Fraunhofer-Institut für Lasertechnik ILTEssentieller Bestandteil der wissenschaftlichen Arbeit am Fraunhofer ILT sind die Vorträge unserer Wissenschaftler auf nationalen und internationalen Fachtagungen, Messen und Konferenzen.Auf dieser Seite finden Sie eine Auflistung der Vorträge ab dem Jahr 2015.
Vorträge auf Messen, Konferenzen und Fachtagungen
Reiternavigation
2025
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2025
Februar
18.02.2025 – Martin Traub „Laserbasierte Trägheitsfusion – Chancen und Herausforderungen für die optischen Technologien“, 507. Jenaer Optikkolloquium, online.
März
18.03.2025 –Stephan Wissenberg: „Development of a non-collinear enhancement resonator for a VUV frequency comb nuclear clock laser“, DPG Frühjahrstagung SAMOP, Hannover, Germany.
2024
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2024
Januar
16.01.2024 – Constantin Häfner: „Fusion Energy Discussion“, acatech am Dienstag, Online.
18.01.2024 – Tim Lantzsch: „Hybrid additive manufacturing with preforms for repair application“, Clean Aviation Workshop: Additive manufacturing in aviation, Aachen, Deutschland
30.01.2024 – Martin Adams: “Optical setup for a two-dimensional tweezer array with independently adjustable columns for neutral atom quantum computing”, Quantum West, San Francisco, CA, USA
März
04.03.2024 – Constantin Häfner: „Inertial Fusion - from ignition to a future energy source“, Max Planck School of Photonics, Aachen, Germany.
05.03.2024 – Constantin Häfner: „Fusion - vom Experiment zum Kraftwerk“, Rotary, Aachen, Germany.
12.03.2024 – Constantin Häfner: „Looking ahead: Research and Development for IFE in Germany“; Workshop Fusion UK-D Wissenschaftsaustausch, London, UK.
13.03.2024 – Jochen Vieker: „Laser-driven x-ray generation for industrial applications – A literature-and model-based approach to evaluate brilliance, flux and radiation safety“, Optica High-brightness Congress 2024, Wien, Deutschland
April
04.04.2024 – Constantin Häfner: „Challenges towards Inertial Fusion Energy, A summary of findings and thoughts from the U.S. DOE BRN and the German IFE Expert commission“, US DOE FESAC FCOP webinar, online.
11.04.2024 – Martin Adams: “Multiphysics modeling of high power laser diodes”, LLNL APT Seminar, Livermore, CA, USA
18.04.2024 – Constantin Häfner: „Recent Advances @ Fraunhofer ILT“, AKL 24, Aachen, Germany.
19.04.2024 – Frederike Brackmann: „Laser-based bonding of conducting metal paths on thermoplastic textiles for smart textiles applications“, AKL 24, Aachen, Germany.
19.04.2024 – Constantin Häfner: „Laser inertial confinement fusion as an opportunity for industry“, AKL 24, Aachen, Germany.
24.04.2024 – Manuel Jung: “Impact of preheating conditions on form deviation during laser polishing of N-BK7 glass”, 11th european seminar on precision optics manufacturing, Teisnach, Deutschland.
26.04.2024 – Luke Schüller: „Influence of Defocused Laser Beam And Ring-Mode Laser on the LPBF-Process of A Scancromal® Concept Alloy”, Additive Manufacturing Conference (AMC) 2024, Antalya, Turkiye
Mai
15.05.2024 – Thomas Kaster: „Position Control of Mobile Robots for Laser Material Processing“, International Conference on Control, Automation and Diagnosis (ICCAD), Paris, Frankreich.
16.05.2024 – Luke Schüller: „KI-basierte Defektdetektion für das LPBF“, Rapid.Tech 3D 2024, Erfurt, Deutschland.
22.05.2024 – Thomas Kaster: „ Digital Photonics for next generation laser material processing“, 125. Jahrestagung der DGaO in Aachen, Aachen.
23.05.2024 – Lukas Warnecke: „Teilautomatisiertes Optikdesign und Datenkette für eine laserbasierte Optikfertigung“, Deutschland. 125. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, Aachen, Germany.
24.05.2024 – Thomas Westphalen: „Optik-Design für eine skalierbare Anordnung Optischer Pinzetten für das Quantum-Computing“, 125. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, Aachen, Germany.
24.05.2024 – Constantin Häfner: „Laserfusion - vom Experiment zum Kraftwerk“, 125. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, Aachen, Germany.
25.05.2024 – Florian Rackerseder: „Strahlformung für die Laser-Diode-Floating-Zone-Kristallzucht“, Jahrestagung der DGaO 2024, Aachen, Deutschland.
25.05.2024 – Constantin Häfner: „Innovation entfesseln: Wie die Lasertechnik im Maschinenbau das Sonnenfeuer für eine saubere und unerschöpfliche Energiequelle auf die Erde holt“, RWTH Tag des Maschinenbaus, Aachen, Germany.
Juni
04.06.2024 – Michael Strotkamp: „A novel approach for a spaceborne solar‐blind Doppler lidar for superior wind measurements in the tropo‐, strato‐ and mesosphere”, ESA spaceborne lidar workshop, Noordwijk, Niederlande.
06.06.2024 – Andreas Vogelpoth: „Development of Heat Treatment Processes for Additively Manufactured Aluminum Alloys in Hydrogen-Powered Aircraft“, European Conference on Heat Treatment and Surface Engineering, Toulouse, Frankreich.
