., Greifenberg, T., Oreshkin, O., Willenborg, E., Wissenbach, K., Poprawe, R.:
Surface structuring by laser remelting of metals.
JLA 29, 012015 (12 S.) (2017)

Teller, M., Bambach, M., Hirt, G., Roß, I., Temmler, A., Poprawe, R., Bolvardi, H., Prünte, S., Schneider, J.M.:
Methodik zur Entwicklung von interaktionsminimierten Oberflächen-schichten für das schmiermittelfreie Kaltfließpressen von Aluminium.
Dry Metal Forming  3, 73-80 (2017)

Traub, M., Holly, C., Hoffmann, D., Widmann, C., Zuerbig, V., Nebel, C.:
Synthetic Mono-Crystalline Diamond Lenses for High Power Laser Materials Processing Applications.
OSA Optical Design and Fabrication Congress, IODC 2017, 09 - 13 July 2017, Denver, Colorado, United States.
Optics InfoBase Conference Papers Volume Part F56-OFT 2017, 2017, (3 S.) (2017)

van der Straeten, K., Olowinsky, A., Gillner, A.:
Laser-based plastic-metal-joining with self-organizing microstructures considering different load directions.
36th Int. Congr. on Applications of Lasers & Electro-Optics, ICALEO, Oct. 22—26, 2017, Atlanta, GA USA. Paper 1502 (6 S.) (2017)

van der Straeten, K., Wonschik, K.J., Olowinsky, A., Gillner, A.:
Self-organizing Microstructures on Aluminum for Joining with Fiber-reinforced Plastics.
IIW 2017. 70th International Conference. June, 25-30, Shanghai, P.R. China, E79-E84. (2017)

Vedder, C., Wollgarten, S., Gradmann, R., Stollenwerk, J., Wissenbach, K., Eberstein, M.:
Laser-based functionalization of electronic multi-material-layers for embedded sensors.
JLA 29, 22603- (2017)

Vieker, J., Bergmann, K.:
Influence of the electrode wear on the EUV generation of a discharge based extreme ultraviolet light source.
J. Phys. D: Appl. Phys. 50, 345601(8 S.) (2017)

Weingarten, C., Braun, K., Willenborg, E.:
Combination of Laser-based Process Steps for Optics Manufacturing.
Optical Design and Fabrication 2017 (Freeform, IODC, OFT) : Proceedings - OSA Washington, D.C., 2017. Paper OTu3B.6 (3 S.) (2017)

Weingarten, C., Uluz, E., Schmickler, A., Braun, K., Willenborg, E., Temmler, A., Heidrich, S.:
Glass processing with pulsed CO₂ laser radiation.
Appl. Opt. 56, (4), 777-783 (2017)

Weingarten, C., Steenhusen, S., Hermans, M., Willenborg, E., Schleifenbaum, J.H.:
Laser polishing and 2PP structuring of inside microfluidic channels in fused silica.
Microfluid Nanofluid 21(11), 165 (9 S.) (2017)

Weingarten, C., Schmickler, A., Willenborg, E., Wissenbach, K., Poprawe, R.:
Laser polishing and laser shape correction of optical glass.
J. Laser Appl. 29(1), 11702 (9 S.) (2017)

Weitenberg, J., Vernaleken, A., Schulte, J., Ozawa, A., Sartorius, T., Pervak, V., Hoffmann, H.-D., Udem, T., Russbüldt, P., Hänsch, T.W.:
Multi-pass-cell-based nonlinear pulse compression to 115 fs at 7.5 μJ pulse energy and 300 W average power.
OPTICS EXPRESS 25, 20502-20510 (2017)

Weitenberg, J., Saule, T., Schulte, J., Rußbüldt, P.:
Nonlinear Pulse Compression to Sub-40 fs at 4.5 μJ Pulse Energy by Multi-Pass-Cell Spectral Broadening.
IEEE JOURNAL OF QUANTUM ELECTRONICS 53, 8600204- (4 S.) (2017)

Wilms, M.B., Biermann, T., Rolink, G., Weisheit, A., Poprawe, R.:               
Growing of bulk sapphire single crystals using laser material deposition.
JLA 29 (2) 022013 (7 S.) (2017)

Witte, U., Traub, M.:               
Cost efficient diode laser beam source for sheet metal cutting.
Laser Techn. J. 14 (1), 36-39 (2017)

Witte, U., Schneider, F., Holly, C., Di Meo, A., Rubel, D., Boergmann, F., Traub, M., Hoffmann, D., Drovs, S., Brand, T., Unger, A.:
kW-class direct diode laser for sheet metal cutting based on commercial pump modules.
High-Power Diode Laser Technology XV, San Francisco, California, United States, 28. Januar – 2. Februar 2017. Proc. SPIE Vol. 10086 (13 S.) (2017)

Yesildag, N., Hopmann, C., Windeck, C., Bremen, S., Wissenbach, K., Merkt, S.:
Opportunities and challenges of profile extrusion dies produced by additive manufacturing processes.
32nd International Conference of the Polymer Processing Society, PPS 2016. Lyon, France; 25-29 July 2016, Code 132724. AIP Conf. Proc. 1914, 040002 (5 S.) (2017)

Zhong ,C., Pirch, N., Gasser, A., Poprawe, R., Schleifenbaum, J.H.:
The Influence of the Powder Stream on High-Deposition-Rate Laser Metal Deposition with Inconel 718.
Metals (7), 443 (13 S.) (2017)

Zielinski, J., Mindt, H.-W., Düchting, J., Schleifenbaum, J.H., Megahed, M.:
Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing.
JOM 63, (8 S.) (2017)
DOI: 10.1007/s11837-017-2596-z

Aden, M.:
Influence of the laser-beam distribution on the seam dimensions for laser-transmission welding: A simulative approach
Lasers Manuf. Mater. Process Online first (11 S.) (2016)

Baksh, P., Odstrcil, M., Kim, H., Boden, S. A., Card, R., Chad, J., Frey, J. G., Brocklesby, W.S.:
High resolution, wide field of view, ptychographic imaging of a biological sample using a high harmonic generation source
CLEO: Science and Innovations 2016. San Jose, California United States, 5–10 June 2016 (2 S.) (2016)

Baksh, P.D., Odstrčil, M., Kim, H.-S., Boden, S. A., Frey, J. G., Brocklesby, W.S.:
Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source
Opt. Lett. 41 (13), 1317-1320 (2016)

Baksh, P.D., Odstrčil, M., Kim, H.-S., Boden, S. A., Frey, J. G., Brocklesby, W.S.:
Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source: publisher’s note
Opt. Lett. 41 (13), 3057 (2016)

Bergmann, K., Vieker, J., von Wezyk, A.:
Investigations on the emission in the extreme ultraviolet of a pseudospark based discharge light source
J. Appl. Phys. 120, 143302 (5 S.) (2016)

Beyene, G. A., Tobin, I., Juschkin, L., Hayden, P., O'Sullivan, G., Sokell, E., Zakharov, V. S., Zakharov, S. V., O'Reilly, F.:
Laser-assisted vacuum arc extreme ultraviolet source: a comparison of picosecond and nanosecond laser triggering
J. Phys. D: Appl. Phys. 49, 225201 (10 S.) (2016)

Bobzin, K., Öte, M., Linke, T.F., Liao, X., Hopmann, C., Ochotta, P., Steger, M., Gillner, A.:
Development of a new production method for manufacturing of hybrid parts from metal and plastics
In: 18th Chemnitz Seminar on Materials Engineering, Chemnitz, 10 - 11 March 2016
Bristol: IOP Publishing, 2016 (IOP conference seriesMaterials science and engineering 118) p. 12 (2016)

Bonhoff, T., Gayer, C., Stollenwerk, J., Loosen, P.:
Simulation and measurement of thermo-optical effects in an f-theta lens at high laser power
DGaO-Proc. 117. Tagung (2 S.) (2016)

Brosda, M., Olowinsky, A., Pelzer, A.:
Laser Encapsulation of Organic Electronics with Adapted Diode Lasers in Flexible Production Processes
Physics Procedia 83, 218-224 (2016)

Brose, S., Danylyuk, S., Tempeler, J., Kim, Hyun-su, Loosen, P., Juschkin, L.:
Enabling laboratory EUV research with a compact exposure tool
Proc. SPIE 9776 (17 S.) (2016)

Bruening, S., Du, K., Gillner, A.:
Ultra-fast Micro Machining of Cylindrical Parts with Multiple Ultra- Short Pulsed Laser Sources
Physics Procedia 83, 167-181 (2016)

Buling, A., Sändker, H., Stollenwerk, J., Krupp, U., Hamann-Steinmeier, A.:
Laser Surface Pretreatment of 100Cr6 Bearing Steel - Hardening Effects and White Etching Zones
Applied Surface Science 378 (8 S.) 564-571 (2016)

Bürgermeister, L., Hermann, M., Fehér, K., Molano Lopez, C., Pich, A., Hannen, J., Vogt, F., Schulz, W.:
Modelling pH-optimized degradation of microgel-functionalized polyesters
J. Healthcare Eng. 2016 (8 S.) (2016)

Büsing, L., Bonhoff, T., Behnke, L., Stollenwerk, J., Loosen, P.:
Theoretical and experimental analysis of scan angle-depending pulse front tilt in optical systems for laser scanners
Adv. Opt. Techn. (online first) (7 S.) (2016)

Bußmann, J., Odstrcil, M., Bresenitz, R., Rudolf, D., Miao, J., Brocklesby, W.S., Juschkin, L.:
Coherent Diffractive Imaging with a Laboratory-Scale, Gas-Discharge Plasma Extreme Ultraviolet Light Source
Proceedings of the 14th International Conference on X-Ray Lasers. J. Rocca, C. Menoni, M. Marconi (Eds.), 275-280, Springer Proceedings in Physics 216 (2016)

Bußmann, J., Odstrcil, M., Bresenitz, R., Teramoto, Y., Juschkin, L.:
Ptychographic imaging with a tin plasma based EUV light source
JARA-FIT Annual Report 2015, 147-148 (2016)

Buyel, J. F., Gruchow, H. M., Tödter, N., Wehner, M.:
Determination of the thermal properties of leaves by non-invasive contact-free laser probing
J. Biotechnol. 217, 100-108 (2016)

Carstens, H., Högner, M., Saule, T., Holzberger, S., Lilienfein, N., Guggenmos, A, Jocher, C., Eidam, T., Esser, D., Tosa, V. , Pervak, V., Limpert, J., Tünnermann, A., Kleineberg, U., Krausz, F., Pupeza, I.:
High-harmonic generation at 250  MHz with photon energies exceeding 100  eV.
Optica 3 Nr. 4, 366-369 (2016)

Carstens, H., Högner, M., Saule, T., Holzberger, S., Lilienfein, N., Guggenmos, A., Jocher, C., Eidam, T., Esser, D., Tosa, V., Pervak, V., Limpert, J., Tünnermann A., Kleineberg, U., Krausz, F., Pupeza, I.:
Cavity-enhanced high-harmonic generation at 250 MHz
High Intensity Lasers and High Field Phenomena 2016.  Long Beach, California, United States, 20–22 March 2016. Paper HM6B.6. 2 S. (2016)

Dahmen, M., Gerhards, B., Lindner, S.:
Alloyed ultra-high strength steels
Laser Technik J. Nr. 2, 48-52 (2016)

Dahmen, M., Janzen, V., Lindner, S., Monfort, D., Wagener, R.:
Laserstrahlschweißen ultrahochfester Stähle - Stand und Perspektiven
DVS Congress - Große Schweißtechnische Tagung
Leipzig , Germany 19.09.2016 - 20.09.2016. pp. 221-230 (2016)

Dahmen, M., Göbel, M.:
Mechanical properties and fracture behaviour of LMD produced 2.4682 and wrought 2.4630 dissimilar welds
Physics Procedia  83, 426-436 (2016)

Dahmen, M., Lindner, S., Monfort, D., Petring, D.:
Weld metallurgy and mechanical properties of high manganese ultra-high strength steel dissimilar welds
Physics Procedia 83, 344-351 (2016)

de Kanter, M., Meyer-Kirschner, J., Viell, J., Mitsos, A., Kather, M., Pich, A., Janzen, C.:
Enabling the measurement of particle sizes in stirred colloidal suspensions by embedding dynamic light scattering into an automated probe head
Measurement 80, 92-98 (2016)

Engelmann, C., Eckstaedt, J., Olowinsky, A., Aden, M., Mamuschkin, V.:
Experimental and simulative investigations of laser assisted plastic-metal-joints considering different load directions
Physics Procedia  83, 1118-1129 (2016)

Engelmann, C., Oster, L., Olowinsky, A., Mamuschkin, V., Arntz, D.:
Novel process for Butt-joined plastic-metal hybrid compounds
35th Int. Congr. on Applications of Lasers & Electro-Optics, ICALEO, October 16-20, 2016, San Diego, US. 5 S. (2016)

Esteves Oliveira, M., Jansen, P., Wehner, M., Dohrn, A., Silva, M. S. Bello , de Paula Eduardo, C., Meyer-Lückel, H.:
Surface characterization and short-term adhesion to zirconia after ultra-short pulsed laser irradiation
J. Adhes. Dent., doi:10.3290/j.jad.a36918 (2016)

Fraugeron, M., Klein, S., Vilera, M., Kochem, G., Perez-Serrano, A., Krakowski, M., Traub, M.:
Laser module based on monolithically integrated MOPAs at 1.5 μm for space-borne lidar applications
ICSO 2016. International Conference on Space Optics. Biarritz, France, 18 - 21 October 2016. Paper 156 (8 S.) (2016)

Go, D., Lott, P., Stollenwerk, J., Thomas, H., Moeller, M., Kuehne, A. J. C.:
Laser carbonization of PAN-nanofiber mats with enhanced surface area and porosity
ACS Appl. Mater. Interfaces 8 (42), 28412-28417 (2016)

Gradmann, R., Seuthe, T., Vedder, C., Eberstein, M., Partsch, U.:
Adaption of functional ceramic materials for the laser sintering process in integrated sensor applications
IMAPS Additional Conferences (Device Packaging, HiTEC, HiTEN, & CICMT). May 2016, Vol. 2016, No. CICMT. pp. 000011-000017 (2016) https://doi.org/10.4071/2016CICMT-TA14

Grossmann, D., Reininghaus, M., Kalupka, C., Kumkar, M., Poprawe, R.:
Transverse pump-probe microscopy of moving breakdown, filamentation and self-organized absorption in alkali aluminosilicate glass using ultrashort pulse laser
Opt. Expr. 24, (20), 23221-23231 (2016)

Habschied, M., Dietrich, S., Heussen, D., Schulze, V. :
Performance and Properties of an Additive Manufactured Coil for Inductive Heat Treatment in the MHz Range
HTM J. Heat Treatm. Mat. 71, 212-217 (2016)

Hahn, S., Bode, M., Luttmann, J., Hoffmann, H.-D.:
FULAS: High Energy Laser Source for Future LIDARApplications
ICSO 2016. International Conference on Space Optics. Biarritz, France, 18 - 21 October 2016. Paper 23 (8 S.)  (2016)

Hambach, N., Hartmann, C., Keller, S., Gillner, A.:
High density perforation of thin Al-Foils with Ultra Short Pulse Lasers in dependence on the repetition rate
J. Laser Micro/Nanoeng, 11 (2), 192-198 (2016)

Hengesbach, S., Klein, S., Holly, C., Witte, U., Traub, M., Hoffmann, D.:
Simultaneous frequency stabilization and high-power dense wavelength division multiplexing (HP-DWDM) using an external cavity based on volume Bragg gratings (VBGs)
Proc. SPIE 9733 (15 S.) (2016)

Hengesbach, S., Klein, S., Traub, M., Witte, U.:
Simultaneous frequency stabilization, wavelength multiplexing and improvement of beam quality using a self-optimizing external cavity diode laser
Opt. Lett. 41 (3), 595-598 (2016)

Hermanns, T., Thombansen, U., Nießen, M., Jansen, U., Schulz, W. :
Modeling for self optimization in laser cutting
In: Handbook of Research on Computational Simulation and Modeling in Engineering. pp. 593-625 (2016). ISBN 978-1466688230

Holly, C., Traub, M., Hoffmann, D., Widmann, C., Brink, D., Nebel, C., Gotthardt, T., Sölzbir, M. C., Wenzel, C.:
Monocrystalline CVD-diamond optics for high-power laser applications
Proc. SPIE 9741, 974104 (2016)

Holters, M., Gatej, A., Haag, S., Müller, T., Loosen, P., Brecher, C.:
Approach for self-optimising assembly of optical systems
Int. J. Computer Integrated Manuf. Online first (11 S.) (2016)

Jägle, E. A., Sheng, Z., Wu, L., Lu, L., Risse, J., Weisheit, A., Raabe, D.:
Precipitation reactions in age-hardenable alloys during laser additive manufacturing
JOM (online first) January (7 S.) (2016)

Jauer, L., Meiners, W., Vervoort, S., Gayer, C., Zumdick, N. A. Zander, D.:
Selective Laser Melting of magnesium alloys
World PM2016 , Hamburg , Germany,  Oct 09-13, 2016

Kalupka, C., Finger, J., Reininghaus, M.:
Time-resolved investigations of the non-thermal ablation process of graphite induced by femtosecond laser pulses
J. Appl. Phys. 119, 153105 (5 S.) (2016)

Kim, H., Baksh, P., Odstrcil,M., Miszczak, M., Frey, J. G., Juschkin, L., Brocklesby, W. S.:
Lloyd's mirror interference lithography with EUV radiation from a high-harmonic source
Appl. Phys. Expr. 9, 7, 76701 (4 S.) (2016)

Kim, H., Danylyuk, S., Brocklesby, W. S., Juschkin, L.:
Single exposure imaging of Talbot carpets and resolution characterization of detectors for micro- and nano- patterns
J. Opt. Soc. Korea 20, (2) 245-250 (2016)

Kim, H., Danylyuk, S., Brose, S., Loosen, P., Bergmann, K., Brocklesby, W.S., Juschkin, L.:
Lensless proximity EUV lithography with a Xenon gas discharge plasma radiation
Proceedings of the 14th International Conference on X-Ray Lasers. J. Rocca, C. Menoni, M. Marconi (Eds.)
313-319, Springer Proceedings in Physics. 216 (2016)

Kim, H., Li, W., Marconi, M. C., Brocklesby, W. S., Juschkin, L.:
Restorative self-image of rough-line grids: Application to Coherent EUV Talbot lithography
IEEE Photonics J. 8 (3), 2600209 (9 S.) (2016)

Klocke, F., Poprawe, R., Schmitt, R., Gasser, A., Arntz, K., Grosse Böckmann, M., Klingbeil, N., Kerkhoff, J., Vollmer, T., Wegener, M., Alkhayat, M.:
Investigation and assessment of a laser addiditve manufacturing based process chain by the example of an injection mold
Proc. of the 3rd Fraunhofer Direct Digital Manufacturing Conference (DDMC16), Berlin, Germany, 16.-17.03.2016
ISBN: 978-3-8396-1001-5 (5 S.) (2016)

Klocke, F., Vollmer, T., Klingbeil, N., Wegener, M., Alkhayat, M., Lahl, M., Kluth, A. :
E3-Produktion: Ultrakurze Prozessketten bewerten und verbessern
ZWF – Zs. Wirtschaftl. Fabrikbetrieb 2016 (09), 527-530 (2016)

König, H.-G., Pütsch, O., Stollenwerk, J., Loosen, P.:
An improved approach for process monitoring in laser material processing
Proc. SPIE 9889, 98890T (6 S.)  (2016)

Kucirek, P., Meissner, A., Eiselt, P., Höfer, M., Hoffmann, D.:
A single-frequency double-pulse Ho:YLF laser for CO2-lidar
Proc. SPIE 9726, 97260 (6 S.) (2016)

Letzel, A., Maurer, E., Meixner, M., Poprawe, R., Stollenwerk, J., Hessner, S., Lehmann, K., Gökce, B., Barcikowski, S.:
Effect of various dispersing agents on the stability of silver microparticle dispersion and the formulation of uniform silver film by laser melting
J. Laser Appl. 28 (4), 1-7 (2016)

Löhring, J., Strotkamp, M., Elsen, F., Kasemann, R., Klein, J., Traub, M., Kochem, G., Meissner, A., Höfer, M., Hoffmann, D.:.:
Demonstration of a 500 mJ InnoSlab-amplifier for future LIDAR applications
Proc.  SPIE 97260, 97260M-1 (7 S.) (2016)

Löhring, J., Winzen, M., Faidel, H., Miesner, J., Plum, D., Klein, J., Fitzau, O., Giesberts, M., Brandenburg, W., Seidel, A., Schwanen, N., Riesters, D., Hengesbach, S., Hoffmann, H.-D.:
Key optical components for spaceborne lasers
Proc. SPIE 9730, 97300O-1 (11 S.), (2016)

Ma, C., Gu, D., Hong, C., He, B., Chang, K., Shi, Q.:
Formation mechanism and microstructural and mechanical properties of in-situ Ti–Ni-based composite coatings by laser metal deposition
Surf. & Coat. Technol. 291, 43-53 (2016)

Maryasov, O., Juschkin, L.:
Table-top EUV scatterometer MARYS with high-brightness discharge plasma source
JARA-FIT Annual Report 2015, 149-150 (2016)

Meineke, G., Hermans, M., Klos, J., Lenenbach, A., Noll, R.:
A microfluidic opto-caloric switch for sorting of particles by using 3D-hydrodynamic focusing based on SLE fabrication capabilities
Lab on a Chip (Online first) (9 S.) (2016)

Meinhardt, C., Sturm, V., Fleige, R., Fricke-Begemann, C., Noll, R.:
Laser-induced breakdown spectroscopy of scaled steel samples taken from continuous casting blooms
Spectrochim. Acta Part B, 123, 171-178 (2016)

Munk, A., Jungbluth, B., Strotkamp, M., Hoffmann, H.-D., Poprawe, R., Höffner, J.:
Diode-pumped Alexandrite ring laser for LIDAR applications
Proc. SPIE 9726, 97260I (6 S.) (2016)

Nottrodt, N., Khalil, N., Riester, D., Gillner, A., Wehner, M.:
Laser-Induced-Forward Transfer - a tool for cell sorting and printing
BioNanoMaterials 17 (S1), S176 (2016)

Petring, D.:
Virtual laser cutting simulation of real parameter optimization
Proc. of the 84th Laser Materials Processing Conference, 84th JLPS meeting, January 19-20, 2016, NagoyaI, ISBN 978-4-947684-85-1, 11-18 (2016)

Petring, D.:
Laser Beam Cutting – A Mature and Still Advancing Laser Application Becomes Calculable
In: CLEO: Applications and Technology 2016, San Jose, California United States, 5–10 June 2016. 2 S. (2016). ISBN 978-1-943580-11-8

Prochnau, M., Greger, D., Gatej, A., Stollenwerk, J., Loosen, P.:
Piezo-based, automated active alignment of laser resonators
DGaO-Proc. 117. Tagung (2 S.) (2016)

Pocorni, J., Petring, D., Powell, J., Deichsel, E., Kaplan, A. F. H.:
The effect of laser type and power on the efficiency of industrial cutting of mild and stainless steels
J. Manuf. Sci. Eng. 138 (3), 31012 (6 S.) (2016)

Pütsch, O., Stollenwerk, J., Loosen, P.:
Adaptive optical beam shaping for compensating projection-induced focus deformation
Adv. Opt. Technol. 5 (1), 71-79 (2016)

Rittinghaus, S.-K., Weisheit, A., Mathes, M., Garcia Vargas, W.:
Laser Metal Deposition of Titanium Aluminides – A Future Repair Technology for Jet Engine Blades?
Proceedings of the 13th World Conference on Titanium
Hoboken, N.J.: Wiley (2016) (6 S.) ISBN 978-1119283263

Russbueldt, P., Mans, T., Hoffmann, D., Schippel, S.:
High-average power ultrafast Yb: Innoslab amplifier. Ultrashort Pulse Laser Technology: Laser Sources and Applications
Eds.: Nolte, S.; Schrempel, F.; Dausinger, F., Cham [u.a.]: Springer (2016), 117-134

Schimmel, G., Doyen, I., Janicot, S., Hanna, M., Georges, P., Lucas-Leclin, G., Decker, J., Crump, P., Erbert, G.: Kaunga-Nyirenda, S., Moss, D., Bull, S., Larkins, E. C., Witte, U., Traub, M.:
High-power operation of coherently coupled tapered laser diodes in an external cavity
Proc. SPIE 9733 (11 S.) (2016)

Schmitz, C., Wilson, D., Rudolf, D., Wiemann, C., Plucinski, L., Riess, S., Schuck, M., Hardtdegen, H., Schneider, C. M., Tautz, F. S., Juschkin, L.:
Compact extreme ultraviolet source for laboratory-based photoemission spectromicroscopy
Appl. Phys. Lett. 108, 234101 (5 S.) (2016)

Schmitz, C., Wilson, D., Rudolf, D., Wiemann, C., Plucinski, L., Riess, S., Schuck, M., Hardtdegen, H., Schneider, C. M., Tautz, F. S., Juschkin, L.: Compact extreme ultraviolet source for laboratory-based photoemission spectromicroscopy
JARA-FIT Annual Report 2015, 151-152 (2016)

Schniedenharn, M., Liu, Q.:
Aufbauratensteigerung mittels High-Power Selective Laser Melting für den Werkstoff Ti6Al4V
Rapid.Tech – International Trade Show & Conference for Additive Manufacturing
Proceedings of the 13th Rapid.Tech Conference Erfurt, Germany, 14 – 16 June 2016
München: Hanser, pp. 36-48 (2016)

Schöler, C., Nießen, M., Jansen, U., Schulz, W. ,
A fast method for automated calibration of heat sources
11. International Seminar ‘Numerical Analysis of Weldability’, Sept. 27 to 30, 2015, Schloss Seggau near Graz, Austria. In: Sommitsch, Christof [u.a.] (Hrsg.): Mathematical Modelling of Weld Phenomena 11. pp. 595-612 (2016) ISBN 978-3-85125-490-7

Schopphoven, T., Gasser, A., Wissenbach, K., Poprawe, R.:
Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying
J. Laser Appl. 28, 022501 (9 S.)  (2016)

Schrage, J.:
Maschinenspezifische Kostentreiber bei der additiven Fertigung mittels Laser-Strahlschmelzen (LBM)
Rapid.Tech – International Trade Show & Conference for Additive Manufacturing
Proceedings of the 13th Rapid.Tech Conference Erfurt, Germany, 14 – 16 June 2016. München: Hanser, pp. 72-89 (2016)

Schulte, J., Sartorius, T., Weitenberg, J., Vernaleken, A., Russbueldt, P.:
Nonlinear pulse compression in a multi-pass cell
Opt. Lett. 41 (19), 4511-4514 (2016)

Sertsu, M. G., Giglia, A., Brose, S., Park, D., Wang, Z. S., Mayer, J., Juschkin, L., Nicolosi, P.:
Deposition and characterization of B4C/CeO2 multilayers at 6.x nm extreme ultraviolet wavelengths
J. Appl. Phys. 119, 095301 (7 S.) (2016)

Spancken, D., van der Straeten, K., Beck, J., Hofmann, S., Büter, A.:
Lasertechnik für den Leichtbau - Materialhybride aus Kunststoff und Metall
8. Landshuter Leichtbau Colloquium. Landshut, 8.3./9.3.2017. 1-11 (2017)

Springer, H., Baron, C., Szczepaniak, A., Jägle, E.A., Wilms, M. B., Weisheit, A., Raabe, D.:
Efficient additive manufacturing production of oxide- and nitride-dispersion-strengthened materials through atmospheric reactions in liquid metal deposition
Materials and Design 111, 60-69 (2016)

Strotkamp, M., Elsen, F., Löhring, J., Traub, M., Hoffmann, D. :
Two stage Innoslab amplifier for energy scaling from 100 to >500 mJ for future lidar applications
Appl. Opt. 56 (10), 2886-2892 (2017)

Sun, M., Eppelt, U., Hartmann, C., Schulz, W., Zhu, J., Lin, Z.:
Damage morphology and mechanism in ablation cutting of thin glass sheets with picosecond pulsed lasers
Opt. & Laser Technol. 80, 227-236 (2016)

Thombansen, U., Purrio, M., Buchholz, G., Hermanns, T., Molitor, T., Willms, K., Schulz, W., Reisgen, U.:
Determination of process variables in melt-based manufacturing processes
Int. J. Computer Integrated Manuf.  Online first (27 S.) (2016)

Trautz, M., Koj, C., Uchtmann, H.:
Load bearing behaviour of self-tapping screws in laser-drilled guideholes
World Conference on Timber Engineering (WCTE 2016)
August 22-25, 2016, Vienna, Austria. Wien: TU Verlag (2016). pp. 238-245

Uchtmann, H., He, C., Gillner, A.:
High precision and high aspect ratio laser drilling: challenges and solutions
Proc.  SPIE 9741 (12 S.)  (2016)

van der Straeten, K., Britten, S., Schneider, F., Janssen, S., Engelmann, C.:
Lasertechnik für industrielle Leichtbauanwendungen
Kunststoffe Nr 5, 34-38 (2016)

van der Straeten, K., Burkhardt, I, Olowinsky, A., Gillner, A.:
Laser-induced self-organizing microstructures on steel for joining with polymers
Physics Procedia  83, 1137-1144 (2016)

van der Straeten, K., Zibner, F., Olowinsky, A., Gillner, A.:
Laser-based joining of hybrid plastic-metal-components by increasing specific adhesion
In: 35th Int. Congr.on Applications of Lasers & Electro-Optics (ICALEO® 2016)
October 17-20, 2016. Online Proc. Paper 807. 6 S. (2016)

Vedder, C., Hawelka, D., Wolter, M., Leiva, D., Stollenwerk, J., Wissenbach, K.:
Laser-based drying of battery electrode layers
35th International Congress on Applications of Lasers & Electro-Optics , San Diago, Ca. , USA , ICALEO , Oct 16-20, 2016. pp. 501 (2016)

Vedder, C., Wollgarten, S., Gradmann, R., Stollenwerk, J., Wissenbach, K., Eberstein, M.:
Laser-based functionalization of electronic multi-material-layers for embedded sensors
35th International Congress on Applications of Lasers & Electro-Optics , San Diago, Ca. , USA , ICALEO , Oct 16-20, 2016. pp. 2104 (2016)

Völl, A., Stollenwerk, J., Loosen, P.:
Computing specific intensity distributions for laser material processing by solving an inverse heat conduction problem
Proc. SPIE 9741 (9 S.) (2016)

Wang, X., Liu, H., Juschkin, L., Li, Y., Xu, Y., Quan, X. Lu, Z.:
Freeform lens collimating spectrum-folded Hadamard transform near-infrared spectrometer
Opt. Comm. 380, 161-167 (2016)

Witte, U., Traub, M., Di Meo, A., Hamann, M., Rubel, D., Hengesbach, S., Hoffmann, D.:
Compact 35μm fiber coupled diode laser module based on dense wavelength division multiplexing of NBA mini-bars
Proc. SPIE 9733 (12 S.) (2016)

Witte, U., Schneider, F., Traub, M., Hoffmann, D., Drovs, S., Brand, T., Unger, A.:
kW-class direct diode laser for sheet metal cutting based on DWDM of pump modules by use of ultra-steep dielectric filters
Opt. Expr. 24 (20), 22917-22929 (2016)

Witte, F., Jauer, L., Meiners, W., Kronbach, Z., Strohschein, K., Schmidt T.:
Open-porous biodegradable magnesium scaffolds produced by selective laser melting for individualized bone replacement. Frontiers in  Bioengineering and Biotechnology
Conference Abstract: 10th World Biomaterials Congress
Montréal, Canada, 17 May - 22 May, 2016. 1 S. (2016)
Doi: 10.3389/conf.FBIOE.2016.01.00708

Wueppen, J., Nyga, S., Jungbluth, B., Hoffmann, D.:
195  μm-pumped OP-GaAs optical parametric oscillator with 106  μm idler wavelength
Opt. Lett. 41 (18), 4225-4228 (2016)

Wueppen, J., Strotkamp, M., Hoffmann, D., Russbueldt, P., Mans, T., Fritzler, S., Schippel, S.:
Laser-triggered electron source for x-ray applications
Ultrashort Pulse Laser Technology: Laser Sources and Applications
Eds.: Nolte, S.; Schrempel, F.; Dausinger, F., Cham [u.a.]: Springer (2016), 337-349

Zhong, C., Chen, J., Linnenbrink, S., Gasser, A., Sui, S., Poprawe, R.:
A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
Materials Design 107, 386-392 (2016)

Zhong, C., Gasser, A., Kittel, J., Wissenbach, K., Poprawe, R.:
Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition
Materials Design 98, 128-134 (2016)

Zhong, C., Gasser, A., Kittel, J., Fu, J., Ding, Y., Poprawe, R.:
Microstructures and tensile properties of Inconel 718 formed by high deposition-rate laser metal deposition
J. Laser Appl. 28, 22010 (8 S.) (2016)

Zumdick, N. A., Jauer, L., Kersting, L. C., Meiners, W., Kutz, T. N., Zander, D.:
Microstructure and properties of WE43 manufactured via SLM. Europ
Cells Mater. 32, Suppl. 6, 6 (2016)

Aden, M., Mamuschkin, V., Olowinsky, A.:
Influence of carbon black and indium tin oxide absorber particles on laser transmission welding
Opt. Laser Technol. 69, 87-91 (2015)

Bahrenberg, L., Herbert, S., Tempeler, J., Maryasov, A., Hofmann, O., Danylyuk, S., Lebert, R., Loosen, P., Juschkin, L.:
Analysis of distinct scattering of extreme ultraviolet phase and amplitude multilayer defects with an actinic dark-field microscope
Proceedings of SPIE 9422 (9 S.) (2015)

Blattmann, V., Trusheim, D.:
Hybrid laser-etching-process for wafer texturing
Energy Procedia 77, 766-773 (2015)

Blattmann, V., Trusheim, D.:
Progress on silicon wafer texturing by hybrid laser-etching-process
31st EU PVSEC. Hamburg, Germany, 14-18 September 2015. pp. 921-925 (2015)

Bonhoff, T., Büsing, L., Stollenwerk, J., Loosen, P.:
Modeling of optical aberrations due to thermal deformation using finite element analysis and ray-tracing
Proc. SPIE 9626, 96261V (10 S.) (2015)

Britten, S. W., Fiedler, W., Olowinsky, A., Gillner, A.:
Extension of the process boundaries for the soldering of elongated interconnectors with a simultaneous energy deposition
Journal of Laser Applications 27 (S2), 22005 (2015)

Britten, S., Wein, S., Olowinsky, A., Gillner, A.:
Laser impulse metal bonding with temporal power modulation
PCIM Europe 2015, Nürnberg, May 19 – 21 (7 S.) (2015)

Britten, S. W., Wang, A. Y.-T., Olowinsky, A., Gillner, A.:
Measurement of the vapor plume velocity in Laser Impulse Metal Bonding with temporal power modulation
LAMP 2015 – the 7th International Congress on Laser Advanced Materials Processing, Kitakyushu, Fukuoka, Japan, (7 S.) (2015)

Brosda, M., Mamuschkin, V., Olowinsky, A.:
Laserwelding of transparent polymer films
LIM 2015 Lasers in Manufacturing, Munich, June 22-25, (5. S.) (2015)

Bültmann, J., Merkt, S., Hammer, C., Hinke, C., Prahl, U.:
Scalability of the mechanical properties of selective laser melting produced micro-struts
Journal of Laser Applications 27 (S2), S29206 (8 S.) (2015)

Bußmann, J., Odstrcil, M., Bresenitz, R., Rudolf, D., Miao, J., Brocklesby, W. S., Grützmacher, D., Juschkin, L.:
Employing partially coherent, compact gas-discharge sources for coherent diffractive imaging with extreme ultraviolet light
Proc. SPIE 9589, 95890L (8 S.) (2015)

Cosson, B., Deléglise, M., Knapp, W.:
Numerical analysis of thermoplastic composites laser welding using ray tracing method
Composites Part B 68, 85-91 (2015)

Dahmen, M., Janzen, V., Lindner, S., Wagener, R.:
Mechanical properties of laser beam welded ultra-high strength chromium steel with martensitic microstructure
Phys. Proced. 78, 210-221 (2015)

