Ko, M., Bueno Da Silveira, M., Gasser, A., Teichmann, E., Schopphoven, T., Häfner, C.:
Investigation and characterization of a local remelting process for the improvement of surface properties resulting from extreme high-speed directed energy deposition.
Journal of Laser Applications 36(3), 032032, (9 S.), (2024)
https://doi.org/10.2351/7.0001607 (Open Access)
Glushych, V., Dall, N., Zimmermann, M., Schopphoven, T., Meiners, W., Häfner, C.L.:
Fundamentals of Simultaneous Machining and Coating (SMaC) Through Combination of Extreme High-Speed Laser Material Deposition (EHLA) and Turning.
Journal of Laser Applications 36(4), 042037, (2024)
https://doi.org/10.2351/7.0001567 (Open Access)
Hauschopp, C., Borba de Souze, M., Kaierle, R., Häussler, A., Schopphoven, T., Meiners, W., Häfner, C.:
Process development and heat flow analysis for thin walls made of aluminum using extreme high-speed laser material deposition (EHLA3D).
Journal of Laser Applications 34(3), 042052, (2024)
https://doi.org/10.2351/7.0001608 (Open Access)
Müller, B.; Backes, G.; Küppers, W.; Kittel, J.; Pirch, N.; Hemes, S.; Pedersen,M.; Hatzoglou, C.; Kontis, P.:
The Effect of a Laser-Based Heat Treatment on the Microstructure of a Superalloy After a Minimally Invasive Repair by Direct Energy Deposition.
In: Cormier, J., et al. Superalloys 2024. ISS 2024. The Minerals, Metals & Materials Series. Springer, Cham., 1002–1012, (2024)
https://doi.org/10.1007/978-3-031-63937-1_93
Glushych, V., Schopphoven, T.:
Gleichzeitig beschichten und bearbeiten.
Journal für Oberflächentechnik 63, 12-13 (2023)
Maischner, D., Hama-Saleh Abdullah, R., Koa, M., Glushych, V., Weisheit, A.:
Laser cladding of forming tools for bipolar plates for wear protection and repair.
WLT/LiM Lasers in Manufacturing Conference 2023. 26. – 29. Juni 2023, München Germany.
Proceedings of World of Photonics, (5 S.), (2023)
Steiner, M.F., Clemens, M., Olschok, S., Reisgen, U., Kelbassa, J., Schopphoven, T., Haefner, C.L.:
Richtungsunabhängiges Laserstrahl-MSG-Hybridschweißen mit Ringfokus und koaxialer Drahtzuführung für das Verbindungsschweißen und die additive Fertigung.
SCHWEIßEN UND SCHNEIDEN 75, 904-910 (2023)
Kürnsteiner, P., Barriobero-Vilad, P., Bajaj, P., De Geuser, F., Wilms, M.B., Jägle, E.A., Raabe, D.:
Designing an Fe-Ni-Ti maraging steel tailor-made for laser additive manufacturing.
Additive Manufacturing 73, 103647- (2023)
https://doi.org/10.1016/j.addma.2023.103647
Glushych, V., Schopphoven, T.:
Gleichzeitig beschichten und bearbeiten.
Journal für Oberflächentechnik 63, 12-13 (2023)
http://dx.doi.org/10.1007/s35144-023-2558-x
Li, T., Zhang, L., Chen, G., Schopphoven, T., Gasser, A., Poprawe, R.:
Eigenstrain reconstruction of residual stress and its application in extreme high-speed laser material deposition.
Journal of Manufacturing Processes 85, 1054-1065 (2023)
https://doi.org/10.1016/j.jmapro.2022.11.078
Steiner, M.F., Lohrer, P., Schopphoven, T., Haefner, C.L.:
Setup for electrical resistance measurement for laser material deposition with coaxial wire feed and use for process control.
Journal of Laser Applications 35(1), 12002- (2023)
https://doi.org/10.2351/7.0000766
Li, Z., Lin, X., Zhao, X., Ma, X., Hao, Z., Yao, B., Zhong, C., Gasser, A., Tan, H., Sui, S., Chen, J.:
Introducing a Single Crystal Structure in Polycrystalline Inconel 718 Superalloy Via Laser Directed Energy Deposition.