10.06.2024 – Constantin Häfner: „The Fusion Frontier: Igniting Tomorrow's Power, today“, Industrietag Kernfusion, München, Germany.
11.06.2024– Khuldoon Usman: „A novel modelling approach for simulating meltpool movement in laser based additive manufacturing processes“, 25th International Symposium on Laser Precision Microfabrication, San Sebastian, Spain.
25.06.2024 –Michael Strotkamp: „Novel emitter for a compact general-purpose Doppler lidar based on diode-pumped Alexandrite”, 31st International Laser Radar Conference (ILRC), Landshut, Deutschland.
27.06.2024 – Jana Ammersbach: „MERLIN laser transmitter for space borne methane sensing“, 22nd Coherent Laser Radar Conference (CLRC) and 31st International Laser Radar Conference, Landshut, Deutschland.
Juli
03.07.2024 – Constantin Häfner: „Laser Inertial Fusion - an Overview“, EC Fusion Business Forum, Berlin, Germany.
18.07.2024 – Constantin Häfner: „Fusion - eine mögliche Energiequelle der Zukunft”, Innovationslounge: Wege zur Klimaneutralität – Technologische Koexistenz, München, Germany.
August
28.08.2024 – Sarah Scheuer: „Diode-pumped, Q-switched Alexandrite laser as emitter for general purpose atmospheric Lidar systems“, 11th EPS-QEOD EUROPHOTON Conference, Vilinius, Litauen.
September
05.09.2024 – Constantin Häfner: „Innovation entfesseln: Kernfusion als Treiber für die nächste Generation photonischer Technologien in Deutschland“, Coating Excellence fo(ur) decades (40 Jahre Laseroptik, Festvortrag), Garbsen, Germany.
11.09.2024 – Christoph Wortmann: „Prospects and technical possibilities for the laser-based production of thermoplastic hydrogen components“, LKH2, Aachen, Germany.
13.09.2024 – Michael Strotkamp: „Ground-based lidar networks: Current state and outlook“, 16th International Workshop on Technical and Scientific Aspects of iMST Radar and Lidar (MST16/iMST3), Rostock, Germany.
18.09.2024 – Christian Weiß: „Implications of topology optimization on the ecological efficiency of the LPBF process“, LANE 2024, Fürth, Germany.
26.09.2024 –Thomas Laag: „Approaches for microstructure manipulation in Laser Powder Bed Fusion of metallic alloys by discrete energy deposition via pulsed wave (pw) exposure“, Materials Science and Engineering MSE2024, Darmstadt, Germany.
28.09.2024 – Constantin Häfner: „Energie aus Fusion - wie Laser das Sonnenfeuer auf die Erde holen“, DPG Highlights der Physik, Hannover Aachen.
Oktober
22.10.2024 –Michael Strotkamp: „Efficient, tunable UV laser based on Alexandrite for future spaceborne wind lidar“, 15th International Conference on Space Optics, Antibes Juan-les-Pins, France.
November
04.11.2024 – Friederike Brackmann: „Laser Bonding of Conductive Tracks on Textiles with Adapted Wavelengths for Smart Textile Applications“, ICALEO 2024, Los Angeles, CA, USA.
04.11.2024 – Jan Brüggenjürgen: „Analyzing multi-spectral emission and synchrotron data to evaluate the quality of laser welds on copper“, ICALEO 2024, Los Angeles, CA, USA.
04.11.2024 – Alexander Olowinsky: „Innovative Laser Processes and Material Advancements in Battery Module Packaging“, ICALEO 2024, Los Angeles, CA, USA.
05.11.2024 – Christoph Wortmann: „Evaluation of measures to reduce thermal distortion caused by laser-based structuring of thin metal sheets with continuous wave fiber laser“, ICALEO 2024, Los Angeles, CA, USA.
08.11.2024 – Constantin Häfner: „ Wie die Lasertechnik das Sonnenfeuer für eine saubere und unerschöpfliche Energiequelle auf die Erde holt“, RWTH Wissenschaftsnacht, Aachen Germany.
12.11.2024 – Constantin Häfner: „ Laser Inertial Fusion Energy: Unlocking Opportunities, Overcoming Challenges, and Its Transformative potential for the Photonics Industry“, IEEE- IPC 2024, Rom, Italy.
22.11.2024 – Friederike Brackmann: „Bonding of Metallic Structures to Thermoplastic Textiles using Laser Radiation for Smart Textile Applications“, Aachen-Dresden-Denkendorf International Textile Conference 2024 (ADD ITC 24), Stuttgart, Germany.
Dezember
2023
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2023
Januar
19.01.2023 – Constantin L. Haefner: “Fusionsforschung: Chance für Deutschland und Bedeutung für Fraunhofer”, Fraunhofer Fokustag Kernfusion, Aachen, Germany.
23.01.2023 Martin Adams: ”Optical Setup for a 2D Tweezer Array”, QRydDemo Workshop, Stuttgart, Deutschland.
24.01.2023 Samuel Moritz Fink: „Fast drying in battery cell production with laser radiation: Challenges and Opportunities”, LSE23, Aachen, Deutschland.
29.01.2023 Martin Traub: “Highly reliable diode laser pump sources for the space qualified MERLIN laser platform and future wind LiDAR missions (invited)”, Photonics West 2023, San Francisco, USA.