Dahmen, M., Janzen, V., Lindner, S., Wagener, R.:
Untersuchung zum Schmelzschweissen höchstfester nichtrostender Stähle mit martensitischem Gefüge mittels Laserstrahl- und MAG-Schweissen
IGF-Vorhaben 17433 N der FOSTA – Forschungsvereinigung Stahlanwendung e.V., Düsseldorf
Forschung für die Praxis P 905. 107 S. (2015)

Dahmen, M., Rajendran, K. D., Lindner, S.:
Sensitization of laser-beam welded martensitic stainless steels
Phys. Proced. 78, 240-246 (2015)

Danylyuk, S., Herbert, S., Loosen, P., Lebert, R., Schäfer, A., Schubert, J., Tryus, M., Juschkin, L.:
Multi-angle spectroscopic extreme ultraviolet reflectometry for analysis of thin films and interfaces
Phys. Stat. Sol. C 12 (3), 318-322 (2015)

Decker, J., Crump, P., Fricke, J., Maabdorf, A., Traub, M., Witte, U., Brand, T., Unger, A., Erbert, G., Trankle, G.:
25-W Monolithic Spectrally Stabilized 975-nm Minibars for Dense Spectral Beam Combining
IEEE Photon. Technol. Lett. 27 (15), 1675-1678 (2015)

Donges, A., Noll, R.:
Laser Measurement Technology
Heidelberg [u.a.]: Springer 2015,
Springer Series in Optical Sciences,
Vol. 188. ISBN 978-3662436332

Engelhardt, S., Tempeler, J., Wehner, M.:
The voxel onset time as an in situ method to evaluate focal position effects on two-photon-induced lithography
Appl. Phys. A (Online first) (6 S.) (2015)

Engelmann, C., Eckstädt, J., Olowinsky, A., Aden, M., Mamuschkin, V.:
Examination of the bond strength of laser assisted plastic-metal-joints considering different load directions
LAMP 2015 – the 7th International Congress on Laser Advanced Materials Processing, Kitakyushu, Fukuoka, Japan,(6 S.) (2015)

Engelmann, C., van der Straeten, K., Mamuschkin, V., Olowinsky, A.:
Laserbasierte Fügeverfahren für faserverstärkte Kunststoffe
Große Schweißtechnische Tagung, DVS Congress,
Nürnberg 14.-17. September 2015. 1-5 (2015)

Engelmann, C., Meier, D., Olowinsky, A., Kielwasser, M.:
Metal meets composite - hybrid joining for automotive applications
LIM 2015 - Lasers in Manufacturing, Munich, June 22-25 (10 S.) (2015)

Eppelt, U., Al Khawli, T.:
Metamodeling of laser cutting
AIP Conference Proceedings 1648, S. 710002 (2015)

Esser, D., Staasmeyer, J.-H., Weitenberg, J., Rußbüldt, T., Sartorius, T., Hoffmann, H.-D.:
Fused-silica mirror substrates with laser-microstructured openings with reduced chipping
CLEO_Europe 2015. 21-25 June 2015 in Munich. CE_10_3. (2015)

Faugeron, M., Vilera, M., Krakowski, M., Robert, Y., Vinet, E., Primiani, P., Le Goec, J.-P., Parillaud, O., Pérez-Serrano, A., Tijero, J. M. G., Kochem, G., Traub, M., Esquivias, I., van Dijk, F.:
High power three-section integrated Master Oscillator Power Amplifier at 1.5 µm
IEEE Photon. Technol. Lett. 27 (13), 1449-1452 (2015)

Finger, J., Kalupka C., Reininghaus, M.:
High power ultra-short pulse laser ablation of IN718 using high repetition rates
J. Materials Processing Technol. 226 (Dec.), 221-227 (2015)

Fitzau, O.:
Polarized fiber lasers and amplifiers
Springer Series in Optical Sciences. Vol. 189, 251-263 (2015)

Fix, A., Amediek, A., Büdenbender, C., Ehret, G., Quatrevalet, M., Wirth, M., Löhring, J., Kasemann, R., Klein, J., Hoffmann, H.-D., Klein, V.:
Development and first results of a new Near-IR Airborne Greenhouse Gas Lidar
Advanced Solid State Lasers Conference 2015. Berlin, Germany, October 4-9, 2015
(3 S.) (2015)

Flemmer, J., Pirch, N., Drinck, F.:
LMDCAM2: Software Tool for Near-Net Repair, Cladding and Built-Up by Laser Metal Deposition
10th ASME 2015 Manufacturing Science and Engineering Conference (MSEC2015). Charlotte, North Carolina, June 8-12, 2015. Vol. 1: Processing. ISBN: 978-0-7918-5682-6. 5 S. (2015)

Flemmer, J., Ross, I., Willenborg, E., Fröba, H.:
Machine Tool and CAM-NC Data Chain for Laser Polishing Complex Shaped Parts
Advanced Engineering Materials 17, 260-267 (2015)

Flemmer, J., Willenborg, E.:
Simultaneous 9-Axis-Laser-Processing
10th ASME 2015 Manufacturing Science and Engineering Conference (MSEC2015)
Charlotte, North Carolina, June 8-12, 2015. Vol. 1: Processing (6 S.) (2015)

Fornaroli, C., Holtkamp, J., Gillner, A.:
Dicing of thin silicon wafers with ultra-short pulsed lasers in the range from 200 fs up to 10 ps
J. Laser Micro/Nanoeng. 10 (2), 229-233 (2015)

Gebhardt, S., Pick, S. , Voet, H. , Utsch, J. , al Khawli, T. , Eppelt, U. , Reinhard, R. , Buscher, C. , Hentschel, B. , Kuhlen, T.W.:
flapAssist: How the integration of VR and visualization tools fosters the factory planning process
Virtual Reality (VR), 2015, 23-27 March 2015.  IEEE Proceedings, pp. 181-182 (2015)

Heidrich, S., Weingarten, C., Uluz, E., Poprawe, R.:
Glass processing with high power q-switch CO₂ laser radiation
LIM 2015 Lasers in Manufacturing, Munich, June 22-25, (8 S.) (2015)

Heidrich, S., Willenborg, E., Weingarten, C., Temmler, A.:
Laser polishing and laser form correction of fused silica optics
Mat. Sci. Eng. Technol. 46 (7), 668-674 (2015)

Hengesbach, S., Poprawe, R., Hoffmann, D., Traub, M., Schwarz, T., Holly, C., Eibl., F., Weisheit, A., Vogt, S., Britten, S., Ungers, M., Thombansen, U., Engelmann, C., Mamuschkin, V., Lott, P.:
Brightness and average power as driver for advancements in diode lasers and their applications
Proc. SPIE 9348, 93480B (18 S.) (2015)

Herbert, S., Bahrenberg, L., Maryasov, A., Danylyuk, S., Loosen, P., Juschkin, L., Bergmann, K., Lebert, R.:
Table-Top EUV and Soft X-Ray Microscopy
Imaging & Microsc. 2015 (May 26), 3 S. (2015)

Hermanns, T., Thombansen, U., Stoyanov, S.:
Modelling for self-optimization in laser cutting
AIP Conference Proceedings 1648, 710003  (2015)

Hirt, G., Bambach, M., Bleck, W., Prahl, U., Stollenwerk, J.:
The development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts
Advances in Production Technology. Ed.: C. Brecher. Lecture Notes in Production Engineering, 117-129 (2015)

Hong, C., Gu, D., Dai, D., Cao, S., Alkhayat, M., Qingbo, J., Gasser, A., Weisheit, A., Kelbassa, I., Zhong, M., Poprawe, R.:
High-temperature oxidation performance and its mechanism of TiC/Inconel 625 composites prepared by laser metal deposition additive manufacturing
Journal of Laser Applications 27 (1), S17005 (11 S.) (2015)

Hong, C., Gu, D., Dai, D., Alkhayat, M., Urban, W., Yuan, P., Cao, S., Gasser, A., Weisheit, A., Kelbassa, I., Zhong, M., Poprawe, R.:
Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts : Tailored microstructures and enhanced performance
Materials Science and Engineering A 635, 118-128 (2015)

Hopmann, C., Böttcher, A., Riedel, R., Beste, C., Engelmann, C., van der Straeten, K., Schneider, F.:
Neue Gestaltungsmöglichkeiten thermoplastischer FVK-Leichtbauteile
Lightweight Design Nr. 3, 40-47 (2015)

Hopmann, C., Yesildag, N., Bremen, S., Wissenbach, K., Merkt, S.: Surface quality of profile extrusion dies manufactured by Selective Laser Melting
RT ejournal - Forum für Rapid Technologie Nr. 12,4290 (15 S.) (2015)

Janssen, S., Reinelt, S., Kelbassa, I., Oppitz, S., Cetin, M.:
Comparison between PS and µS-laser radiation for drilling holes for force transmission elements in CFRP-preforms
ICALEO 2015 - International Congress on Applications of Lasers & Electro-Optics, October 18-22, 2015, Atlanta, Ga., USA, Paper 1701 (10 S.) (2015)

Janssen, S., Fögen, N., Kelbassa, I., Cetin, M.: Oppitz, S.:
Drilling of holes for force transmission elements in CFRP-preforms via ultra-short pulse laser radiation
LAMP 2015 – the 7th International Congress on Laser Advanced Materials Processing, Kitakyushu, Fukuoka, Japan, (7 S.) (2015)

Janzen, V., Meschut, G., Dahmen, M., Poprawe, R., Lindner, S., Wagener, R., Melz, T.:
Investigation on joint characteristics of laser beam welded press hardenable ultra-high strength steels with ferritic-martensitic and martensitic microstructure
Welding in the World (Online First) (10 S.) (2015)

Jauer, L., Jülich, B., Meiners, W., Voshage, M.,:
Selective Laser Melting of Magnesium Alloys
European Cells and Materials, Vol. 30, Suppl. 3 (2015)

Jungbluth, B., Elsen, F., Strotkamp, M., Wüppen, J., Hoffmann, D.:
Gepulste Hochleistungslaser mit adressierbarer Wellenlänge im IR
Photonik Nr 6, 34-37 (2015)

Juschkin, L., Lötgering, L., Rudolf, D., Xu, R., Brose, S., Danylyuk, S., Miao, J.:
Tabletop coherent diffraction imaging with a discharge plasma EUV source
Proc. SPIE 8849, 88490Y (9 S.) (2013)

Kim, H., Li, W., Danylyuk, S., Brocklesby, W. S., Marconi, M. C., Juschkin, L.:
Optical properties of 2D fractional Talbot patterns under coherent EUV illumination
J. Phys. D: Appl. Phys. 48, 375101 (7 S.) (2015)

Kittel, J., Gasser, A., Poprawe, R., Richter, K. H.:
Advanced method for manufacturing hybrid nickel based components by combining Single Crystal (SX) subcomponents with PolyCrystalline (PX) structures generated by Laser Metal Deposition (LMD)
ICALEO International Congress on Applications of Lasers & Electro–Optics, Atlanta, GA, USA, October 18-22, 2015, Paper 1301 (6 S.) (2015)

Klein, S., Hengesbach, S., Traub, M., Hoffmann, D.:
Frequency stabilisation of single emitters and the effect on the beam quality
Proceedings 2015 IEEE High Power Diode Lasers and Systems Conference (HPD)  2015. pp. 13-14 (2015)

Klein, S., Hengesbach, S., Westphalen, T., Traub, M., Hoffmann, D.:
Suppression of cross coupling in an external resonator for a diode laser bar with 19 single emitters
Optics Letters 40, 641-644 (2015)

Klocke, F., Schmitt, R., Arntz, K., Grosse Böckmann, M., Gasser, A., Alkhayat, M., Kerkhoff, J., Klingbeil, N., Vollmer, T., Wegener, M.:
Investigation and Assessment of Resource Consumption of Process Chains
Procedia CIRP 38, 234-238 (2015)

Kumstel, J.:
Polieren von SLM-Bauteilen mit kontinuierlicher Laserstrahlung
In: Neue Entwicklungen in der Additiven Fertigung, Berlin, Heidelberg: Springer 2015, 143-157,
ISBN 978-3-662-48472-2 (2015)

Kumstel, J., Flemmer, J., Temmler, A.:
Laser polishing of metallic freeform surfaces
Proc. of the 4M/ICOMM2015 Conference, Ed. by M. Annoni [u.a.]. Singapore: Research Publishing (2015)
ISBN 978-981-09-4609-8. pp. 352-355

Kumstel, J., Biermann, M.:
Polieren von SLM-Bauteilen mit kontinuierlicher Laserstrahlung Proceedings RapidTech 2015, Fachforum "Wissenschaft",
Erfurt: Desotron Verl. (14 S.)(2015) ISBN 978-3932875403.

Kunkemöller, G., Maß, T. W. W., Michel, A.-K. U., Kim, H.-S., Brose, S., Danylyuk, S., Taubner, T., Juschkin, L.:
Extreme ultraviolet proximity lithography for fast, flexible and parallel fabrication of infrared antennas
Opt. Expr. 23 (20), 25487-25495 (2015)

Li, P., Lewin, M., Kretinin, A.V. , Caldwell, J. D., Novoselov, K. S. , Taniguchi, T., Watanabe, K., Gaussmann, F., Taubner, T.:
Hyperbolic phonon-polaritons in boron nitride for near-field optical imaging and focusing
Nature Communications 6, 7507 (9 S.) (2015)

Loetgering, L., Hammoud, R., Juschkin, L., Wilhein, T.:
A phase retrieval algorithm based on three-dimensionally translated diffraction patterns
Epl Europhys. Lett. 111, 64002 (5 S.) (2015)

Mamuschkin, V., Engelmann, C., Aden, M., Olowinsky, A.:
Comparison of different irradiation methods in absorber-free laser transmission welding
LAMP 2015 – the 7th International Congress on Laser Advanced Materials Processing. Kitakyushu, Fukuoka, Japan, May 26-29, 2015. (6 S.) (2015)

Mamuschkin, V., Olowinsky, A., van der Straeten, K., Engelmann, C.: Laser transmission welding of absorber-free thermoplastics using dynamic beam superposition
Proc. SPIE 9356, 93560Y (8 S.) (2015)

Mingareev, I., Gehlich, N., Bonhoff, T., Abdulfattah, A., Sincore, A. M., Kadwani, P., Shah, L., Richardson, M.:
Principles and applications of trans-wafer processing using a 2-µm thulium fiber laser
Int. J. Adv. Manuf. Technol. (Online first) (12 S.) (2015)

Meixner, M., Stollenwerk, J., Weigt, W., Zschuppe, M.:
Laser statt Trockenöfen
Farbe und Lack Nr. 3, 88-92 (2015)

Merkt, S., Hinke, C., Bültmann, J., Brandt, M., Xie, Y. M. :
Mechanical response of TiAl6V4 lattice structures manufactured by selective laser melting in quasistatic and dynamic compression tests
Journal of Laser Applications 27 (S1), S17006 (6 S.) (2015)

Nottrodt, N., Gillner, A., Dietrich, M., Leonards, H., Hoffmann, A., Wehner, M., Bremus-Köbberling, E.: Local surface functionalization of polymer composites with RGD for hernia implants
BioNanoMaterials 16 (2-3), 138-143 (2015)

Nüsser, C., Weingarten, C.:
Polieren von Oberflächen mit Laserstrahlung
Laser Mag. Nr. 3, 9-10 (2015)

Nüsser, C., Kumstel, J., Kierowski, T., Diatlov, A., Willenborg, E.:
Process- and Material-Induced Surface Structures During Laser Polishing
Advanced Engineering Materials 17, 268-277 (2015)

Olowinsky, A., Engelmann, C., Mamuschkin, V.:
Klare Sicht mit neuem Licht
Kunststoffe Nr. 6, 26-29 (2015)

Oreshkin, O., Küpper, M., Temmler, A., Willenborg, E.:
Active reduction of waviness through processing with modulated laser power
Journal of Laser Applications 27 (2), 22004 (7 S.) (2015)

Odstrcil, M., Baksh, P., Kim, H., Boden, S. A., Brocklesby, W. S., Frey, J. G.:
Ultra-broadband ptychography with self-consistent coherence estimation from a high harmonic source
Proc.  SPIE 9589, 958912 (8 S.) (2015)

Odstrcil, M., Bussmann, J., Rudolf, D., Bresenitz, R., Miao, J., Brocklesby, W.S., Juschkin, L.:
Ptychographic imaging with a compact gas–discharge plasma extreme ultraviolet light source
Opt. Lett. 40 (23), 5574-5577 (2015)

Pérez-Serrano, A., Vilera, M., Esquivias, I., Faugeron, M., Krakowski, M., van Dijk, F., Kochem, G., Traub, M., Adamiec, P.,  Barbero, J., Ai, X., Rarity, J. G., Quatrevalet, M., Ehret, G.:
Atmospheric CO 2 remote sensing system based on high brightness semiconductor lasers and single photon counting detection
Proc. SPIE 9645, 964503 (10 S.) (2015)

Petring, D.:
Latest development in the CO2 versus fibre laser cutting debate
ILAS 2015, 4th UK Industrial Laser Applications Symposium,
March 17-18, 2015, Kenilworth, UK. (29 S.) (2015)

Pocorni, J., Petring, D., Powell, J., Deichsel, E., Kaplan, A.F. H.:
Measuring the melt flow on the laser cut front
Phys. Procedia (Online first)(11 S.) (2015)

Poprawe, R.:
Digital photonic production
LIA Today Jan/Feb. 14-15 (2015)

Poprawe, R., Hinke, C., Meiners, W., Schrage, J., Bremen, S., Merkt, S.:
SLM Production Systems: Recent Developments in Process Development, Machine Concepts and Component Design
Advances in Production Technology,
Ed. by Christian Brecher. Heidelberg [usw.]: Springer,
Lecture Notes in Production Engineering, pp.49-65 (2015),
ISBN 978-3-319-12303-5

Powell, J., Ilar, T., Frostevarg, J., Torkamany, M. J., Na, S.-J., Petring, D., Zhang, L., Kaplan, A. F. H.:
Weld root instabilities in fiber laser welding
Journal of Laser Applications 27 (S2), S29008 (5 S.) (2015)

Pütsch, O., Temmler, A., Stollenwerk, J., Willenborg, E., Loosen, P.:
Active optical system for advanced 3D surface structuring by laser remelting
Proceedings of SPIE 9356 (10 S.) (2015)

Reininghaus, M., Ivanov, D., Maß, T.W.W., Eckert, S., Juschkin, L., Garcia, M. E., Taubner, T., Poprawe, R.:
Nanophotonic applications of fs-laser radiation induced nanostructures and their theoretical description
Optically Induced Nanostructures,
Hrsg. v. König, Karsten / Ostendorf, Andreas, Berlin,
De Gruyter, 25-46 (2015)

Risse, J., Such, A., Meiners, W.:
Additive manufacturing in series production: Recent research topics at Fraunhofer ILT with a focus on turbomachinery
LAMP 2015 – the 7th International Congress on Laser Advanced Materials Processing. Kitakyushu, Fukuoka, Japan, May 26-29, 2015. 5 S. (2015)

Rittinghaus, S., Weisheit, A., Mathes, M., Garcia Vargas, W.:
Laser metal deposition of Titanium Aluminides – a future repair technology for jet engine blades?
Ti-2015: The 13th World Conference on Titanium, August 16-20, 2015, San Diego, California (6 S.) (2015)

Ross, I., Kumstel, J., Bremen, S., Willenborg, E.:
Laser polishing of laser additive manufactured surfaces made from Inconel 718 and ASTM F75
Proceedings of Achieving Precision Tolerances in Additive Manufacturing.
ASPE Spring Topical Meeting, April 26-29, 2015, North Carolina State University, Raleigh, North Carolina, USA, pp. 136-140 (2015)

Roß, I., Temmler, A., Willenborg, E., Poprawe, R., Teller, M.:
Investigation of the influence of laser surface modifications on the adhesive wear behavior in dry cold extrusion of aluminium
LiM 2015: International WLT-Conference on Lasers in Manufacturing (LiM)
Munich, June 22-25, 2015. (10 S.) (2015)

Roß, I., Temmler, A., Poprawe, R., Teller, M., Hirt, G., Prünte, S.:
Untersuchung zur Oberflächenmodifikation mittels Laserpolieren für das schmiermittelfreie Kaltfließpressen von Aluminium
Dry Metal Forming 1, 143-151 (2015)

Rubel, D., Witte, U., Hengesbach, S., Traub, M., Hoffmann, D.:
Characterisation of ultra-narrow band filters for diode laser systems based on dense wavelength division multiplexing
2015 IEEE High Power Diode Lasers and Systems Conference (HPD), 14-15 Oct. 2015, 15-16 (2015)

Rudolf, D., Bußmann, J., Odstrcil, M., Dong, M., Bergmann, K., Danylyuk, D., Juschkin, L.:
Interferometric broadband Fourier spectroscopy with a partially coherent gas-discharge extreme ultraviolet light source
Optics Letters 40, 2818-2821 (2015)

Russbueldt, P., Hoffmann, D., Höfer, M., Löhring, J., Luttmann, J., Meissner, A., Weitenberg, J., Traub, M., Sartorius, T., Esser, D., Wester, R., Loosen, P., Poprawe R.:
Innoslab amplifiers
IEEE Journal of Selected Topics in Quantum Electronics 21,
3100117-3100117 (2015)

Sändker, H., Stollenwerk, J., Hofmann, J., Loosen, P.:
Laser beam propagation and energy deposition in particulate PEEK layers. Proceedings of World of Photonics
WLT/ LiM Lasers in Manufacturing, München, 22.06.-25.06.2015, 9 S.  (2015)

Schopphoven, T., Gasser, A., Wissenbach, K., Poprawe, R.:
Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying
ICALEO International Congress on Applications of Lasers & Electro–Optics, Atlanta, GA, USA, October 18-22, 2015 (2015)

Schulz, W., Al Khawli, T.:
Meta-modelling techniques towards virtual production intelligence
In: Brecher, C. (ed.): Advances in Production Technology. Heidelberg [u.a.]: Springer (2015)
Lecture Notes in Production Engineering, pp. 69-84

Sertsu, M. G., Nardello, M., Giglia, A., Corso, A. J., Maurizio, C., Juschkin, L., Nicolosi, P.:
Analysis of buried interfaces in multilayer mirrors using grazing incidence extreme ultraviolet reflectometry near resonance edges
Appl. Opt. 54 (35), 10351-10358 (2015)

Sertsu, M. G., Giglia, A., Juschkin, L., Nicolosi, P.:
Irradiation of low energy ions damage analysis on multilayers
Proc. SPIE 9511, 95110P (8 S.) (2015)

Sertsu, M. G., Giglia, A., Brose, S., Comisso, A., Wang, Z. S., Juschkin, L., Nicolosi, P.:
Optical and structural characterization of CeO2/B4C multilayers near boron K-edge energy
Proc. SPIE 9510, 95100 (12 S.) (2015)

Sun, M., Eppelt, U., Schulz, W., Zhu, J.:
Mechanism of internal modification in bulk borosilicate glass with picosecond laser pulses at high repitition rates
Proc. SPIE 9532, 953214 (13 S.) (2015)

Temmler, A., Willenborg, E., Wissenbach, K.:
Design surfaces by laser remelting, Mat. Sci. Eng.Technol. 46 (7), 692-703 (2015)

Temmler, A., Schmickler, T.; Willenborg, E.:
Surface structuring by laser remelting of Inconel 718
LiM 2015: International WLT-Conference on Lasers in Manufacturing (LiM)
Munich, June 22-25, 2015 (13 S.)  (2015)

Teramoto, Y., Santos, B., Mertens, G., Kops, R., Kops, M., von Wezyk, A., Yabuta, H., Nagano, A., Shirai, T., Ashizawa, N., Nakamura, K., Kasama, K.:
High-radiance LDP source for mask-inspection application
Proc. SPIE 9422, 94220F, (9 S.) (2015)

Thombansen, U., Gatej, A., Pereira, M.:
Process observation in fiber laser-based selective laser melting
Optical Engineering 54, S11008 (2015)

Trautz, M., Koj, C., Uchtmann, H.:
Laserstrahlbohrungen für richtungsgenau positionierte Vollgewindeschrauben – Einbau und Tragverhalten
Bautechnik 92 (6), 403-411 (2015)

Tulea, C.-A., Caron, J., Gehlich, N., Lenenbach, A., Noll, R., Loosen, P.:
Laser cutting of bone tissue under bulk water with a pulsed ps-laser at 532 nm
J. Biomed. Opt. 20 (10), 105007 (9 S.) (2015)

Uchtmann, H.:
Drilling of cooling holes
LIA Today (May/June), 14-17 (2015)

Uchtmann, H., Kürschner, D., Kelbassa, I.:
Hybrid laser drilling of cooling holes by using millisecond pulsed fiber laser radiation and ultrashort pulsed laser radiation
ICALEO International Congress on Applications of Lasers & Electro–Optics, Atlanta, GA, USA, October 18-22, 2015. Paper 2008 (8 S.) (2015)

Uchtmann, H., Kuerschner, D., Kelbassa, I.:
Hybrid laser drilling of cooling holes by using millisecond pulsed fiber laser radiation and ultrashort pulsed laser radiation
LAMP 2015 – the 7th International Congress on Laser Advanced Materials Processing, Kitakyushu, Fukuoka, Japan, (7 S.)(2015)

van der Straeten, K., Engelmann, C., Olowinsky, A., Gillner, A.:
Laser transmission welding of long glass fiber reinforced thermoplastics
Proc. SPIE 9356, 93560H (7 S.) (2015)

van der Straeten, K., Engelmann, C.:
Laserbasierte Fügeverfahren
Lightweight Design Nr 2, 10-15 (2015)

Vogt, S., Schneider, F., Weisheit, A., Flaischerowitz, M.:
Combined cutting and local heat treatment with laser radiation of ultra high strength press hardened steels
In: 5th International Conference "Hot Sheet Metal Forming of High-Performance Steel", CHS 2015
Proceedings: 31.05.-03.06.2015, Toronto (2015)
ISBN: 978-3-95735-023-7. pp. 629-637

Vossen, G., Hermanns, T., Schüttler, J.:
Analysis and optimal control for free melt flow boundaries in laser cutting with distributed radiation
ZAMM Zeitschrift für Angewandte Mathematik und Mechanik 95 (3), 297-316 (2015)

Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., Poprawe, R.:
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
J. Mat. Proc. Technol. 221, 112-120 (2015)

Weingarten, C., Heidrich, S., Wu, Y., Willenborg, E.:
Laser polishing of glass
Optifab 2015, Ed. by J. L. Bentley, S. Stoebenau. Rochester, N.Y., October 12-15, 2015, Proc. SPIE 9633. 963303 (10 S.) (2015)

Weitenberg, J., Rußbüldt, P.,  Pupeza, I., Udem, Th., Hoffmann, H.-D.,  Poprawe, R.:
Geometrical on-axis access to high-finesse resonators by quasi-imaging: a theoretical description
Journal of Optics A-Pure and Applied Optics 17, 1-17 (2015)

Wilson, D., Rudolf, D., Weier, C., Adam, R., Winkler, G., Frömter, R., Danylyuk, S., Bergmann, K., Grützmacher, D., Schneider, C. M., Juschkin, L.:
Generation of circularly polarized radiation from a compact plasma-based EUV light source for tabletop X-ray magnetic circular dichroism studies, In: JARA-FIT Annual Report 2014. Jülich: JARA Jülich Aachen Research Alliance, pp. 113-114 (2015)

Witte, U., Rubel, D., Traub, M., Hamann, M., Hengesbach, S., Hoffmann, D.: Dense wavelength multiplexing and 35 µm-fiber coupling of wavelength chirped high power diode laser bars. Advanced Solid State Lasers Conference 2015. Berlin, Germany, October 4-9, 2015. ISBN: 978-1-943580-02-6. Paper AF1A.6 (3 S.) (2015)

Witte, U., Hamann, M., Di Meo, A., Rubel, D., Traub, M., Hoffmann, D.:
High power diode laser with 23W ex 35 μm fibre
2015 IEEE High Power Diode Lasers and Systems Conference (HPD), 14-15 Oct. 2015, pp. 17-18 (2015)

Zhong, C., Biermann, T., Gasser, A., Poprawe, R.:
Experimental study of effects of main process parameters on porosity, track geometry, deposition rate, and powder efficiency for high deposition rate laser metal deposition
Journal of Laser Applications 27 (4), 42003 (9 S.)(2015)

Zhong, C., Gasser, A., Kittel, J., Schopphoven, T., Pirch, N., Fu, J., Poprawe, R.:
Study of process window development for high deposition-rate laser material deposition by using mixed processing parameters
Journal of Laser Applications 27 (3), 32008 (7 S.) (2015)

Zhong, C., Gasser, A., Schopphoven, T., Poprawe, R.:
Experimental study of porosity reduction in high deposition-rate laser material deposition
Optics Laser Techol. 75, 87-92 (2015

Aden, M., Mamuschkin, V., Olowinsky, A., Glaser, S.:
Influence of Titanium dioxide pigments on the optical properties of polycarbonate and polypropylene for diode laser wavelengths
J. Appl. Polymer Sci. 131 (7), 40073-40077 (2014)

Alkhayat, M., Khavkin, E., Gasser, A., Meiners, W., Kelbassa, I.:
Comparison of geometrical properties of parts manufactured by powder bed based (SLM) and powder fed based (LMD) laser additive manufacturing technologies
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA,
Paper 1502 (6 S.) (2014)

Arias, J. L., Montealegre, M.A., Vidal, F., Rodriguez, J., Mann, S., Abels, P., Motmans, F.:
Real-time laser cladding control with variable spot size
Proc. SPIE 8970, 1-15 (2014)

Behrens, B.-A., Yilkiran,T., Ocylok, S., Weisheit, A., Kelbassa, I.:
Deposition welding of hot forging dies using nanoparticle reinforced weld metal
Prod. Eng. Online First (14. S.) (2014)

Bensmann, S., Gaußmann, F., Lewin, M., Wüppen, J., Nyga, S., Janzen, C., Jungbluth, B., Taubner, T.:
Near-field imaging and spectroscopy of locally strained GaN using an IR broadband laser
Opt. Expr. 22 (19), 22369-22381 (2014)

Britten, S. W., Seva Bala Sundaram, R., Olowinsky, A., Gillner, A.:
Quasi-simultaneous laser soldering for the interconnection of back-contact solar cells with composite foils
Proc. SPIE 8968, 89680V (11 S.) (2014)

Brüning, S., Jenke, G., Du, JK., Gillner, A.:
High precision laser processing of steel surfaces with sub-ns-lasers
Physics Procedia  56, 919-926 (2014)

Buchbinder, D., Meiners, W., Pirch, N., Wissenbach, K.:
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
J. Laser Appl. 26 (1), 012004 (10 S.) (2014)

Buchbinder, D., Meiners, W., Wissenbach, K., Poprawe, R.:
Selective Laser Melting of aluminium die-cast alloy. Correlations between process parameters, solidification conditions and resulting mechanical properties
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA (7 S.) (2014)

Buchbinder, D., Meiners, W., Wissenbach, K., Poprawe, R.:
Selective Laser Melting of aluminium die-cast alloy
Fraunhofer Direct Digital Manufacturing Conference 2014, March 12-13, 2014, Berlin, Germany (7 S.) (2014)

Bürgermeister, L., Romero López, F. , Schulz, W.:
Physical and mathematical modeling of antimicrobial photodynamic therapy
J. Biomed. Opt. 19, 071411 (10 S.) (2014)

Büsing, L., Eifel, S., Loosen, P.:
Design, alignment and applications of optical systems for parallel processing with ultra-short laser pulses
Proc. SPIE 9131, 91310C (12 S.) (2014)

Carstens, H., Lilienfein, N., Holzberger, S.: Jocher, C., Eidam, T., Limpert, J., Tünnermann, A., Weitenberg, J., Malgamdi, A., Alahmed, Z., Azzeer, A., Apolonski, A., Fill, E., Pupeza, I., Krausz, F.:
Thermal limitations for power scaling of femtosecond enhancement cavities
High Intensity Lasers and High Field Phenomena (HILAS) 2014. Paper: HTu1C.6 (3 S.) (2014)

Carstens, H., Lilienfein, N., Holzberger, S., Jocher, C., Eidam, T., Limpert, J., Tünnermann, A., Weitenberg, J., Yost, D. C., Alghamdi, A., Alahmed, Z., Azzeer, A., Apolonski, A., Fill, E., Krausz, F., Pupeza, I.:
Megawatt-scale average-power ultrashort pulses in an enhancement cavity
Opt. Lett. 39 (9), 2595-2598 (2014)

Dahmen, M., Daamen, M., Hirt, G.:
Laser beam welding of high manganese TWIP steels produced by twin roll strip casting
2nd Int. Conf. on High Manganese Steel, August 31. -September 4., 2014. Proceedings. (Ed.) W. Bleck, D. Raabe.
Aachen: IEHK Steel Inst., RWTH; Düsseldorf: Max-Planck-Institut für Eisenforschung (4 S.) (2014)

Dahmen, M., Daamen, M., Janzen, V., Lindner, S., Schneider, A., Wagener, R.:
Laser beam welding of new ultra-high strength and supra-ductile steels
SCT14 Future trends in steel development, processing technologies and applications, Hrsg. H.-J. Wieland, S. Brockmann,
Düsseldorf: Verl. Stahleisen, pp. 282-289 (2014)

Dahmen, M., Janzen, V., Lindner, S., Wagener, R.:
Laser beam welding of ultra-high strength chromium steel with martensitic microstructure
Physics Procedia  56, 525-534 (2014)

Elsen, F., Heinzig, M., Livrozet, M. J.: Löhring, J., Wüppen, J., Büdenbender, C., Fix, A., Jungbluth, B., Hoffmann, H.-D.:
Feasibility and performance study for a space-borne 1645 nm OPO for French-German satellite mission MERLIN
Proc. SPIE 9135, 913515 (7 S.) 1-7 (2014)

Esquivias, I., Consoli, A., Krakowski, M., Faugeron, M., Kochem, G., Traub, M., Barbero, J., Fiadino, P., Ai, X., Rarity, J., Quatrevalet, M., Ehret, G.:
High-brightness all semiconductor laser at 1.57 µm for space-borne lidar measurements of atmospheric carbon dioxide: device design and analysis of requirements
Proc. SPIE 9135, 913516 (8 S.) (2014)

Finger, J., Reininghaus, M.:
Effect of pulse to pulse interactions on ultra-short pulse laser drilling of steel with repetition rates up to 10 MHz
Opt. Expr. 22 (15), 18790-18799 (2014)

Gasser, A.:
Fertigen und Instandsetzen mit generativen Laserverfahren
MM Maschinenmarkt 38, 44-47 (2014)

Gatej, A., Loosen, P.:
Methods for compensation of thermal lensing based on Thermo Optical (TOP) Analysis
Proc. SPIE 9131, 91310F (8 S.) (2014)

Gebhardt, M., Gaida, C., Kadwani, P., Sincore, A., Gehlich, N., Jeon, C., Shah, L., Richardson, M.:
High peak-power mid-infrared ZnGeP2 optical parametric oscillator pumped by a Tm:fiber master oscillator power amplifier system
Opt. Lett. 39 (5), 1212-1215 (2014)

Gehlich, N., Bonhoff, T., Sisken, L., Ramme, M., Gaida, C., Gebhardt, M., Mingareev, I., Shah, L., Richardson, M. C.:
Utilizing the transparency of semiconductors via "backside" machining with a nanosecond 2 μm Tm:fiber laser
Proc. SPIE 8968, 89680W (7 S.) (2014)

Gronloh, B., Russbueldt, P., Jungbluth, B., Hoffmann, H.-D.:
Green sub-ps laser exceeding 400 W of average power
Proc. SPIE 8959, 89590T (10 S.) (2014)

Gronloh, B., Russbueldt, P., Jungbluth, B., Hoffmann, H.-D.:
Ultrafast green laser exceeding 400 W of average power
Proc. SPIE 9135, 91350C (11 S.) (2014)

Gu, D., Hong, C., Jia, Q., Dai, D., Gasser, A., Weisheit, A., Kelbassa, I., Zhong, M., Poprawe, R.:
Combined strengthening of multi-phase and graded interface in laser additive manufactured TiC/Inconel 718 composites
J. Phys. D 47, (4) 45309- (2014)