SSRN - (2023)
https://dx.doi.org/10.2139/ssrn.4265492
Singh, A.K., Mundada, Y., Bajaj, P., Wilms, M.B., Patil, J.P., Mishra, S.K., Arora, A.:
Microstructure engineering during directed energy deposition of Al-0.5Sc-0.5Si using heated build platform.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER 202, 123679- (2023)
https://doi.org/10.1016/j.ijheatmasstransfer.2022.123679
Brucki, M., Schmickler, T, Gasser, A., Häfner, C.L.:
Influence of the Relative Position of Powder–Gas Jet and Laser Beam on the Surface Properties of Inconel 625 Coatings Produced by Extreme High-Speed Laser Material Deposition (EHLA).
Coatings 13, 998- (2023)
https://doi.org/10.3390/coatings13060998
Barnowski, D., Dahmen, M., Farkas, T., Petring, D., Petschke, U., Pootz, M., Schäl, R.:
Multifunctional laser processing with a digital twin.
Procedia CIRP 111, 822-826 (2022)
https://doi.org/10.1016/j.procir.2022.08.091
Rittinghaus, S-K., Ali, A., Hecht, U.:
Intrinsic Heat Treatment of an Additively Manufactured Medium Entropy AlCrFe2Ni2-Alloy.
Metals and Materials International 29, 579-590 (2022)
https://doi.org/10.1007/s12540-022-01246-0
Li, T., Zhang, L., Chen, G., Pirch, N., Schopphoven, T., Gasser, A., Poprawe, R.:
A combined heat source model for the prediction of residual stress post extreme high-speed laser material deposition.
Journal of Manufacturing Processes 78, 265-277 (2022)
https://doi.org/10.1016/j.jmapro.2022.03.055
Steiner, M.F., Clemens, M., Olschok, S., Reisgen, U., Kelbassa, J., Schopphoven, T., Haefner, C.L.:
Richtungsunabhängiges Laser-MSG-Hybridschweißen mit Ringfokus und koaxialer Drahtzuführung für das Verbindungsschweißen und die additive Fertigung.
DVS-BERICHTE 382, DVS, Düsseldorf, 730-736 (2022)
Li, T., Zhang, L., Chen, G., Schopphoven, T., Gasser, A., Poprawe, R.:
Process Prediction for Repair of High-Speed Train Wheelseat Axle by Extreme High-Speed Laser Material Deposition (EHLA).
ASME 2021 International Mechanical Engineering Congress and Exposition, Nov 1-5 2021, Online.
Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition (IMECE2021), Volume 2A - (2022)
https://doi.org/10.1115/IMECE2021-72272
Schaible, J., Hausch, D., Schopphoven, T., Häfner, C.:
Deposition strategies for generating cuboid volumes using extreme high-speed directed energy deposition.
Journal of Laser Applications 34(4), 42034- (2022)
http://dx.doi.org/10.2351/7.0000770 (Open Access)
Clemens, M., Warnecke, L., Olschok, S., Reisgen, U., Steiner, M.F.:
Direction-independent laser-GMA hybrid welding with coaxial wire feed and annular beam
Welding in the World 67, 89–97, (2022)
http://dx.doi.org/10.1007/s40194-022-01427-w
Steiner, M.F., Meyer, P., Riessner, L., Clemens, M., Olschok, S., Kelbassa, J., Schopphoven, T., Haefner, C.L.:
Koaxiales Laser Lichtbogen Hybridschweißen als additives Verfahren - COLLAR Hybrid AM.
DVS-BERICHTE, DVS, Düsseldorf, 129-134 (2022)
Fischer, T., Kuhn, B., Fan, X., Wilms, M. B.:
Additive Manufacturing Potentials of High Performance Ferritic (HiperFer) Steels.
Applied Sciences 12, 7234- (2022)
https://doi.org/10.3390/app12147234
Zhong, C., Backes, G., Johann, L.M., Kittel, J., Schopphoven, T., Küppers, W.:
Development of a novel green coating process with laser.
Scientific Reports 12, 6314- (2022)
https://doi.org/10.1038/s41598-022-10351-4
Li Z., Sui S., Ma X., Tan H., Zhong C., Bi G., Clare A., Gasser A., Chen J.:
High deposition rate powder- and wire-based laser directed energy deposition of metallic materials: A review.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE 181, 103942- (2022)
https://doi.org/10.1016/j.ijmachtools.2022.103942
Oeser, S., Preußner, J., Rödler, G., Pirch, N., Weisheit, A.:
Laser Metal Deposition of a Near-Eutectic Al-Ni Alloy.