29.01.2023 Martin Adams: “Evaluation of design concepts for feedback-resistant 9xx-nm high-power laser diodes”, Photonics West 2023, San Francisco, USA.
28.01.2023 Christina Giesen: “Efficient and tissue-saving bone ablation with a pulsed 3 µm laser source”, SPIE BiOS, 2023, San Francisco, California, United States.
31.01.2023 Patrick Baer:” Thulium- and homium-doped high stability fiber amplifiers at 2 μm for next generation gravitational wave detectors”, Photonics West 2023, San Francisco, USA.
Februar
01.02.2023 Florian Rackerseder: “Beam shaping system for laser-induced crystal growth”, Photonics West 2023, San Francisco, USA.
01.02.2023 Sarah Klein: “Industry and academia: Pursuing a PhD at Fraunhofer the best of both worlds”, Photonics West 2023, San Francisco, USA.
08.02.2023 Alexander Olowinsky: “Laser based processes for applications in battery manufacturing and electric vehicles“, Nagoya Laser Forum, Nagoya, Japan.
März
22.03.2023 – Constantin L.Haefner: „Fusionsforschung: Chance für Deutschland“, Fraunhofer Netzwertsymposium, München, Germany.
30.03.2023 – Tim Lantzsch: „Potentials of Additive Manufacturing in Nuclear Fusion Energy“, Additive Alliance Meeting, Hamburg, Deutschland
April
25.04.2023 Judith Kumstel: „Verbesserung von Kantenrissempfindlichkeit und zyklischer Belastbarkeit durch Laserkantenveredlung“, Deutscher Schneidkongress 2023, Essen, Deutschland.
Mai
03.05.2023 – Christian Weiß: “Ecological Impact Assessment of Processing Sustainable IN718 Powder Material in Laser Powder Bed Fusion (LPBF)”, 2023 RAPID + TCT Conference, Chicago, USA
09.05.2023 Alexander Olowinsky: “Laser based processes in battery manufacturing – from cell to system “, LEF Technology Brick, online.
15.05.2023 – Constantin L. Haefner: “Energiegewinnung durch Fusion – Chance für Deutschland, Mittagsbriefing Bundestag, Berlin, Germany.
16.05.2023 Marcelo de Oliveira Lopes: „Analysis of Response Signals to Minimally Invasive Laser Modulation in Laser Cutting“, Emporia23, Aachen, Deutschland.
23.05.2023 – Constantin L.Haefner: „Digital Photonics: enabler to Address Economic and Social Challenges“, 10th NRW Nano Conference Dortmund, Dortmund, Germany.
Juni
05.06.2023 – Constantin L.Haefner: „Memorandum Laser Inertial Fusion Energy“, "BMBF-BDI Symposium Neue Dynamik in der Fusionsforschung - Chancen und Perspektiven für den Industriestandort Deutschland“, Berlin, Germany.
07.06.2023 Jochen Vieker: „Irradiation system for testing of EUVL components“, EUVL Supplier Showcase, imec Leuven, Belgium.
23.06.2023 – Michael Strotkamp: „Novel Lidar system for Atmospheric Measurements based on Alexandrite laser“, ESA spaceborne lidar workshop, Milos, Griechenland.
25.06.2023 – Constantin L. Haefner: „Laser-driven inertial confinement fusion, power source of the future“, LASER, München, Germany.
28.06.2023 – Michael Strotkamp: „Diode-pumped Q-switched Alexandrite Laser as an emitter in a compact general purpose lidar system for atmospheric measurements“, CLEO/Europe, Deutschland.
29.06.2023 – Tim Lantzsch: "Application Panel: Additive Manufacturing News from the 3D printing of metallic components, LASER World of Photonics 2023, München, Deutschland.
29.06.2023 – Florian Rackerseder: „High-power diode laser system for laser-induced crystal growth“, Laser World of Photonics 2023, München, Deutschland.
Juli
18.07.2023 –Frederike Brackmann: „Feasibility analysis for the application of conductive tracks on textiles by means of laser radiation“, IIW2023, Singapur.
18.07.2023 – Christoph Wortmann: „Development of a laser-based metal-polymer joint with prescribed opening forces“, IIW 2023, Singapur.
September
11.09.2023 – Constatin L.Haefner: „Zündung thermonuklearer Fusionsplasmen mittels Hochleistungslaser: Meilenstein auf dem Weg zu einer nachhaltigen, sauberen Energiegewinnung“, Zeiss Kolloquium, Online.
11.09.2023 – Johannes Weitenberg: „Laserfusions-Forschung – Chancen für die deutsche Photonik-Industrie“, Spectaris Branchentag und Zukunftsfest, Berlin, Deutschland
13.09.2023 – Christian Weiß:“ Vibrationsangeregtes Pulverauftragswerkzeug zur Effizienzsteigerung des Laser Powder Bed Fusion – Prozesses“, DVS Congress 2023, Essen, Deutschland
19.09.2023 – Johannes Weitenberg:“ Robust high average power lasers and scaling to high pulse energy“, European Advanced Accelerator Concepts workshop (EAAC), Elba, Italien
20.09.2023 – Samuel Moritz Fink: „Laser applications for thin film processing in fuel cells“, LKH2 2023, Aachen, Deutschland
27.09.2023 – Manuel Jung: „CAM-NC-Datenkette für das Laserpolieren komplexer Optiken“, 13. Wetzlarer Herbsttagung, Wetzlaer, Deutschland
29.09.2023 – Adam El-Sarout: „Dual-beam Laser-based Processing of Tribological Polymer Coatings“, 9th international Tribology Conference [ITC2023], Fukuoka, Japan.