He, C., Zibner, F., Fornaroli, C., Ryll, J., Holtkamp, J., Gillner, A. :
High-precision helical cutting using ultra-short laser pulses
Physics Procedia  56, 1066-1072 (2014)

Heinen, P., Wu, H., Olowinsky, A., Gillner, A.:
Helium-tight laser beam welding of aluminium with brilliant laser beam radiation
Physics Procedia 56, 554-565 (2014)

Heidrich, S., Richmann, A., Schmitz, P., Willenborg, E., Wissenbach, K., Loosen, P., Poprawe, R.:
Optics manufacturing by laser radiation
Optics and Lasers in Engineering, 34-40 (2014)

Heidrich, S., Weingarten, C., Willenborg, E., Poprawe, R.:
Polishing and form correction with laser radiation
Optical Fabrication and Testing, Kohala Coast, Hawaii, United States, June 22-26, 2014, Fabrication Process Technology I (OTu1B.4) (3 S.) (2014), ISBN: 978-1-55752-747-9

Hengesbach, S., Hoffmann, D., Traub, M., Poprawe, R.:
Comparison of edge emitter and vertical emitter based diode lasers for materials processing
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA,
Paper 304 (9 S.) (2014)

Hengesbach, S., Holly, C., Krauch, N., Witte, U., Westphalen, T., Traub, M., Hoffmann, D.:
High-Power Dense Wavelength Division Multiplexing (HP-DWDM) of frequency stabilized 9xx diode laser bars with a channel spacing of 1.5 nm
Proc. SPIE 8965, 89650C (9 S.) (2014)

Hermans, M., Gottmann, J., Riedel, F.:
Selective, laser induced etching of fused silica at high scan-speeds using KOH
J. Laser Micro/Nanoeng. 9 (2), 126-131 (2014)

Holly, C., Hengesbach, S., Traub, M., Hoffmann, D.:
Numerical analysis of external feedback concepts for spectral stabilization of high-power broad-area semiconductor lasers
Proc. SPIE 8965, 89650K (8 S.) (2014)

Holzberger, S., Högner, M., Weitenberg, J., Esser, D., Eidam, T., Limpert, J., Tünnermann, A., Fill, E., Krausz, F., Yakovlev, V. S., Pupeza, I.:
Power-scalable and efficient geometric XUV output coupling for cavity-enhanced high harmonic generation
CLEO 2104 - Laser Science to Photonic Applications. 08 Jun 2014 - 13 Jun 2014, San Jose, California, USA. 2 S. (2014)

Hopmann, C., Böttcher, A., van der Straeten, K., Riedel, R., Schneider, F., Engelmann, C., Fischer, K.:
Neue Prozesskette für faserverstärkte Thermoplaste
WT Werkstattstechnik Online 104 (9), 575-580 (2014)

Hopmann, C., Brecher, C., Loosen, P., Röbig, M., Meiers, B., Berens, M.:
Mit Kunststoff in die optische Zukunft
Kunststoffe 2014 (10), 154-159 (2014)

Jänchen, R., Brosda, M., Wendt, G., Olowinsky, A.:
Mit Licht - flexibel und dicht
Pack Report, 46-49 (2014)

Jauer, L., Leonards, H.:
3D-Druck und Biofabrikation: Photonische Prozesse in der Medizintechnik
RWTH-Themen: Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2014 (1), 42-45 (2014)

Jiang, D., Hong, C., Zhong, M., Alkhayat, M., Weisheit, A., Gasser, A., Zhang, H., Kelbassa, I., Poprawe, R.:
Fabrication of nano-TiCp reinforced Inconel 625 composite coatings by partial dissolution of micro-TiCp through laser cladding energy input control
Surf. Coat. Technol. 249, 125-131 (2014)

Khalil, O. M., Mingareev, I., Bonhoff, T., El-Sherid, A. F., Richardson, M. C., Harith, M. A.:
Studying the effect of zeolite inclusion in aluminum alloy on measurement of its surface hardness using laser-induced breakdown spectroscopy technique
Optical Engineering 53, 1-5 (2014)

Kind, H., Gehlen, E., Aden, M., Olowinsky, A., Gillner, A.:
Laser glass frit sealing for encapsulation of vacuum insulation glasses
Physics Procedia  56, 673-680 (2014)

Krämer, S., Fiedler, W., Drenker, A., Abels, P.:
Seam tracking with texture based image processing for laser materials processing
Proc. of SPIE 8963, 89630P (9 S.) (2014)

Löhring, J., Luttmann, J., Kasemann, R., Schlösser, M., Klein, J., Hoffmann, H.-D., Amediek, A., Büdenbender, C., Fix, A., Wirth, M., Quatrevalet, M., Ehret, G.:
INNOSLAB-based single-frequency MOPA for airborne lidar detection of CO2 and methane
Proc. SPIE 8959, 1-8 (2014)

Livrozet, M. J., Elsen, F., Wüppen, J., Löhring, J., Büdenbender, C., Fix, A., Jungbluth, B., Hoffmann, D.:
Feasibility and performance study for a space-borne 1645 nm OPO for French-German satellite mission MERLIN
Proc. SPIE 8959, 89590G (7) (2014)

Lott, P., Stollenwerk, J., Wissenbach, K.:
Laser-based production of carbon fibers
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA,
Paper M 602 (6 S.) (2014)

Maischner, D., Ocylok, S., Becker, D., Weisheit, A.:
Einsatzmöglichkeiten des Laserauftragschweißens und des Selektiven Laserschmelzen im Werkzeugbau für Bauteile aus Kupfer im Bereich der Spritzgießtechnik
Metall (11), 456-458 (2014)

Mamuschkin, V., Olowinsky, A., Britten, S., Engelmann, C.:
Investigations on laser transmission welding of absorber-free thermoplastics
Proc. SPIE  8968, 1-9 (2014)

Mehlmann, B., Gehlen, E., Olowinsky, A., Gillner, A.:
Laser micro welding for ribbon bonding
Physics Procedia  56, 776-781 (2014)

Mehlmann, B., Olowinsky, A., Thuilot, M., Gillner, A.:
Spatially modulated laser beam micro welding of CuSn6 and nickel-plated DC04 steel for battery applications
JLMN J. Laser Micro/Nanoeng. 9 (3), 276-281 (2014)

Mincuzzi, G., Vesce, L., Schulz-Ruhtenberg, M., Gehlen, E., Reale, A., Di Carlo, A., Brown, T. M.:
Taking temperature processing out of dye-sensitized solar cell fabrication: Fully laser-manufactured devices
Adv. Energy Mat. 4, 1400421 (8 S.) (2014)

Mingareev, I., Gehlich, N., Bonhoff, T., Meiners, W., Kelbassa, I., Biermann, T., Richardson, M. C.:
Post-processing of 3D-printed parts using femtosecond and picosecond laser radiation
Proc. SPIE 8970, 89700 (7 S.) (2014)

Moench, H., Andreadaki, A., Gronenborn, S., Kolb, J. S., Loosen, P., Miller, M., Schwarz, T., van der Lee, A., Weichmann, U.:
High power electrically pumped VECSEL and arrays
Vertical External Cavity Surface Emitting Lasers (VECSELs) IV
Editor(s): Jerome V. Moloney. Proc. SPIE Vol. 8966 (10 S.) (2014)

Noll, R., Fricke-Begemann, C., Brunk, M., Connemann, S., Meinhardt, C., Scharun, M., Sturm, V., Makowe, J., Gehlen, C.:
Laser-induced breakdown spectroscopy expands into industrial applications
Spectrochim. Acta P. B: Atomic Spectrosc. 93, 41-51 (2014)

Nottrodt, N., Leonhäuser, D., Bongard, Y., Bremus-Köbberling, E., Gillner A.:
Local ultraviolet laser irradiation for gradients on biocompatible polymer surfaces
J. Biomed. Mat. Res. A 102, 999-1007 (2014)

Nottrodt, N., Leonhäuser, D., Elling, L., Bremus-Köbberling, E., Gillner, A.:
Laser based functionalization for graded immobilization of biomolecules on biocompatible polymer surfaces
Nanobio Europe, Münster, Germany, June 2-4, 2014. 10th Int. Congr. & Exhibition on Nanobiotechnology, 1 S. (2014)

Ocylok, S., Alexeev, E., Mann, S., Weisheit, A., Wissenbach, K., Kelbassa, I.:
Correlations of melt pool geometry and process parameters during laser metal deposition by coaxial process monitoring
Physics Procedia 56, 228-238 (2014)

Özmert, A., Neisser-Deiters, P., Drenker, A.:
Detectability of penetration depth based on weld pool geometry and process emission spectrum in laser welding of copper
Proc. SPIE 9135, 91351W (7 S.) (2014)

Papadakis, L., Loizou, A., Risse, J., Bremen, S., Schrage, J.:
A computational reduction model for appraising structural effects in selective laser melting manufacturing
Virtual and Physical Prototyping 9 (1) 17-25 (2014)

Pocorni, J. K., Petring, D., Powell, J., Deichsel, E., Kaplan, A. F. H.:
Differences in cutting efficiency between CO₂ and Fiber Lasers when cutting mild and stainless steels
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA,
Paper 905, 593-600, ISBN 9781940168029 (2014)

Powell, J., Illar, T., Frostevarg, J., Torkamany, M. J., Na, S., Petring, D., Zhang, L., Kaplan, A. F. H.:
Weld root instabilities in fiber laser welding
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA,
Paper 1601, 753-758, ISBN 9781940168029 (2014)

Preussner, J., Oeser, S., Pfeiffer, W., Temmler, A., Willenborg, E.:
Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
International Journal of Materials Research 105 (4), 328-336 (2014)

Pupeza, I., Högner, M., Weitenberg, J., Holzberger, S., Esser, D., Eidam, T., Limpert, J., Tünnermann, A., Fill, E., Yakovlev, V. S.:
Cavity-enhanced high-harmonic generation with spatially tailored driving fields
Phys. Rev. Lett.112 (10), 103902 (5 S.) (2014)
Cham: Springer Int. Publ. 2014. pp.117-124 (2014)

Reinhard, R., Al Khawli, T., Eppelt, U., Meisen, T., Schilberg, D., Schulz, W., Jeschke, S.:
The contribution of virtual production intelligence to laser cutting planning processes
Zaeh, M.: Enabling Manufacturing Competitiveness and Economic Sustainability.
Proc. of the 5th Int. Conf. on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, Oct. 6th-9th, 2013.,
Cham: Springer Int. Publ. 2014. pp.117-124 (2014)

Reininghaus, M., Kalupka, C., Faley, O., Holtum, T., Finger, J., Stampfer, C.:
Dynamics of ultrashort pulsed laser radiation induced non-thermal ablation of graphite
Appl. Phys. A 117 (4) 1873-1878 (2014)

Riedel, R., Rothardt, J., Beil, K., Gronloh, B., Klenke, A., Höppner, H., Schulz, M., Teubner, U., Kränkel, C., Limpert, J., Tünnermann, A., Prandolini, M.J., Tavella, F.:
Thermal properties of borate crystals for high power optical parametric chirped-pulse amplification
Opt. Expr. 22 (15), 17607-17619 (2014)

Riedel, R., Stephanides, A., Prandolini, M. J., Gronloh, B., Jungbluth, B., Mans, T., Tavella, F.:
Power scaling of supercontinuum seeded megahertz-repetition rate optical parametric chirped pulse amplifiers
Optics Letters 39, 1422-1424 (2014)

Riester, D., Özmert, A., Wehner, M.:
Laser tool for single cell transfer
J. Laser Micro/Nanoeng. 9 (2) 93-97 (2014)

Rolink, G., Vogt, S., Sencekova, L., Weisheit, A., Poprawe, R., Palm, M.:
Laser metal deposition and selective laser melting of Fe-28 at.% Al
J. Mater. Res. 29 (17), 2036-2043 (2014)

Rolink, G., Weisheit, A., Biermann, T., Bobzin, K., Öte, M., Linke, T. F., Schulz, C., Kelbassa, I.:
Investigations of laser clad, thermal sprayed and laser remelted AlSi20-coatings on magnesium alloy AZ31B under constant and cycling thermal load
Surf. Coat. Technol. 259, 751-758 (2014)

Scharun, M., Fricke-Begemann, C.:
Handheld chemical analysis with laser for recycling applications
Sensor-based Sorting 2014, (Ed.) Waschki, Ulrich,
Schriftenreihe der GDMB Gesellschaft der Metallurgen und Bergleute e.V. 135, 107-115 (2014)

Schulz, W., Al Khawli, T.:
Meta-modelling techniques towards virtual production intelligence
Brecher, C. (ed.): Advances in Production Technology, ISBN 978-3319123035, pp. 69-84, Lecture Notes in Production Engineering (2014)

Schulz, W., Nießen, M., Wollschläger, J., Hansen, U.: Pittner, A., Rethmeier, M.:
Schnelle numerische Methoden für die effiziente Temperaturfeldberechnung in bauteilnahen Geometrien und Mehrlagenschweißungen
Schweißen Schneiden 66 (1-2), 34-37 (2014)

Schulz-Ruhtenberg, M., Kolbusch, T., Abreu Fernandes, S., Wiesner, M., Melle, T.:
Seminal tools for roll-to-roll manufacturing
Laser Technik J. 11 (1), 21-25 (2014)

Stollenwerk, J., Loosen, P.:
Zukunftsweisendes Forschungsprojekt
b on top 2014, 44-47 (2014)

Strotkamp, M., Witte, U., Munk, A., Hartung, A., Gausmann, S., Hengesbach, S., Traub, M., Hoffmann, H.-D., Hoeffner, J., Jungbluth, B.:
Broadly tunable, longitudinally diode-pumped Alexandrite laser
Proc. SPIE 8959, 89591G (6 S.) (2014)

Sturm, V., Fleige, R., de Kanter, M., Leitner, R., Pilz, K., Fischer, D., Hubmer, G., Noll, R.:
Laser-Induced Breakdown Spectroscopy for 24/7 automatic liquid slag analysis at a steel works
Analytical Chemistry 86 (19), 9687–9692 (2014)

Sun, M., Eppelt, U., Schulz, W., Zhu, J.:
Ultrafast reflection and secondary ablation in laser processing of transparent dielectrics with ultrashort pulses
Optical Engineering 53 (5), 1-8 (2014)

Temmler, A., Pütsch, O., Stollenwerk, J., Willenborg, E., Loosen, P.:
Optical set-up for dynamic superposition of three laser beams for structuring and polishing applications
Opt. Expr. 22 (2), 1387-1393 (2014)

Temmler, A., Walochnik, M. A., Willenborg, E., Wissenbach, K.:
Surface structuring by remelting of titanium alloy TI6AL4V
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA,
Paper ID 1401, ISBN 9781940168029 (10 S.) (2014)

Thombansen, U., Gatej, A., Pereira, M.:
Tracking the course of the manufacturing process in selective laser melting
Proc. SPIE 8963, 89630O (7 S.) (2014)

Thombansen, U., Hermanns, T.:
In-situ measurement of the focal position in one and ten micron laser cutting
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA,
Paper 179, ISBN 9781940168029 (4 S.) (2014)

Thombansen, U., Hermanns, T.: Molitor, T., Pereira, M., Schulz, W.:
Measurement of cut front properties in laser cutting
Physics Procedia  56, 885-891 (2014)

Thombansen, U., Hermanns, T., Stoyanov, S.:
Setup and maintenance of manufacturing quality in CO² laser cutting
Procedia CIRP 20, 98 – 102 (2014)

Thombansen, U., Ungers, M.:
Illumination for process observation in laser material processing
Physics Procedia  56, 1286-1296 (2014)

Thombansen, U., Ungers, M.:
Cognition for robot scanner based remote welding
Proc. SPIE  8963, 89630N (8 S.) (2014)

Traub, M., Hoffmann, D., Hengesbach, S., Loosen, P.:
Automatic design of multi-lens optical systems based on stock lenses for high power lasers
International Optical Design Conference, Kohala Coast, Hawaii United States, June 22-26, 2014, Optimization (IW1A) (2. S.) (2014)

Uchtmann, H., Friedrichs, M., Kelbassa, I.:
Drilling of cooling holes by using high power ultrashort pulsed laser radiation
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego, USA (5 S.) (2014)

Uchtmann, H., Kelbassa, I.:
CAx process chain for automated laser drilling of tool molds
J. Mech. Eng. Autom. 4, 427-431 (2014)

Vossen, G., Hermann, T.:
On an optimal control problem in laser cutting with mixed finite-/infinite-dimensional constraints
J. Ind. Managem. Optim. 10 (2), 503-519 (2014)

Wester, R., Müller, G., Völl, A., Berens, M., Stollenwerk, J., Loosen, P.:
Designing optical free-form surfaces for extended sources
Opt. Expr. 22 (S2), A552-A560 (2014)

Westphalen, T., Hengesbach, S., Holly, C., Traub, M., Hoffmann, D.:
Automated alignment of fast-axis collimator lenses for high-power diode laser bars
Proc. of SPIE 8965 (6 S.) (2014)

Willenborg, E., Heidrich, S.: Temmler, A.:
Highlights of the 1st Conference on Laser Polishing LaP 2014
Optical Fabrication and Testing, Kohala Coast, Hawaii, United States, June 22-26, 2014, Fabrication Process Technology I, (OTu1B.1)
ISBN: 978-1-55752-747-9 (3 S.) (2014)

Wilson, D., Rudolf, D., Weier, C., Adam, R., Winkler, G., Frömter, R., Danylyuk, S., Bergmann, K., Grützmacher, D., Schneider, C. M., Juschkin, L.:
Generation of circularly polarized radiation from a compact plasma-based extreme ultraviolet light source for tabletop X-ray magnetic circular dichroism studies
Rev. Scient. Instr. 85 (10), 103110 (9 S.) (2014)

Zhong, M., Jiang, D., Zhang, H., Hong, C., Weisheit, A,., Kelbassa, I.:
Fabrication of nanoparticulate reinforced metal matrix composites by laser cladding
J. Laser Appl. 26, 022007 (10 S.) (2014)

Aden, M.,  Liviany, F., Olowinsky, A.:
Joint strength for laser transmission welding of thermoplastics: A simulation approach
International Polymer Processing 28, 79-83 (2013)

Aden, M., Mamuschkin, V., Olowinsky, A., Glaser, S.:
Influence of Titanium dioxide pigments on the optical properties of polycarbonate and polypropylene for diode laser wavelengths
J. Appl. Polymer Sci. (early view) 2013 (5 S.)

Aden, M., Otto, G., Duve, C.:
Irradiation strategy for laser transmission welding of thermoplastics using high brilliance laser source
Int. Polymer Processing 28 (3), 300-305 (2013)

Becker, M., Werner, M., Fitzau, O., Esser, D., Kobelke, J.: Lorenz, A., Schwuchow, A., Rothhardt, M., Schuster, K., Hoffmann, D., Bartelt, H.:
Laser-drilled free-form silica fiber preforms for microstructured optical fibers
Opt. Fiber Technol. 19 (5), 482-485 (2013)

Becker, M., Werner, M., Fitzau, O., Esser, D., Kobelke, J., Schuster, K., Lorenz, A., Schwuchow, A., Rothhardt, M., Hoffmann, D., Bartelt, H.:
Laser processed preforms for microstructured optical fibers
Proc. SPIE 8785, 8785C9 (8 S.) (2013)

Berens, M., Bruneton, A., Bäuerle, A., Traub, M., Wester, R., Stollenwerk, J., Loosen, P.:
Multiple intensity distributions from a single optical element
Proc. SPIE. Vol. 8834, 88340M (7 S.) (2013)

Bi, G., Sun, C. N., Gasser, A.:
Study on influential factors for process monitoring and control in laser aided additive manufacturing
J. Mat. Proc. Technol. 213 (3), 463-468 (2013)

Britten, S., Olowinsky, A. Gillner, A.:
Stress-minimized laser soldering of h-pattern multicrystalline silicon solar cells
Physics Procedia  41, 153-163 (2013)

Bruneton, A., Bäuerle, A., Wester, R., Stollenwerk, J., Loosen, P.:
High resolution irradiance tailoring using multiple freeform surfaces
Opt. Expr. 21, Nr. 9, 10563-10571 (2013)

Bruneton, A., Bäuerle, A., Wester, R., Stollenwerk, J., Loosen, P.:
Limitations of the ray mapping approach in freeform optics design
Opt. Lett. 38 (11), 1945-1947 (2013)

Buchbinder, D., Meiners, W., Hinke, C., Merkt, S.:
Generative Fertigung mit Selective Laser Melting auf dem Weg zur Serienproduktion?
DVS Congress 2013, Düsseldorf: DVS-Media
DVS-Berichte Bd 296 (5 S.) (2013)

Büsing, L., Bonhoff, T., Gottmann, J., Loosen, P.:
Deformation of ultra-short laser pulses by optical systems for laser scanners
Opt. Expr. 21 (21), 24475-24482 (2013)

Carstens, H., Holzberger, S., Kaster, J., Weitenberg, J., Pervak, V., Apolonski, A., Fill, E., Krausz, F., Pupeza, I.:
Large-mode enhancement cavities
Opt. Expr. 21 (9), 11606-11617 (2013)

Chen, X., Yagi, M., Akiyama, Y., Machida, O., Ohta, E., Meixner, M., Stollenwerk, J., Boettger, U., Schneller, T.:
Fabrication of multilayer Pb (Zr_0.53 Ti_0.47 ) O3 film crystallized by laser annealing
Jap. J. Appl. Phys. 52,09KA06 (4 S.) (2013)

Crump, P., Knigge, S., Maaßdorf, A., Bugge, F., Hengesbach, S., Witte, U., Hoffmann, H. D., Köhler, B., Hubrich, R., Kissel, H., Biesenbach, J., Erbert, G., Tränkle, G.:
Low-loss, smile-insensitive external frequency-stabilization of high power diode lasers enabled by vertical designs with extremely low divergence angle and high efficiency
Proc. SPIE 8605, 0T1-13 (2013)

Danylyuk, S., Kim, H., Brose, S., Dittberner, C., Loosen, P., Taubner, T., Bergmann, K., Juschkin, L.:
Diffraction-assisted extreme ultraviolet proximity lithography for fabrication of nanophotonic arrays
J. Vac. Sci. Technol. B 31(2), 21602/1-21602/6 (2013)

Danylyuk, S., Loosen, P., Bergmann, K., Kim, H., Juschkin, L.:
Scalability limits of Talbot lithography with plasma-based extreme ultraviolet sources
J. Micro/Nanolith. MEMS MOEMS 12, 033002 (7 S.) (2013)

Esser, D., Weitenberg, J., Bröring, W., Pupeza, I., Holzberger, S., Hoffmann, H.-D.:
Laser-manufactured mirrors for geometrical output coupling of intracavity-generated high harmonics
Opt. Expr. 21 (22), 26797-26805 (2013)

Finger, J., Weinand, M., Wortmann, D.:
Ablation and cutting of carbon-fiber reinforced plastics using picosecond pulsed laser radiation with high average power
J. Laser Appl. 25, (4), 042007-1 (5 S.) (2013)

Finger, J., Weinand, M., Wortmann, D.:
Investigations on processing of carbon fiber reinforced plastics using ultrashort pulsed laser radiation with high average power
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miama/Fl., USA, Paper 1905 (6 S.) (2013)

Finger, J., Reininghaus, M., Wortmann, D., Cao, Z., Taubner, T.:
Laser fabricated nanoantennas for near-field applications
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miama/Fl., USA, N302 (5 S.) (2013)

Fornaroli, C., Holtkamp, J., Gillner, A.:
Dicing of thin Si wafers with a picosecond laser ablation process
Physics Procedia  41, 603-609 (2013)

Gottmann, J., Hermans, M., Ortmann, J. :
Digital photonic production of 3D micro fluidics in glass by high speed micro scanner
MATEC Web of Conferences 8, 05003 (2 S.) (2013)

Gottmann, J., Hermans, M., Ortmann, J.:
Microcutting and hollow 3D microstructures in glasses by In-volume Selective Laser-induced Etiching (ISLE)
J. Laser Micro/Nanoneng. 8 (1) 15-18 (2013)

Göttmann, A., Bailly, D., Bergweiler, G., Bambach, M., Stollenwerk, J., Hirt, G., Loosen, P.:
A novel approach for temperature control in ISF supported by laser and resistance heating
Int. J. Adv. Manuf. Technol. 67, 2195-2205 (2013)

Hagedorn, Y.-C., Risse, J., Meiners, W., Pirch, N., Wissenbach, K.:
Processing of nickel based superalloy MAR M-247 by means of High-Temperature Selective Laser Melting (HT-SLT)
In: High Value Manufacturing. Eds.: P. J. Bartolo et. al., pp. 291-295 (2013)

Hartmann, C., Hambach, N., Jüngst, M., Keller, S., Holtkamp, J., Gillner, A.:
High density perforation of thin Al-foils with ultra short pulse lasers
J. Laser Micro/Nanoeng. 8 (3), 266-270 (2013)

Hartmann, C., Hambach, N., Jüngst, M., Keller, S., Holtkamp, J., Gillner, A.:
High density perforation of thin Al-foils with ultra short pulse lasers
Proc. of LAMP2013 - the 6th Int. Congr. on Laser Advanced Materials Processing, 4 S. (2013)

Hauschild, D., Kumstel, J., Willenborg, E.:
Produktivität bei der Laserpolitur deutlich steigern
WT-Online 103 (11/12), 1-5 (2013)

Hawelka, D., Stollenwerk, J., Pirch, N., Wissenbach, K., Loosen, P.:
Improving surface properties by laser-based drying, gelation, and densification of printed sol-gel coatings
J. Coat. Technol. Res. 10, 8 S. Online first (2013)

Heidrich, S.:
Fast freeform processing
Mikroniek 53, (3), 48-50 (2013)

Heidrich, S., Richmann, A., Willenborg, E.:
Laser-based optics manufacturing
3rd EOS Conference on Manufacturing of Optical Components (EOSMOC 2013). Germany, 13 May 2013 - 15 May, (2 S.) (2013)

Hilzensauer, S., Gilly, J., Friedmann, P., Werner, M., Traub, M., Patterson, S., Neukum, J., Kelemen, M. T.:
High-power diode lasers between 1.8 µm and 3.0 µm
Proc. SPIE. Vol. 8640, 86401P (10 S.) (2013)

Hermans, M., Gottmann, J., Riedel, F.:
Selective, laser-induced etching of fused silica at high scan speeds
Proc. of LAMP2013 - 6th Int. Congr. on Laser Advanced Materials Processing. Washington, D.C.: The Catholic Univ. of America, (5 S.)  (2013)

Hengesbach, S., Krauch, N., Holly, C., Traub, M., Witte, U., Hoffmann, D.:
High-power dense wavelength division multiplexis of multimode diode laser radiation based on volume Bragg gratings
Opt. Lett. 38, 3154-3157 (2013)

Hengesbach, S., Witte, U., Traub, M., Hoffmann, D.:
Design of a DFB/DBR diode laser module including spectral multiplexing based on VBGs
High Power Diode Lasers and Systems Conference (HPD)
West Midlands, United Kingdom,16-17 Oct. 2013
Piscataway, N.J.: IEEE 2013, pp. 16-19

Hinke, Christian:
Digital photonic production and its emerging opportunities
LIA Today 2013, 14-16 (2013)

Holly, C., Hengesbach, S., Traub, M., Hoffmann, D.:
Simulation of spectral stabilization of high-power broad-area edge emitting semiconductor lasers
Opt. Expr. 21, 15553-15567 (2013)

Holters, M., Gatej, A., Haag, S., Müller, T., Loosen, P., Brecher, C.:
Self-optimizing Approach for teh Alignment of Optical Components
The 11th International Symposium of Measurement Technology and Intelligent Instruments, July 1st-5th, 2013 (6 S.) (2013)

Holters, M., Loosen, P.:
Selbstoptimierende Montage von Lasern unter Berücksichtigung von Bauteiltoleranzen
DGaO-Proceedings 114, 36 (2 S.) (2013)

Hong, C., Gu, D., Dai, D., Gasser, A., Weisheit, A., Kelbassa, I., Zhong, M., Poprawe, R.:
Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures
Opt. Laser Technol. 54, 98-109 (2013)

Ivanov, D. S., Kuznetsov, A.I., Lipp, V. P., Rethfeld, B., Chichkov, B. N., Garcia, M. E., Schulz, W.:
Short laser pulse nanostructuring of metals: direct comparison of molecular dynamics modeling and experiment
Appl. Phys. A, 111 (3), 675-687 (2013)

Janssen, S., Uchtmann, H., Kelbassa, I.:
Determination of the bore hole diameter by analyzing process emissions
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miama/Fl., USA, Paper 701 (2013)

Jauer, L., Meiners, W., Poprawe, R.
Selective Laser Melting of biodegradable metals
European Cells and Materials, Vol. 26, Suppl. 5 (2013)

Kumstel, J., Kirsch, B.:
Polishing titanium- and nickel-based alloys using cw-laser radiation
Physics Procedia 41, 362–371 (2013)

Larsen, C., Giesberts, M., Nyga, S., Fitzau, O., Jungbluth, B., Hoffmann, H. D., Bang, O.:
Gain-switched all-fiber laser with narrow bandwidth
Opt. Expr. 21 (10), 12302-12308 (2013)

Li, J., Yang, S. H., Meissner, A., Hofer, M., Hoffmann, D.:
A 200 W innoslab Tm:YLF laser
Laser Phys. Lett. 10, 55002 (5 S.) (2013)

Liu, J., Dahmen, M., Ventzke, V., Kashaev, N., Poprawe, R.:
The effect of heat treatment on crack control and grain refinement in laser beam welded β-solidifying TiAl-based alloy
Intermetallics 40, 65-70 (2013)

Maischner, D., Barz, J., Weisheit, A., Backes, G.,
Gut gerüstet für langen Einsatz
Form + Werkzeug 2013, 25-27 (2013)

Masurtschak, S., Friel, R. J., Gillner, A., Ryll, J., Harris, R. A.:
Fiber laser induced surface modification/manipulation of an ultrasonically consolidated metal matrix
J. Mat. Proc. Technol. 213 (10), 1792-1800 (2013)

Mehlmann, B., Olowinsky, A., Thuilot, M., Gillner, A.:
Spatially modulated laser beam micro welding of CuSn6 and nickel-plated DC04 steel for battery applications
Proc. of Lamp2013 - the 6th Int. Congr. on Laser Advanced Materials Processing (7 S.) (2013)

Meineke, G., Flitsch, D., Lenenbach, A., Noll, R.:
Fluorescence sensors for parallel measurements in multichannel microfluidic devices covering the full channel cross sections
Proc. SPIE 8615, 86151C-1 (7 S.) (2013)

Meissner, A., Kucirek, P., Li, J., Hoefer, M., Hoffmann, D.:
Simulations and experiments on resonantly-pumped singe-frequency Erbium lasers at 1.6 µm
Solid State Lasers XXII, Proc. SPIE 8599, H1-8 (2013)

Meissner, A., Li, J., Lopez-Perez, I., Yang, S., Hoefer, M., Hoffmann, D.: 200-W Tm:YLF INNOSLAB laser
Solid State Lasers XII, Proc. SPIE 8599, C1-7 (2013)

Merkt, S., Hinke, C., Dalaee, M., Salminen, A., Purtonen, T., Bültmann, J.:
Compressive behavior of lattice structures in solid shells manufactured by SLM
14th NOLAMP Conference Gothenburg, Sweden,  August 26th - 28th, 2013, pp. 91-100 (2013)

Mingareev, I., Bonhoff, T., El-Sherif, A. F., Meiners, W., Kelbassa, I., Biermann, T., Richardson, M.
Femtosecond laser post-processing of metal parts produced by laser additive manufacturing
J. Laser Appl. 25 (5), 052009 (4 S.) (2013)

Nastasi, G., Wester, R., Colla, V., Noll, R.:
Determining inclusion size distributions from OES/PDA data
Metallurgical analysis/Yejin-fenxi : shuangyuekan 33, (3), 9-13 (2013)

Noll, R., Hölters, S., Kämmerling, J., Lenenbach, A.:
Laserabstandssensoren messen die Dicke von Walzbändern
QZ 58 (10), 44-47 (2013)

Nüsser, C., Sändker, H., Willenborg, E.:
Pulsed laser micro polishing of metals using dual-beam technology
Phys. Procedia 41, 346-355 (2013)

Oezmert, A., Drenker, A., Nazery, V.:
Detectability of penetration based on weld pool geometry and process emission spectrum in laser welding of copper
Physics Procedia  41, 502-507 (2013)

Papadakis, L., Loizou, A., Risse, J., Bremen, S., Schrage, J.:
A thermo-mechanical modeling reduction approach for calculating shape distortion in SLM manufacturing for aero engine components
In: High Value Manufacturing . Eds.: P. J. Bartolo et. al., pp. 613-618 (2013)

Petraviciute-Lötscher, L., Schneider, W., Rußbüldt, P., Gronloh, B., Hoffmann, H.-D., Kling, M. F., Apolonski, A.:
Direct low-harmonic generation in gas at MHz repetition rate
Lasers and Electro-Optics Europe (CLEO EUROPE/IQEC), 2013 Conference on and International Quantum Electronics Conference, Munich 12-16 May 2013. 1 S. (2013)

Petring, D.:
Developments in hybridisation and combined laser beam welding technologies
In: Handbook of laser welding technologies
Ed. by S. Katayama. Oxford [u.a.]: WP Woodhead Publ.
(Woodhead Publishing Series in Electronic and Optical Materials. Nr 41)
pp. 478-504 (2013)

Pupeza, I., Holzberger, S., Eidam, T., Esser, D., Weitenberg, J.,Rußbüldt, P., Rauschenberger, J., Limpert, J., Udem, Th., Tünnermann, A., Hänsch, T. W., Apolonski, A., Krausz, F., Fill, E. :
Compact high-repetition-rate source of coherent 100 eV radiation
Nature Photonics 7, (8), 608-612 (2013)

Pütsch, O., Bahrenberg, L., Loosen, P.:
Opto-mechatronisches System zur Erzeugung prozessangepasster Intensitätsverteilungen für die Lasermaterialbearbeitung
Mechatronik 2013, Aachen, 6.-8.3.2013, VDI (9 S.) (2013)

Pütsch, O., Temmler, A., Stollenwerk, J., Willenborg, E., Loosen, P.:
Active optical system for laser structuring of 3D surfaces remelting
Laser Beam Shaping XIV. Ed.: Andrew Forbes, Todd E. Lizotte.
Proc. SPIE, 8843, 88430D (8 S.) (2013)

Reinhard, R., Al Khawli, T., Eppelt, U., Meisen, T., Schilberg, D., Schulz, W., Jeschke, S.:
The contribution of virtual production intelligence to laser cutting planning processes
In: Enabling Manufacturing Competitiveness and Economic Sustainability. Proc. of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013). October 6th - 9th 2013, Munich
Heidelberg [u.a.]: Springer 2013. pp. 117-124

Reinhard, R., Eppelt, U., Al-Khawly, T., Meisen, T., Schilberg, D., Schulz, W., Jeschke, S.:
How virtual production intelligence can improve laser-cutting planning processes
22nd International Conference on Production Research, ICPR 2013. July 28th - August 1st, 2013, Iguassu Falls, Brazil. Iguassu Falls, 2013. 7 S.