ADVANCED ENGINEERING MATERIALS 24, 2200696- (2022)
https://doi.org/10.1002/adem.202200696
Kelbassa, J, Biber, A., Steiner M.F.:
Process development and mechanical properties of Ti-6Al-4V samples generated by laser material deposition with coaxial wire feed.
Journal of Laser Applications 34 (2), 022003, (2022)
https://doi.org/10.2351/7.0000491
Zhao, T., Chen, T., Wang, Y., Wang, M., Bakir, M., Dahmen, M., Gasser, A., Häfner, C.L.:
of an AlMgScZr-Alloy in High-Speed Process Regimes.
SSRN: https://ssrn.com/abstract=4059735 or
http://dx.doi.org/10.2139/ssrn.4059735
Steiner, M.F., Speier, M., Kelbassa, J., Schopphoven, T., Häfner, C.L.:
Influence of tool path planning on process stability and deposition accuracy in laser material deposition with coaxial wire feed.
Journal of Laser Applications 34(1), 012026 - (2022)
https://doi.org/10.2351/7.0000483
Singh, A. K., Mundada, Y., Bajaj, P., Wilms, M. B., Jägle, E. A., Raabe, D.:
Investigation of temperature distribution and solidification morphology in multi-layered directed energy deposition of Al-0.5Sc-0.5Si alloy.
Additive Manufacturing 186, 122492- (2022)
https://doi.org/10.1016/j.ijheatmasstransfer.2021.122492
Zhong, C., Liu, J., Backes, G., Zhao, T., Schopphoven, T., Gasser, A.:
3D printing of large-scale components of titanium alloys under open atmosphere.
Materials Today Communications 28, 102688, (2021)
http://dx.doi.org/10.1016/j.mtcomm.2021.102688
Zhao, T., Xu, T., Wang, Y., Bakir, M., Cai, W., Wang, M., Dahmen, M., Zheng, Q., Wei, X., Hong, C., Zhong, C., Albus, P., Schopphovena, T., Gasser, A., Häfner, C.L.:
Some Factors Affecting Porosity in Directed Energy Deposition of AlMgScZr-Alloys.
OPTICS AND LASER TECHNOLOGY 143 - (2021)
https://doi.org/10.1016/j.optlastec.2021.107337
Doñate-Buendia, C., Kürnsteiner, P., Stern, F., Wilms, M. B., Streubel, R., Kusoglu, I. M., Tenkamp, J., Bruder E., Pirch, N., Barcikowski, S., Durst, K., Schleifenbaum, J. H. , Walther, F., Gault, B., Gökce, B.:
Microstructure formation and mechanical properties of ODS steels built by Laser Additive Manufacturing of nanoparticle coated iron-chromium powders.
ACTA MATERIALIA 206; 116566- (2021)
https://doi.org/10.1016/j.actamat.2020.116566
Asabre, A., Wilms, M. B., Kostka, A., Gemagami, P., Weisheit, A., Pfetzing-Micklich, J., Laplanche, G.:
Laser metal deposition on a tool steel of an Al0.6CoCrFeNi compositionally complex alloy with Ti & C additions using elemental powder blends.
SURFACE AND COATINGS TECHNOLOGY 418; 27233- (2021)
https://doi.org/10.1016/j.surfcoat.2021.127233
Zhong, C., Liu, J., Zhao, T., Schopphoven T., Fu, J., Gasser, A., Schleifenbaum J.H.:
Laser Metal Deposition of Ti6Al4V —A Brief Review.
Applied Sciences 10; 764-776 (2020)
https://doi.org/10.3390/app10030764
Zhao, T., Dahmen, M., Cai, W., Alkhayat, M., Schaible, J., Zhong, C., Hong, C., Biermann, T., Zhang, H., Gu D., Weisheit, A., Gasser, A., Schleifenbaum J.H.:
Laser Metal Deposition for Additive Manufacturing of AA5024 and Nanoparticulate TiC Modified AA5024 Alloy Composites Prepared with Balling Milling Process.
OPTICS AND LASER TECHNOLOGY 131; 106438- (2020)
https://doi.org/10.1016/j.optlastec.2020.106438
Schaible, J., Hau, L. A., Weber, D., Schopphoven, T., Häfner, C., Schleifenbaum, J. H.:
Particle Velocity Measurement in Powder Gas Jets of Coaxial Powder Nozzles for Laser Material Deposition.