Oktober
18.10.2023 – Tim Lantzsch: „A combined approach of process and systems engineering for increased productivity in Laser Powder Bed Fusion“, MAMC Conference 2023, Wien, Österreich.
20.10.2023 – Christoph Wortmann: „Mechanical investigation of recyclability for sustainable use of laser-based metal-polymer joints“, AJP 2023, Braga, Portugal.
23.10.2023 – Manuel Jung: „Laser-Based Manufacturing of Glass Optics“, 2023 Source Workshop, Aachen, Deutschland.
23.10.2023 – Tim Lantzsch: „Laser-based additive manufacturing of components for extreme environments“, EUV Source Workshop 2023, Aachen, Deutschland
24.10.2023 – Jochen Vieker:“ Systems for development and accelerated testing of EUVL components“, 2023 Source Workshop, Aachen, Deutschland
25.10.2023 – Stephan Wissenberg:“A vacuum ultraviolet frequency comb for the
excitation of the Thorium-229 isomer“, 2023 Source Workshop, Aachen, Deutschland
25.10.2023 – Marius Dahmen: „Laser-based Production of Non-stick Coatings on CFRP Rolls“, Smart Materials and Surfaces Conference [SMS2023], Albufeira, Portugal
November
08.11.2023 – Karsten Braun:“ Prozessketten zur Fertigung von Medizin-, Feinmechanik-, Individualbauteilen und Prototypen aus Kunststoff - PolyPro3D“, F.O.M.-Konferenz 2023, Online
08.11.2023 – Emrah Uluz: „Entwicklung eines laserbasierten Korrekturpoliturverfahrens für Asphären und Freiformoptiken aus Quarzglas und ULE“, Abgeschlossenes IGF-Projekt, Online
08.11.2023 – Michael Strotkamp: „A novel approach for a spaceborne solar‐blind Doppler lidar for superior wind measurements in the tropo‐, strato‐ and mesosphere“, Workshop on Innovative Technology for Space Optics - WITSO24, Noordwijk, Niederlande
14.11.2023 – Jochen Vieker: „Irradiation systems for accelerated testing of EUVL components“ PTB Symposium VUV and EUV Metrology, Berlin, Deutschland
15.11.2023 – Georg Meineke:“ Screening and Sorting with Laser-made Microfluidics“, IVAM HighTech Forum 2023, Düsseldorf, Deutschland.
28.11.2023 – Constantin L. Haefner: „The German Roadmap on IFE state of the art and prospective“, ELI Laser-Induced Fusion Kick-off Meeting, Prag, Czech Republic.
Dezember
01.12.2023 – Constantin L. Haefner: „Laser-driven Inertial Confinement Fusion – Technology and Potential“, Laser Symposium, Dresden, Germany.
19.12.2023 – Constantin L. Haefner: „The German Roadmap on Fusion Energy“, FPA Meeting, Washington, US.
2022
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2022
Januar
13.01.2022 - Christian Heinigk: "A Multi-Scale Model for Ultra Short Pulsed Parallel Laser Structuring --- Part II. the macro-scale model", SPIE Photonics West 2022, San Francisco, USA
27.01.2022 - Dennis Haasler: "Deep Drilling in Metals by Means of Ultrashort Laser Pulses", SPIE Photonics West 2022, San Francisco, USA
Februar
17.02.2022 - Tim Latzsch: "Gantry-based LPBF machines – Towards manufacturing of large-scale turbomachinery components", ICTM Conference 2022, Aachen, Online
21.02.2022 - Linda Charlotte Hoff: "Laser sintering of ceramic-based solid-state battery materials", Photonics West, Online
21.02.2022 - Martin Adams: "Multiphysics modeling of feedback-induced catastrophic optical damage in 9xx-nm high-power laser diodes", Photonics West, Online
21.02.2022- Jan Fabian Geus: "Frequency down-conversion for efficient, low-noise quantum frequency converters", Photonics West 2022, San Francisco, USA
April
07.04.2022 – Christian Weiß: Sustainability Technology Assessment in AMl, ACAM Webinar, Aachen, Deutschland
13.04.2022 – Manuel Jung: “Laser polishing processes for the generation of smooth, defect-free optical surfaces”, OCLA 2022 Symposium, Buchs, Switzerland.
13.04.2022 – Karsten Braun: “Laser polishing for post processing of 3D-printed polymer parts”, 6th International Webinar on “3D Printing & Additive Manufacturing”, Online.
23.04.2022 – Thomas Laag: “Additive manufacturing of parts with high layer thickness and high geometric accuracy by pulsed wave Laser Powder Bed Fusion”, ICDM Conference 2022, Online.
26.04.2022 – Andreas Vogelpoth: “Additive manufacturing of tool steels”, Tooling Conference 2022, Örebro.
26.04.2022 – Klaus Kreuels: “Laser-based Production of Functional Scaffolds for Regenerative Medicine”, World of Photonics, München.
27.04.2022 – Florian Rackerseder: “Laser-assisted growth of single crystals for optical isolators”, BMBF Networking Event Quantum Computing 2022, München.