Reininghaus, M., Wortmann, D., Cao, Z., Hoffmann, J. M., Taubner, T.:
Fabrication and spectral tuning of standing gold infrared antennas using single fs-laser pulses
Opt. Expr. 21 (26), 32176-32183 (2013)

Reininghaus, M., Wortmann, D., Cao, Z., Taubner, T.:
fs-laser fabricated gold antennas for infrared near-field enhancement
Proceedings of LAMP2013 - the 6th International Congress on Laser Advanced Materials Processing. Washington, D.C.: The Catholic Univ. of America, 5 S., (2013)

Risse, J., Golebiewski, C., Meiners, W., Wissenbach, K.:
Einfluss der Prozessführung auf die Rissbildung in mittels SLM hergestellten Bauteilen aus der Nickelbasislegierung IN738LC
Tagungsband der Fachmesse und Anwendertagung für Rapid-Technologie, Erfurt : Desotron Verl. Ges. (7 S.) (2013)

Rösner, A.:
Der Laser verbindet Kunststoffe mit metallischen Bauteilen
MM Maschinenmarkt Nr. 18, 36-38 (2013)

Rösner, A., Olowinsky, A.:
Laser welding of polymers
Ind. Laser Sol. 28 (1), 29-31 (2013)

Russ, S., Siebert, C., Eppelt, U., Hartmann, C., Faißt, B., Schulz, W.:
Picosecond laser ablation of transparent materials
Proc. SPIE 8608, E86080E-1 (11 S.) (2013)

Sandner, T., Kimme, S., Grasshoff, T., Todt, U., Graf, A., Tulea, C., Lenenbach, A., Schenk, H.:
Micro-scanning mirrors for high-power laser applications in laser surgery
Int. Conf. on Optical MEMS and Nanophotonics 2013, August 18-22, 2013, Kanazawa, Japan, pp.83-84 (2013)

Schaefer, D., Schnitzler, D., Kelbassa, I.:
Fundamental processes of refractive index modifications during femtosecond laser waveguide writing
Advanced Fabrication Technologies for Micro/Nano Optics and Photonics VI. Proc. SPIE 8613, X1-7 (2013)

Schaefer, D., Gottmann, J., Hermans, M., Ortmann, J., Kelbassa, I.:
High speed micro scanner for 3D in-volume laser micro-processing
Laser-based Micro- and Nanopackaging and Assembly VII.
Proc. SPIE 8608 (6 S.) (2013)

Scharun, M., Fricke-Begemann, C., Noll, R.:
Laser-induced breakdown spectroscopy with multi-kHz fibre laser for mobile metal analysis tasks — A comparison of different analysis methods and with a mmobile spark-discharge optical emission spectroscopy apparatus
Spectrochimica Acta Part B: Atomic Spectroscopy, Volume 87, 198-207 (2013)

Scharun, M., Noll, R.:
Analyse von Sekundärrohstoffen durch mikrowellenunterstützte Laser-Emissionsspektroskopie. In: Innovative Technologien für Ressourceneffizienz in rohstoffintensiven Produktionsprozessen Hrsg.: J. Woidasky [u.a.]. Stuttgart: Fraunhofer Verlag, pp. 38-51 (2013)

Schneider, F., Wolf, N., Petring, D.:
High power laser cutting of fiber reinforced thermoplastic polymers with cw- and pulsed lasers
Physics Procedia  41, 408-413 (2013)

Schniedenharn, M., Belting, M., Santos Batista, R. J., Meiners, W., Weisheit, A.:
Micro scale laser based additive manufacturing for metals
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miama/Fl., USA, M101 (6 S.) (2013)

Schwarz, T., Berens, M., Gronenborn, S., Kolb, J., Loosen, P., Miller, M., Mönch, H., Wester, R.:
Analysis of single-mode effieciency of electrically pumped VECSELs
Proc. SPIE 8606, 86060 H (10 S.) (2013)

Scotti, G., Trusheim, D., Kanninen, P., Naumenko, D., Schulz-Ruhtenberg, M., Snitka, V., Kallio, T., Franssila, S.:
Picosecond laser ablation for silicon micro fuel cell fabrication
J. Micromech Microeng. 23, 055021, 14 S. (2013)

Shah, L., Bonhoff, T., El-Sherif, A., Kadwani, P., Gebhardt, M., Gaida, C., Mingareev, I., Richardson, M.
Backside surface machining of silicon wafers using a nanosecond Tm:fiber MOPA System
CLEO 2013, June 9 - 14, San Jose, Calif. (2 S.) (2013) 

Shah, L., Bonhoff, T., Ferhat, T., El-Sherif, A. F., Ramme, M., Willis, C. C. C., Baudelet, M., Kadwani, P., Gaida, C., Gebhardt, M., Mingareev, I., Richardson, M.:
Silicon backside machining using a nanosecond 2 μm Tm:fiber laser
Proc. SPIE  8612, 861207 (6 S.) (2013)

Steger, M., Hartmann, C., Beckemper, S., Holtkamp, J., Gillner, A.:
Fabrication of hierarchical structures by direct laser writing and multi-beam-interference
J. Laser Micro/Nanoeng. 8 (3), 210-215 (2013)

Steger, M., Hartmann, C., Beckemper, S., Holtkamp, J., Gillner, A.:
Fabrication of hierarchical structures by direct laser writing and multi-beam-interference
Proc. of LAMP2013 - the 6th International Congress on Laser Advanced Materials Processing (6 S.) (2013)

Stollenwerk, J.:
Energie- und ressourceneffiziente Funktionalisierung temperaturempfindlicher Substrate
Laser Mag. 2013, 8-9 (2013)

Strotkamp, M., Munk, A., Jungbluth, B., Dahlhoff, K., Jansen, P., Broch, S., Gomm, S., Bachner, M., Fuchs, H., Holland,, Hofzumahaus, A.:
Design of a rugged 308 nm tunable UV laser for airborne LIF measurements on top of Zeppelin NT
Solid State Lasers XXII, Proc. SPIE 8599, L1-10 (2013)

Strotkamp, M., Witte, U., Munk, A., Hartung, A., Gausmann, S., Hengesbach, S., Traub, M., Hoffmann, H.-D., Hoeffner, J., Jungbluth, B.:
Broadly tunable, diode pumped Alexander laser
Advanced Solid State Lasers (ASSL) 2013, 27.10.2013 – 1.11.2013, Paris. paper: ATu3A.42 (2013)

Sun, M., Eppelt, U., Russ, S., Hartmann, C., Siebert, C., Zhu, J., Schulz, W.:
Numerical analysis of laser ablation and damage in glass with multiple picosecond laser pulses
Opt. Expr. 21 (7), 7858-7867 (2013)

Sun, M., Eppelt, U., Schulz, W., Zhu, J.:
Role of thermal ionization in internal modification of bulk borosilicate glass with picosecond laser pulses at high repetition rates
Opt. Mat. Expr. 3 (10), 1716-1726 (2013)

Thombansen, U., Diatlov, A.:
Sensor system for spatially resolved observation of the melt pool in Selective Laser Melting
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miami/Fl., USA, Orlando: Fl.: LIA (31 S.) (2013)

Thombansen, U., Purrio, M., Buchholz, G., Hermanns, T., Molitor, T., Willms, K., Schulz, W., Reisgen, U.:
Measurement of process variables in melt based manufacturing processes
In: ISMTII 2013 - The 11th International Symposium on Measurement Technology and Intelligent Instruments, Aachen /Braunschweig,
July 1st-5th 2013 (6 S.) (2013)

Tulea, C., Caron, J., Wahab, H., Gehlich, N., Hoefer, M., Esser,
D., Jungbluth, B., Lenenbach, A., Noll, R.:
Highly efficient nonthermal ablation of bone under bulk water with a   frequency-doubled Nd:YVO₄ picosecond laser
Proc. SPIE 8565, 85656 E-1 (11 S.) (2013)

Uchtmann, H., Kelbassa, I.:
Cax process chain for laser drilling of tool molds
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miama/Fl., USA, Paper 702 (2013)

Unger, A., Brand, T., Bull, S., Larkins, E. C., Traub, M., Hengesbach, S., Uusimaa, P., Vilokkinen, V., Crump, P., Erbert, G., Luclas-Leclin, G., Georges, P., Rataj, T., Deichsel, E.:
The Bridle project: High brilliance diode lasers for industrial applications
High Power Diode Lasers and Systems Conference (HPD)
West Midlands, United Kingdom,16-17 Oct. 2013
Piscataway, N.J.: IEEE 2013, pp. 28-29

Ungers,.M., Rolser, R., Abels, P., Krämer, S.:
FGPA-Programmed detection of seam defects for the application of laser brazing
In: Proceedings of LAMP2013 - the 6th Int. Congr. on Laser Advanced Materials Processing (6. S.) (2013)

Ungers, M., Rolser, R., Abels, P.:
Hardware based analysis and process control for laser brazing applications
Physics Procedia  41, 524-530 (2013)

Vossen, G., Hermanns, T., Schüttler, J.:
Analysis and optimal control for free melt flow boundaries in laser cutting with distributed radiation
ZAMM Zs. Angew. Math. Mech. (Early view) 20 S. (2013)

Weisheit, A., Dobrzanski, D., Valentin, M., Ocylok, S., Wissenbach, K., Kelbassa, I.:
Laser additive manufacturing - a new manufacturing technology for parts of composites with refractory metals?
18. Plansee-Seminar 2013. Int. Conf. on Refractory Metals and Hard Materials, RM 39, 1-12 (2013)

Weisheit, A., Gasser, A., Backes, G., Jambor, T., Pirch, N., Wissenbach, K.:
Direct laser cladding, current status and future scope of application
In: Laser-assisted fabrication of materials. Ed.: J. D. Majumdar, I. Manna. Heidelberg [u.a.]: Springer.
Springer Series in Materials Science. Vol. 161. ISBN 978-3-642-28358-1, 221-239 (2013)

Wester, R.:
Physical optics methods for laser and non-linear
optics simulations
Adv. Optical Technol. 2 (3) 247-255 (2013)

Wester, R., Bäuerle, A.:
Light shaping for illumination
Adv. Opt. Technol. 2 (4) 301-311 (2013)

Willenborg, E., Ross, I., Kumstel, J., Flemmer, J.:
Werkzeugmaschine für das Laserpolieren
wt Werkstattstechnik online 103 (6) 465-469 (2013)

Wilkes, J., Hagedorn, Y.-C., Meiners, W., Wissenbach, K.:
Additive manufacturing of ZrO₂-Al₂O₃ ceramic components by selective laser melting
Rapid Prototyping J. 19 (1) 51-57 (2013)

Wissinger, A., Olowinsky, A., Gillner, A., Poprawe, R.:
Laser transmission bonding of silicon to silicon with metallic interlayers for wafer-level packaging
Microsyst. Technol. 19 (5), 669-673 (2013)

Witte, U., Hengesbach, S., Traub, M., Strotkamp, M., Jungbluth, B., Hoffmann, D.:
High brightness diode laser module in the red spectral range for pumping applications
High Power Diode Lasers and Systems Conference (HPD),
West Midlands, United Kingdom,16-17 Oct. 2013
Piscataway, N.J.: IEEE 2013. pp. 30-31

Zhu, P., Li, D., Liu, Q., Chen, J., Fu, S., Shi, P., Du, K., Loosen, P.:
39.1 µJ picosecond ultraviolet pulses at 355 nm with 1 MHz repeat rate
Opt. Lett. 38 (22), 4716-4718 (2013)

Zhuang, F., Jungbluth, B., Gronloh, B., Hoffmann, H.-D., Zhang, G.:
Dual-wavelength, continuous-wave Yb:YAG laser for high-resolution photothermal common-path interferometry
Appl. Opt. 52 (21), 5171-5177 (2013)

Zibner, F., Ryll, J., Holtkamp, J., Gillner, A.:
High precision 2.5D laser cutting of thin nitinol and polyurethane for medical applications
ICALEO, 32th International Congress on Applications of Lasers & Electro-Optics : October 6-10, 2013, Miama/Fl, USA, M4154 (6 S.) (2013)

Banyay, M., Juschkin, L., Bersch, E., Franca, D., Liehr, M., Diebold, A.:
Cross characterization of ultrathin interlayers in HfO₂ high-k stacks by angle resolved x-ray photoelectron spectroscopy, medium energy ion scattering, and grazing incidence extreme ultraviolet reflectometry
J. Vacuum Sci. Technol. A 30, Nr. 4, 041506-1-13 (2012)

Bäuerle, A., Bruneton, A., Westerm R., Stollenwerk, J., Loosen, P.:
Algorithm for irradiance tailoring using multiple freeform optical surfaces
Opt. Expr. 20, Nr. 13, 14477-14485 (2012)

Bello-Silva, . S., Wehner, M., de Paula Eduardo, C., Lampert, F., Poprawe, R., Hermans, M., Esteves-Oliveira, M.:
Precise ablation of dental hard tissues with ultra-short pulsed lasers
Lasers in Medical Science, 14 S. (2012)

Benk, M., Bergmann, K.:
Brilliance scaling of discharge sources for extreme-ultraviolet and soft x-ray radiation for metrology applications
J. Micro/Nanolith. MEMS MOEMS 11, Nr 2, 021106-1-7, (2012)

Berlin, M., Rösner, A., Schneider, F.:
Laser radiation as all-round tool for composite parts
Kunststoffe 102, Nr. 5, 20-23 (2012)

Bobzin, K., Kopp, N., Warda, T., Schulz, C., Rolink, G., Weisheit, A.:
Investigation of wear and corrosion protection of AlSi20 coatings produced by thermal spraying and laser cladding on AZ31B
Thermal Spray 2012: Proceedings of the International Thermal Spray Conference (ITSC), (ASM International), 6 S. (2012)

Bozkurt, A., Lassner, F., O'Dey, D. [u.a.]:
The role of microstructured and interconnected pore channels in a collagen-based nerve guide on axonal regeneration in peripheral nerves
Biomaterials 33, 1363-1375 (2012)

Brandl, E., Heckenberger, U., Holzinger, V., Buchbinder, D.:
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Mat. Design 34, 159-169 (2012)

Brecher, C., Schmitt, R., Loosen, P., Guerrero, V., Pyschny, N., Pavim, A., Gatej, A.:
Self-optimizing approach for automated laser resonator alignment
Opt. Lasers Eng. 50, 287-292 (2012)

Bremen, S., Buchbinder, D., Meiners, W., Wissenbach, K.:
Selective Laser Melting - a manufacturing method for series production
Proc. Direct Digital Manufacturing Conference DDMC 2012. Berlin, March 14-15, 2012, 6 S. (2012)

Bremen, S., Schrage, J., Meiners, W., Wissenbach, K.:
High power Selective Laser Melting - further steps towards series production
Proceedings of the International Conference on Additive Manufacturing, 9-10 July, 2012, Loughborough, UK, 19 S. (2012)

Bremus-Koebberling, E., Beckemper, S., Koch, B., Gillner, A.:
Nano structures via laser interference patterning for guided cell growth of neuronal cells
Journal of Laser Applications 24, Nr. 4, 042013-1-6 (2012)

Bremus-Köbberling, E., Gillner, A., Avemaria, F., Réthoré, C., Bräse, S.:
Photochemistry with laser radiation in condensed phase using miniaturized photoreactors
Beilstein J. Org. Chem. 8, 1213-1218 (2012)

Bremus-Köbberling, E., Leonards, H., Naderi, M.:
Spatially selective modification of polymeric scaffolds with markers for MR-Imaging
J. Tissue Engl. Regen. Med. 6, 316-316 (2012)

Brose, S., Danylyuk, S., Juschkin, L., Dittberner, C., Bergmann, K., Moers, J., Panaitov, G., Trellenkamp, St. , Loosen, P., Grützmacher, D.:
Broadband transmission masks, gratings and filters for extreme ultaviolet and soft X-ray lithography
Thin Solid Films 520, 5080-5085 (2012)

Bruneton, A., Bäuerle, A., Traub, M., Wester, R., Loosen, P.:
Irradiance tailoring with two-sided, Fresnel-type freeform optics
In: Nonimaging Optics: Efficient Design for Illumination and Solar Concentration IX, San Diego, California, USA , August 12, 2012
Proc. SPIE 8485, 1-7 (2012)

Bürgermeister, L., Mikalauskaite, R., Vossen, G., Schulz, W.:
Antimikrobielle Photodynamische Therapie - Analyse des Ablaufs der chemischen Prozesse
In: Automatisierungstechnische Verfahren für die Medizin.
10. Workshop 29./30. März 2012, pp.13-14 (2012)

Crump, P., Hengesbach, S., Witte, U., Hoffmann, H.-D., Erbert, G.,
Tränkle, G.:
High-power diode lasers optimized for low-loss smile-insensitive external spectral stabilization
IEEE Photon. Technol. Lett. 24, Nr. 8, 703-705 (2012)

El-Giar, E. M., Asle Zaeem, M., El Kadiri, H., Florea, R. S., Rhee, H., Bienvenu, Y., Dahmen, M., Malot, T., Cherkaoui, M.:
On laser welding of thin steel sheets
Science and Technology of Welding and Joining 17(7), 571-580 (2012)

Engelghardt, S., Refle, O., Wehner, M.:
Method for the fabrication of macroscopic high resolution scaffolds by the combination of inkjet-printing and laser initiated polymerization
J. Tissue Engl. Regen. Med. 6, 299-200 (2012)

Eppelt, Urs:
Elektronenschauer im Glas
Laser Community, 2/2012, pp. 24-25 (2012)

Eppelt, U., Russ, S., Hartmann, C., Sun, M., Siebert, C., Schulz, W.:
Diagnostic and Simulation of PS-Laser Cutting
Proc. of the 31st Int. Congress on Applications of Lasers & Electro-Optics, ICALEO September 23-27, 2012, Anaheim, CA, USA, Paper M504, 10 S. (2012)

Faidel, H., Gronloh, B., Winzen, M., Liermann, E., Esser, D., Morasch, V., Luttmann, J., Leers, M., Hoffmann, D.:
Passive alignment and soldering technique for optical components
Proc. SPIE 8235, 10 S. (2012)

Flege, C., Vogt, F., Höges, S., Jauer, L., Borinski, L., Schulte, V., Hoffmann, R., Poprawe, R., Meiners, W., Jobmann, M., Wissenbach, K., Blindt, R.:
Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting
Journal of Materials Science: Materials in Medicine,
DOI: 10.1007/s10856-012-4779-z (2012)

Flemmer, J., Pirch, N., Witzel, J., Gasser, A., Wissenbach, K., Kelbassa, I.:
LACAM3D, CAM solution for tool path generation for build up of complex aerospace components by laser powder deposition
Proceedings of the 37th International MATADOR Conference, 61-64 (2012)

Fornaroli, C., Holtkamp, J., Gillner, A.:
Laser-Beam helical drilling of high quality micro holes
Proc. of the 31st Int. Congress on Applications of Lasers & Electro-Optics, ICALEO September 23-27, 2012, Anaheim, CA, USA
LIA Pub. 615: Vol. 105, 10 S. (2012)

Freiberger, R., Hauck, J., Lvovsly, D., Adam, R., Danylyuk, S., Juschkin, L.:
Gateable micro channel plate detector for extreme ultraviolet radiation with high temporal resolution
JARA FIT Jülich-Aachen Research Alliance - Annual Report 2011
145-146 (2012)

Gatej, A., Pyschny, N., Loosen, P., Brecher, C.:
Robot-based Resistance Soldering of Optical Components
Soldering & Surface Mount Technology Vol. 24 No. 2, 112-119
(2012)

Gatej, A., Richmann, A., Pütsch, O., Loosen, P.:
Thermo-Optical (TOP) analysis of transmissive elements for laser-systems
Proceedings of SPIE 8490 (2012)

Gatej, A., Wasselowski, J., Loosen, P.:
Thermo-optical (TOP) analysis by coupling FEM and ray tracing
Proceedings of SPIE 8429, 84290E-1-8 (2012)

Gatej, A., Wasselowski, J., Loosen, P.:
Using adaptive weighted least squares approximation for coupling thermal and optical simulation
Applied Optics 51, No. 28, 6718–6725 (2012)

Gilfert, C., Pavelescu, E.-M., Reitmaier, J. P., Westphalen, T., Traub, M., Michel, N., Krakowski, M.:
15-W fiber-coupled quantum-dot pump module
IEEE Photon. Technol. Lett. 24, Nr. 12, 1030-1032 (2012)

Gottmann, J., Hermans, M., Ortmann, J.:
Digital photonic production of micro structures in glass by in-volume selective laser-induced etching using a high speed micro scanner
Physics Procedia 39, 534-541 (2012)

Gottmann, J., Hermans, M., Hörstmann-Jungemann, M., Schaefer, D.:
Selective laser etching of sapphire & glasses
Ind. Laser Sol. Manuf. 27(2), 8-13 (2012)

Gronloh, B., Russbueldt, P., Schneider, W., Jungbluth, B., Hoffmann, H.-D.:
High average power sub-picosecond pulse generation at 515 nm by extracavity frequency doubling of a mode-locked Innoslab MOPA
Proc. SPIE 8235, 10 S. (2012)

Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Santos Batista, R. J., Wissenbach, K., Poprawe, R.:
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
Acta Mat. 60, Nr. 9, 3849-3860 (2012)

Gu, D., Meiners, W., Wissenbach, K., Poprawe, R.:
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Int. Mat. Rev., 32 S. (2012)

Hambach, N., Hartmann, C., Holtkamp, J., Gillner, A.:
Stability limits of laser drilled hole arrays on large areas
J. Laser Appl. 24, Nr. 3, 5 S. (2012)

Hawelka, D., Stollenwerk, J., Pirch, N., Wissenbach, K.:
Improving Surface Properties by Laser-based Drying, Gelation and Densification of Printed Sol-Gel Coatings
Proc. 16th International Coating Science and Technology Symposium,
September 9-12, 2012, Midtown Atlanta, GA

Heidrich, S., Richmann, A., Willenborg, E.:
Development of a laser based process chain for manufacturing free form optics
Proc. SPIE 8433, 14 S. (2012)

Heidrich, S., Richmann, A., Willenborg, E.:
Development of manufacturing freeform glass optics with laser radiation
Optical Fabrication and Testing (OFT) Monterey, Ca., June 25, 2012
3 S. (2012)

Heidrich, S., Richmann, A., Willenborg, E.:
Optics fabrication with a laser based process chain
Optical Fabrication and Testing (OF & T) Monterey, Ca.,
June 25, 2012. 3 S. (2012)

Herbert, S., Banyay, M., Maryasov, A. P., Hochschulz, F., Paschen, U., Vogt, H., Juschkin, L.:
Quantum efficiency determination of a novel CMOS design for fast imaging applications in the extreme ultraviolet
IEEE Transact. Electron Dev. Online first 4 S. (2012)

Hermans, M., Gottmann, J., Schiffer, A.:
In-situ diagnostics on fs-laser induced modification of glasses for selective etching
Proc. SPIE 8244, 10 S. (2012)

Holzberger, S., Pupeza, I., Esser, D., Weitenberg, J., Carstens, H.,
Eidam, T., Russbüldt, P., Limpert, J., Udem, T., Tünnermann, A.,
Hänsch, T., Krausz, F., Fill, E.:
Sub-25 nm High-Harmonic Generation with a 78-MHz Repetition Rate Enhancement Cavity
Proc. CLEO: QELS-Fundamental Science, Optical Society of America, QTh5B.7 (2012)

Hopmann, C., Michaeli, W., Eilbracht, S., Bobzin, K., Bagcivan, N., Theiß, S., Hartmann, C., Holtkamp, J., Gillner, A., Mayer, J.:
Extrusion embossing of hydrophobic films - a study on process characteristics and surface properties
Zeitschrift Kunststofftechnik 8, Nr. 3, 302-330 (2012)

Janzen, C., Hoffmann, K.:
Optical measurements for the rational screening of protein crystallization conditions
In: Handbook of Biophotonics Vol. 3: Photonics in Pharmaceutics, Bioanalysis and Environmental Research. Jürgen Popp (Editor), Valery V. Tuchin (Editor), Arthur Chiou (Editor), Stefan H. Heinemann (Editor). Weinheim: WILEY-VCH, 257-287 (2012)

Jaschinski, E., Wehner, M.:
CdSe-ZnS quantum dots as temperature sensors during thermal coagulation of bovine serum albumin (BSA) solder
Appl. Phys. A Online first, 6 S. (2012)

Katzy, V., Giesberts, M., Fitzau, O., Hoffmann, D.,:
Single mode all-fiber pulse-pumped Raman amplifier for picosecond pulses
Advanced Solid-State Photonics (ASSP), San Diego, California, Jan. 29^th - Feb. 1^st, 3 S. (2012)

Kelbassa, I., Gasser, A., Meiners, W., Backes, G., Müller, B.:
High speed LAM
Proceeding of the 37th International MATADOR Conference, 5 S. (2012)

Leers, M., Winzen, M., Liermann, E., Faidel, H., Westphalen, T., Miesner, J., Luttmann, J., Hoffmann, D.:
Highly precise and robust packaging of optical components
Proc. SPIE 8244, 6 S. (2012)

Leers, M., Winzen, M., Liermann, E., Faidel, H., Westphalen, T., Miesner, J., Luttmann, J., Hoffmann, D.:
Pick and align - high precision active alignment of optical components
IEEE Electronic Components & Technology Conference, San Diego,
pp. 208-212 (2012)

Legall, H., Blobel, G., Stiel, H., Sandner, W., Seim, C., Takman, P., Martz, D. H., Selin, M., Vogt, U., Hertz, H. M., Esser, D., Sipma, H., Luttmann, J., Höfer, M., Hoffmann, H. D., Yulin, S., Feigl, T., Rehbein, S., Guttmann, P., Schneider, G., Wiesemann, U., Wirtz, M., Diete, W.:
Compact x-ray microscope for the water window based on a
high brightness laser plasma source
Opt. Express, OSA, 20, 18362-18369 (2012)

Leonards, H., Schmitz, D., Pich, A., Bremus-Köbberling, E.:
Light triggered drug release
J. Tissue Engl. Regen. Med. 6, 324-324 (2012)

Meissner, A., Kucirek, P., Hoffmann, H.-D.:
Resonantly-pumped single-frequency Er:YLuAG-laser with pulsed emission at 1645.2 nm (air)
Proceedings of the Europhoton 2012 Conference, Stockholm (2012)

Meixner, M., Stollenwerk, J., Wissenbach, K.:
Production of silver conductive paths by laser processing
Proc. of the 31st Int. Congress on Applications of Lasers & Electro-Optics, ICALEO September 23-27, 2012, Anaheim, CA, USA (2012)

Merkt, S., Hinke, C., Gradl, P.
Technology-adapted product design methods for laser based Additive Manufacturing
Proceedings of Fraunhofer Direct Digital Manufacturing Conference, Berlin,
5 S. (2012)

Merkt, S., Hinke, C., Schleifenbaum, H., Voswinckel, H.
Geometric complexity analysis in an integrative technology evaluation model (ITEM) for selective laser melting (SLM)
South African Journal of Industrial Engineering, Vol 23 (2), pp 97-105 (2012)

Meyer, W., Engelhardt, S., Novosel, E., Elling, B., Wegener, M., Krüger, H.:
Soft polymers for building up small and smallest blood supplying systems by stereolithography
J. Funct. Biomater. 3, 257-268 (2012)

Michaeli, W., Eilbracht, S., Scharf, M., Hartmann, C., Bobzin, K., Bagcivan, N., Theiß, S.:
Application of variothermal heating concepts for the production of microstructured films using the extrusion embossing process
J. Polymer Eng. 32, 95-101 (2012)

Mincuzzi, G., Schulz-Ruhtenberg, M., Vesce, L., Reale, A., Di Carlo, A., Gillner, A., Brown, T.:
Laser processing of TiO₂ films for dye solar cells:
a thermal, sintering, throughput and embodied
energy investigation
Progress in Photovoltaics: Research and Applications
Wiley Online Library DOI: 10.1002/pip.2261
(2012)

Mincuzzi, G., Zardetto, V., Vesce, L., Schulz-Ruhtenberg, M., Gillner, A., Reale, A., di Carlo, A., Brown, T.:
Raster scanning laser and UV processing of nanocrystalline TiO₂ films for sintering in dye solar cells: Device performance, throughput and embodied energy
MRS Online Proceedings Library 1447, 6 S. (2012)

Müller, S., Pries, H., Dilger, K., Ocylok, S., Weisheit, A., Kelbassa, I.:
Reparaturschweißen von Druckgießformen durch das Laserauftragschweißen
Giesserei 56, Nr. 5, 9 S. (2012)

Ocylok, S., Kelbassa, I.:
Study on cracks in laser direct-cladded titanium layer on low carbon steel
Acta Metallurgica Sinica Vol. 48 No. 2, pp.142–147 (2012)

Petring, D., Molitor, F., Schneider, F., Wolf, N.:
Diagnostics, modeling and simulation: Three keys towards mastering the cutting process with fiber, disk and diode lasers
Physics Procedia, Volume 39, Pages 186-196 (2012)

Petring, D., Schneider, F., Wolf, N., Molitor, T., Nazery, V.:
Cutting with 1 micron wavelength lasers: An intermediate assessment of speculations, simulations, diagnostics and facts
Proc. of the 7th Stuttgart Laser Technology Forum SLT’12 (2012)

Petring, D.:
Fundamental and practical aspects of fiber laser cutting sheet metal
IIW Commission I Intermediate Meeting 8th May 2012, Aachen, Germany, 26 S. (2012)

Petring, D., Schneider, F., Wolf, N.:
Some answers to frequently asked questions and open issues of laser beam cutting
Proc. of the 31st Int. Congress on Applications of Lasers & Electro-Optics, ICALEO September 23-27, 2012, Anaheim, CA, USA (2012)

Pirch, N., Keutgen, S., Gasser, A., Wissenbach, K., Kelbassa, I.:
Modeling of coaxial single and overlap-pass cladding with laser radiation
Proceedings of the 37th International MATADOR Conference, pp. 377-380 (2012)

Pupeza, I., Holzberger, S., Eidam, T., Esser, D., Weitenberg, J., Carstens, H., Rußbüldt, P., Limpert, J., Udem, T., Tünnermann, A., Hänsch, T. W., Krausz, F., Fill, E.:
Generation of Coherent sub-20 nm XUV Radiation at 78 MHz via
Cavity-Based HHG
Proc. of the 18th International Conference on Ultrafast Phenomena (2012)

Pütsch, O., Loosen, P.:
Electro-optically actuated liquid-lens zoom
Proc. SPIE 8429, 8 S. (2012)

Pütsch, O., Stollenwerk, J., Loosen, P.:
Active, multi-aperture beam integrator for application adapted laser materials processing
DGaO Proceedings 113. Jahrestagung, 29. Mai - 2. Juni 2012, Eindhoven, Niederlande. Erlangen: Dt. Ges. F. Angew. Optik, 2 S., ISSN 1614-8436 (2012)

Pütsch, O., Stollenwerk, J., Kogel-Hollacher, M., Traub, M.:
Annular beam shaping system for advanced 3D laser brazing
Adv. Opt. Technol. Online first DOI 10.1515/aot-2012-0040. 6 S. (2012)

Reininghaus, M., Wortmann, D., Finger, J., Faley, O., Poprawe, R., Stampfer, C.:
Laser induced non-thermal deposition of ultrathin graphite
Appl. Phys. Lett. 100, Nr. 15, 1-3 (2012)

Richmann, A., Willenborg, E., Wissenbach, K.:
Laser polishing of lenses of fused silica and BK7
Proceedings OF&T Optical Fabrication and Testing Monterey 2012,
Washington D.C., OSA, 3 S. (2012)

Richmann, A., Willenborg, E., Wissenbach, K.:
Polishing of illumination optics with CO₂ laser radiation
DGaO Proceedings 113. Jahrestagung, 29. Mai - 2. Juni 2012, Eindhoven, Niederlande. Erlangen: Dt. Ges. F. Angew. Optik, 2 S., ISSN 1614-8436 (2012)

Riester, DA,, Özmert, A., Ungers, M., Wehner, M.:
What you see is what you print: Single cell transfer
J. Tissue Engl. Regen. Med. 6, 374-374 (2012)

Rolink, G., Weisheit, A., Wissenbach, K., Schulz, C., Bobzin, K., Kopp, N., Warda, T.:
Impact of different coating systems on corrosion and wear resistance generated by laser cladding
9th International Conference on Magnesium Alloys and their Applications, July 8-12, 2012, Vancouver, B.C., Canada, 6 S. (2012)

Schaefer, M., Schulz-Ruhtenberg, M., Holtkamp, J., Gillner, A,:
Comparison of laser ablation of transparent conductive materials on flexible and rigid substrates
Proc. LOPE-C, Munich, 39-43 (2012)

Seiler, N., Bremus-Köbberling, E., Leonhäuser, D., Gillner, A.:
Gradients for cell guidance – functionalization by UV-laser-irradiation
J. Tissue Engl. Regen. Med. 6, 373-373 (2012)

Sturm, V., Eilers, D., Werheit, P., Chiarotti, U., Volponi, V., De Miranda, U. Zani, M., Makowe, J.:
Elemental monitoring of steel scrap loading an electrical arc furnace
Metallurgical Analysis Vol. 32 (6): 18-23 (2012)

Sun, M., Eppelt, U., Russ, S., Hartmann, C., Siebert, C., Zhu, J., Schulz, W.:
Laser ablation mechanism of transparent dielectrics with picosecond laser pulses
Proc. SPIE 8530, 9 S. (2012)

Teki, R., Kadaksham, A. J., House, M. [et. al.]:
Alternative smoothing techniques to mitigate EUV substrate defectivity
Proc. SPIE 8322, 1-12 (2012)

Temmler, A., Willenborg, E., Wissenbach, K.:
Designing surfaces by laser remelting
Proc. of 7th International Conference on MicroManufacturing, Evanston,
8 S. (2012)

Temmler, A., Willenborg, E., Wissenbach, K.:
Laser polishing
SPIE Photonics West – LASE, 21-26 January 2012, Moscone Center, San Francisco, California, USA, Proc. SPIE 8243, 13 S. (2012)

Thombansen, U., Beckers, M., Buchholz, G., Hermanns, T., Molitor, T., Willms, K., Reisgen, U., Schulz, W.:
Signal processing for self-optimising manufacturing systems in laser-cutting and gas-metal-arc-welding
In: 1st Joint International Symposium on System-Integrated Intelligence, 114-116 (2012)

Traub, M., Hengesbach, S., Hoffmann, D.:
High Power Diode Lasers and Their Applications: Recent Developments and Future Trends
Laser and Tera-Hertz Science and Technology
OSA Technical Digest (online) (Optical Society of America),
paper MF1A.4. (2012)

Uchtmann, H., Dietrich, J., Kelbassa, I.:
Pulse shaping during laser percussion drilling by using fiber laser radiation
ICALEO: 31. Int. Congress on Applications of Lasers and Electro- Optics, September 23-27, 2012, Anaheim, CA, USA, 5 S.

Uhlmann, E., Langmack, M., Schimmelpfennig, T.-M., Fornaroli, C.:
Laser and micro electrical discharge drilling - Hybrid machine tool and process analysis for combined machining
WT Online Ausgabe 6, 347-325 (2012)

Vedder, C., Stollenwerk, J., Wissenbach, K.:
Process monitoring and control for laser-based thin film treatment
ICALEO: 31. Int. Congress on Applications of Lasers and Electro- Optics, September 23-27, 2012, Anaheim, CA, USA, 7 S.