Journal of Laser Applications; 4- (2020)
http://dx.doi.org/10.2351/7.0000296
Schaible, J., Sayk, L., Schopphoven, T., Schleifenbaum, J. H., Häfner, C.:
Development of a High-speed Laser Material Deposition Process for Additive Manufacturing.
Journal of Laser Applications33(1), 119- (2020)
http://dx.doi.org/10.2351/7.0000320
Schaible, J., Brucki, M., Pirch, N., Schopphoven, T., Hau, L. A., Schleifenbaum, J. H.:
Analysis of the Process Conditions for the Coating of Grey Cast Iron Brake Discs through Laser Material Deposition.
Eurobrake 2020 International braking technology community, Online presentations and downloadable papers. Proceedings of Eurobrake 2020, Paper EB2020-MDS-020 (8 S.), (2020)
https://doi.org/10.46720/eb2020-mds-020
Bobzin, K., Wietheger, W., Knoch, M. A., Sommer, J., Brucki, M., Schopphoven, T., Schleifenbaum, J. H., Häfner, C.:
Kombination einer laserauftraggeschweißten Korrosionsschutzschicht und einer thermisch gespritzten Verschleißschutzschicht
Thermal Spray Bulletin 13(2), 114-121(2020)
Molina, V., Weisheit, A., Gein, S., Hecht, U., Vogiatzief, D.:
Laser Metal Deposition of Ultra-fine Duplex AlCrFe2Ni2-based High Entropy Alloy.
frontiers in Materials 7, 275- (2020)
https://doi.org/10.3389/fmats.2020.00275
Maischner, D., Fritsching, U., Kini, A., Weisheit, A., Uhlenwinkel, V., Johannes Henrich Schleifenbaum, J.H., Biermann, T.:
Laser additive manufacturing of copper - chromium - niobium alloys using gas atomized powder.
International Journal of Materials Research 111; 587-593 (2020)
https://doi.org/10.3139/146.111912
Kürnsteiner, P., Wilms, M. B., Weisheit, A., Gault, B., Jägle, E. A., Raabe, D.:
High-strength Damascus steel by additive manufacturing.
Nature 582; 515-519 (2020)
https://doi.org/10.1038/s41586-020-2409-3
Kittel, J., Gasser, A., Wissenbach, K., Zhong, C., Schleifenbaum, J., Palm, F.;
Case study on AM of an IN718 aircraft component using the LMD process.
Procedia CIRP 94; Elsevier BV; 324-329 (2020)
http://dx.doi.org/10.1016/j.procir.2020.09.061
Kini, A.R., Maischner, D., Weisheit, A., Ponge, D., Gault, B., Jägle, E.A., Raabe, D.:
In-situ synthesis via laser metal deposition of a lean Cu-3.4Cr-0.6Nb(at.%) conductive alloy hardened by Cr nano-scale precipitates and by Laves phase micro-particles.
ACTA MATERIALIA 197; 330-340 (2020)
https://doi.org/10.1016/j.actamat.2020.07.035
Kies, F., Wilms, M.B., Pirch, N., Pradeep, K.G., Schleifenbaum J.H., Haase, C.:
Defect formation and prevention in directed energy deposition of high-manganese steels and the effect on mechanical properties.
MATERIALS SCIENCE AND ENGINEERING A 772 - (2020)
https://doi.org/10.1016/j.msea.2019.138688
Hecht, Ulrike, Requena, Guillermo, Rödler, Georg, Bugelnig, Katrin, Sket, Federico, Milenkovic, Srdjan, Weisheit, Andreas, Gussone, Joachim, Haubrich, Jan, Pusztai, T., Granasy, L., Theofilatos, A., Cesar da Silva, J., Barriobero-VIla, P.:
Ultrafine Fe-Fe2Ti eutectics by laser metal deposition: insights into microstructure formation based on experimental techniques and phase field modelling.
Additive Manufacturing 33; 101133- (2020)
https://doi.org/10.1016/j.addma.2020.101133
Fischer, T., Kuhn, B., Rieck, D., Schulz, A., Trieglaff, R., Wilms, M. B.:
Fatigue cracking of additively manufactured materials – Process and
material perspectives.