28.04.2022 – Marius Dahmen: “Laser-based processing of polymeric tribological coatings for lightweight applications”, Tribology International Conference 2022, Barcelona/Online.
Mai
05.05.2022 – Min-Uh Ko: “EHLA3D – Development of the Extreme High-speed Laser Material Deposition for Additive Manufacturing”, AKL’22, Aachen.
06.05.2022 – Max Fabian Steiner: “Coaxial Laser Arc Hybrid Additive Manufacturing with Wire”, AKL’22, Aachen.
06.05.2022 – Christian Vedder: “Smart Products through Functional Layers”, AKL’22, Aachen, Deutschland.
06.05.2022 - Marcelo de Oliveira Lopes: „Use of acoustic resonances in laser beam cutting – the cutting whistle“, AKL 22, Aachen, Deutschland.
12.05.2022 – Andreas Weisheit: “Additive Manufacturing via Laser Direct Energy Deposition of Nano-Scale Duplex High Entropy Alloys based on AlCrFe2Ni2”, Symposium „High Entropy Alloys: Potential for industrial applications“, Dresden, Deutschland.
15.05.2022 – Martin Adams: “Analysis of the Non-Injecting Mirror Concept for Feedback-Resistant High-Power Laser Diodes with a Multiphysics Model”, CLEO 2022, San José, USA.
17.05.2022 – Christian Vedder: “Laser-based Manufacturing of Electronic Layers”, IEC-TC91-Meeting, Japan/Online.
Juni
08.06.2022 – Jana Köller: “Particle re-deposition during ultrashort pulse laser ablation of ITO thin films using single- and multi-beam processing”, LPM 2022, Dresden, Deutschland.
08.06.2022 - Jochen Vieker: “SYSTEMS FOR THE DEVELOPMENT OF EUVL COMPONENTS”, 2022 EUVL Workshop and Supplier Showcase, Online.
21.06.2022 - Vogelpoth, Andreas: „Improved live cycle of automotive components by new steel grades and additive manufacturing“, 6th International Conference on Steels in Cars and Trucks, Milan, Italy.
24.06.2022 – Jonas Mertin: “Laser processing of printed electronic layers”, Innovations Festival: Printed, Hybrid, 3D, InMold, Textile Electronics, Online.
Juli
04.07.2022 – Julian Alexander Hanss: “Real-Time Particle Position Detection for Dynamic Optical Tweezers”, International Symposium on Microscale Separations and Bioanalysis, Lüttich, Belgien.
07.07.2022 – Fabian Wendt: “Laser-Sensorik zur Vermessung der Mikrotextur von Fahrbahnen und Fahrbahnmarkierungen im Fließverkehr“, Sondersitzung FGSV "Berührungslose Griffigkeitsmessung", Celle, Deutschland.
12.07.2022 – Marius Dahmen: „Laser-based processing of polymeric protection coatings for lightweight applications”, European Technical Coating Congress ETCC, Krakau, Polen.
25.07.2022 – Tim Lantzsch: “Potential of Dual Laser Array Powder Bed Fusion for the Processing of Nickel-base Alloy 625”, Solid Freeform Fabrication Symposium 2022, Austin, Texas, USA.
25.07.2022 – Christian Weiß: “Evaluation of the Ecological Footprint for Parts from AlSi10Mg manufactured by Laser Powder Bed Fusion”, Solid Freeform Fabrication Symposium 2022, Austin, Texas, USA.
August
29.08.2022 – Andreas Weisheit: “Extreme High Speed Laser Material Deposition for Cladding and Additive Manufacturing” Int. Conf. Laser Material Processing, LAMP22, Indien/Online.
September
05.09.2022 – Michael Strotkamp: “Versatile laser transmitter for an airborne CO2 and water vapor lidar based on a parametric laser setup”, SPIE Remote Sensing, Berlin. Deutschland.
06.09.2022 – Christian Weiß: “Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)”, LANE 2022, Fürth, Deutschland
07.09.2022 – Marius Dahmen: “Dual-beam Laser-based Processing of Tribological Polymer Coatings”, 12th CIRP Conference on Photonic Technologies [LANE 2022], Fürth, Deutschland.
13.09.2022 – Elie Haddad: „Understanding the Challenges Faced when Joining Metal Bipolar Plates“, LKH2 2022, Aachen, Deutschland.
15.09.2022 – Florian Rackerseder: “20 kW optical system for growing Ga2O3 single crystals by the LDFZ method”, Workshop on Oxides, Dielectrics and Laser Crystals, Lyon, Frankreich.
20.09.2022 – Wolfgang Fiedler: “Fugenfolgeregelung für das Fügen mit Laserstrahlung mittels koaxialer texturbasierter Bildverarbeitung“, DVS Congress 2022 – Innovationsforum, Koblenz, Deutschland.
20.09.2022 – Florian Fuchs: „CMOS compatible laser-crystallization of amorphous silicon films for monolithic MEMS integration”, MNE-ES 22, Leuven, Niederlande.
21.09.2022 – Max Fabian Steiner: “Richtungsunabhängiges Hybridschweißen mit Ringfokus und koaxialer Drahtzuführung, DVS Congress 2022, Koblenz, Deutschland.
27.09.2022 – Tim Gerrit Lücke: „Influence of laser power and scan speed on the formation of hot cracks during the processing of high-speed steel HS2-2-2 by laser powder bed fusion”, MAMC 2022, Graz, Österreich.