Wehner, M., Thombansen, U., Raven, N., Kühn, C., Schillberg, S.:
Light-weight optical sensor for standoff detection of fluorescent bisensors
Proceedings 7th Security Research Conference, Future Security, Bonn, Germany, September 4-6, 2012, Berlin: Springer 2012,
Communications in Computer and Information Science, Vol. 318, 4 S.
ISBN 978-3-642-33160-2 (2012)

Wester, R.,  Bruneton, A., Bäuerle, A.,  Stollenwerk, J.,  Loosen, P.:
Irradiance tailoring for extended sources using a point-source freeform design algorithm
Optical Systems Design 2012. Barcelona, Spain, November 26, 2012, Proc. SPIE  8550, 85502 
(2012)

Wissinger, A., Olowinsky, A., Gillner, A., Poprawe, R.:
Laser transmission bonding of silicon with metallic interlayers for wafer-level packaging
Microsyst. Technol. Online first DOI 10.1007/s00542-012-1636-4.
5 S. (2012)

Wissinger, A., Schmitz, M., Olowinsky, A., Gillner, A., Poprawe, R.:
Laser transmission bonding of silicon with titanium and copper layer for wafer-level packaging
22nd ECS Meeting, ECS Transact. 50(7): Semiconductor Wafer Bonding 12: Science, Technology and Applications 189-198 (2012)

Wortmann, D., Koch, J., Reininghaus, M., Unger, C., Hulverscheidt, C., Ivanov, D., Chichkov, B. N.:
Experimental and theoretical investigation on fs-laser-induced nanostructure formation on thin gold films
J. Laser Appl. 24, 4 (Special ed). 6 S. (2012)

Wu, S., Huang, J., Beckemper, S., Gillner, A., Wang, K., Bubeck, C.:
Block polymer supramolecular assemblies hierarchically structured by three-beam interference laser ablation
J. Mat. Chem. 22, Nr. 11, 4989-4995 (2012)

Wueppen, J., Nyga, S., Taubner, T., Jungbluth, B.:
Ultrafast mid-IR laser source with a tuning range from 9 to 16 microns based on nonlinear frequency conversion
In: mirsens2, International Workshop on Opportunities and Challenges
in Mid-Infrared Laser-Based Gas Sensing, October 18-20, 2012, Wroclaw
pp. 18-19 (2012)

Bäuerle, A., Schnitzler, C., Wester, R., Kirsten, M., Schlüter, H., Tewes, M., Laschefski, H., Loosen, P.:
Optical system design for a reflector-based LED food lighting module.
Proc. SPIE 8123, 812306, 7 S., 2011

Beckemper, S., Huang, J., Gillner, A., Wang, K.:
Generation of periodic micro- and nano-structures by parameter-controlled three-beam laser interference technique.
J. Laser Micro/Nanoeng. 6, Nr. 1, 49-53, 2011

Beckmann, D., Esser, D., Gottmann, J.:
Characterization of channel waveguides in Pr:YLiF4 crystals fabricated by direct femtosecond laser writing.
Appl. Phys. B – Lasers Optics, Online first, 6 S., DOI: 10.1007/s00340-011-4406-6, 2011

Beckmann, D., Schnitzler, D., Schaefer, D., Gottmann, J., Kelbassa, I.
Beam shaping of laser diode radiation by waveguides with arbitrary cladding geometry written with fs-laser radiation.
Opt. Expr. 19, Nr 25, 25418-25425, 2011

Binetruy, C., Clement, S., Deleglise, M., Franz, C., Knapp, W., Oumarou, M., Renard, J., Roesner, A. :
Glue-free assembly of glass fiber reinforced thermoplastics using laser light.
Proc. SPIE 8065, 80650U, 7 S., 2011

Bobzin, K., Bagcivan, N., Gillner, A., Hartmann, C., Holtkamp, J., Michaeli, W., Klaiber, F., Schöngart, M., Theiß, S.:
Injection molding of products with functional surfaces by micro-structured, PVD coated injection molds.
Prod. Eng. 5, Nr. 4, 415-422, 2011

Bobzin, K., Bagcivan, N., Theiß, S., Hartmann, C., Holtkamp, J., Gillner, A., Michaeli, W., Hopmann, C., Eilbracht, S., Schöngart, M., Scharf, M.:
Manufacturing of micro-structured parts for mass production purposes.
Proc. of the Int. Symp. on Assembly and Manufacturing ISAM 2011, 25.5.-27.5. 2011, Tampere, Finland. 8 S. ISBN 978-1-61284-343-8 (digital)

Bobzin, K., Bagcivan, N., Ewering, M., Gillner, A., Beckemper, S., Hartmann, C., Theiß, S.:
Nano structured physical vapor deposited coatings by means of picosecond laser radiation.
J. Nanosci. Nanotechnol. 11, 1-7, 2011

Bobzin, K., Bührig-Polaczek, A., Michaeli, W., Poprawe, R., Bagcivan, N., Beckemper, S., Eilbracht, S., Gillner, A., Hartmann, C., Holtkamp, J., Ivanov, T., Klaiber, F., Scharf, M., Schöngart, M., Theiß, S.:
Verkürzung von Prozessketten zur Herstellung von Bauteilen mit funktionalen Oberflächen mit Mikro-und Nanostrukturen.
In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer, 672-734, 2011

Brecher, C., Kampker, A., Klocke, F. [u.a.]:
Business and technology cases.
In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer, 1059-1156, 2011

Bremen, S., Buchbinder, D., Meiners, W., Wissenbach, K.:
Mit Selective Laser Melting auf dem Weg zur Serienproduktion?
Laser Technik J. 8, Nr. 6, 24-28, 2011

Bruneton, A., Bäuerle, A., Loosen, P., Wester, R.:
Freeform lens for an efficient wall washer.
Proc. SPIE 8167, 816707, 9 S., 2011

Buchbinder, D., Meiners, W.:
Generative Fertigung von Aluminiumbauteilen für die Serienproduktion.
Abschlussbericht AluGenerativ, Fkz.: 01RIO639A-D. Aachen: Fraunhofer Institut f. Lasertechnik, 148 S., 2011

Buchbinder, D., Schleifenbaum, H., Heidrich, S., Mainers, W., Bültmann, J.:
High Power Selective Laser Melting (HP SLM) of aluminium parts.
Phys. Proced. 12, 271-278, 2011

Buchbinder, D., Schilling, G., Meiners, W., Pirch, N., Wissenbach, K.:
Untersuchung zur Reduzierung des Verzugs durch Vorwärmung bei der Herstellung von Aluminiumbauteilen mittels SLM.
RT ejournal - Forum für Rapid Technologie 8, 1-15, 2011

Danylyuk, S., Mussler, G., Brose, S., Juschkin, L., Panaitiv, G., Grützmacher, D., Loosen, P.
Self-organized MBE growth of Ge quantum dots directed by extreme ultraviolet interference lithography.
JARA FIT Jülich-Aachen Research Alliance - Annual Report 2010
40-50, 2011

Diatlov, A., Schleifenbaum, H., Meiners, W., Wissenbach, K., Bültmann, J.:
Towards surface topography: Quantification of Selective Laser Melting (SLM) built parts.
In: Innovative developments in virtual and physical prototyping. Boca Raton: CRC Pr. 2011. pp .595-607. ISBN 978-0415684187

Dong, C., Zhong, M., Huang, T., Ma, M., Wortmann, D., Brajdic, M., Kelbassa, I.:
Photodegradation of methyl orange under visible light by micro-nano hierarchical Cu2O structure fabricated by hybrid laser processing and chemical dealloying.
Appl. Mater. Interfaces 3, 4332-4338, 2011

Engelhardt, S., Hu, Y., Seiler, N., Riester, D., Meyer, W., Krüger, H., Wehner, M., Bremus-Köbberling, E., Gillner, A.:
3D-microfabrication of polymer-protein hybrid structures with a q-switched microlaser.
J. Laser Micro/Nanoeng. 6, Nr.1, 54-58, 2011

Engelhardt, S., Hoch, E., Borchers, K., Meyer, W., Krüger, H., Tovar, G. E. M., Gillner, A.:
Fabrication of 2D protein microstructures and 3D polymer-protein hybrid microstructures by two-photon polymerization.
Biofabrication 3, 025003, 9 S., 2011

Esser, D., Rezaei, S.,Li, J., Herman, P. R., Gottmann, J.:
Time dynamics of burst-train filamentation assisted femtosecond laser machining in glasses.
Opt. Expr. 19, Nr. 25, 25632-25642, 2011

Farahzadi, A., Lebert, R., Benk, M., Juschkin, L., Herbert, S., Maryasov, A.:
Contributions to EUV mask metrology infrastructure.
Proc. SPIE 7545, 754505, 5 S., 2011

Flemmer, J., Pirch, N., Wissenbach, K., Gasser, A.:
Auftragen nach Ist-Daten.
Werkzeug & Formenbau Nr. 5, 42-45, 2011

Fletcher, J.:
3D-Geometrien laserpolieren.
Maschine + Werkzeug 9,1-2, 2011

Frank, S., Ungers, M., Rolser, R.:
Coaxial control of aluminium and steel laser brazing processes.
Phys. Proced. 12, Part A, 752-760, 2011

Franz, C., Abels, P., Rolsner, R., Becker, M.:
Energy input per unit length - high accuracy kinematic metrology in laser material processing.
Phys. Proced. 12, Part B, 411-420, 2011

Franz, C., Abels, P., Merz, M., Singpiel, H., Trein, J.:
Real-time process control by machine vision.
ICALEO 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. Paper 205, 6 S., 2011

Franz, C., Singpiel, H., Trein, J.:
Tracking the contour.
Laser Technik J. 8, Nr. 5, 41-44, 2011

Freiberger, R., Hauck, J., Reininghaus, M., Wortmann, D., Juschkin, L.:
Time resolved EUV pump-probe microscopy of fs-LASER induced nanostructure formation.
Proc. SPIE 8076, 80760K, 7 S., 2011

Fricke-Begemann, C., Noll, R., Monteith, A., Maddison, A., Dürr, M.:
Feasibility-study on laser-induced breakdown spectroscopy for pre-screening of environmental samples.
Proc. 33rd ESARDA Annual Meeting, Budapest, 16.-20. Mai 2011. 7 S., 2011

Fricke-Begemann, C., Graf, N.:
Impiego del laser nel riciclaggio dei metalli.
Applicazioni Laser Nov/Dic, 44-47, 2011

Fricke-Begemann, C., Noll, R., Wotruba, H., Schmitz, C.,
Laser-based material analysis for sorting of minerals.
In: Applications of sensor-based sorting in the raw material industry. Eds.: Thomas Pretz, Hermann Wotruba, Karl Nienhaus. Aachen: Shaker 2011. (Schriftenreihe zur Aufbereitung und Veredlung.  Bd 42.) ISBN 978-3-8440-05,65-70 2011

Fricke-Begemann, C., Strauß, N., Noll, R.:
Laser-based methods for chemical composition analysis of particulate emissions from steelmaking processes.
Proc. of the CETAS 2011, Luxembourg, 17.-19. Mai 2011. OC19, 131-138, 2011

Fricke-Begemann, C., Graf, N.:
Lasereinsatz im Recycling.
Optik & Photonik 6, Nr. 3, 47-50, 2011

Funck, M. C., Loosen, P.:
Reducing asymmetric imaging errors through selective assembly and tolerance desensitization.
Proc. SPIE 8131, 8 S., 2011

Gatej, A., Thombansen, U., Loosen, P.:
Kombinierte thermo-optische Simulation für optische Systeme .
DGaO-Proc. 112, 2 S., 2011

Gatej, A., Pyschny, N., Morasch, V., Loosen, P., Brecher, C.:
Self-optimization of robot-based resistance soldering for the assembly of optical elements in solid-state laser systems.
Conf. on Lasers and Electro-Optics, CLEO/Europe EQEC, Munich, 22-26 May 2011. 1 S.

Gatej, A., Thombansen, U., Loosen, P.:
Simulation des thermischen Linseneffekts in hochbelasteten Lasersystemen.
Photonik 5, 54-56, 2011

Gatej, A., Dolkemeyer, J., Loosen, P.:
Stress analysis of extensively and partially soldered optical components.
Optics Lasers Eng. 49, Nr. 7, 758-763, 2011

Genov, S., Riester, D., Hirth, T., Tovar, G., Borchers, K., Weber, A.:
Preparation and characterisation of dry thin native protein trehalose films on titanium-coated cycloolefin polymer (COP) foil generated by spin-coating/drying process and applied for protein transfer by Lase-Induced-Forward-Transfer (LIFT).
Chem. Eng. Process. 50, Nr. 5-6, 556-564, 2011

Göttmann, A., Diettrich, J., Bergweiler, G., Bambach, M., Hirt, G., Loosen, P., Poprawe, R.:
Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts.
Prod. Eng. 5, Nr. 3, 263-271, 2011

Gu, DD., Hagedorn, Y. C., Meiners, W., Wissenbach, K., Poprawe, R.:
Selective Laser Melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance.
Surf. Coat. Technol. 205, Nr. 10, 3285-3292, 2011

Hambach, N., Hartmann, C., Holtkamp, J., Gillner, A.:
Stability limits of laser drilled hole arrays on large areas.
ICALEO. 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. M50, 895-899, 2011

Hauck, J., Freiberger, R., Juschkin, L.:
Performance benchmark of a gateable microchannel plate detector for extreme ultraviolet radiation with high temporal resolution.
Proc. SPIE 8076, 80760R, 7 S., 2011

Hawelka, D., Stollenwerk, J., Pirch, N., Büsing, L., Wissenbach, K.:
Laser based inline production of wear protection coating on temperature sensitive substrates.
Phys. Proced. 12, Part A, 490-498, 2011

Heidrich, S., Willenborg, E., Richmann, A.:
Development of a laser based process chain for manufacturing freeform optics.
Phys. Proced. 12, 519-528, 2011

Heinemann, S., Lewis, B., Regaard, B., Schmidt, T.:
Single emitter based diode lasers with high brightness, high power and narrow linewidth.
Proc. SPIE 7918, 79180M, 6 S., 2011

Hengesbach, S., Witte, U., Traub, M., Hoffmann, D.:
Simulation and analysis of volume holographic gratings integrated in collimation optics for wavelength stabilization.
Proc. SPIE 7918, 79180A, 13 S., 2011

Hoerstmann-Jungemann, M., Dobrzanski, D., Schaefer, D., Kelbassa, I.:
Functionalization of sapphire surfaces using fs-laser radiation and selective etching.
ICALEO. 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. M 1203, 1105-1110, 2011

Holtkamp, J., Hartmann, C., Gillner, A., Beckemper, S., Dohrn, A., Eifel, S.:
Mikrostrukturieren mit Zukunft.
Laser Technik J. 8, Nr 2, 37-40, 2011

Ivanov, D. S. , Shultz (Schulz), W.:
MD-based modeling of swift heavy ion beam nanostructuring of dielectrics.
8th EBSA European Biophysics Congress, August 23rd-27th 2011, Budapest, Hungary. Eur. Biophys. J. 40 (Suppl. 1), P-266, p.107, 2011

Ivanov, T., Bührig-Polaczek, A., Vroomen, U., Hartmann, C., Holtkamp, J., Gillner, A., Bobzin, K., Bagcivan, N., Theiss, S.:
Investment casting of surfaces with microholes and their possible applications.
Light Metals 2011. Proc. of the technical sessions presented by the TMS Aluminum Committee at the TMS 2011 Annual Meeting & Exhibition. Warrendale, Pe.: TMS, Minerals, Metals & Materials Society. Chichester: Wiley, 705-709, 2011

Ivanov, T., Bührig-Polaczek, A., Vroomen, U., Hartmann, C., Holtkamp, J., Gillner, A., Bobzin, K., Bagcivan, N., Theiss, S.:
Replication of specifially microstructured surfaces in A356-alloy via lost wax investment casting.
J. Micromech. Microeng. 21, 85026-85026, 2011

Jahnke, J., Mahlmann, D. M., Jacobs, P., Priefer, U. B.:
The influence of growth conditions on the cell dry weight per unit biovolume of Klebsormidium flaccidum (Charophyta), a typical ubiquitous soil alga.
J. Appl. Phycol. 23, 655-664, 2011

Jungbluth, B., Nyga, S., Pawlowski, E., Fink, T. Wüppen, J.:
Efficient frequency conversion of pulsed microchip and fiber laser radiation in PPSLT.
Proc. SPIE 7912, 79120K, 8 S., 2011

Juschkin, L., Maryasov, A., Herbert, S., Aretz, A., Bergmann, K., Lebert, R.:
EUV dark-field microscopy for defect inspection.
AIP Conf. Proc. 1365, 265-268, 2011

Kaierle, S., Dahmen, M., Güdükkurt, O.:
Eco-efficiency of laser welding applications.
Proc. SPIE 8065, 80650T, 10 S., 2011

Kind, H., Olowinsky, A., Gehlen, E.
Laserprozess statt Ofenlötung.
Laser + Produktion, 30-32, 2011

Lebert, R., Farahzadi, A., Diete, W., Schäfer, D., Phiesel, C., Wilhein, T., Herbert, S., Maryasov, A., Juschkin, L., Esser, D., Hoefer, M., Hoffmann, D.:
Actinic EUV-Mask metrology: tools, concepts, components.
Proc. SPIE 7985, 79850B, 6 S., 2011

Letsche, S., Jacobs, P., Pluntke, M., Tränkle, S., Gong, H., Marti, O., Mahlmann, D.-M., Loosen, P., Volkmer, D.:
3D characterization of microstructured poly(methacrylic acid) thin films via Mach-Zehnder interference microscopy.
Thin Solid Films 519, Nr. 22, 8100-8108, 2011

Li, C., Gu, D., Shen, Y., Meng, G., Li, Y.:
In situ synthesis of Ti5Si3 matrix nanocomposites reinforced with nanoparticles by high-energy mechanical alloying.
Adv. Eng. Mat. 13, Nr. 5, 418-425, 2011

Lindner, M., Hoeges, S., Meiners, W., Wissenbach, K., Smeets, R., Telle, R., Poprawe, R., Fischer, H.:
Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique.
J. Biomed. Mat. Res. A 97 A, Nr. 4, 466-472, 2011

Löhring, J., Schlösser, M., Hoffmann, H.-D.:
Compositionally tuned Nd:(YxLu1-x)3Ga5O12-laser at 935 nm for H2O-dial systems.
Proc. SPIE 7912, 79121N, 10 S., 2011

Löhring, J., Meissner, A., Hoffmann, D., Fix, A., Ehret, G., Alpers, M.:
Diode-pumped single-frequency-Nd:YGG-MOPA for water-vapor DIAL measurements: design, setup and performance.
Appl. Phys. B 102, 917-935, 2011

Loosen, P., Funck, M. C., Gatej, A., Morasch, V., Stollenwerk, J.:
Integrative Produktion von Mikro-Lasern.
In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer, 1068-1114, 2011

Loosen, P., Schmitt, R., Brecher, C., Müller, R., Funck, M., Gatej, A., Morasch, V., Pavim, A., Pyschny, N.:
Self-optimizing assembly of laser systems.
Prod. Eng. 5, Nr. 4, 443-451, 2011

Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., Bültmann, J.:
Design of an optical system for the in situ process monitoring of Selective Laser Melting (SLM).
Phys. Proc. 12, 683-690, 2011

Lubna, N., Auner, G., Patwa, R., Herfurth, H., Newaz, G.:
Role of cleaning methods on bond quality of Ti coated glass/imidex system.
Appl. Surf. Sci. 257, Nr. 10, 4749-4753, 2011

Mans, T., Dolkemeyer, J., Russbüldt, P., Schnitzler, C.:
Highly flexible ultrafast laser system with 260W average power.
Proc. SPIE 7912, 79120M, 6 S., 2011

Maryasov, N., Maryasova, T., Maryasov, A.:
Estimation of quality of 3D holographic images by means of stereogrammetry.
Proc. SPIE 8075, 8 S., 2011

Maryasov, A., Herbert, S., Juschkin, L., Lebert, R., Bergmann, R.:
EUV actinic mask blank defect inspection: results and status of concept realization.
Proc. SPIE 7985, 79850C, 8 S., 2011

Maryasov, A., Herbert, S., Juschkin, L., Brose, S., Aretz, A., Heiss, A., Trellenkamp, S., Loosen, P.
EUV dark-field microscopy for nanoscale defect inspection.
JARA FIT Jülich-Aachen Research Alliance - Annual Report 2010,
49-50, 2011

Merkt, S., Hinke, C., Schleifenbaum, H., Voswinckel, H.:
Integrative Technology Evaluation Model (ITEM) for Selective Laser Melting (SLM).
Adv. Mat. Res. 337, 274-280, 2011

Michaeli, W., Schöngart, M., Klaiber, F., Beckemper, S.:
Production of superhydrophobic surfaces using a one-step variothermal injection moulding process.
Micro Nanosystems 3, 222-225, 2011

Mikhaylovska, A. S., Mikhailovskaya, L. V.:
Diffraction of light in intermediate regime of acoustooptical interaction at oblique incidence.
Opt. Spectrosc. 110, Nr. 2, 287-293, 2011

Mingareev, I., Berlich, R., Eichelkraut, T. J., Herfurth, H., Heinemann, S., Richardson, M. C.:
Diffractive optical elements utilized for efficiency enhancement of photovoltaic modules.
Opt. Expr. 19, Nr. 12, 11397-11404, 2011

Morsbach, C., Höges, S., Meiners, W.:
Modeling the selective laser melting of polylactide composite materials.
J. Laser Appl. 23, Nr. 1, pp. 012005-1-012005-8, 2011

Nastasi, G., Wester, R., Colla, V., Noll, R.:
Determining inclusion size distributions from OES/PDA data.
Proc. of the CETAS 2011, Luxembourg, 17.-19. Mai 2011, 495-501, 2011

Nüsser, C., Wehrmann, I., Willenborg, E.:
Influence of intensity distribution and pulse duration on laser micro polishing.
Phys. Proced. 12, 462-471, 2011

Ocylok, S., Weisheit, A., Kelbassa, I.:
Increased wear and oxidation resistance of titanium aluminide alloys by laser cladding.
Adv. Mat. Res. 278, 515-520, 2011

Olowinsky, A., Boglea, A.:
Extending the process limits of laser polymer welding with high-brilliance beam sources (recent status and prospects of POLYBRIGHT).
Proc. SPIE 7921, 792107, 15 S., 2011

Petring, D., Schneider, F., Dickler, H.:
Drei in einem Kopf.
Laser Technik J. 8, Nr. 4, 28-32, 2011

Petring, D.:
Laser cutting.
LIA Today 19, Nr. 1, 6-7, 2011

Petring, D., Nazery Goneghany, V.:
Parameter dependencies of copper welding with multi-kW lasers at 1micron wavelength.
Phys. Proced. 12, 95-104, 2011

Petring, D.:
Schneller schneiden auf Maschinen mit fasergekoppelten Lasern.
MM Maschinenmarkt Nr. 13, 32-34, 2011

Petring, D.:
Un'applicazione "matura" che ha ancora qualcosa da dire.
Lamiera 9 (Settembre), 86-88, 2011

Poprawe, R.:
Catalyzing innovation: The Fraunhofer Society and Institute for Laser Technology.
OPN Optics & Photonics News 21, Nr. 2, 10-11, 2011

Pütsch, O., Morasch, V., Funck, M., Loosen, P.:
Echtzeitfähige Laserstrahlregelung zur Kompensation thermischer Effekte.
DGaO-Proc. 112, 2 S., 2011

Pütsch, O., Morasch, V., Loosen, P.:
Kompensation thermischer Effekte im Laserresonator durch aktive Regelung der Spotgröße in Echtzeit.
Internationales Forum Mechatronik. Tagungsband Cham 21.-22. September 2011, 331-340, ISBN 978-3-00-035785-5, 2011

Queudeville, Y., Ivanov, T., Vroomen, U., Bührig-Polaczek, A., Elgeti, S., Probst, M., Behr, M., Windeck, C., Michaeli, W., Nussbaum, C., Hinke, C.:
Design methodology for modular tools.
Prod. Eng. 5, 351-358, 2011

Reininghaus, M., Finger, J., Faley, O., Wortmann, D., Stampfer, C.:
Non-thermal ablation of graphite by ultrashort pulsed fs-laser radiation.
ICALEO. 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. N 102, 8 S., 2011

Richmann, A., Willenborg, E., Wissenbach, K.:
Laser polishing of spherical quartz lenses.
2nd EOS Conference on Manufacturing of Optical Components (EOSMOC), Munich, Germany: 23 May - 25 May 2011, 2 S, 2011

Richmann, A., Heidrich, S.:
Polieren und Abtragen von Quarzglas mit CO2-Laserstrahlung.
2. Workshop Glasbearbeitung mit Laserstrahlung, 12. April 2011, Erlangen, 21 S., 2011

Roesner, A., Scheik, S., Olowinsky, A., Gillner, A., Poprawe, R., Schleser, M., Reisgen, U.:
Innovative approach of joining hybrid components.
J. Laser Appl. 23, Nr. 3, 32007, 6 S., 2011

Roesner, A., Scheik, S., Olowinsky, A., Gillner, A., Reisgen, U., Schleser, M.:
Laser assisted joining of plastic metal hybrids.
Phys. Proced. 12, 373-380, 2011

Russbueldt, P., Hoffmann, H.-D., Mans, T., Poprawe, R.:
1100 W Yb:YAG femtosecond Innoslab amplifier.
Proc. SPIE 7912, 79120R, 9 S., 2011

Schaefer, D., Beckmann, D., Hoerstmann-Jungemann, M., Kelbassa, I.
Waveguides and markings inside transparent materials by fs-laser radiation.
ICALEO 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. M1004,5 S., 2011

Schaefer, M., Holtkamp, J., Gillner, A.:
Ablation of PEDOT/PSS with excimer lasers for micro structuring of organic electronic devices.
Synth. Met. 161, 1051-1057, 2011

Schaefer, M., Esser, A., Holtkamp, J., Gillner, A.:
Laser ablation of transparent conducting materials for organic electronics.
Proc. of Large-Area, Organic and Polymer Electronics Convention 2011 (LOPE-C 11), June 2011, Frankfurt/M. Frankfurt/M.: Organics Electronics Association, 159-163, 2011

Schaeffer, R. D., Schaefer, D.:
New method for structuring brittle materials.
Micromanufacturing 4, Nr. 4, 14-15, 2011

Schleifenbaum, H., Diatlov, A., Hinke, C., Bültmann, J., Voswinckel, H.:
Direct photonic production: towards high speed additive manufacturing of individualized goods.
Prod. Eng. 5, 359-371, 2011

Schmitt, R., Loosen, P., Brecher, C., Pavim, A., Funck, M., Morasch, V., Gatej, A., Pyschny, N., Haag, S.:
Self-optimizing flexible assembly systems.
Comp. Technol. Appl. 2, Nr. 5, 333-343, 2011

Schmitz, G. J., Benke, S., Laschet, G., Apel, M., Prahl, U., Fayek, P., Konovalov, S., Rudnizki, J., Quade, H., Freyberger, S., Henke, T., Bambach, M., Rossiter, E. A., Jansen, U. Eppelt, U.:
Towards integrative computational materials engineering of steel components.
Prod. Eng. 5, Nr. 4, 373-382, 2011

Schuh, G., Aghassi, S., Orilski, S., Schubert, J., Bambach, M., Freudenberg, R., Hinke, C., Schiffer, M.:
Technology roadmapping for the production in high-wage countries.
Prod. Eng. 5, Nr. 4, 463-473, 2011

Schulz, M., Riedel, R., Willner, A., Mans, T., Schnitzler, C., Russbueldt, P., Dolkemeyer, J., Seise, E., Gottschall, T., Hädrich, S., Duesterer, S., Schlarb, H., Feldhaus, J., Limpert, J., Faatz, B., Tünnermann, A., Rossbach, J., Drescher, M., Tavella, F.:
Yb:YAG Innoslab amplifier: efficient high repetition rate subpicosecond pumping system for optical parametric chirped pulse amplification.
Opt. Lett. 36, Nr. 13, 2456-2458, 2011

Schulz-Ruhtenberg, M., Trusheim, D., Das, J., Krantz, S., Wieduwilt, J:
Influence of pulse duration in picosecond laser ablation of silicon nitride layers.
Energy Proced. 8, 614-619, 2011

Schulz-Ruhtenberg, M., Häberle, A., Russell, A., Hernández, J. L., Krantz, S.:
Influence of the pulse width for visible pulsed laser doping for crystalline solar cells using phosphosilicate glass.
J. Laser Micro/Nanoeng. 6, Nr. 1, 64-68, 2011

Sedao, X., Sarnet, T., Hernandez, J. L., Schulz-Ruhtenberg, M., Krantz, S.:
Edge isolation using ultra-short pulse laser materials with a top-hat beam profile.
Adv. Mat. Res. 321, 234-239, 2011

Sturm, V., Eilers, D., Werheit, P., Noll, R., Chiarotti, U., Volponi, V., Moroli, V., DeMiranda, U., Zanforlin, M., Zani, M., Makowe, J., Vestin, F., Bengtson, A.:
Elemental monitoring of steel scrap loading an electrical arc furnace.
Proc. of the CETAS 2011, Luxembourg, 17.-19. Mai 2011, 55-61, 2011

Taleb Araghi, B., Göttmann, A., Bergweiler, G., Saeed-Akbari, A., Bültmann, J., Zettler, J., Bambach, M., Hirt, G.:
Investigation on incremental sheet forming combined with laser heating and stretch forming for the production of lightweight structures.
Key Eng. Mat. 473, 919-928, 2011

Taleb Araghi, B., Göttmann, A., Bambach, M., Hirt, G., Bergweiler, G., Diettrich, J., Steiners, M., Saeed-Akbari, A.:
Review on the development of a hybrid incremental sheet forming system for small batch sizes and individualized production.
Prod. Eng. 5, Nr. 4, 393-404, 2011

Temmler, A., Willenborg, E., Wissenbach, K.:
Design surfaces by laser remelting.
Phys. Proced. 12, 419-430, 2011

Thombansen, U., Schüttler, J., Auerbach, T. [u.a.]:
Model-based self-optimization for manufacturing systems.
Proc. of the 2011 Int. Conf. on Concurrent Enterprising (ICE 2011). Eds.: K.-D. Thoben [u.a.] Piscataway, NJ : IEEE 2011. 9 S.

Thombansen, U., Auerbach, T.:
Der Weg zu Selbstoptimierenden Fertigungstechnologien.
In: Brecher, C. (Hrsg.): Integrative Produktionstechnik für Hochlohnländer, pp. 849-909, 2011

Trusheim, D., Schulz-Ruhtenberg, M., Smeets, M., Das, J., Wieduwilt, J.:
Influence of ultra-short pulse laser ablation of silicon nitride passivation layers on electronical cell properties.
26th European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC), Hamburg, Germany, 05.09.2011 - 08.09.2011. http://www.eupvsec-proceedings.com/proceedings?fulltext=trusheim&paper=12738

Trusheim, D., Schulz-Ruhtenberg, M., Baier, T., Krantz, S., Bauer, D., Das, J.:
Investigation of the influence of pulse duration in laser processes for solar cells.
Phys. Proc.12, 278-285, 2011

Vedder, C., Stollenwerk, J., Pirch, N., Wissenbach, K.:
Laser-based manufacturing of metallic conducting paths.
ICALEO 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. M804, 5 S., 2011

Vedder, C., Stollenwerk, J., Wissenbach, K., Pirch, N.:
Laser-based production of metallic conducting paths.
Phys. Proced. 12, 252-260, 2011

Vernaleken, A., Weitenberg, J., Sartorius, T., Russbueldt, P., Schneider, W., Stebbings, S. L., Kling, M. F., Hommelhoff, P., Hoffmann, H.-D., Poprawe, R., Krausz, F., Hänsch, T. W., Udem, T.:
Single-pass high-harmonic generation at 20.8 MHz repetition rate.
Opt. Lett. 36, Nr. 17, 3428-3430, 2011

Vossen, G., Schüttler, J.:
Mathematical modelling and stability analysis for laser cutting.
Math. Comp. Model. Dyn. Syst. ifirst, 1-25, 2011

Voswinckel, H., Schleifenbaum, H., Bambach, M., Hirt, G.:
Design for manufacture based on an integrated product process design model.
14th Int. Conference Sheet Metal, SheMet 2011: April 18, 2011-April 20, 2011, Leuven. pp. 799-806, 2011.
ISBN 978-3-03785-083-1

Weisheit, A., Jambor, T., Belting, M.:
Automatisiertes Mikro-Laserauftragschweißen mit dem Faserlaser.
Thermisches Beschichten mit laserbasierten Fertigungsverfahren, Dresden, 24. März 2011. 39 S., 2011

Weisheit, A., Bergweiler, G., Gebhardt, P., Wissenbach, K.:
Lokale Laserwärmebehandlung von hochfesten Stählen zur Verbesserung der Kaltumformeigenschaften.
31. EFB-Kolloquium Blechverarbeitung: Hochfeste und hybride Materialien, schnelle Umform- und Fügeverfahren. Bad Boll, 29. und 30.3.2011. Hannover: EFB 2011. ISBN 978-3-86776-363-9

Weisheit, A.:
Neue Werkstoffkonzepte für erhöhte Standzeiten und verbesserte Funktionalität von Werkzeugen und Formen.
Werkstoffe in der Fertigung Nr. 6, 4-5, 2011

Weitenberg, J., Rußbüldt, P., Eidam, T., Pupeza, I.:
Transverse mode tailoring in a quasi-imaging high-finesse femtosecond enhancement cavity.
Opt. Expr. 19, Nr. 10, 9551-9561, 2011

Werheit, P., Fricke-Begemann, C., Gesing, M., Noll, R.:
Fast single piece identification with a 3D scanning LIBS for aluminium cast and wrought alloys recycling.
J. Anal. At. Spectrom. 26, 2166-2174, 2011

Witzel, J., Schrage, J., Gasser, A., Kelbassa, I.:
Additive manufacturing of a blade-integrated disk by laser metal deposition.
ICALEO. 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. Paper 502, 7 S., 2011

Witzel, J., Stannard, S., Gasser, A., Kelbassa, I.:
Characterization of micro/macrostructure of laser cladded Inconel 718 with increased deposition rates as related to the mechanical properties.
ICALEO. 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. Paper 1401, 7 S., 2011

Witzel, J., Schopphoven, T., Gasser, A., Kelbassa, I.:
Development of a model for prediction of material properties of laser cladded Inconel 718 as related to porosity in the bulk material.
ICALEO. 30. Int. Congr. on Applications of Lasers and Electro-Optics, October 23-27, 2011. Paper 505, 8 S., 2011

Wortmann, D., Reinighaus, M., Finger, J., Dold, C., Russbueldt, P., Poprawe, R.:
The physics in applications of ultrafast lasers.
Proc. SPIE 8306, 830603, 6 S., 2011

Wueppen, J., Jungbluth, B., Taubner, T., Loosen, P.:
Ultrafast tunable mid IR source.
36th Ann.l Int. Conf. on Infrared, Millimeter, and Terahertz Waves. Houston, TX, USA, October 2-7, 2 S., 2011

Aden, M., Roesner, A., Olowinsky, A.
Optical characterization of polycarbonate: Influence of additives on optical properties
J. Polymer Science. Part B: Polymer Physics 48, Nr 4, 451-455
2010

Arens, J., Brouwer, P. de, Mager, I., Brucker, C., Schäfer, M., Jacobs, P., Schmitz-Rode, T.,Steinseifer, U.
Hemocompatibility tests on materials for a multi-tactile-sensor concept
Int. J. Artif. Org. 33, Nr 7, 480
2010

Bäuerle, A., Wester, R., Schnitzler, C., Loosen, P.
Design of efficient freeform lenses for mass-market illumination applications using hybrid algorithms
Proc. SPIE 7788, 778807 (10 S.)
2010

Baier, T., Schulz-Ruthenberg, M., Ametowobla, M., Schlenker, T., Manz, D.
Theoretical approach to estimate laser process parameters for drilling in crystalline silicon
Progr. Photovoltaics 18, Nr 8, 603-606, DOI:10.1002/pip.1012
2010

Banyay, M., Juschkin, L.
Spectral sharpening algorithm for a polychromatic reflectometer in the extreme ultraviolet
Appl. Spectrosc. 64, 401-408
2010

Bergweiler, G., Weisheit, A., Wissenbach, K., Kelbassa, I., Kopp, C.
Improvement of formability and performance of coated ultra-high-strength steels by local heat treatment using a high power diode laser
2. International Conference on Super-High Strength Steels. October 17-20, 2010, Peschiera del Garda (Verona), Italy. Milano: Assoziazione Italiana di Metallurgia. (CD). (12 S.)
2010

Boglea, A., Olowinsky, A., Gillner, A.
Extending the limits of laser polymer welding using advanced irradiation strategies.
J. Laser Micro/Nanoeng. 5, 138-144
2010

Brose, S., Danylyuk, S., Juschkin, L., Loosen, P., Moers, J., Trellenkamp, S., Panaitov, G., Wambach, K., Grützmacher, D.
High effenciency transmission masks for XUV nanostructuring and interference lithography.
JARA FIT Jülich-Aachen Research Alliance - Annual Report 2009,
43-44, 2010

Burbaum, B., Hong, C., Gasser, A., Kelbassa, I.
Advantages of adaptive optics for laser metal deposition in comparison to conventional optics
Pacific International Conference on Applications of Lasers and Optics (PICALO), Shangri-La Hotel, Wuhan, China, March 23-25, 2010. Paper 1008 (5 S.)
2010

Dahmen, M., Güdükkurt, O., Kaierle, S.
The ecological footprint of laser beam welding
Physics Procedia 5, Nr 2, 19-28
2010

Dolkemeyer, J., Funck, M., Morasch, V.
Flexible Automatisierung in der Produktion der Zukunft
RWTH-Themen Nr 1, 30-35
2010

Facchini, L., Höges, S., Magalini, E., Robotti, P., Wissenbach, K., Molinari, A.
Ductility of a Ti-6Al-4V alloy produced by Selective Laser Melting of prealloyed powders.
Rapid Prototyping Journal 16, Nr 6, 450-459
2010