Applied Sciences 10; 5556- (2020)
https://doi.org/10.3390/app10165556
Doñate-Buendi, C., Streubel, R., Kürnsteiner, P., Wilms,M. B., Stern, F., Tenkamp, J.,Bruder, E., Barcikowski, S., Gault, B., Durst, K., Schleifenbaum, J. H., Walther, F., Gökce, B. ,
Effect of nanoparticle additivation on properties of oxide dispersion strengthened steels produced by laser powder bed fusion and directed energy deposition.
Procedia CIRP 94; 41-45 (2020)
https://doi.org/10.1016/j.procir.2020.09.009
Ünal-Saewe, T., Vedder, C., Vervoort, S., Schleifenbaum, J.H.:
Digitaler Zwilling im Produktlebenszyklus additiv gefertigter Komponenten
Frenz W. (eds) Handbuch Industrie 4.0: Recht, Technik, Gesellschaft. Springer, Berlin, Heidelberg. (2020)
https://doi.org/10.1007/978-3-662-58474-3_30
Schopphoven, T. , Schleifenbaum, J. H., Tharmakulasingam, S., Schulte, O.:
Setting Sights on a 3D Process: Extreme high-speed laser material deposition, or EHLA, is now being developed into an additive manufacturing process
PhotonicsViews, vol. 16, no. 5, pp. 64–68 (2019)
https://doi.org/10.1002/phvs.201900041
Stryzhyboroda, O., Hecht, U., Witusiewicz, V.T., Laplanche, G., Asabre, A., Wilms, M.B., Weisheit, A.:
Precipitation Hardenable High Entropy Alloy for Tooling Applications.
MRS Advances 4, 1427-1433 (2019)
https://doi.org/10.1557/adv.2019.146
Kürnsteiner, P., Harihana, A., Jung, H.Y., Peter, N., Wilms, M.B., Weisheit, A., Barriobero-Vila, P., Gault, B., Raabe, D., Hägle, E.A.:
Application of Atom Probe Tomography to Complex Microstructures of Laser Additively Manufactured Samples.
Manufacturing Letters 25; 2514-2515 (2019)
https://doi.org/10.1017/S1431927619013308
Kelbassa, J., Biber, A., Wissenbach, K., Gasser, A., Pütsch, O., Loosen, P., Schleifenbaum, J.H.: Influence of focal length on the laser metal deposition process with coaxial wire feeding
SPIE LASE, 2019, San Francisco, California, United States, 02-07 Feb 2019. Proc. SPIE 10911, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII, 09110D (12 S.) (2019)
https://doi.org/10.1117/12.2507799
Kelbassa, J., Gasser, A., Bremer, J., Pütsch, O., Poprawe, R., Schleifenbaum, J.H.:
Equipment and process windows for laser metal deposition with coaxial wire feeding.
Journal of Laser Applications 31, 22320- (2019)
https://doi.org/10.2351/1.5096112
Buchert, T., Ko, N., Graf, R., Vollmer, T., Alkhayat, M. Brandenburg, E., Stark, R. Klocke, F., Leistner, P., Schleifenbaum, J.H.:
Increasing resource efficiency with an engineering decision support system for comparison of product design variants.
Journal of Cleaner Production 210; 1051-1062 (2019)
https://doi.org/10.1016/j.jclepro.2018.11.104
Bold, M.-N., Pirch, N., Ziegler, S., Schleifenbaum J.H.:
Evaluation of Offline Path Planning for Laser Metal Deposition on Freeform Surfaces.
WLT/LiM Lasers in Manufacturing Conference 2019 Munich, June 24 - 27, 2019.
Proceedings of World of Photonics, (7 S.) 1-7 (2019)
Bold, M., Linnenbrink, S., Pirch, N., Gasser, A., Mund, J., Schleifenbaum, J. H.:
Powder Based Laser Material deposition on Edges
The 38th International Congress on Applications of Lasers & Electro-Optics (ICALEO® 2019).
October 7-10, 2019, ORLANDO, FL USA. ICALEO 2019 Proceedings, paper LAM 404, (9 S.), (2019)
Bold, M., Zielinski, J., Ziegler, S., Schleifenbaum, J. H.:
Study of Laser Metal Deposition of IN718 on Inclined Planes: Influence of Inclination on Height and Width of Deposited Material.
MAMC- Metal Additive Manufacturing Conference 2019, Orebro, Sweden.