29.09.2022 – Klaus Kreuels:” Quantifying the Adhesion of Hydrogels to Polymers for the Fabrication of Hybrid Biomaterial Constructs”, BMT 2022, Innsbruck, Österreich.
29.09.2022 – Jonas Frühling: “Laser Production Processes in Fuel Cell Manufacturing”, Laser Production Processes in Fuel Cell Manufacturing, Bremen, Deutschland.
Oktober
03.10.2022 Dominik Esser: “Optomechanical design of a 150 mJ single frequency UV laser for the AEOLUS-2 mission”, ICSO 2022, Dubrovnik, Kroatien.
05.10.2022 – Alexander Olowinsky: “ Laserstrahlschweißen – Aktuelle Entwicklungen aus der Forschung“, 18. Technologieseminar bei Wolf Produktionssysteme, Freudenstadt, Deutschland.
06.10.2022 – Alexander Olowinsky: „Laser beam welding - new opportunities with laser sources from NIR to VIS”, International Welding & Joining Conference-Korea 2022, Jeju, Korea.
12.10.2022 – Laura Kreinest:” Reducing Waviness of Laser Polished AM Parts via De-Structuring by Laser Remelting”, LaP2022, Aachen, Deutschland.
13.10.2022 – Karsten Braun: “Processing Strategies for Laser Polishing of Polymer Parts”, LaP2022, Aachen, Deutschland.
25.10.2022 – Dirk Petring: “Seeing Is Believing – Some New Insight into Laser Beam Welding and Cutting Processe”, Visual-JW 2022, The 6th International Symposium on Visualization in Joining and Welding Science through Advanced Measurements and Simulation, Osaka, Japan (online).
26.10.2022 – Samuel Moritz Fink: “Additive method for the laser based manufacturing of all ceramic piezoelectric thin film microelectromechanical systems”, 3d-ICOMAS, Verona, Italien.
27.10.2022 – Jochen Vieker: “X-ray generation with industry-class lasers – a model to estimate emission properties", 2022 Source Workshop, Online.
November
02.11.2022 – Christian Weiß: „Life Cycle Assessment for Laser Powder Bed Fusion“, International Conference on Additive Manufacturing ICAM, Orlando, USA
10.11.2022 – Michael Strotkamp: “Rugged, versatile diode-pumped Alexandrite lasers for doppler resonance lidars”, Kolloquium Leibniz IAP, Kühlungsborn und virtuell.
14.11.2022 – Karsten Braun: „Laser polishing for post processing of 3D-printed polymer parts”, 3D-Printing Forum 2022 , Valencia, Spanien.
17.11.2022 – Georg Meineke: “µTAS for Automatic Readout of Diagnostic Microbeads in Multiplex Diagnostics”, COMPAMED HIGH-TECH FORUM, Düsseldorf, Deutschland.
Dezember
06.12.2022 – Sören Hollatz: „Laser Welding for Energy Storage Systems“, Mahle Technologietag, Stuttgart, Deutschland.
06.12.2022 – Fabian Wendt: „OCT for Omnidirectional Online Monitoring of Powder Based Laser Metal Deposition Process”, MAHLE Lasertechnologietag, Stuttgart, Deutschland.
12.12.2022 – Patrick Baer: “High stability fiber amplifiers for terrestrial and space sensing applications at 1 and 2 µm”, Optica Laser Congress and Exhibition, Bacelona, Spanien.
12.12.2022 – Patrick Baer: “High Stability Fiber Lasers at 1 and 2 µm for Gravitational Wave Detectors, Sensing- and Quantum Applications”, Optica Laser Congress Networking Event, Bacelona, Spanien.
12.012.2022 – Manuel Jung: “Reduction of process-induced Waviness in Laser Polishing of Fused Silica by a Thermography-based Process Control”, Optica Laser Congress Networking Event, Bacelona, Spanien.