Fiedler, W., Drenker, A., Kaierle, S.
Process monitoring and control during hybrid laser-arc welding of medium section steel sheets
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. Paper 205, (7 S.), 2010

Fix, A., Ehret, G., Löhring, J., Hoffmann, D., Alpers, M.
Water vapor differential absorption lidar measurements using a diode-pumped all-solid-state laser at 935 nm
Appl. Phys. B-Lasers and Optics DOI 10.1007/s00340-010-4310-5, (11 S.)
2010

Franz, C., Abels, P.
Measuring welding velocity at tool center point
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. Paper 1909 (8 S.)
2010

Fricke-Begemann, C., Jander, P., Wotruba, H., Gaastra, M.
Laser-based online analysis of minerals
Zement Kalk Gips Int. 63, 65-70
2010

Fricke-Begemann, C., Noll, R., Wotruba, H., Schmitz, C.
Lasergestützte Materialanalyse zur Sortierung mineralischer Rohstoffe
In: Sensorgestützte Sortierung 2010. Clausthal-Zellerfeld: GDMB 2010. Schriftenreihe d. GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik. H. 122, 49-50

Fricke-Begemann, C., Noll, R., Wotruba, H., Schmitz, C.
Schnell und flexibel. Fast and flexible
AT Aufbereitungs Technik - Mineral Processing 51, Nr 01-02, 50-59
2010

Funck, M. C., Dolkemeyer, J., Morasch, V., Loosen, P.
Design of a miniaturized solid state laser for automated assembly
Proc. SPIE 7721, 77210X (10 S.)
2010

Funck, M. C., Loosen, P.
The effect of selective assembly on tolerance desensitization
Proc. SPIE 7652, 76521M (9 S.)
2010

Ganser, D., Gottmann, J., Mackens, U., Weichmann, U.
Pulsed laser deposition of fluoride glass thin films
Appl. Surface Sci. 257, 954-959
2010

Gasser, A., Backes, G., Kelbassa, I., Weisheit, A., Wissenbach, K.
Laser additive manufacturing
Laser Technik J. 7, Nr 2, 58-63
2010

Gasser, A., Meiners, W., Weisheit, A., Willenborg, E., Stollenwerk, J., Wissenbach, K.
Maßgeschneiderte Oberflächen und Bauteile. Teil 1
Laser Technik J. 7, Nr 4, 47-53
2010

Gasser, A., Olaineck, C., Dupré, J., Eimann, K.
Maßgeschneiderte Oberflächen und Bauteile. Teil 2
Laser Technik J. 7, Nr 6, 22-26 2010

Genov, S., Thurow, I., Riester, D., Hirth, T., Borchers, K., Weber, A., Tovar, G. E. M.
Dry native protein assays on substrates by non-contact laser-induced-forward transfer LIFT process
Nanotech 2010, Anaheim/Ca., June 21-24, 2010. (4 S.)
2010

Genov, S., Riester, D., Hirth, T., Tovar, G., Borchers, K., Weber, A.
Preparation and characterisation of dry thin native protein trehalose films on titanium-coated cyclo-olefin polymer (COP) foil generated by spin-coating/drying process and applied for protein transfer by Laser-Induced-Forward-Transfer (LIFT)
Chem. Eng. Proc. Process Intensification, in Pr., doi: 10.1016/j.cep.2010.11.001
2010

Gillner, A.
Laser micro-structuring
In: YI Qin: Micromanufacturing Engineering and Technology, Norwich, N.Y.: W. Andrew Publ. 2010. pp. 59-67. ISBN 978-0-8155-1545-6

Gottmann, J.
Selektives Laserätzen von Glas und Saphir
Mikroproduktion 2010, Nr 6, 10-13
2010

Grden, M., Sakklettibutra, J., Vollertsen, F., Johnigk, C., Emonts, M., Brecher, C., Eckert, M.
Prozessauslegung beim laserstrahlunterstützten Stanzen
Laser Technik J. 7, Nr 6, 36-41
2010

Gronloh, B., Mans, T., Rußbüldt, P., Jungbluth, B., Wester, R., Hoffmann, D.
High Power SHG at 515 nm by means of extracavity frequency conversion of sub-picosecond pulses from a mode-locked Innoslab MOPA
Advanced Solid-State Photonics, OSA Technical Digest Series. Optical Society of America, San Diego, Ca., January 31-February 3, 2010. Paper AtuA13 (2 S.)
2010

Gu, D., Meiners, W., Hagedorn, Y.-C., Wissenbach, K., Poprawe, R.
Bulk-form TiCx/Ti nanocomposites with controlled nanostructure prepared by a new method: selective laser melting
J. Phys. D: Appl. Phys. 43, 295402 (7 S.)
2010

Gu, D., Meiners, W., Li, C., Shen, Y.
In situ synthesized TiC/Ti5Si3 nanocomposites by high-energy mechanical alloying: Microstructural development and its mechanism
Mater. Sci. Eng. A 527, 6340-6345
2010

Gu, D., Meiners, W., Hagedorn, Y.-C., Wissenbach, K., Poprawe, R.
Structural evolution and formation mechanisms of TiC/Ti nanocomposited prepared by high-energy mechanical alloying
J. Phys. D: Appl. Phys. 43, 135402 (11 S.)
2010

Hagedorn,Y. C., Wilkes, J., Meiners,W., Wissenbach, K., Poprawe, R.
Additive manufacturing of Al2O3-ZrO2-ceramic parts by Selective Laser Melting
5th Int. Conf. on Additive Manufacturing, July 5-9, 2010, Loughborough Univ., Leicestershire/UK. 2010. (16 S.)

Hagedorn, Y.-C., Wilkes, J., Meiners, W., Wissenbach, K., Poprawe, R.
Net shaped high performance oxide ceramic parts by Selective Laser Melting
Physics Procedia 5, Nr 2, 587-594
2010

Hawelka, D., Stollenwerk, J., Pirch, N., Wissenbach, K.
Laser based production of thin wear protection films
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. Paper 1709 (6 S.)
2010

Heyde, M., Roll, K., Kawalla, R., Bergweiler, G., Kaiser, J.
Local heat treatment of ultra-high-strength steels - an opportunity to extend the range of car body components. Tools and Technologies for the Processing of Ultrahigh Strength Steels 2010. 50th anniversary IDDRG (International Deep-Drawing Research Group) Conference, Graz, Austria, May 31-June 02, 2010
Graz: Verl. d. Techn. Univ. (10 S.), 2010. ISBN 978-3851251081

Höges, S., Lindner, M., Meiners, W., Smeets, R.
Bioresorable implants using Selective Laser Melting
21. Annual International Solid Freeform Fabrication Symposium - an Additive Manufacturing Conference. Austin, Tx., August 9-11, 2010. (13 S.)

Höges, S.
Wirtschaftliche Herstellung individueller Implantate
MM MASCHINENMARKT Nr 26, 20-23
2010

Hölters, S., Overbeck, J., Ederleh, L., Michaeli, W., Lenenbach, A., Noll, R.
Präzise Messtechnik für komplexe Mehrschichtfolien
Coating Int. 43, Nr 9, 6-12
2010

Holtkamp, J., Roesner, A., Gillner, A.
Advances in hybrid laser joining
Int. J. Adv. Manuf. Technol. 47, 923-930
2010

Hörstmann-Jungemann, M., Gottmann, J., Keggenhoff, M.
3D-Microstructuring of sapphire using fs-laser irradiation and selective etching
J. Laser Micro/Nanoeng. 5, 145-149
2010

Huang, J., Wu, S., Beckemper, Gillner, A.
All-optical fabrications of ellipsoidal caps on azobenzene functional polymers
Opt. Lett. 35, Nr 16. 2711-2713
2010

Huang, J., Beckemper, S., Gillner, A., Wang, K.
Tunable surface texturing by polarization-controlled three-beam interference
J. Micromech. Microeng. 20, 95004 (6 S.)
2010

Jahnke, J., Mahlmann, D. M.
Differences in the cellular dry weight per unit biovolume of Phormidium autumnale (Cyanobacteria) dependent on growth conditions
J. Appl. Phycol. 22, 117-122
2010

Jahnke, J., Mahlmann, D., Jacobs, P., Priefer, U.
The influence of growth conditions on the cellular dry weight per unit biovolume of Klebsormidium flaccidum (Charophyta), a typical ubiquitous soil alga
J. Appl. Phycol. DOI 10.1007/s10811-010-9557-z
2010

Kaierle, S.
Der ökologische Fußabdruck des Laserstrahlschweißens
Laser Magazin Nr 4, 6-7
2010

Kaierle, S., Kowalick, K., Regaard, B.
Laser process monitoring: The next generation approach in industrial application. PICALO 2010, March 23-25, 2010
4th Pacific International Conference on Applications of Lasers and Optics. Wuhan, Peoples Republic of China. (Paper 405)
2010

Kaierle, S., Ungers, M., Franz, C., Mann, S., Abels, P.
Understanding the laser process
Laser Technik J. 7, Nr 2, 49-52
2010

Kaul, R. A., Mahlmann, D. M., Loosen, P.
Mach-Zehnder interference microscopy optically records electrically stimulated cellular activity in unstained nerve cells
J. Microsc. 240, Pt 1, 60-74
2010

Kelbassa, I., Wortmann, D., Mans, T., Gottmann, J., Russbueldt, P., Weitenberg, J., Brajdic, M., Hermans, M., Beckmann, D., Poprawe, R.
High-power ultra-short pulse laser radiation: New sources as key enablers for emerging applications
Pacific International Conference on Applications of Lasers and Optics (PICALO), Shangri-La Hotel, Wuhan, China, March 23-25, 2010. (6 S.)
2010

Leers, M., Westphalen, T., Liermann, E.
Both sides cooled packages for high-power diode laser bars
60th Electronic Components and Technology Conference (ECTC), Las Vegas, June 1-4, 2010. Piscataway, N.J.: IEEE 2010. pp. 708-712

Leers,M., Liermann, E., Imgrund, P., Kramer, L., Volkert, J.
Expansion matched heat sinks made by mu-metal injection molding
Proc. SPIE 7583, 75830H (11 S.)
2010

Löhring, J., Meissner, A., Hoffmann, D., Fix, A., Ehret, G., Alpers, M.
Diode-pumped single-frequency-Nd:YGG-MOPA for water-vapor DIAL measurements: design, setup and performance
Appl. Phys. B-Lasers and Optics DOI 10.1007/s00340-00-4314-1 (19 S.)
2010

Maischner, D., Müller, H., Wissenbach, K., Weisheit, A., Biermann, T.
Korrosionsschutz der Schnittflächen von Blechen durch lokales Verzinken und Kunststoffbeschichten mit Laserstrahlung
9. Dresdener Korrosionsschutztage, Dresden 13.-14.10.2010. T. 1. 27-37
2010

Molitor, T., Schneider, F., Bußkamp, T., Thombansen, U., Eppelt, U., Petring, D., Schulz, W.
Self-Optimizing Focus Technique (SOFT) - a new approach on the way to next generation cognitive laser cutting machines
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. Paper 702
2010

Noll, R., Sturm, V., Fricke-Begemann, C., Werheit, P., Makowe, J.
Laser-induced breakdown spectroscopy - new perspectives for in-line analysis of materials
Metallurg. Anal./Yejin-fenxi : shuangyuekan 30, Suppl. 9, 22-30
2010

Noll, R., Fricke-Begemann, C., Jander, P., Kuhlen, T., Sturm, V., Werheit, P., Makowe, J.
Perspektiven der Lasertechnik zur Steigerung der Ressourceneffizienz
In: Rohstoffeffizienz und Rohstoffinnovationen. Hrsg.: U. Teipel. Stuttgart: Fraunhofer Verl. 2010. pp. 287-298. ISBN 978-3-8396-0097-9

Nüsser, C.
Gepulster Laserstrahl poliert Implantatoberflächen
MM Maschinenmarkt 44, 28-30
2010

Nyga, S., Geiger, J., Jungbluth, B.
Frequency doubling of fiber laser radiation of large spectral bandwidths
Proc. SPIE 7578, 75780P (7 S.)
2010

Ocylok, S., Weisheit, A., Kelbassa, I.
Functionally graded multi-layers by laser cladding for increased wear and corrosion protection
Physics Procedia 5, Nr 1, 359-367
2010

Ocylok, S., Weisheit, A., Kelbassa, I.
Increased wear and oxidation resistance of titanium aluminide alloys by laser cladding Euro Superalloys.
European Symposium on Superalloys and their Applications. Wildbad Kreuth, 25-28 May, 2010. (6 S.)
2010

Olowinsky, A., Kind, H.
Laser glass frit bonding for hermetic sealing of glass substrates and sensors
LPM 2010 - 11th International Symposium on Laser Precision Microfabrication, Stuttgart , 07. - 10. Juni 2010. (4 S.)
2010

Ostholt, R., Willenborg, E., Wissenbach, K.
Laser polishing of metallic freeform surfaces
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. Paper 1705, (7 S.)
2010

Petring, D.
Enhancing laser welding capabilities by hybridisation or combination with other processes
In: Advances in laser materials processing. Ed. by J.Lawrence, J. Pou, D. K. Y. Low and E. Toyserkani. Boca Raton: CRC Pr. 2010. ISBN 9781420094923. pp. 261-287
2010

Petring, D., Schneider, F., Wolf, N., Nazery Goneghany, V.
Influenza della qualità del fascio, della potenza e della lunghezza d'onda: Nel taglio e nella saldatura
Applicazioni Laser Feb/Mar, 32-37
2010

Petring, D., Nazery Goneghany, V.
Learning more about laser beam welding by applying it to copper and copper alloys ICALEO 2010.
29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. Paper 1602
2010

Petring, D.
More productivity, flexibility as well as energy efficiency in laser cutting and welding
AKL'10 - International Laser Technology Congress, Aachen, May 5-7, 2010. (37 S.)
2010

Petring, D., Schneider, F., Dickler, H.
Progress in cutting and welding of sheet metal assemblies in one machine with the laser combi-head
PICALO 2010, March 23-25, 2010. 4th Pacific International Conference on Applications of Lasers and Optics. Wuhan, Peoples Republic of China. Paper 1001
2010

Poprawe, R., Schulz, W., Schmitt, R.
Hydrodynamics of material removal by melt expulsion: Perspectives of laser cutting and drilling
Physics Procedia 5, Nr 1,1-18
2010

Poprawe, R.
Laseranwendung in der Medizin
In: Innovationen in Medizin und Gesundheitswesen. Hrsg.: V. Schumpelick, B. Vogel. Beitr. d. Symposiums vom 24. bis 26. 9. 2009 in Cadenabbia. Freiburg, Basel, Wien: Herder 2010. pp. 241-252. ISBN 978-3-451-30383-8

Richmann, A., Willenborg, E., Wissenbach, K.
Laser polishing of fused silica
Optical Fabrication and Testing (OFT), Jackson Hole, WY, June 14-17, 2010: Laser Writing in Materials (OTuC). (3. S.)
2010

Richmann, A., Willenborg, E., Wissenbach, K.
Polieren optischer Präzisionsoberflächen mit Laserstrahlung
DGaO Deutsche Gesellschaft für Angewandte Optik, 111. Jahrestagung vom 25.-29.5.2010 in Wetzlar. (2 S.)
2010

Russbueldt, P., Mans, T., Weitenberg, J., Hoffmann, H. D., Poprawe, R.
Compact diode-pumped 1.1 kW Yb:YAG Innoslab femtosecfond amplifier
Opt. Lett. 35; Nr 24, 4169-4171
2010

Schaefer, M., Jacobs, P., Bauer, D., Moll, D., Gillner, A.
Investigation and development of a molding process for the production of micro-hairs
Int. J. Adv. Manuf. Technol. 51, 935-944
2010

Schleifenbaum, J. H., Theis, J., Meiners, W., Wissenbach, K., Diatlov, Bültmann, J., Voswinckel, H.
High Power Selective Laser Melting (HP SLM) - upscaling the productivity of additive metal manufacturing towards factor 10
21. Annual International Solid Freeform Fabrication Symposium - an Additive Manufacturing Conference, August 9-11, 2010. (14 S.)

Schleifenbaum, J. H., Uam, J.-Y., Schuh, G., Hinke, C.
How can Reynolds help to improve the performance of production systems? Fluid dynamics and its contributions to production theory
IAENG Trans. Eng. Technol. 4 ,443-456, 2010. AIP Conf. Proceed. Vol. 1247

Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C.
Individualized production by means of high power Selective Laser Melting
CIRP J. Manuf. Sci. Techn. 2, 161-169
2010

Schmitt, F., Olowinsky, A.
Laser beam micro-joining
In: Yi Quin: Micromanufacturing Engineering and Technology. Norwich, N.Y.: W. Andrew Publ. 2010. pp. 185-201. ISBN 978-0-8155-1545-6

Schmitt, F., Mehlmann, B., Gedicke, J., Olowinsky, A., Gillner, A., Poprawe, R.
Laser beam micro welding with high brilliant fiber lasers
J. Laser Micro/Nanoeng. 5, Nr 3, 197-203
2010

Schulz, W., Nießen, M., Vossen, G., Schüttler, J.
Modelling and process monitoring of laser processing
Fraunhofer Allianz Numerische Simulation NUSIM: 1. Int. Conf. Multiphysics Simulation - Advanced Methods for Industrial Engineering June 22-23, 2010 in Bonn, Germany. (19 S.) 2010

Schulz, W., Pfeiffer, S., Zäh, M., Föckerer, T., Schober, A.
Untersuchung der strukturellen Stabilität von Modellen zur Schweißverzugssimulation bei Stahlwerkstoffen
Forschungsbericht FOSTA, Forschung für die Praxis P 708, 2010. 71 S. ISBN 3-937567-77-1

Schulz-Ruhtenberg, M., Baier, T., Boeckler, E.-W., Siebert, C.
Concept and realization of a high-rate laser drilling process reaching for ten thousands holes per second and beyond
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. Paper M1103, (4 S.)
2010

Schulz-Ruhtenberg, M., Babushkin, I. V., Loiko, N. A., Huang, K. F., Ackermann, T.
Polarization properties in the transition form below to above lasing threshold in broad-area vertical-cavity surface-emitting lasers
Phys. Rev. A 81, 23819 (11 S.)
2010

Schulz-Ruhtenberg, M., Haeberle, A., Russell, R., Hernández, J. L., Krantz, S.
Quest for the ideal laser for an industrial laser doping process for crystalline solar cells
LPM 2010 - 11th International Symposium on Laser Precision Microfabrication, Stuttgart, 07. - 10. Juni 2010. (5 S.)
2010

Schwendt, T., Michalik, C., Zavrel, M., Dennig, A., Spiess, A. C., Poprawe, R., Janzen, C.
Determination of temporal and spatial concentration gradients in hydrogel beads using multiphoton microscopy techniques
Appl. Spectrosc. 64, Nr 7, 720-726
2010

Seiler, N., Engelhardt, S., Riester, D., Mela, P., Bremus-Köbberling, E.
Laserinduzierte Gradienten zur Oberflächenfunktionlaisierung von Polymeren
Biomed. Tech. 55, Suppl. 1, 34-36
2010

Steinstraesser, L., Wehner, M., Trust, G., Sorkin, M., Bao, D., Hirsch, T., Sudhoff, H., Daigeler, A., Stricker, I., Steinau, H.-U., Jacobsen, F.
Laser-mediated fixation of collagen-based scaffolds to dermal wounds
Lasers Surg. Med. 42, 141-149
2010

Strauss, N., Fricke-Begemann, C., Noll, R.
Size-resolved analysis of fine and ultrafine particulate matter by laser-induced breakdown spectroscopy
J. Anal. Atomic Spectrom. 25, 867-874
2010

Strotkamp, M., Schwarz, T., Jungbluth, B., Faidel, H., Leers, M.
Efficient, green laser based on a blue-diode pumped rare-earth-doped fluoride crystal in an extremely short resonator
Proc. SPIE 7578, 757880O (7 S.)
2010

Strotkamp, M., Schwarz, T., Jungbluth, B.
Power scaling of a compact and efficient blue diode pumped solid state laser emitting green light
Advanced Solid State Photonics (ASSP), San Diego, Ca., February 3, 2010. OSA Technical Digest Series, Paper AMB 29. (3 S.)

Taleb-Araghi, B., Goettmann, A., Bambach, M., Biermann, T., Hirt, G., Weisheit, A.
Development of hybrid incremental sheet forming processes
Steel Research Int. 81, Nr 9 (special ed. 2010), No 419 (4 S.)
2010

Temmler, A., Graichen, K., Donath, J.
Laser polishing in medical engineering
Laser Technik J. 7, Nr 2, 53-57
2010

Ungers, M., Fecker, D., Frank, S., Donst, D., Märgner, V., Abels, P., Kaierle, S.
In-situ quality monitoring during laser brazing
Physics Procedia 5, Nr 2, 493-503
2010

Verbraak, H., Küpper, F., Jonkers, J., Bergmann, K.
Angular ion emission characteristics of a laser triggered tin vacuum arc as light source for extreme ultraviolet lithography
J. Appl. Phys. 93304, (6 S.)
2010

Vijayakumar, D., Jensen, O.B., Ostendorf, R., Westphalen, T., Thestrup, B.
Spectral beam combining of a 980 nm tapered diode laser bar
Opt. Expr. 18, 893-898
2010

Vogt, F., Flege, C., Hoeges, S., Borinski, M., Schulte, V. A., Hoffmann, R., Marx, N., Poprawe, R., Wissenbach, K., Blindt, R.
Development and evaluation of a novel poly-l-lactic acid/caprolactone copolymer coronary stent manufacturing by selective laser melting
Atherosclerosis Suppl. 11, Nr 2, 193-193
2010

Vossen, G., Schüttler, J., Nießen, M.
Optimization of partial differential equations for minimizing the roughness of laser cutting surfaces
In: Diehl, M., Glineur, F., Jarlebring, E., Michiels, W. (Eds.): Recent Advances in Optimization and its Applications in Engineering. Berlin, Heidelberg: Springer 2010. pp. 521-530. ISBN 978-3-642-12598-0

Witzel, J., Kelbassa, I., Gasser, A., Backes, G.
Increasing the deposition rate of Inconel 718 for LMD
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. PAPER 806, (7 S.)
2010

Wortmann, D., Reininghaus, M., Juschkin, L., Freiberger, R.
EUV-pump-probe microscopy of FS-Laser induced nano-structure formation
ICALEO 2010. 29th International Congress on Applications of Lasers & Electro Optics, Anaheim/Ca., September 26-30, 2010. N107 (4 S.)
2010

Wueppen, J., Pawlowski, E., Traub, M., Jungbluth, B., Hasler, K.-H., Sumpf, B., Erbert, G.
Compact module of a frequency-doubled, cw diode laser with an output power of more than 500mW at 531nm and a beam quality of less than 1.3
Proc. SPIE 7582, 758204, (8 S.)
2010

F. Schneider, D. Petring, V. Nazery, C. Nuesser
2D and 3D laser cutting and welding with the combi-head: Efficient production by flexible process changes
Proc. 5th Int. Conf. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15 -18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 245-249

D. Petring u.a.
3D-Laserschneiden und -schweißen in einer Maschine
MM MaschinenMarkt
Nr 23, 20-23, 2009

P. Russbueldt, T. Mans, G. Rotarius, J. Weitenberg, H.D. Hoffmann, R. Poprawe
400 W Yb:YAG Innoslab fs-amplifier
Opt. Expr.
17, Nr 15, 12230-12245, 2009

T. Biermann, G. Backes, A. Gasser, A. Weisheit
Adapted powder feed nozzles for different laser cladding applications
The Laser User
Nr 57, 28-29, 2009

M. Benk, K. Bergmann
Adaptive spatially resolving detector for the extreme ultraviolet with absolute measuring capability
Rev. Sci. Instr.
80, 331131-331136, 2009

D. Becker, W. Meiners, K. Wissenbach
Additive manufacturing of a copper alloy by Selective Laser Melting
4th International Conference on Advanced Research in Virtual and Rapid Prototyping (VR@P)
2009

Becker, D., Meiners, W., Wissenbach, K.
Additive manufacturing of copper alloys by Selective Laser Melting
5th International WLT-Conference Lasers in Manufacturing, LiM 2009, Munich
2009

P. Jander, R. Noll
Automated detection of fingerprint traces of high explosives using ultraviolet Raman spectroscopy
Appl. Spectrosc.
63, Nr 5, 559-563, 2009


J. Miesner, A. Timmermann, J. Meinschien, B. Neumann, S. Wright, T. Tekin, H. Schröder, T. Westphalen, F. Frischkorn
Automated assembly of Fast Axis Collimation (FAC) lenses for diode laser bar modules
Proc. SPIE
7198, 71980G (10 S.), 2009

N. C. Stache, A. Stollenwerk, J. Gedicke, A. Olowinsky, A. Knepper, T. Aach
Automatic calibration of a scanner-based laser welding system
J. Laser Appl.
21, Nr 1, 10-15, 2009

C. Gehlen, J. Makowe, R. Noll
Automatisierte Verwechslungsprüfung von Edelstahlhalbzeugen in der Produktion
Stahl und Eisen
129, Nr 7, 70-72, 2009

W. Schulz, U. Eppelt
Basic concepts of laser drilling
In: The Theory of Laser Materials Processing: Heat and Mass Transfer in Modern Technology. Ed. J. M. Dowden
Dordrecht: Springer 2009
Springer Series in Materials Science, Vol.119
pp. 129-165

D. Petring
Calculable laser cutting
Proc.of the 5th Int. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15 -18, 2009 Ed. by A. Ostendorf [u.a.]
Stuttgart: AT Fachverl. 2009
6 S.

M. Banyay, L. Juschkin, P. Loosen, M. Roeckerath, J. Schubert
Characterization of ultra-thin layers in MOS-devices with XUV reflectometry
JARA FIT Jülich-Aachen Research Alliance for Fundamentals of Future Information Technology - Annual Report 2008
pp. 47-48, 2009

G. L. Georgiev, R. J. Baird, E. F. McCullen, G. Newaz, G. Auner, R. Patwa, H. Herfurth
Chemical bond formation during laser bonding of Teflon (R) FEP and titanium
Appl. Surf. Sci.
255, Nr 15, 7078-7083, 2009

C. D. Gehlen, E. Wiens, R. Noll, G. Wilsch, K. Reichling
Chlorine detection in cement with laser-induced breakdown spectroscopy in the infrared and ultraviolet spectral range
Spectrochim. Acta. Part B: Atomic Spectroscopy
64, 1135-1140, 2009

J. Diettrich, J. Stollenwerk, M. Kogel-Hollacher, M. Traub, C. Schnitzler
Coaxial laser brazing head
Proceedings of the Fifth International WLT-Conference on Lasers in Manufacturing 2009, Munich, June 2009
Stuttgart: AT Fachverl.
1-5, 2009

D. Trusheim, M. Schulz-Ruhtenberg, J. L. Hernandez, A. Uruena, S. Krantz, C. Morilla, T. Sarnet, A. Olowinsky
Damage-less laser ablation of thin films for silicon solar cells
Proc. of the 5th Int. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15-18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT Fachverl. 2009
5 S.

M. Dahmen, A. Drenker, M. Ungers, S. Pfeiffer, S. Kaierle
Detection of phase boundaries and defect detection in CO2-laser beam welding
Proc. of LAMP 2009 - the 5th Congress on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
5 S.

J. Jahnke, D. M. Mahlmann
Differences in the cellular dry weight per unit biovolume of Phormidium autumnale (Cyanobacteria) dependent on growth conditions
J. AppL. Phycol.
DOI 10.1007s10811-0
1-7, 2009

M. Schulz-Ruhtenberg, J. L. Hernandez, V. Prajapati, R. Bleidiessel, C. Morilla, Y. Larmanda, V. Vervisch, T. Sarnet, A. Olowinsky
Direct laser doping for high-efficiency solar cells
ICALEO 2009, 28th International Congress on Applications of Lasers & Electro-Optics, November 2-5, 2009
4 S.

M. Strotkamp, T. Schwarz, B. Jungbluth
Efficient, green laser based on a blue-diode pumped rare earth doped fluoride crystal in an extreme short resonator
Conference on Lasers and Electro-Optics 2009 and the European Quantum Electronics Conference. CLEO Europe - EQEC 2009, Munich, 14-19 June 2009
Mulhouse: European Physical Society
1-1, 2009

J. Dietrich, M. Brajdic, S. Engbers, L. Klinkmüller, I. Kelbassa
Enhancing the quality and productivity of laser drilling by changing process gas parameters while processing
28th International Congress on Applications of Lasers & Electro-Optics, November 2-5, 2009
Orlando, Fl.: LIA 2009
4 S. (Paper 1705)

L. Juschkin, R. Freiberger, K. Bergmann
EUV microscopy for defect inspection by dark-field mapping and zone plate zooming
J. Phys.: Conf. Ser.
186, 1-3, 2009

O. Fitzau, J. Geiger, H.-D. Hoffmann
Experimental and theoretical studies on kW class polarized fiber lasers for cw operation
Proc. SPIE
7195, 719509 (9 S.), 2009

J. Schüttler, J. Lose, R. Schmitt, W. Schulz
Exploring processing domain boundaries of complex production processes using a metamodeling approach
12th CIRP Conf. on Modelling of Machining Operations, May 7-8, 2009, San Sebastian (Spain). Ed.: P.J. Arrazola. Vol. 2
Paris: CIRP 2009
pp. 835-841

J. Gottmann, D. Wortmann, M. Hörstmann-Jungemann
Fabrication of sub-wavelength surface ripples and in-volume nanostructures by fs-laser induced selective etching
Appl. Surf. Sci.
255, 5641-5646, 2009

M. Duering, V. Kolev, B. Luther-Davies
Generation of tuneable 589nm radiation as a Na guide star source using an optical parametric amplifier
Opt. Expr.
17, 437-446, 2009

A. Weisheit, K. Wissenbach
Graded layers for wear and corrosion protection produced by laser cladding
In: Friction, Wear and Wear Protection. (Eds.) A. Fischer, K. Bobzin
Weinheim: Wiley-VCH 2009
pp. 1-6

D. Gu, Y. Shen, G. Meng
Growth morphologies and mechanisms of TiC grains during Selective Laser Melting of Ti-Al-C composite powder
Materials Lett.
63, 2536-2538, 2009

A. S. Khanna, S. Kumari, S. Kanungo, A. Gasser
Hard coatings based on thermal spray and laser cladding
Int. J. Refract. Met. Hard Mat.
27, Nr 2, 485-49, 2009

R. Wester, R. Noll
Heuristic modeling of spectral plasma emission for laser-induced breakdown spectroscopy
J. Appl. Phys.
106, 123302-1-123302-10, 2009

M. Traub, M. Giesberts, J. Geiger, C. Johnigk, H.-D. Hoffmann
High peak power fiber coupled super-pulsed diode lasers
Proc. SPIE
7198, 71980W-1-71980W-10, 2009

G. Kochem, M. Traub, S. Hengesbach, D. Hoffmann
High power fiber coupled modules based on tapered diode-lasers at 975 nm
Proc. SPIE
7198, 71980R (10 S.), 2009

H. Schleifenbaum, W. Meiners, K. Wissenbach, C. Hinke
High Power Selective Laser Melting: A new approach for individualized series production
ICALEO 2009, 28th International Congress on Applications of Lasers & Electro-Optics, November 2-5, 2009
Orlando; Fl.: LIA 2009
10 S.

Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C.
High Power Selective Laser Melting: A new approach for individualized series production
28th International Congress on Applications of Lasers & Electro-Optics (ICALEO), 2009, Orlando
2009

M. Benk, D. Schäfer, T. Wilhein, K. Bergmann
High power soft x-ray source based on a discharge plasma
J. Phys.: Conf. Ser.
186, 012024 (3 S.), 2009

B. Gronloh, M. Höfer, R. Wester, H.-D. Hoffmann
High power UV generation at 355 nm by means of extracavity frequency conversion of a high repetition rate Innoslab MOPA system
Proc. SPIE
7193, 71930Y (11S.), 2009

J. Gottmann, M. Hörstmann-Jungemann, M. Hermans, D. Beckmann
High speed and high precision Fs-laser writing using a scanner with large numerical aperture
J. Laser Micro/Nanoeng.
4, Nr 3, 192-196, 2009

N. Michel, M. Calligaro, Y. Robert, M. Lecomte, O. Parillaud, M. Krakowski, T. Westphalen, M. Traub
High wall-plug efficiency diode lasers with an Al-free active region at 975 nm
Proc. SPIE
7198, 71981H (8 S.), 2009

T. Mans, P. Rußbüldt
Höchste mittlere Leistung für Ultrakurzpulslaser
LASER+PHOTONIK
Nr 3, 20-24, 2009

D. Petring, F. Schneider, N. Wolf, V. Nazery Goneghany
How beam quality, power and wavelength influence laser cutting and welding processes
Proc. of LAMP 2009 - 5th Int. Congr. on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
8 S.

T. Biermann, A. Goettmann, J. Zettler, M. Bambach, A. Weisheit, G. Hirt, R. Poprawe
Hybrid laser assisted incremental sheet forming - improving formability of Ti- and Mg-based alloys
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15th-
18th, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 273-278

J. K. Kristensen, S. Webster, D. Petring
Hybrid laser welding of thick section steels -the HYBLAS Project
NOLAMP 12. 12th Nordic Conference in Laser Processing of Materials, 24th - 26th August 2009 Copenhagen
Lyngby, Denmark : ATV-SEMAPP/The Technical University of Denmark, 2009
18 S.

D. Gu, Z. Wang, Y. Shen, Q. Li, Y. Li
In-situ TiC particle reinforced Ti-Al matrix composites: Powder preparation by mechanical alloying and Selective Laser Melting behavior
Appl. Surf. Sci.
255, 9230-9240, 2009

D. Esser, D. Wortmann, J. Gottmann
In-volume waveguides by fs-laser direct writing in rare-earth-doped fluoride glass and phosphate glass
Proc. SPIE
7205, 7205101-7205109, 2009

Schleifenbaum, H., Meiners, W., Wissenbach, K.
Individualisierte Produktion mittels High Power Selective Laser Melting (SLM) : Erhöhung der Effizienz laserbasierter generativer Fertigungsverfahren durch den Einsatz neuer Hochleistungsstrahlquellen
wt Werkstattstechnik online 99, Nr. 6
376 – 383, 2009

H. Schleifenbaum, W. Meiners, K. Wissenbach
Individualized production by means of High Power Selective Laser Melting
42nd CIRP Conference on Manufacturing Systems - Sustainable development of Manufacturing Systems, Grenoble, France, June 3-5, 2009
Paris: CIRP 2009
8 S.

D. Esser, D. Mahlmann, D. Wortmann, J. Gottmann
Interference microscopy of femtosecond laser written waveguides in phosphate glass
Appl. Phys. B - Lasers and Optics
96, Nr 2-3, 5 S. 2009

Jaeger, CR., Koplin, C., Gurr, M., Meiners, W.
Internal stresses and shape distortions in generatively manufactured implants
World Conference on Regenerative Medicine (WRM), 2009, Leipzig
2009

M. Leers, T. Westphalen, R. Pathak, C. Scholz
Investigation of n-side cooling in regards to bar geometry and packaging style of diode laser
Proc. SPIE
7198, 71980H, (9 S.), 2009

F. Schmitt, B. Mehlmann, J. Gedicke, A. Olowinsky, A. Gillner, R. Poprawe
Laser beam micro welding with high brilliant fiber lasers
Proc. of LAMP 2009 – 5th Int. Congr. on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
6 S.