Proceedings of the Metal Additive Manufacturing Conference, 137-145, (2019)
Poprawe, R., Hinke, C., Meiners, W., Eibl, F., Zarei, O., Voshage, M., Ziegler, S., Schleifenbaum, J. H., Gasser, A., Schopphoven, T., Willenborg, E., Flemmer, J., Weingarten, C., Finger, J., Reininghaus, M.:
Digital photonic production along the lines of industry 4.0
Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII, Proceedings Volume 10519; 1051907 (2018)
https://doi.org/10.1117/12.2292316
Zhao, T., Cai, W., Dahmen, M., Schaible, J., Hong, C., Gasser, A., Weisheit, A., Biermann, T., Kelbassa, I., Zhang, H., Gu, D., Schleifenbaum, J.H.:
Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures.
Vacuum 158; 121-125 (2018)
https://doi.org/10.1016/j.vacuum.2018.09.052
Ünsal, I., Hama-Saleh, R., Sviridov, A., Bambach, M., Weisheit, A., Schleifenbaum, J.H.,
Mechanical Properties of Sheet Metal Components with Local Reinforcement Produced by Additive Manufacturing.
21st International ESAFORM Conference on Material Forming, ESAFORM 2018, 23 -25 April 2018 Palermo, Italy.
AIP Conference Proceedings 1960(1), 160028- (6 S.) (2018)
https://doi.org/10.1063/1.5035054
Kelbassa, J., Gasser, A., Bremer, J., Pütsch, O., Poprawe, R., Schleifenbaum, J.H.:
Influence of focal length on the laser metal Deposition with Coaxial Wire Feeding.
37th International Congress on Applications of Lasers & Electro-Optics (ICALEO 2018), 14-18 Okt. 2018, Orlando/FL USA. ICALEO 2018 Proceedings, Paper #802. X S. (2018)
https://doi.org/10.1117/12.2507799
Pirch, N., Niessen, M., Linnenbrink, S., Schopphoven, T., Gasser, A., Poprawe, R., Schöler, C., Arntz, D., Schulz, W.:
Temperature field and residual stress distribution for laser metal deposition
JLA 30 (3), 32503- (5 S.) (2018)
https://doi.org/10.2351/1.5040634
Zhong, C., Pirch, N., Gasser, A., Poprawe, R., Schleifenbaum, J.H.:
The Influence of the Powder Stream on High-Deposition-Rate Laser Metal Deposition with Inconel 718.
Metals; 443- (2017)
https://doi.org/10.3390/met7100443
Wilms, M.B., Biermann, T., Rolink, G., Weisheit, A., Poprawe, R.:
Growing of bulk sapphire single crystals using laser material deposition.
Journal of Laser Applications 29; 1-7 (2017)
http://dx.doi.org/10.2351/1.4983638
Bambach, M., Sviridov, A., Weisheit, A., Schleifenbaum, J.H.:
Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing.
Metals 7, 1-14 (2017)
https://doi.org/10.3390/met7040113
Lotfian, S., Rolink, G., Weisheit, A., Palm, M.:
Chemically graded Fe–Al/steel samples fabricated by laser metal deposition.
MRS Advances 2; 1393-1398 (2017)
https://doi.org/10.1557/adv.2017.124
Kürnsteiner, P., Wilms, M.B., Weisheit, A., Barriobero-Vila, P., Jägle, E., Raabe, D:
Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition.
ACTA MATERIALIA 129; 52-60 (2017)
https://doi.org/10.1016/j.actamat.2017.02.069
Bambach, M., Sviridov, A., Weisheit, A., Schleifenbaum, J.H.:
Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing.
Metals 7; 1-14 (2017)
https://doi.org/10.3390/met7040113
Alkhayat, M., Gasser, A., Arntz, K., Klingbeil, N., Vollmer, T.:
Additive Fertigung "Vom Pulver zum Fertigteil".
Ressourceneffizienz. Neugebauer, Reimund (Hrsg.) Berlin, Heidelberg: Springer Vieweg; 151-152 (2017)
http://dx.doi.org/10.1007/978-3-662-52889-1_9
Klocke, F., Vollmer, T., Klingbeil, N., Wegener, M., Alkhayat, M., Lahl, M., Kluth, A.:
E3-Produktion: Ultrakurze Prozessketten bewerten und verbessern.
ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 2016; 527-530 (2016)
https://doi.org/10.3139/104.111583
Fraunhofer-Institut für Lasertechnik ILT