2021
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2021
Januar
08.01.2021 - Edgar Willenborg: "Laser Polishing of Metals", 2021 Laser Korea Winter Workshop, South Korea
Februar
05.02.2021 - Michael Strotkamp: "Neuartige Lidarsysteme für Atmosphären- und Klimamessungen", DLR-Raumfahrtmanagement Kolloquium, Online
05.02.2021 - Christina Giesen: "Laser ablation of bone tissue with Q-switched infrared laser sources for neurosurgical applications", Konferenzbeitrag, San Francisco (Online)
24.02.2021 - Hans Huber: "Poster: Efficient frequency conversion for the connection of solid state qubits to fiber networks", ML4Q Annual Conference, online
27.02.2021 - Christian Vedder: "Laser Treatment of Thin Films", 6. CAMPFIRE Workshop, Greifswald
März
04.03.2021 - Juri Munk: Predicting Local Material Properties of LPBF-manufactured Complex Geometries with a Correlation Model of Thermal History Simulation and Mechanical Testing Data for Ti-6Al-4V. ASME AM Industry Summit, Virtuell
06.03.2021 - Florian Herbst: "Towards Imaging with Undetected Photons with a nonlinear Mach-Zehnder-type interferometer in MIR", SPIE Photonics West (2021), San Francisco
08.03.2021 - Martin Adams: "Modeling of the impact of current crowding on catastrophic optical damage in 9xx-nm high power laser diodes", Photonics West, Online
09.03.2021 - Ludwig Pongratz: "Automated spatial period variation for Direct Laser Interference Patterning DLIP", SPIE Photonics West - Online, San Francisco - Online
12.03.2021 - Chao He: "Helical Drilling Optic: From Lab to Applications for Energy-efficient Industry", DCHAN-Engineering 4th Web-Seminar "Production Technologies for Future Energy Industry”, virtuell
16.03.2021 - Martin Traub: "Design optischer Systeme für die Lasermaterialbearbeitung", Treffen der Optence-Arbeitsgruppe "Optikdesign", online
19.03.2021 - Wolfgang Schulz: "Data driven model reduction for Inverse Solution 'InSol'", workshop Industry network "HYBRID-3D", online
19.03.2021 - Felix Fischer: "Optical process monitoring in Laser Powder Bed Fusion", Workshop Industry network "HYBRID-3D", Online
19.03.2021 - Wolfgang Schulz: "Simulation activities of the Fraunhofer ILT for laser-based additive manufacturing", workshop Industry network "HYBRID-3D", online
24.03.2021 - Dirk Petring: "Milestones of laser beam cutting, and a look ahead", 7th Industrial Laser Applications Symposium ILAS 2021, Plenary, online
31.03.2021 - Michael Strotkamp: "Ground-based general purpose Doppler-lidar: A technology for Doppler-aerosol measurements and beyond", International Conference on Space Optics, Online
31.03.2021 - Dennis Haasler: "Development of an on-the-fly percussion drilling process based on pulse bursts", SPIE Photonics West Konferenzvortrag, Online
31.03.2021 - Michael Strotkamp: "Design and pre-development of an airborne multi-species differential absorption Lidar system for water vapor and HDO isotope, carbon dioxide, and methane observation", International Conference on Space Optics — ICSO 2020, Online01.04.2021 - M. Livrozet: Optical and Optomechanical Design of the MERLIN Laser Optical Bench. ICSO 2020 Conference, online
April
01.04.2021 - Marie Livrozet: "Optical and Optomechanical Design of the MERLIN Laser Optical Bench", ICSO 2020 Conference, online
06.04.2021 - Kira van der Straeten: "Hybrid Joining Processes", Advanced Joining Processes Course, Online
08.04.2021 - Marius Dahmen: "Laser-based processing of polymeric tribological coatings for engine pistons", Surfaces, Interfaces and Coatings Technologies International Conference (SICT 2021), Paris (online)
19.04.2021 - Peter Abels: "Inline bildbasierte Qualitätsüberwachung mit Methoden der Künstlichen Intelligenz", LEF 2021-Bricks - Digitalisierung für die Prozesskontrolle, Online
21.04.2021 - Astrid Saßmannshausen: "Flexible Tuning of Surface Properties with Ultrafast Laser Polishing", 6. UKP-Workshop, Aachen (online)
21.04.2021 - Hans Huber: "Poster: Efficient frequency conversion for the connection of solid state qubits to fiber networks", 9th NRW Nano-Conference, online
22.04.2021 - Karsten Lange: "USP-PROCESSING IN BATTERY AND HYDROGEN TECHNOLOGY", 6. UKP-WORKSHOP 2021 , Aachen
TECHNOLOGY. 6. UKP-WORKSHOP 2021, Aachen
23.04.2021 - Florian Herbst: "MIR imaging with undetected photons by means of a nonlinear Mach-Zehnder-type interferometer", 9th NRW Nano Conference, Münster
Mai
04.05.2021 - Moritz Kröger: "Kubernetes running Manufacturing systems. A perfect match?", Kubecon Europe 2021 - Kubernetes on Edgeday, Virtuell
07.05.2021 - Elie Haddad: "Comparison between copper-aluminium laser joining using short pulses and continuous wave mode", PCIM 2021, Digital über Zoom
11.05.2021 - Simon Vervoort: "Integration of sensors and printed electronics into LPBF parts", EPMA Additive Manufacturing Seminar, Online
13.05.2021 - Nicole Grubert: "Ring-Shaped Conoscopic Holography for Distance and Tilt Measurement", CLEO Conference 2021, Online / San Jose USA
14.05.2021 - Juri Munk: How to predict material properties of LPBF-manufactured complex parts. 5th ASTM AM CoE Snapshot Workshop (Virtual), Virtuell
18.05.2021 - Alexander Olowinsky: "How Lasers improve battery production", EALA – European Automotive Laser Applications, Online
Juni
08.06.2021 - Nam Nguyen: "Process monitoring in laser transmission welding of plastics by using deep learning algorithms", LPM Konferenz, Online