G. L. Georgiev, T. Sultana, R. J. Baird, G. Auner, G. Newaz, R. Patwa, H. Herfurth
Laser bonding and characterization of Kapton(A (R)) FNTi and Teflon(A (R)) FEPTi systems
J. Mat. Sci
44, 882-888,2009

F. Schmitt, M. Schulz-Ruthenberg, A. Olowinsky, A. Gillner
Laser joining process for photovoltaic module production
Proc. of the 5th Int. WLT-Conf. on Lasers in Manufacturing 2009, Munich, June 15 18, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 625-630

A. Richmann, E. Willenborg, K. Wissenbach
Laser polishing of fused silica
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15th-18 th, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 691-702

R. Ostholt, E. Willenborg, K. Wissenbach
Laser polishing of metallic freeform surfaces
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15th-18th, 2009.
Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 397-401

J. Powell, D. Petring, R.V. Kumar, S.O. Al-Mashikhi, A.F.H. Kaplan, K. T. Voisey
Laser-oxygen cutting of mild steel: the thermodynamics of the oxidation reaction
J. Phys. D: Appl. Phys.
42, 015504 (11 S.), 2009

R. Noll, V. Sturm, J. Makowe
Laseremissionsspektrometrie analysiert zeitnah Stahlproben
Stahl und Eisen
129, 61-65, 2009

F. Sari, D. Flock, A. Gillner, R. Poprawe, E. Haberstroh
Laserdurchstrahlfügen für Mikrosysteme und Halbleitertechnik
4. Kolloquium Mikroproduktion. Hrsg. F. Vollertsen, S. Büttgenbach
Bremen: BIAS Verl. 2009
12 S.

M. Banyay, S. Brose, L. Juschkin
Line image sensors for spectroscopic applications in the extreme ultraviolet
Meas. Sci. Technol. 20, 105201 (5 S.), 2009

S. Hoeges, M. Lindner, H. Fischer, W. Meiners, W. Wissenbach
Manufacturing of bone substitute implants using Selective Laser Melting
In: ECIFMBE 2008, IFMBE Proc. 22.
(Eds.) J. Vander Sloten [u.a.]
Berlin, Heidelberg: Springer 2009
pp. 2230-2234

Höges, S., Lindner, M., Fischer, H., Meiners, W., Wissenbach, K.
Manufacturing of bone substitute implants using selective laser melting
4th European Conference of the International Federation for Medical and Biological Engineering (ECIFMBE), 2008, Antwerp
2009

I. Mingareev, A. Horn
Melt dynamics of aluminium irradiated with ultrafast laser radiation at large intensities
J. Appl. Phys.
106, 13513 (7 S.), 2009

H. Schmidt, A. C. Rota, Ph. Imgrund, M. Leers
Micro metal injection moulding for thermal management applications using ultrafine powders
Powder Injection Moulding Int.
3, Nr 2, 55-59, 2009

D. Gu, Y. Shen
Microstructures and properties of high Cr content coatings on inner surfaces of carbon steel tubular components prepared by a novel mechanical alloying method
Appl. Surf. Sci.
256, 223-230, 2009

S. Ocylok, A. Weisheit
Multi-graded layers by laser cladding for wear and corrosion protection of die-casting moulds
Proceedings of the Fifth WLT-Conference on Lasers in Manufacturing 2009, Munich, June 2009
Stuttgart: AT Fachverl.
1-4, 2009

D. Wortmann, I. Mingareev, A. Brand, A. Horn
Micro-welding of glass by fs-laser irradiation and process observation using fs-pump-probe white light interference microscopy
Conference on Lasers and Electro-Optics 2009 and the European Quantum Electronics Conference. CLEO Europe - EQEC 2009, Munich, 14-19 June 2009
Mulhouse: European Physical Society
CM2.2 THU, (1 S.), 2009

D. Wortmann, T. Mans, J. Weitenberg
Multi-100 W average power fs-laser for material processing applications
ICALEO 2009, 28th Int. Congr. on Applications of Lasers & Electro-Optics, November 2-5, 2009, Orlando, Fl.
paper M101, pp. 856-860, 2009

M. Giesberts, J. Geiger, M. Traub, H.-D. Hoffmann
Novel design of a gain-switched diode-pumped fiber laser
Proc. SPIE
7195, 71952P (9 S.), 2009

D. Petring, F. Schneider
One machine does it all for laser beam welding and cutting
Welding J.
March, 38-41, 2009

R. Noll, M. Krauhausen
Onlineprüfung von Rohren mit Lasertechnik
Stahlmarkt
H. 1, 40, 2009

D. Schäfer, M. Benk, K. Bergmann, T. Nisius, U. Wiesemann, T. Wilhein
Optical setup for tabletop soft X-ray microscopy using electrical discharge sources
J. Phys.: Conf. Ser.
186, 063507 (3 S.), 2009

K. Bergmann, S.V. Danylyuk, L. Juschkin,
Optimization of a gas discharge plasma source for extreme ultraviolet interference lithography at a wavelength of 11 nm
J. Appl. Phys.
106, 073309 (5 S.), 2009

T. Westphalen, M. Leers, M. Werner, M. Traub, H.-D. Hoffmann, R. Ostendorf
Packaging influence on laser bars of different dimensions
Proc. SPIE
7198, 71980K (8 S.), 2009

C. Fricke-Begemann
Partikel-Zusammensetzung mit Laserspektroskopie messen
Laborpraxis
Nr 12, 48-50, 2009

B. Jungbluth, D. Oberbeckmann, J. Wueppen
Power-scaling and prototyping of a gain switched Ti:Sapphire laser with a tuning range of 400 nm
Proc. SPIE
7193, 71930 (8 S.), 2009

D. Gu, Y. Shen, Z. Lu
Preparation of TiN-Ti5Si3 in-situ composites by Selective Laser Melting
Materials Lett.
63, 1577-1579, 2009

Buchbinder, D., Meiners, W., Wissenbach, K., Müller-Lohmeier, K., Brandl, E., Skrynecki, N.
Rapid Manufacturing of Aluminium Parts for Serial Production via Selective Laser Melting (SLM)
4th International Conference on Rapid Manufacturing, 2009, Loughborough
1 – 12, 2009

D. Buchbinder, W. Meiners
Rapid Manufacturing von Aluminiumbauteilen
Ingenieur Forum
1, 22-25, 2009

Wilkes, JI.
Selektives Laserschmelzen zur generativen Herstellung von Bauteilen aus hochfester Oxidkeramik
Dissertation, RWTH Aachen University
2009

C. Brecher, N. Pyschny, P. Loosen, M. Funck, V. Morasch, R. Schmitt, A. Pavim
Self-optimising flexible assembly systems
Self-x in Engineering. Benjamin Klöpper, Wilhelm Dangelmaier (Eds.)
Münster: MV-Wissenschaft 2009
pp. 23-38
ISBN 978-3-86582-938-2

W. Schulz, M. Nießen, U. Eppelt, K. Kowalick
Simulation of laser cutting
In: The Theory of Laser Materials Processing: Heat and Mass Transfer in Modern Technology. Ed. J. M. Dowden
Dordrecht: Springer 2009
Springer Series in Materials Science, Vol.
119
pp. 21-69

J. Löhring, A. Meissner, V. Morasch, P. Becker, W. Heddrich, D. Hoffmann
Single-frequency Nd:YGG laser at 935 nm for future water-vapour DIAL systems
Proc. SPIE
7193, 71931Y (7 S.), 2009

Höges, S., Meiners, W.
SLM von Polylactiden zur Herstellung von resorbierbaren Implantaten
RTejournal - Forum für Rapid Technologie, Jun 09, Nr. 6
2009

J. Dolkemeyer, M. Funck, V. Morasch, C. Schnitzler, P. Loosen
Soldering techniques for the assembly of high power solid-state lasers
European Conference on Lasers and Electro-Optics and the XIth European Quantum Electronics Conference, Munich June 14-19, 2009
1 S.

M. C. Funck, P. Loosen
Statistical simulation of selectively assembled optical systems
Proc. SPIE
7427, 7427B (10 S.), 2009

A. Temmler, E. Willenborg, N. Pirch, K. Wissenbach
Structuring by remelting
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15th - 18th, 2009. Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 403-407

H. Maurer, G. Vossen
Sufficient conditions and sensitivity analysis for optimal bang-bang control problems with state constraints
In: System Modeling and Optimization. Ed.: A. Korytowski u.a. 23rd IFIP TC 7 Conference, Cracow, Poland, July 23-27, 2007
Berlin [u.a]: Springer 2009
IFIP Advances in Information and Communication Technology, Vol. 312.
ISBN 978-3-642-04801-2
pp. 82-99

T. Sultana, G. L. Georgiev, R. J. Baird, G. W. Auner, G. Newaz, R. Patwa, H. J. Herfurth
Study of two different thin film coating methods in transmission laser micro-joining of thin Ti-film coated glass and polyimide for biomedical applications
J. Mech. Behav. Biomed. Mat.
2, 237-242, 2009

G. Vossen
Switching time optimization for bang-bang and singular controls
J. Optimization Theory Appl.
Online first
1-18 (2009)

R. Poprawe, F. Schmitt, J. Gedicke, B. Mehlmann, A. Olowinsky, A. Gillner
Systemtechnik zur örtlichen Leistungsmodulation beim Laserstrahl-Mikroschweißen.
4. Kolloquium Mikroproduktion. Hrsg.: F. Vollertsen, [u.a.]
Bremen: BIAS Verl. 2009
10 S.

M. Banyay, L. Juschkin
Table-top reflectometer in the extreme ultraviolet for surface sensitive analysis
Appl. Phys. Lett.
94, 1-3, 2009

M. Dahmen, S. Kaierle
The ecological footprint of laser beam welding
Proc. of LAMP 2009 - the 5th Int. Congr. on Laser Advanced Materials Processing, June 29 - July 2, 2009, Kobe, Japan
1-4 (2009)

J. Dietrich, M. Brajdic, A. Mirau, L. Klinkmueller, I. Kelbassa
The influence of process gases on laser drilling
Proc. of the 5th Int. WLT Conf. on Lasers in Manufacturing 2009, Munich, June 15th-18th, 2009.
Ed. by A. Ostendorf [u.a.]
Stuttgart: AT-Fachverlag 2009
pp. 815-818

H. Schleifenbaum, J.-Y .Uam, G. Schuh, C. Hinke
Turbulence in production systems - fluid dynamics and its contributions to production theory
Proc. of the World Congress on Engineering and Computer Science 2009. WCECS 2009, October 20-22, 2009, San Francisco/USA. Vol. 2
6 S.

Schleifenbaum, H., Uam, JY., Schuh, G., Hinke, C.
Turbulence in Production Systems - Fluid Dynamics and its Contributions to Production Theory
International Conference on Systems Engineering and Engineering Management 2009, San Francisco
2009

L. Juschkin, R. Freiberger
Two magnification steps EUV microscopy with a Schwarzschild objective and an adapted zone plate lens
Proc. SPIE
7360, 736005 (8 S.), 2009

T. Mans, P. Rußbüldt, J. Weitenberg, G. Rotarius, D. Hoffmann, R. Poprawe
Ultrafast Ytterbium doped INNOSLAB amplifier with high average power
Conference on Lasers and Electro-Optics/International Quantum Electronics Conference/, OSA Technical Digest (CD) (Optical Society of America, 2009)
paper CThJ2, (2 S.) , 2009

M. Mir, N. Gutknecht, R. Poprawe, L. Vanweersch, F. Lampert
Visualising the procedures in the influence of water on the ablation of dental hard tissue with erbium:yttrium-aluminium-garnet and erbium, chromium:yttrium-scandium-gallium-garnet laser pulses
Lasers Med. Sci.
24, 365-374, 2009

Buchbinder, D., Schleifenbaum, H.
Wirtschaftliche Alternative : Neue Perspektiven zum Rapid Manufacturing von Aluminiumbauteilen für die Serienproduktion
Gießerei-Erfahrungsaustausch 53, Nr. 4
18 – 20, 2009

S. Danylyuk, L. Juschkin, S. Brose, K. Bergmann, P. Loosen [u.a.]
XUV interference lithography for sub-10 nm patterning
JARA FIT Jülich-Aachen Research Alliance - Annual Report 2008
pp. 49-50, 2009

M. Banyay, L. Juschkin, T. Bücker, P. Loosen [u.a.]
XUV metrology: Surface analysis with Extreme Ultraviolet Radiation
Proc. SPIE
7361, 736113-1-736113-12, 2009

T. Mans, P. Rußbüldt, Weitenberg, J.
Yb :KYW Innoslab-Amplifier
Conference on Lasers and Electro-Optics 2009 and the European Quantum Electronics Conference. CLEO Europe - EQEC 2009, Munich, 14-19 June 2009
Mulhouse: European Physical Society
paper CA3_2 (1 S.), 2009

A. Roesner, P. Abels, A. Olowinsky, N. Matsuo, A. Hino
Absorber-free laser beam welding of transparent thermoplastics
Proc. of the 27th Int. Conf. on Applications of Lasers and Electro-Optics 2008, ICALEO, Temecula, CA, October 20-23
Paper M303
7 S., 2008

M. Leers, H. Schmidt, P. Imgrund
Alternative cooling solutions for high power optoelectronic
IMAPS 2008, 41st International Symposium on Microelectronics, November 2-6, 2008, Rhode Island Convention Center, Providence, Rhode Island USA
pp. 1-8, 2008

M. Brajdic, K. Walther, U. Eppelt
Analysis of laser drilled deep holes in stainless steel by superposed pulsed Nd:YAG laser radiation
Opt. Lasers Eng.
46, 648-655, 2008

T. Kuhlen, C. Fricke-Begemann, N. Strauss, R. Noll
Analysis of size-classified fine and ultrafine particulate matter on substrates with laser-induced breakdown spectroscopy
Spectrochim. Acta Part B
63, 1171-1176, 2008

F. Sari, W.-M. Hoffmann, E. Haberstroh, R. Poprawe
Applications of laser transmission processes for the joining of plastics, silicon and glass micro parts
Microsystems Technol.
14, 1879-1886, 2008

K. Walther, M. Brajdic, I. Kelbassa, R. Poprawe
Bohren mit gepulster Laserstrahlung
WT Werkstattstechnik
98, 520-523, 2008

M. Benk, K. Bergmann, D. Schäfer, T. Wilhein
Compact soft x-ray microscope using a gas-discharge light source
Opt. Lett.
33, Nr 20, 2359-2361, 2008

M. Dahmen, S. Kaierle, Aiping, W., Wenjin, L., Yi, S., Hequiang, W.
Comparative study of techniques for wear minimisation of engine parts
Proc. of the 3rd Pacific Int. Conf. on Application of Lasers and Optics (PICALO) 2008, Beijing April 16 - 18,2008
6 S. (2008)

Q. Wang, P. Jander, C. Fricke-Begemann, R. Noll,
Comparison of 1064 nm and 266 nm excitation of laser-induced plasmas for several types of plastics and one explosive
Spectrochim. Acta Part B
63, 1011-1015, 2008

M. Leers, K. Boucke
Cooling approaches for high power diode laser bars
58th Electronic Components & Technology Conf. 2008, Lake Beuna Vista/Fl., USA, May 27 - May 30, 2008
Piscataways/N.J: IEEE Pr. 2008
7 S.

K. Bobzin, S. Theiß, R. Poprawe, A. Roesner, E. Haberstroh, D. Flock, U. Reisgen, N. Wagner
Der Exzellenzcluster "Integrative Produktionstechnik für Hochlohnländer" der RWTH Aachen University - Herstellung hybrider Metall-Kunststoffbauteile durch moderne Fügeverfahren
Joining Plastics – Fügen von Kunststoffen
2, 210-216, 2008

F. Schmitt, M. Funck, A. Boglea, R. Poprawe
Development and application of miniaturized scanners for laser beam micro-welding
Microsystem Technol.
14, 1861-1869, 2008

F. Schmitt, M. Funck, A. Boglea, R. Poprawe
Development and application of miniaturized scanners for laser beam micro welding
Proc. of PICALO 2008, 3rd Pacific Int. Conf. on Applications of Lasers and Optics, April 16-18, 2008, Bejing, China
727-732, 2008

Poprawe, R., Gillner, A., Hoffmann, HD., Kaierle, S., Loosen, P., Meiners, W., Noll, R., Willenborg, E.
Disk, fiber, rod, slab: New laser concepts open new application perspectives
6th International Conference on Photonics, Devices, and Systems, 2008, Prague
2008

A. Horn, I. Mingareev, J. Gottmann, A. Werth, U. Brenk
Dynamical detection of optical phase changes during micro-welding of glass with ultra-short laser radiation
Meas. Sci. Technol
19, 1-6, 2008

T. Westphalen, M. Leers, C. Scholz, K. Boucke
Emitter resolved analysis of packaged laser bars
Proc. SPIE, 6876, 68760O, 2008

J. Powell, D. Petring, V. Kumar, S. Al-Mashikhi, A. Kaplan, K. Voisey
Energy input from oxidation in laser-oxygen cutting of mild steel
The Laser User
Issue 53, 32-35, 2008

D. Petring
Enhancement of laser welding capabilities by hybridization or combination of different processes
Proc. of the 3rd Pacific Int. Conf. on Applications of Lasers and Optics 2008, PICALO, Beijing, China, April 16-18, 2008
Paper 705, 324-329, 2008

D. Petring
Enhanced capabilities of laser welding by hybridization and combination techniques
Proc. of the 70th Laser Materials Processing Conference, Japan Laser Processing Society JLPS, Osaka, Japan, May 27-28, 2008
Keynote paper, 7-12, 2008

D. Petring
Enhanced capabilities of laser welding by hybridization and combination techniques
The Laser User, Issue 52, 36-39, 2008

M. Waldmann, R. Caspary, D. Wortmann, J. Gottmann, W. Kowalsky
Erbium-doped fluoride glass waveguides
Electron. Lett.
44, Nr 20, 1193-1194, 2008

M. Funck, P. Loosen
Estimating the performance gain of selectively assembled optical systems
53. Int. Wissenschaftliches Kolloquium, Techn. Univ. Ilmenau. CD-ROM
pp. 160-161, 2008

L. Juschkin, G. Derra, K. Bergmann
EUV light sources
Low Temperature Plasmas. Ed. R. Hippler. u.a. 2. ed.
Weinheim: Wiley-VCH 2008
pp. 619-654

K. Bergmann, L. Juschkin, R. Poprawe
Extreme ultraviolet lithography
Nanotechnology. Vol. 3: Information Technology I. Ed.: R. Waser
Weinheim: Wiley-VCH 2008
pp. 181-208

E. Wagenaars, A. Mader, K. Bergmann, J. Jonkers, W. Neff
Extreme ultraviolet plasma source for future lithography
IEEE Trans. Plasma Sci.
36, Nr 4, 1280-1281, 2008

J. Gottmann, D. Wortmann, M. Hörstmann-Jungemann
Fabrication of sub-wavelength surface ripples and in-volume nanostructures by fs-laser induced selective etching
Appl. Surf. Sci.
doi. 10.1016/j.apsusc.2008.10.097 (Online), 2008

V. Sturm, H.-U. Schmitz, T. Reuter, R. Fleige, R. Noll
Fast vacuum slag analysis in a steel works by laser-induced breakdown spectroscopy
Spectrochim. Acta Part B
63, 1167-1170, 2008

R. Schmitt, A. Pavim, C. Brecher, N. Pyschny, P. Loosen, M. Funck, J. Dolkemeyer, V. Morasch
Flexibel automatisierte Montage von Festkörperlasern
WT-Online Nr
11/12, 955-960, 2008

F. Schneider, D. Petring
Flexible 3-D – laser cutting and welding with the combi-head
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA, October 20-23, 2008
Laser Materials Processing Conference, Paper 1305, 582-588, 2008

G. Kochem, M.Haverkamp, K. Boucke
Frequency stabilized high brightness tapered amplifier and laser modules
Proc. SPIE
6997, 69971A, 2008

D. Wortmann, J. Gottmann
Fs-Laser structuring of ridge waveguides
Appl. Phys. A
93, 197-201, 2008

J. Miesner, F. Frischkorn, N. Boenig, D. Rose, T. Vahrenkamp, K. Boucke
Full automated packaging of high power diode laser bars
58th Electronic Components & Technology Conf. 2008, Lake Beuna Vista/Fl., USA, May 27 - May 30, 2008
Piscataways/N.J: IEEE Pr. 2008
6 S.

D. Ganser, L. Starovoytova, D. Wortmann, J. Gottmann, I. Vasilief, L. Moiseev
Growth of Nd:Gd3Ga5O12 thin films by pulsed laser deposition for planar waveguide laser
J. Laser Micro/Nanoeng.
3, 19-23, 2008

P. Rußbüldt, T. Mans, D. Hoffmann, R. Poprawe
High Power Yb:YAG Innoslab fs-Amplifier
Proceedings of the Conference on Lasers and Electro-Optics & Quantum Electronics and Laser Science Conference (CLEO), May 4-9, 2008, San Jose, California
Vortrag CTuK5, 2 S., 2008

R. Poprawe, A. Gillner, D. Hoffmann, J. Gottmann, W. Wawers, W. Schulz
High speed high precision ablation from ms to fs
Proc. SPIE
7005, 12 S., 2008

N. Stache, J. Dieckelmann, R. Firnich, J. Gedicke, P. Abels, A. Olowinsky, T. Aach
High speed video-based melt pool surveillance in laser spot welding
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA,
October 20-23, 2008

A. Gillner, A. Dohrn, C. Hartmann
High quality laser machining for tool and part manufacturing using innovative machining systems and laser beam sources
Proc. of the 3rd CIRP Int. Conf. High Performance Cutting (HPC), Dublin, Ireland,
June 12 -13, 2008

N. Michel, M. Lecomte, O. Parillaud, M. Calligaro, M. Krakowski, T. Westphalen, M. Traub
High-wall plug efficiency broad area laser bar with strain-compensated quantum well
Proc. IEEE 21st International Semiconductor Laser Conference (ISLC) September 14-18, 2008
pp. 103-104 , 2008

J. Gottmann, D. Wortmann, N. Brandt
Highspeed manufacturing of periodical surface and in-volume nanostructures by fs-laser direct writing
Proc. SPIE
6879, 12 S. 2008

S. Webster, J. Klaestrup-Kristensen, D. Petring
Hybrid laser welding of thick section steels
Proc. of the IIW Int. Conf. “Safety and Reliability of Welded Components in Energy and Processing Industry”, Graz, Austria, July 10-11, 2008
15 S., 2008

T. Biermann, A. Weisheit, K. Bobzin, J. Zwick, F. Ernst, K. Richardt
Improving wear and corrosion of magnesium alloys through a combination of thermal spraying and laser cladding
/International Thermal Spray Conference ITSC 2008./ Maastricht/NL, June 2-4, 2008
Düsseldorf: DVS Verl. 2008
5 S

K. Walther, C. Holtkoetter, I. Kelbassa, R. Poprawe
Influence of process gas sort and pressure on laser percussion drilling
Proc. of the 27th Int. Conf. on Applications of Lasers and Electro-Optics 2008, ICALEO, Temecula, CA, October 20-23, Paper 301
7 S., 2008

H. Schinkel, P. Jacobs, S. Schillberg, M. Wehner
Infrared picosecond laser for perforation of single plant cells
Biotechnol. Bioeng.
99, 244-248, 2008

M. Banyay, L. Juschkin
Innovative approaches to surface sensitive analysis techniques on the basis of plasma-based off-synchrotron XUV/EUV light sources
Proc. SPIE
7077, 707714-707723, 2008

J. Dietrich, M. Brajdic, K. Walther, A. Horn, I. Kelbassa, R. Poprawe
Investigation of increased drilling speed by online high-speed photography
Optics Lasers Eng.
46, 705-710, 2008

M. Brajdic, M. Hermans, A. Horn, I. Kelbassa
Investigation of plasma and shock-wave dynamics and properties inside holes during laser drilling of metals
Proc. LPM2008 - 9th Int. Symposium on Laser Precision Microfabrication
4 S., 2008

I. Mingareev, A. Horn
Investigations of the ultrafast laser induced melt dynamics by means of transient quantitative phase microscopy (TQPm)
Proc. SPIE
7005, 9 S., 2008

A. Horn, I. Mingareev, A. Werth, M. Kachel, U. Brenk
Investigations on ultrafast welding of glass-glass and glass-silicon
Appl. Phys. A
93, 171-175, 2008

M. Brajdic, M. Hermans, A. Horn, I. Kelbassa
In situ measurement of plasma and shock wave properties inside laser-drilled metal holes
Meas. Sci. Technol.
19, 1-8, 2008

A. Horn, I. Mingareev, A. Werth, M. Kachel
Joining of thin glass with semiconductors by ultra-fast high-repetition laser welding
Proc. SPIE
6880, 6 S., 2008

A. Roesner, A. Boglea, A. Olowinsky
Laserdurchstrahlschweissen von Thermoplasten
Laser Technik J.
5, Nr 4, 28-32, 2008

B. Burbaum, P. Albus, I. Kelbassa
Laser cladding of mesh structures on HPT liner and NGV parts
27th In. Congr. on Applications of Lasers & Electro-Optics, ICALEO, Temecula/Ca., October 20-23, 2008
3 S., 2008

R. Noll, V. Sturm, Ü. Aydin, D. Eilers, C. Gehlen, M. Höhne, A. Lamott, J. Makowe, J. Vrenegor
Laser induced breakdown spectroscopy - from research to industry, new frontiers for process control
Spectrochim. Acta Part B
63, 1159-1166, 2008

F. Schmitt, A. Prießner, B. Krämer, A. Gillner
Laser joining photovoltaic modules
Ind. Laser Solutions
23, 20-23, 2008

A. Gillner
Laser micro processing
Laser Technik J.
5, 27-30, 2008

W.Schulz, H. Weber, R. Poprawe (Eds.)
Laser Systems Pt 2.
W. Schulz; H. Weber, R. Poprawe (Eds.): New Series Landolt-Börnstein, Group VIII/1: Advanced Materials and Technologies, Volume 1: Laser Physics and Applications, Subvolume VIII/1B 2
Berlin: Springer 2008

F. Sari, M. Wiemer, M. Bernasch, J. Bagdahn
Laser transmission bonding of silicon-to-silicon and silicon-to-glass for wafer level packaging and Microsystems
ECS Trans.
16, 561-568, 2008

G.A. Krombach, M. Wehner, A. Perez-Bouza, L. Kaimann, S. Kinzel, T. Plum, D. Schibur, M. Friebe, R.W. Günther, C. Hohl
Magnetic resonance-guided angioplasty with delivery of contrast-media doped solutions to the vessel wall: an experimental study in swine
Invest. Radiol.
43, 530-537, 2008

Kelbassa, I., Albus, P., Dietrich, J., Wilkes, J.
Manufacture and repair of aero engine components using laser technology
3rd Pacific International Conference on Applications of Lasers and Optics (PICALO), 2008
2008

J. Gottmann, L. Moiseev, I. Vasilief, D. Wortmann
Manufacturing of Er:ZBLAN ridge waveguides by pulsed laser deposition and ultrafast laser micromachining for green integrated lasers
Mat. Sci. Eng. B
146, 245-251, 2008

J. Gottmann, D. Wortmann, R. Wagner
Manufacturing of periodical nanostructures by fs-laser direct writing
Proc. SPIE
7022, 702202-1-702202-10, 2008

K. Walther, M. Brajdic, J. Dietrich, M. Hermans, M. Witty, A. Horn, I. Kelbassa, R. Poprawe
Manufacturing of shaped holes in multi-layer plates by laser drilling
Proc. 3rd Pacific Int. Conf. on Application of Lasers and Optics
pp. 789-794, 2008

M. Brajdic, M. Hermans, M. Kaminsky, I. Kelbassa
Measurement of plasma and shock-wave dynamics and properties inside holes during laser drilling of metals
Proc. of the 27th Int. Conf. on Applications of Lasers and Electro-Optics 2008, ICALEO, Temecula, CA, October 20-23, Paper 110
6 S., 2008

N. Pirch, K. Wissenbach
Mechanisms during laser bending
J. Laser Appl.
20, Nr 3, 135-139, 2008

D. Wortmann, J. Gottmann, N. Brandt, H. Horn-Solle
Micro- and nanostructures inside sapphire by fs-laser irradiation and selective etching
Opt. Expr.
16, Nr 3, 1517-1522, 2008

Beckemper, S., Bremus-Köberling, E., Gillner, A., Höges, S., Poprawe, R., Wissenbach, K.
Mit Licht Werkstoffe funktionalisieren. Neue Fertigungstechniken ermöglichen künstliche Bauteile nach dem Vorbild der Natur
RWTH Themen 01/2008
52-54, 2008

A. C. Spiess, M. Zavrel, M. B. Ansorge-Schumacher, C. Janzen, C.Michalik, T. W. Schmidt, T. Schwendt, J. Büchs, R. Poprawe, W. Marquardt
Model discrimination for the propionic acid diffusion into hydrogel beads using lifetime confocal laser scanning microscopy
Chem. Eng. Sci.
63, 3457-3465, 2008

C. Janzen, A. Lenenbach, P. Jander, R. Noll
Neue Lasermesssysteme für bioanalytische und klinisch-diagnostische Aufgabenstellungen
VDI-BERICHTE
2011, 307-314, 2008

A. Horn, I. Mingareev, A. Werth, M. Kachel, U. Brenk
Non-interferometric transient quantitative phase microscopy for ultrafast engineering
Appl. Phys. A
93, 165-169, 2008

R. Noll, M. Krauhausen
Online laser measurement technology for rolled products
Ironmaking & Steelmaking
35, 221-227, 2008

R. Noll, M. Krauhausen
Online Lasermesssysteme für die Stahl- und Automobilindustrie
Düsseldorf: VDI 2008
VDI-Berichte. Bd 2011
pp. 3-12

R. Noll, M. Krauhausen
Online-Prüfung von Bändern und Rohren
Bänder Bleche Rohre
49, 72-75, 2008

S. Kaierle, P. Abels, W. Fiedler, S. Mann, B. Regaard
Online-Qualitätssicherung für das Laserstrahlschweissen
MB-Revue 132-135 (2008)

R. Poprawe, I. Kelbassa, K. Walther, M. Witty, D. Bohn, R. Krewinkel
Optimising and manufacturing a laser-drilled cooling hole geometry for effusion-cooled multi-layer plates
12th Int. Symp. Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawai, February 17-22, 2008
11 S., 2008

A. Lenenbach, S. Hölters, R. Noll
Optisches Online-Messverfahren zur Überwachung von Wandstärken an Stückgütern in der kunststoffverarbeitenden Industrie
VDI-BERICHTE
2011, 33-41, 2008

E. Wagenaars, F. Küpper, J. Klein, W. Neff, M. Damen, P. van der Wel, D. Vaudrevange, J. Jonkers
Power scaling of an extreme ultraviolet light source for future lithography
Appl. Phys. Lett.
92, 181501-1-181501-3, 2008

S. Kaierle
Process monitoring and control of laser beam welding
Laser Technik J.
5, Nr 3, 41-43, 2008

C. Vedder, J. Stollenwerk, N. Pirch, K. Wissenbach
Production technology for transparent and conducting nano layers
Proc. of the 27th Int. Conf. on Applications of Lasers and Electro-Optics 2008, ICALEO, Temecula/CA. October 20th-23rd, Paper N303
5 S., 2008

D. M. Mahlmann, J. Jahnke, P. Loosen
Rapid determination of the dry weight of single, living cyanobacterial cells using the Mach-Zehnder double beam interference microscope
Eur. J. Phycol.
43 Nr 4, 355-364, 2008

D. Buchbinder, W. Meiners, K. Wissenbach, K. Müller-Lohmeier, E. Brandl
Rapid Manufacturing of Aluminium Parts for Serial Production via Selective Laser Melting (SLM)
In: Aluminium Alloys. Ed. J. Hirsch
Weinheim: Wiley-VCH 2008
7 S.

Buchbinder, D., Meiners, W., Wissenbach, K., Müller-Lohmeier, K., Brandl, E.
Rapid Manufacturing of Aluminium Parts for Serial Production via Selective Laser Melting (SLM)
11th International Conference on Aluminium Alloys (ICAA 11), 2008, Aachen
2008

P. Jander, R. Noll
Remote Raman detection of trace explosives
Proc. of the Future Security Res. Conf.
Karlsruhe
pp. 333-336, 2008

M. Haverkamp, G. Kochem, K. Boucke
Single mode fiber coupled tapered laser module with frequency stabilized spectrum
Proc. SPIE
6876, 68761D, 2008

J. Geiger, O. Fitzau, B. Zintzen, D. Hoffmann
Single-mode, highly polarized Y1456b-doped fiber laser with 850 W output power
ASSP 2008, Nara, Japan, Jan 27-30
3 S., 2008

M. Corthout, R. Apetz, J. Brudermann, M. Damen, G. Derra, O. Franken, J. Jonkers, J. Klein, F. Küpper, A. Mader, W. Neff [u.a.]
Sn DPP source-collector modules: status of alpha resources, beta developments, and the scalability to HVM
Proc. SPIE
6921,69210, 2008

Buchbinder, D.
So fest wie Druckguss-Teile
Industrieanzeiger 130, Nr. 48
2008

K. Bergmann, F. Küpper, M. Benk
Soft x-ray emission from a pulsed gas discharge in a pseudosparklike electrode geometry
J. Appl. Phys.
103, 123304-1-12304-8, 2008

Ü. Aydin, P. Roth, C. D. Gehlen, R. Noll
Spectral line selection for time-resolved investigations of laser-induced plasmas by an iterative Boltzmann plot method
Spectrochim. Acta Part B
63, 1060-1065, 2008

J. Powell, D. Petring, R.V. Kumar, S.O. Al-Mashikhi, A.F.H. Kaplan, K.T. Voisey
The energy generated by the oxidation reaction during laser-oxygen cutting of mild steel
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA, October 20-23, 2008
Laser Materials Processing Conference, Paper 1504, 628-636, 2008

D. Petring, F. Schneider, N. Wolf, V. Nazery
The relevance of brightness for high power laser cutting and welding
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA, October 20-23, 2008
Laser Materials Processing Conference, Paper 206, 95-103, 2008

G. Bianucci, A. Brunton, G.L. Cassol, G. Pirovano, F. Zocchi, A. Mader, O. Franken, K. Bergmann, H. Scheuermann, P. Zink
Thermal and optical characterization of collectors integrated in an Sn-DPP based SoCoMo
Proc. SPIE
6921, 692112-692120, 2008

M. Leers, K. Boucke, M. Götz, A. Meyer, M. Kelemen, N. Lehmann, F. Monti di Sopra
Thermal resistance in dependence of diode laser packages
Proc. SPIE
6876, 10 S., 2008

D. Gehlen, R. Roth, Ü. Aydin, E. Wiens, R. Noll
Time resolved investigations of laser-induced plasmas generated by nanosecond bursts in the millijoule burst energy regime
Spectrochim. Acta Part B
63, 1072-1076, 2008

I. Mingareev, A. Horn
Time-resolved investigations of plasma and melt efections in metals by pump-probe shadowgraphy
Appl. Phys. A
92, 917-920, 2008

M. Hörstmann-Jungemann, J. Gottmann ,D. Wortmann,
Time resolved measurement of the dielectric function during direct fs-laser writing of SiO2 and sapphire
Proc. LPM2008 - 9th Int. Symposium on Laser Precision Microfabrication
5 S., 2008

Schleifenbaum, H., Meiners, W., Wissenbach, K.
Towards rapid manufacturing for series production: An ongoing process report on increasing the build rate of selective laser melting (SLM)
Euro-uRapid 2008: International User's Conference on Rapid Prototyping & Rapid Tooling & Rapid Manufacturing, 2008
2008

P. Abels, A. Roesner, S. Kaierle, S. Mann, A. Olowinsky, N. Matsuo, A. Hino
Various process monitoring approaches of transparent thermoplastics laser beam welding
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA, October 20-23, 2008
99-104, 2008

J. Luttmann, K. Nicklaus, V. Morasch, S. Fu, M. Höfer, M. Traub, H.-D. Hoffmann, R. Treichel, C. Wührer, P. Zeller
Very high-efficiency, frequency-tripled Nd:YAG MOPA for spaceborne lidar
Proc. SPIE
6871, 12 S., 2008

J. Gedicke, A. Olowinsky, U. Jansen, W. Schulz, A. Gillner
Weld depth control in fiber laser welding of thin metal sheets
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA,
October 20-23, 2008

C. Wessling, S. Hengesbach, J. Geiger, J. Dolkemeyer, M. Traub, D. Hoffmann
50 W passively cooled, fiber coupled diode laser at 976 nm for pumping fiber lasers using 100 µm fiber bundles
Proc. SPIE
6876, 11 S., 2008

R. Schmitt, B.E. Damm, L. Juschkin
Mit weicher Röntgenstrahlung hochgenau messen
In: Optische Messung technischer Oberflächen in der Praxis
Düsseldorf: VDI-Verl.
VDI-Berichte 1996
329-337, 2007

S. Kaierle, W. Fiedler, B. Regaard, M. Dahmen
Anwendung brillianter Diodenlaser beim Schweißen von Aluminium-Dünnblechen
Laser Technik Journal
2, 35-38, 2007

S.Kaierle, M. Dahmen, S. Mann, R. Poprawe
Autonomous Production Cell for Laser Beam Welding
Proc. Int. Conf. on Competitive Manufacturing "COMA 07", Stellenbosch, Südafrika
6 S., 2007

R. Noll, M. Krauhausen
Autoteile unter Laseraugen
Laser + Photonik
2, 30-33, 2007

Johnigk, C.
Berührungslos - präzise - steuerbar
MO Metalloberfläche
61, 24-27, 2007

J. Geiger, B. Erben, D. Hoffmann, S. Altmeyer
Characterization of high power multimode combiners
CLEO Europe 2007, Munich, Germany, June 18-21
1 S., 2007

C. Franz, S. Mann, S. Kaierle
Comparison of process monitoring strategies for laser transmission welding of plastics
Proc. of ICALEO 2007, Orlando, Fl.
602-606, 2007

M. Dahmen, W. Fiedler, B. Regaard, S. Kaierle
Continuous process control during laser beam welding of small section Aluminium sheet
Proc. of WLT Conf. Lasers in Manufacturing, Munich
5 S., 2007

R. Noll, M. Krauhausen
Den Bewegungszustand des Blechs einfrieren
QZ Qualität und Zuverlässigkeit
52, 36-40, 2007

B. Jungbluth, M. Vierkoetter, M. Hoefer, J. Loehring, D. Oberbeckmann, D. Hoffmann
Design and characterization of a rugged and compact setup for widely tunable harmonic generation in the ultraviolet
Proc. SPIE
6455, 1-10, 2007

J. Loehring, K. Nicklaus, N. Kujath, D. Hoffmann
Diode pumped Nd:YGG laser for direct generation of pulsed 935 nm radiation for water vapour measurements
Proc. SPIE
6451, in print, 2007

B. Zintzen, A. Emmerich, J. Geiger, D. Hoffmann, P. Loosen
Effective cooling for high-power fiber lasers
Proc. of the 4th Int. WLT-Conf. on Lasers in Manufacturing , Munich, June 2007
5 S., 2007

B. Regaard, W. Fiedler, S. Kaierle
Error detection in lap welding applications using on-line melt pool contour analysis by coaxial process monitoring with external illumination
Proc. of WLT Conf. Lasers in Manufacturing, Munich
5 S., 2007

M. Haverkamp, K. Wieching, M. Traub, K. Boucke
Fiber-coupled diode laser modules with wavelengths around 2 µm
Proc. SPIE
6456, 9 S., 2007


C. Wessling, M. Traub, D. Hoffmann
Fiber coupled diode laser of high spectral and spatial beam quality with kW class output power
Proc. SPIE
6456, 1-7, 2007

I. Miyamoto, A. Horn, J. Gottmann, D. Wortmann, F. Yoshino
Fusion Welding of Glass Using Femtosecond Laser Pulses with High-repetition Rates
J. Laser Micro/Nanoeng.
2, 57-63, 2007

B. Zintzen, T. Langer, J. Geiger, D. Hoffmann, P. Loosen
Heat transport in solid and air-clad fibers for high-power fiber lasers
Opt. Expr.
15, 16787-16793, 2007

E. W. Kreutz, K. Walther, R. Poprawe, S. Angel, E. Ratte, W. Bleck, K. Bobzin, E. Lugscheider, R. Nickel, K. Richardt, N. Bagcivan
High-temperature turbine applications using open porous metallic foams with thermal barrier coatings and cooling hole arrays
ISCORMA-4, Calgary/Alberta, Canada
27-31 August 2007
11 S., 2007

K. Walther, M. Brajdic, I. Kelbassa
Increase of drilling velocity by use of superposed laser radiation
Proceedings of 4th International WLT-Conference on Lasers in Manufacturing, Munich, June 2007
4 S., 2007

D. Petring
Integriertes Laserstrahlschneiden und -schweißen: Reduzierung von Nebenzeiten und Systemaufwand
EALA 2007, Bad Nauheim
15 S., 2007

P. Albus, B. Burbaum, I. Kelbassa
Laser cladding of mesh structures on HPT liner and NGV parts
Proc. of 4th Int. WLT-Conf. on Lasers in Manufacturing 2007, Munich, June
3 S., 2007

J. Gottmann, L. Moiseev, D. Wortmann, I. Vasilief, L. Starovoytova, D. Ganser, R. Wagner
Laser deposition and laser structuring of laser active planar waveguides of Er:ZBLAN, Nd:YAG and Nd:GGG for integrated waveguide lasers
Proc. SPIE
6459, 10 S., 2007

M. Wehner, P. Jacobs, D. Esser, H. Schinkel, S. Schillberg
Laser-mediated perforation of plant cells
Proc. SPIE
6632, 9 S., 2007

M. Wehner, T. Mans, W. Meiners, A. Lenenbach, C. Wessling, R. Poprawe
Lasertechnik für die Zahnmedizin
Laserzahnheilkunde
3, 191-198, 2007

R. Noll
Lasertriangulation
In: Handbuch zur Industriellen Bildverarbeitung. Hrsg.: N. Bauer. Fraunhofer IRB Verl.
56-60, 2007

R. Noll, M. Krauhausen
Lasertriangulation für die Online-Messung geometrischer Größen in der Produktion
In: Handbuch zur Industriellen Bildverarbeitung. Hrsg.: N. Bauer. Fraunhofer IRB Verl.
260-275, 2007

I. Miyamoto, A. Horn, J. Gottmann
Local Melting of Glass Material and Its Application to Direct Fusion Welding by Ps-laser Pulses
J. Lasermicro/Nanoeng.
2, 7-14, 2007

J. Gottmann, D. Wortmann, I. Vasilief, L. Moiseev, D. Ganser
Manufacturing of Nd:Gd3Ga5O12 ridge waveguide lasers by pulsed laser deposition and ultrafast laser micromachining
Appl. Surf. Sci.
254, 1105-1110, 2007

L. Peter, R. Noll
Material ablation and plasma state for single and collinear double pulses interacting with iron samples at ambient gas pressures below 1 bar
Appl. Phys. B
86, 159-167, 2007

T. Jambor, K. Wissenbach
Micro laser cladding with high quality fibre lasers
Proc. 4th Int. WLT-Conf. on Lasers in Manufacturing, Munich, Germany, June 2007
193-197, 2007

M. Hoefer, M. Traub, R. Kleindienst, H. Sipma, H.-D. Hoffmann, P. Wessels, P. Burdack
Multi ten-watt, ultra-stable, and tuneable Innoslab-based single frequency MOPA
Proc. SPIE
6451, 7 S., 2007

D. Petring, H. Dickler
Multifunktionaler Laserbearbeitungskopf
MM Maschinenmarkt
22, 34-36, 2007

D. Petring, H. Dickler
Nebenzeiten senken und Flexibilität steigern
Technica
56, Nr 06/07, 72-74, 2007

P. Albus, A. Boglea, B. Burbaum, J. Holtkamp, I. Kelbassa, V. Nazery-Goneghany, A. Olowinsky, D. Petring, M. Poggel, F. Schmitt, F. Schneider, N. Wolf, R. Poprawe
Neue Schweißtechnologien mit neuen Lasern
Proc. of 10th International Aachen Welding Conference iASTK´07
229-242, 2007

M. Leers, C. Scholz, K. Boucke, M. Oudart
Next generation heat sinks for high-power diode laser bars
Semiconductor Thermal Measurement and Management Symposium, 2007
SEMI-THERM 2007. 23. Annual IEEE
105-111 (2007)

M. Leers, K. Boucke, C. Scholz, T. Westphalen
Next generation of cooling approaches for diode laser bars
Proc. SPIE
6456, 10 S., 2007

M. Traub, M. Bock, H.-D. Hoffmann, M. Bartram
Novel high peak current pulsed diode laser sources for direct material processing
Proc. SPIE
6456, in print, 2007


V. Sturm, A. Brysch, R. Noll
Online Multielement Analysis of the Top Gas of a Blast Furnace by Laser-induced Breakdown Spectroscopy (LIBS)
Berg- und Hüttenmännische Monatsh.
1, 28-32, 2007

R. Noll, M. Krauhausen
Online-Lasermesstechnik für Walzprodukte
stahl und eisen
127, 99-105, 2007

S. Angel, E. Ratte, W. Bleck, K. Bobzin, E. Lugscheider, R. Nickel, K. Richardt, N. Bagcivan, N., K. Walther, E.W. Kreutz, I. Kelbassa, R. Poprawe
Open porous metallic foams with thermal barrier coating and cooling hole array for high temperature turbine applications
High Temp. Mat. Proc.
11, 321-344, 2007

V. Sturm
Optical micro-lens array for laser plasma generation in spectrochemical analysis
J. Anal. Atom. Spectr.
22, 1495-1500, 2007

E. Willenborg
Polieren mit Laserstrahlung
Kunststoffe
97 , 63-66, 2007

I. Kelbassa, K. Walther, L. Trippe, W. Meiners, C. Over
Potentials of manufacture and repair of nickel base turbine components used in aero engines and power plants by laser metal deposition and laser drilling
J. Aerospace Power
22, 739-748, 2007

W. Fiedler, M. Dahmen, S. Kaierle
Process control of laser beam welded small section aluminum sheets
Proc. of ICALEO 2007, Orlando, Fl.
271-276, 2007

E.W. Kreutz, L. Trippe, K. Walther, R. Poprawe
Process development and control of laser drilled and shaped holes in turbine components
J. Lasermicro/Nanoeng.
2, 123-127, 2007

D. Petring, C. Fuhrmann, N. Wolf, R. Poprawe
Progress in Laser-MAG hybrid welding of high-strength steels up to 30 mm thickness
Proc. of 26th Int. Congress on Applications of Lasers & Electro-Optics ICALEO, October 29 - November 1, 2007, Orlando, Fl.
300-307, 2007

J. Wilkes, K. Wissenbach
Rapid Manufacturing of ceramic components by selective laser melting
Proc. 4. Int. WLT-Conf. on Lasers in Manufacturing, Munich, Germany, June 2007
207-211, 2007

D. Buchbinder, W. Meiners, K. Wissenbach, K. Müller-Lohmeier, E. Brandl
Rapid manufacturing von Aluminiumbauteilen für die Serienproduktion durch Selective Laser Melting (SLM)
Euro-uRapid2007, Frankfurt/M., December 3-4, 2007
6 S., 2007

D. Wortmann, M. Ramme, J. Gottmann
Refractive index modification using fs-laser double pulses
Opt. Expr.
15, 10149-10153, 2007

S. Höges, W. Meiners
Selective Laser Melting
Proc. 41. Jahrestagung Dt. Ges. f. Biomed. Technik im VDE, Aachen, Germany, September 2007
2 S., 2007

M. Traub, H.-D. Plum, H.-D. Hoffmann, T. Schwander
Spaceborne fiber coupled diode laser pump modules for intersatellite communications
Proc. SPIE
6736, in print, 2007

R. Wagner, J. Gottmann
Sub-wavelength ripple formation on various materials induced by tightly focused femtosecond laser radiation
8th International Conference on Laser Ablation
J. Phys.: Conference Series
59, 333-337, 2007

D. Wortmann, L. Moiseev, I. Vasilief, D. Ganser,L. Starovoytova, J. Gottmann
Waveguide lasers of Er:ZBLAN and Nd:GGG by pulsed laser deposition and fs-laser microstructuring
Proc. 4th Int. WLT-Conf. on Lasers in Manufacturing 2007, Munich, June
821-826, 2007

C. Schnitzler, S. Hambuecker, O. Ruebenach, V. Sinhoff, G. Steckman, L. West, C. Wessling, D. Hoffmann
Wavelength stabilization of HPDL array: fast-axis collimation optic with integrated VHG
Proc. SPIE
6456, 1-7, 2007

W. Meiners, A. Weisheit
Werkstoff-Kompromisse passé?
Form + Werkzeug
5, 78-81, 2007

M. Haverkamp, G. Kochem, K. Boucke, E. Schulze, H. Roehle
1.1W Four-wavelength Raman pump using BH lasers
Optical Fiber Communication and the National Fiber Optic Engineers Conf., 2007. OFC/NFOEC 2007
1-3, 2007

N. C. Stache, H. Zimmer, J. Gedicke, B. Regaard, A. Olowinsky, A. Knepper, T. Aach
Approaches for High-Speed Melt Pool Detection in Laser Welding Applications
Proceedings of VMV 11
217-224
(2006)

Ü. Aydin, R. Noll, J. Makowe
Automatic sorting of aluminium alloys by fast LIBS identification
Progress in Analytical Chemistry in the Steel and Metal Industries 7
309-314
(2006)

D. Petring
Combined cutting and welding: Laser beam quality enhances process efficiency and flexibility
Tagungsband-CD zum 2. Internationalen Workshop "Faserlaser" in Dresden
34 Seiten
(2006)

J. Gedicke, B. Regaard, K. Klages, A. Olowinsky, S. Kaierle
Comparison of different process monitoring methods for laser beam micro welding
Proceedings of ICALEO 2006
8 Seiten
(2006)

C. Scholz, K. Boucke, R. Poprawe, M. T. Kelemen, J. Weber, M. Mikulla, G. Weimann
Comparison between 50 W tapered laser arrays and tapered dingle emitters
Proceedings of SPIE 6104
61040G.1-61040G.8
(2006)

C. Wessling, M. Traub, D. Hoffmann, R. Poprawe
Dense wavelength multiplexing for high power diode laser
Proceedings of SPIE 6104
61040O.1-61040O.8
(2006)

R. Liebers, U. Dürr, L. Trippe, W. Schulz
Drilling strategies for metals with pulsed YAG lasers
Proceedings of ICALEO 2006
6 Seiten
(2006)

K. Walther, M. Brajdic, E. W. Kreutz
Enhanced processing speed in laser drilling of stainless steel by spatially and temporally superposed pulsed Nd:YAG laser radiation
The International Journal of Advanced Manufacturing Technology
5 Seiten/Online first
(2006)

M. Leers, C. Scholz, K. Boucke, R. Poprawe
Expansion-matched passively-cooled heatsinks with low thermal resistance for high-power diode laser bars
Proceedings of SPIE 6104
610403.1-610403.10
(2006)

R. Wester, R. Noll
Fast Characterisation of Steel Cleanness by Advanced Mathematical Analysis of Spark and Laser Source Optical Emission Data
Progress in Analytical Chemistry in the Steel and Metal Industries 7
209-212
(2006)

D. Petring
Flexibles Laserschneiden und -schweißen von Blechbaugruppen ohne Werkzeugwechsel
Tagungsband-CD zum Aachener Kolloquium für Lasertechnik AKL'06
22 Seiten
(2006)

R. Noll, V. Sturm, M. Stepputat, A. Whitehouse, J. Young, P. Evans
Industrial applications of LIBS.
Laser-Induced Breakdown Spectroscopy (LIBS): Fundamentals and Applications
Ed. A.W. Miziolek, V. Palleschi, I. Schechter
Cambridge: Cambridge Univ. Pr. (2006)
400-439
(2006)

M. Traub, H.-D. Hoffmann, H.-D. Plum, K. Wieching, P. Loosen, R. Poprawe
Homogenization of high power diode laser beams for pumping and direct applications
Proceedings of SPIE 6104
61040Q.1-61040Q.10
(2006)

R. Noll, V. Sturm, M. Stepputat, A. Whitehouse, J. Young, P. Evans
Industrial applications of LIBS
Laser-Induced Breakdown Spectroscopy (LIBS):
Fundamentals and Applications
Cambridge: Cambridge University Press
400-439
(2006)

J. Gedicke, B. Regaard, A. Gillner, S. Kaierle
Kontrolle beim Mikroschweißen - Automatisierte Prozessüberwachung durch koaxiale Prozesskontrolle mit Fremdbeleuchtung
Laser Technik Journal 3
33-37
(2006)

E.W. Kreutz, J. Willach, I. Kelbassa, S. Keutgen, R. Poprawe
Laser Technologies for Manufacturing and Repair of Rotating Machinery Power Plant Components
Proceedings of ISROMAC 11
8 Seiten
(2006)

I. Kelbassa, A. Weisheit, K. Wissenbach, V. Hermes
Laser metal deposition of tial alloys
Proceedings of PICALO 2
5 Seiten
(2006)

E. Haberstroh, W.-M. Hoffmann, R. Poprawe, F. Sari
Laser transmission joining in microtechnology
Microsystem Technologies 12
632-639
(2006)

A. Löbe, J. Vrenegor, R. Fleige, V. Sturm, R. Noll
Laser-induced ablation of a steel sample in different ambient gases by use of collinear multiple laser pulses
Analytical & Bioanalytical Chemistry 385
326-332 
(2006)

R. Noll, U. Panne
Laser-induced breakdown spectroscopy - EMSLIBS 2005
Analytical & Bioanalytical Chemistry 385
212-213 
(2006)

R. Noll
Lasermesstechnik reagiert besonders schnell
Praxis Profiline - Berührungslose Messtechnik 1
15-17
(2006)

D. Petring
Laserschneiden und -schweissen im fliegenden Wechsel
Technische Rundschau 16
38-41
(2006)

D. Petring
Lasers in European Automotive Manufacturing: Historical Review and Recent Trends
Proceedings of ALAW 2006
16 Seiten
(2006)

E. W. Kreutz, J. Willach, I. Kelbassa, S. Keutgen,
R. Poprawe
Laser technologies for manufacturing and repair of rotating machinery power plant components
Proceedings of ISROMAC 11
8 Seiten
(2006)

A. Gillner, K. Klages, F. Sari
Mikrofügen mit Laserstrahlung
Laser Technik Journal 3
39-43
(2006)

K. Nicklaus, M. Hoefer, D. Hoffmann, J. Luttmann, R. Wester,
R. Poprawe
MOPA with kW average power and multi MW peak power: experimental results, theoretical modeling and scaling limits
Proceedings of SPIE 6100
610416.1-610416.11
(2006)

J. Ilgner, M. Wehner, J. Lorenzen, M. Bovi, M. Westhofen
Morphological effects of nanosecond- and femtosecond-pulsed laser ablation on human middle ear ossicles
Journal of Biomedical Optics 11
41-47
(2006)

H. Balzer, M. Höhne, R. Noll, V. Sturm
New approach for online monitoring of the Al depth profile of the hot-dip galvanised sheet steel using LIBS
Analytical & Bioanalytical Chemistry 385
225-233
(2006)

T. Ebert, W. Meiners, M. Pajunk
Non corrosive micro coolers with matched CTE
Proceedings of SPIE 6104
01.1-01.7
(2006)

H. Balzer, M. Hoehne, S. Hoelters, V. Sturm,
R. Noll, E. Leunis, S. Janssen, M. Raulf,
P. Sanchez, M. Hemmerlin
Online depth profiling of zinc coated sheet steel by laser-induced breakdown spectroscopy
Progress in Analytical Chemistry in the Steel and Metal Industries 7
237-242
(2006)

V. Sturm, A. Brysch, R. Noll, H. Brinkmann, R. Schwalbe,
K. Mülheims, P. Luoto, P. Mannila, K. Heinänen,
D. Carrascal, L. Sancho, A. Opfermann, K. Mavrommatis,
H. W. Gudenau, A. Hatziapostolou, S. Couris
Online multi-element analysis of the top gas of a blast furnace by LIBS
Proceedings of the 7th International Workshop
"Progress in Analytical Chemistry in the Steel and Metal Industries
183-188
(2006)

K. Nicklaus, M. Daniels, R. Hohn, D. Hoffmann
Optical Isolator for Unpolarized Laser Radiation at Multi-Kilowatt Average Power
Technical Digest - OSA "Advanced Solid-State Photonics" (ASPP) 2006
3 Seiten
(2006)

I. Kelbassa, K. Walther, L. Trippe, W. Meiners, C. Over
Potentials of manufacture and repair of nickel base turbine components used in aero engines and power plants by laser metal deposition and laser drilling
Proceedings of ISJPPE 2025
9 Seiten
(2006)

J. Vrenegor, V. Sturm, R. Noll, M. Hemmerlin, 
U. Thurmann, J. Flock
Preparation and analysis of production control samples by a two-step method
Proceedings of the 7th International Workshop "Progress in Analytical Chemistry in the Steel and Metal Industries"
81-86
(2006)

L. Trippe, K. Walther, E.W. Kreutz,  R. Poprawe
Process development and control of laser drilled and shaped holes in turbine components
Proceedings of LAMP 2006
5
(2006)

R. Poprawe, E. W. Kreutz, L. Trippe, K. Walther
Process development for laser drilled hole arrays in cooled structures
Tagungsband zum 3. Workshop
des SFB 561
DFG
34-38
(2006)

I. Kelbassa, C. Over, L. Trippe, E.W. Kreutz,
K. Wissenbach
Reconditioning of nickel base HPT blades and vanes used in aero engines and power plant gas turbines by combination of direct laser forming, laser metal deposition and laser drilling
Proceedings of PICALO 2006
7
(2006)

B. Regaard, S. Kaierle, R. Poprawe
Self guided laser welding
Proceedings of ICALEO 2006
7 Seiten
(2006)

R. Noll, C. Fricke-Begemann
Stand-off Detection of Surface Contaminations with Explosive Residues Using Laser-spectroscopic Methods
Stand-off Detection of Suicide Bombers and Mobile Subjects
(Eds.: H. Schubert, A. Rimski-Korsakov)
Springer-Verlag
89-99
(2006)

R. Wagner, J. Gottmann, A. Horn, E. W. Kreutz
Subwavelength ripple formation induced by tightly focused femtosecond laser radiation
Applied Surface Science 252
8576-8579
(2006)

H. Balzer,S. Hölters, V. Sturm, R. Noll
Systematic line selection for online coating thickness measurement of galvanised sheet steel using LIBS
Analytical & Bioanalytical Chemistry 385
234-239
(2006)

R. Noll
Terms and notations for laser-induced breakdown spectroscopy
Analytical & Bioanalytical Chemistry 385
214-218
(2006)

J. Ilgner, M. Wehner, A. Donner, P. Düwel,
R. Poprawe, M. Westhofen
200µm glass fibres for minimally invasive laser procedures in paranasal sinus surgery
Medical Laser Application 21
45-51
(2006)

F. Sari, A. Gillner, R. Poprawe, M. Rupf
Advances in selective laser radiation bonding of silicon and glass for microsystems
Proceedings of Lasers in Manufacturing 3
Seiten 791-796
(2005)

B. Regaard, S. Kaierle, W. Schulz, A. Moalem
Advantages of coaxial external illumination for monitoring and control of laser materials processing
Proceedings of ICALEO 2307
Seiten 915-919
(2005)

R. Poprawe, A. Gillner, A. Olowinsky, L. Bosse
Aktive Laserstrahljustage
Montage hybrider Mikrosysteme - Handhabungs- und Fügetechniken für die Klein- und Mittelserienfertigung
Seiten 53-56
(2005)

F. Schneider, D. Petring
Aktuelle Fortschritte und on-line Prozessüberwachung beim Laserstrahlschneiden
Tagungsband zum Aachener Laser Seminar 'Innovative Laserschneid- und Laserschweißprozesse für die Metallverarbeitung'
(2005)

C. Janzen, R. Fleige, R. Noll, H. Schwenke,
W. Lahmann, J. Knoth, P. Beaven, E. Jantzen,
A. Oest, P. Koke
Analysis of small droplets with a new detector for liquid chromatography based on laser-induced breakdown spectroscopy
Spectrochimica Acta Part B 60
Seiten 993-1001
(2005)

D. Petring
Aus zwei mach eins - Flexibler Kombikopf ermöglicht das Laserschneiden und -schweißen im fliegenden Wechsel
MM-Maschinenmarkt 36
Seiten 214-217
(2005)

K. Bergmann, O. Rosier, C. Maetzmacher
Compact extreme ultraviolet reflectometer for the characterization of grazing incidence optics based on a gas discharge light source
Scientific Instruments 76
Seiten 104-109
(2005)

D. Petring
Computer simulation of laser cutting for the limiting-value-oriented development of robust processes
Welding and Cutting 4, No. 1
Seiten 37-42
(2005)

R. Noll, I. Mönch, O. Klein, A. Lamott
Concept and operating performance of inspection machines for industrial use based on laser-induced breakdown spectroscopy
Spectrochimica Acta Part B 60
Seiten 1070-1075
(2005)

D. Petring
Der Kombikopf: Laserschweißen und -schneiden ohne Werkzeugwechsel
Tagungsband zum 1. EMO Anwenderforum Lasertechnik (2005)

E. W. Kreutz, W. Schulz
Diagnosis and modelling of nonlinear dynamics in laser cutting, welding and drilling
Proceedings of NAFEMS 2005
(2005)

R. Poprawe, P. Loosen, H.-D. Hoffmann
Diode and DPSS laser trends and applications
The Industrial Laser User 38
Seiten 18-21
(2005)

W. Schulz, J. Petereit, E. W. Kreutz, L. Trippe,
U. Eppelt
Drillilng model for µs-pulses
Proceedings of Lasers in Manufacturing 3
(2005)

A. Bollig, S. Mann, R. Beck, S. Kaierle
Einsatz optischer Technologien zur. Regelung des Laserstrahlschweiß-prozesses
at - Automatisierungstechnik 10
Seiten 513-521
(2005)

D. Petring
Flexibilität beginnt im Kopf
Bänder Bleche Rohre 46 06/07
Seiten 28-30
(2005)

D. Petring
Flexibility starts in laser welding and cutting
WIRE 4
Seiten 47-48
(2005)

D. Petring
Flexibility starts in your head - Laser welding and cutting with the combi-head
Australasian Welding Journal 50
Seite 21
(2005)

D. Petring
Flexibility starts in your head - Laser welding and cutting with the combi-head
Welding Technology
(Yosetsu Gijutsu) 53, No. 11
Seiten 84-88
(2005)

F. Schneider, D. Petring
Flexible Fertigung von Blechbaugruppen: effizient Laserstrahlschweißen und -schneiden mit dem Kombikopf
Tagungsband zum Aachener Laser Seminar 'Innovative Laserschneid- und Laserschweißprozesse für die Metallverarbeitung'
(2005)

T. Kiedrowski, E. Willenborg, K. Wissenbach, S. Hack
Generation of design structures by selective polishing with laser radiation
Proceedings of Lasers in Manufacturing 3
Seiten 451-455
(2005)

H. Bette, R. Noll, G. Müller, H.-W. Jansen,
C. Nazikkol, H. Mittelstädt
High-speed scanning laser-induced breakdown spectroscopy at 1000 Hz with single pulse evaluation for the detection of inclusions in steel
Journal of Laser Applications 17
Seiten 183-190
(2005)

L. Bosse, S. Driessen, B. Engelmann, A. Gillner,
R. Poprawe, T. Pfeiffer, R. Schmitt
Inline-Verfahren
Montage hybrider Mikrosysteme - Handhabungs- und Fügetechniken für die Klein- und Mittelserienfertigung
Seiten 187-218
(2005)

F. Schneider, D. Petring, R. Poprawe
Integrated laser processing - cutting and welding with a combined processing head
Proceedings of Lasers in Manufacturing 3
Seiten 133-135
(2005)

J. Pankert, R. Apetz, K. Bergmann, G. Derra,
M. Janssen, J. Jonkers, J. Klein, T. Kruecken, A. List, M. Loeken, W. Neff, S. Probst, R. Prummer, O. Rosier, S. Seiwert, G. Siemons, D. Vaudrevange,
D. Wagemann, A. Weber, P. Zink, O. Zitzen
Integrating Philips' extreme UV source in the alpha-tools
Proceedings of SPIE 5751
Seiten 260-271
(2005)

J. Vrenegor, R. Noll, V. Sturm
Investigation of matrix effects in LIBS plasmas of high-alloy steel for matrix and minor elements
Spectrochimica Acta B 60
Seiten 1083-1091
(2005)

C. Benter, D. Petring, R. Poprawe
Investigation of the transition from heat conduction to deep penetration welding with High Power Diode Lasers
Proceedings of Lasers in Manufacturing 3
Seiten 67-72
(2005)

A. Gillner, J. Holfkamp, C. Hartmann, A. Olowinsky,
J. Gedicke, K. Klages, L. Bosse, A. Bayer
Laser applications in microtechnology
Journal of Materials Processing Technology 167
Seiten 494-498
(2005)

D. Petring
Laser cutting and welding with one tool
The FABRICATOR 10
Seiten 40-41
(2005)

F. Sari, W.-M. Hoffmann
Laserdurchstrahlfügen in der Mikrotechnik
Kolloquium Mikroproduktion - Fortschritte, Verfahren, Anwendungen
Seiten 71-84
(2005)

K. Wissenbach, A. Gasser, T. Jambor, C. Johnigk,
T. Kiedrowski, W. Meiners
Lasereinsatz im Werkzeug- und Formenbau für Kunststoffmikrobauteile - Anwendungspotentiale und Praxisbeispiele
Konferenzband zur DIF-Fachkonferenz: "Mikroformteile aus Kunststoff"
(2005)

B. Feddes, A. M. Vredenberg, M. Wehner,
J. C. G. Wolke, J. A. Jansen
Laser-induced crystallization of calcium phosphate coatings on polyethylene (PE)
Biomaterials 26
Seiten 1645-1651
(2005)

F. Fuhrmann, D. Petring
Laser-Lichtbogen Hybridschweißen: Stand der Technik und aktuelle Fortschritte
Tagungsband zum Aachener Laser Seminar 'Innovative Laserschneid- und Laserschweiß-prozesse für die Metallverarbeitung'
(2005)

D. Petring
Lasern mit dem Kombikopf auf dem Weg in die Praxis
BLECH InForm 4
Seiten 43-46
(2005)

D. Petring
Lasers in European Automotive Manufacturing: Historical Review and Recent Trends
The Industrial Laser User 39
Seiten 28-33
(2005)

A. Gillner, F. Sari, R. Poprawe, M. Wild
Laserstrahlbonden
Montage hybrider Mikrosysteme - Handhabungs- und Fügetechniken für die Klein- und Mittelserienfertigung
Seiten 91-102
(2005)

R. Poprawe, A. Gillner, L. Bosse
Laserstrahl-Löten
Montage hybrider Mikrosysteme - Handhabungs- und Fügetechniken für die Klein- und Mittelserienfertigung
Seiten 79-89
(2005)

D. Petring
Laserstrahlschneiden und -schweißen: Grundlagen für die Anwendung
Tagungsband zum Aachener Laser Seminar 'Innovative Laserschneid- und Laserschweißprozesse für die Metallverarbeitung'
(2005)

R. Poprawe
Lasertechnik für die Fertigung - Grundlagen, Perspektiven und Beispiele für den innovativen Ingenieur
VDI-Buch 526
Seiten 1-353
(2005)

A. Weisheit, G. Vitr, K. Wissenbach, J. Zajac,
H. Thoors, B. Johansson, E. Ribera, J. Arino, F. Sierra
Local heat treatment of ultra high strength steels to improve formability
Proceedings of IWOTE 1
Seiten 1-19
(2005)

A. Weisheit, G. Vitr, S. Scheffler, K. Wissenbach
Local heat treatment of ultra high strength steels to improve formability
Proceedings of Super-High Strength Steels
Seiten 1-10
(2005)

A. Gillner, J. Holtkamp, A. Bayer, P. Groche, R. Erhardt
Mikroumformen mit lokaler Bauteilerwärmung durch Laserstrahlung in transparenten Werkzeugen
Abschlussbericht zum DFG-Schwerpunktprogramm 1074 'Erweiterung der Formgebungsgrenzen bei Umformprozessen' 1074
Seiten 111-118
(2005)

K. Nicklaus, D. Hoffmann, M. Hoefer, J. Luttmann,
P. Loosen, R. Poprawe
MOPA with kW Average Power and Multi MW Pulse Power
OSA Technical Digest 98
Seiten 1-3
(2005)

T. Wirtz, M. von Walter, O. Schulz, K. Wissenbach
New possibilities for the design and manufacturing of bone implants with external and internal functional architecture
Proceedings of Lasers in Manufacturing 3
Seiten 515-519
(2005)

D. Petring
One head does it all
Welding Journal 8
Seiten 49-51
(2005)

H. Balzer, M. Hoehne, V. Sturm, R. Noll
Online coating thickness measurement and depth profiling of zinc coated sheet steel by laser-induced breakdown spectroscopy
Spectrochimica Acta Part B 60
Seiten 1172-1178
(2005)

M. Daniels, K. Nicklaus, H.-D. Hoffmann, S. Altmeyer
Polarization-independent isolation of high power laser radiation
Proceedings of Lasers in Manufacturing 3
Seiten 747-750
(2005)

S. Kaierle, P. Abels, C. Kratzsch
Process monitoring and control for laser materials processing - an overview
Proceedings of Lasers in Manufacturing 3
Seiten 101-105
(2005)

G. J. Schmitz, C. Brücker, P. Jacobs
Manufacture of high-aspect-ration micro-hair sensor arrays
Journal of Micromechanics and Microengineering (15)
Seiten 1904-1910
(2005)

M. Wehner, A.-F. Teutu-Kengne, D. Brkovic,
T. Henning, D. Klee, R. Poprawe, G. Jakse
Microsurgical anastomosis of sperm duct by laser tissue soldering
Proceedings of SPIE 5686
Seiten 226-233
(2005)

M. Wehner, S. Beckemper, P. Jacobs, S. Schillinger,
D. Schibur, A. Gillner
Processing of polycarbonate by high-repetition rate ArF excimer laser radiation
Proceedings of Lasers in Manufacturing 3
Seiten 557-561
(2005)

L. Bosse, N. Goebbels, R. Poprawe
Production cell for laser joining of microsystems with modular pick & join-tools
Proceedings of Lasers in Manufacturing 3
Seiten 785-789
(2005)

R. Lebert, B. Jaegle, C. Wies, U. Stamm,
J. Kleinschmidt, K. Gaebel, G. Schriever,
J. Pankert, K. Bergmann, W. Neff, A. Egbert
Progress on EUV-source development, tool integration and applications
Proceedings of SPIE 5835
Seiten 230-243
(2005)

C. Fuhrmann, D. Petring, R. Poprawe
Recent results on high power CO₂- and Nd:YAG-laser-arc hybrid welding of thick steel plates
Proceedings of Lasers in Manufacturing 3
Seiten 185-192
(2005)

P. Rußbüldt, T. Mans, R. Ritschel, D. Hoffmann
Röntgenstrahlung aus Laserstrahlung
Laser Technik Journal (5)
Seiten 86-88
(2005)

P. Loosen
Status and trends in the development of high-power diode lasers and their applications
Proceedings of SPIE 5777
(2005)

L. Bosse, A. Gillner, R. Poprawe
Temperature controlled selective soldering with laser radiation
Proceedings of LPM 2005
Seiten 185-190
(2005)

D. Petring, F. Schneider, C. Benter, R. Poprawe
The combi-head - truly flexible laser processing by cutting and welding in a single machine with a single tool
Proceedings of ICALEO 2005
Seiten 91-95
(2005)

F. Sari, A. Gillner
Thermal process control for laser radiation bonding of silicon and glass
Proceedings of 4M
(2005)

K. Bobzin, L. Bosse, A. Brandenburg, U. Dilthey,
A. Erdle, S. Ferrara , E. Lugscheider, M. Maes,
R. Poprawe, G. Smolka
Transient liquid phase bonding
Montage hybrider Mikrosysteme-Handhabungs - und Fügetechniken für die Klein- und Mittelserienfertigung Seiten 65-78
(2005)

M. Wehner, M. Schmidbauer, P. Jacobs
VUV-Laserbearbeitung zur Herstellung mikrotechnischer Produkte für Medizin und Mikrochemie - Abschlussbericht InnoNet IN2020
BMBF Forschungsbericht
Report Nr.16IN0064/16IN0065
Seiten 1-66
(2005)

C. Benter, D. Petring, R. Poprawe
Wärmeleitungs- und Tiefschweißen mit Hochleistungs-Diodenlasern
Tagungsband zum Aachener Laser Seminar 'Innovative Laserschneid- und Laserschweiß-prozesse für die Metallverarbeitung'
(2005)