08.06.2021 - Alexander Meyer: "Multi-beam processing with individually addressable beamlets: Calibration & data processing", LPM 2021, LPM 2021 / online
08.06.2021 - Ludwig Pongratz: "Beam shaping the Direct Laser Interference Patterning spot", LPM2021 - Online, Hirosaki - Online
08.06.2021 - Astrid Saßmannshausen: "Ultrashort Pulse Laser Micro Polishing by Discontinuous Surface Melting Using Burst Mode", LPM 2021, Japan (online)
09.06.2021 - Christian Heinigk: "A multi-scale model for ultra short pulsed parallel laser structuring --- Part I. the micro-scale model", The 22nd International Symposium on Laser Precision Microfabrication, Hirosaki, Aomori, Japan / Online
11.06.2021 - Annika Völl: "Optische Systeme für die Lasermaterialbearbeitung", LIPA Messe, Aachen (online)
15.06.2021 - Peter Abels: "Lasertechnik und Industrie 4.0 Eine Symbiose für die Produktion von Morgen", Ostbelgien auf dem Weg zur Industrie der Zukunft, Online
16.06.2021 - Martin Walochnik: "Quantum Technologies at Fraunhofer ILT", ML4Q Technology Day 2021, online, MeetAnyway
16.06.2021 - Martin Kratz: "Ultraschnelle Phänomene bei der Mikrostrukturierung von Glas mittels Ultrakurzpulslasern", LEF, Online
18.06.2021 - Peter Abels: "Digitalisierung und Künstliche Intelligenz in der Lasertechnik", AGIT Unternehmerfrühstück, Online
21.06.2021 - Michael Strotkamp: "Rugged, Versatile Diode-Pumped Alexandrite Lasers for Doppler Resonance Lidars", CEDAR workshop, Online
22.06.2021 - Chrisitan Weiß: Assessment of sustainability of metal additive manufacturing in a production environment, Rapid.Tech 3D 2021, Essen, Deutschland
24.06.2021 - Linda Hoff: "Laser sintering of ceramic solid-state battery materials", LiM 2021, virtuell
Juli
22.07.2021 - J. Munk: Einflussfaktoren im additiven Fertigungsprozess (LPBF) von TiAl6V4 auf die Materialeigenschaften. 5. AM Forum - Digital Edition 2021, Virtuell
August
03.08.2021 - Chrisitan Weiß: Investigation Towards AlSi10Mg Powder Recycling Behavior in the LPBF Process and Its Influences on Mechanical Properties, Solid Freeform Fabrication 2021, Online
September
14.09.2021 - T. Lantzsch: Innovative Laser Powder Bed Fusion (LPBF) machine concepts for increased productivity and build volume. German-Japanese Additiv Manufacturing Forum, Virtuell
16.09.2021 - C. Vedder: THIN FILM LASER PROCESSING FOR HYDROGEN APPLICATIONS. Fraunhofer ILT, LKH2, Aachen
17.09.2021 - F. Rackerseder: 20 kW Optical System for Growing Ga2O3 by the LDFZ method. 10th French-German Workshop on Oxide, Dielectric, and Laser Crystals WODIL 2021, Idar-Oberstein
Oktober
05.10.2021 - K. Kreuels: P2 - ArchiTissue - 3D-Architecture of biohybrid cardiovascular implants by additive manufacturing. Besuch und Vortrag BMT2021, Hannover
06.10.2021 - K. Kreuels: Utilizing direct-initiation of thiols for photoinitiator-free stereolithographic 3D printing of mechanically stable scaffolds. Besuch und Vortrag BMT2021, Hannover
07.10.2021 - J. Munk: Geometrieeinfluss auf die Materialeigenschaften additiv gefertigter Bauteile aus TiAl6V4. Simulation Conference 2021 digital, Virtuell
12.10.2021 - N. Prätzsch: Detection of contamination of protective windows in Laser Powder Bed Fusion by means of a line scan camera. SPIE Laser Damage, Online
18.10.2021 - M. Brucki: Influence of particle size on the surface texture of coatings made by extreme high-speed laser material deposition (EHLA). Oberflächenbeschaffenheit im EHLA, Online
November
01.11.2021 - F. Fischer: Detection of geometrical deviations in Laser Powder Bed Fusion using a line camera based optical monitoring system. ASTM ICAM 2021 Conference, Anaheim, CA, USA / Online
02.11.2021 - L. Hoff: Laser sintering of ceramic-based solid-state battery materials. IBPC 2021, Braunschweig
02.11.2021 - J. Schaible: Extreme High-speed Laser Material Deposition for Additive Manufacturing. ASTM ICAM 2021 (virtuell), Online
04.11.2021 - C. Vedder: Laser-based Manufacturing of Anti-Corrosive and Tribological Coatings. SURFCON KOREA 2021, Virtuell
04.11.2021 - A. Vogelpoth: Processing Elemental Powder Blends with Miniaturized Process Chamber For LPBF. Metal Additive Manufacturing Conference MAMC, Wien
04.11.2021 - T. Laag: Improvement of part accuracy by combination of pulsed wave (pw) and continuous wave (cw) Laser Powder Bed Fusion. Vortrag auf Konferenz, Wien
08.11.2021 - H. Huber: Vortrag: Efficient difference frequency generation for quantum frequency conversion in a multimode PPLN-waveguide. Photonics West 2021, online
15.11.2021 - C. Fricke-Begemann: Laser-based inverse production enables the recycling of electronic components. 13th World Congress and Expo on Recycling, online
15.11.2021 - K. Kreuels: Tuning Mechanical Properties by Rational Design of 3D Printed Scaffolds for Heart Valve Tissue Engineering. Besuch und Präsentation TERMIS2021, Digital
18.11.2021 - T. Lantzsch: Laser Powder Bed Fusion of nickel-base alloy 625 using a ring-mode laser intensity distribution. TCT Conference @ Formnext 2021, Portalhaus Messe Frankfurt
18.11.2021 - T. Lantzsch: Potentials of ring intensity distributions for LPBF processing of nickel-base alloys. Formnext 2021, Messe Frankfurt
23.11.2021 - A. Olowinsky: Laserstrahlschweißen von Kupfer für Anwendungen in Batterie und Leistungselektronik. CTL-Fortbildungsseminar „Schweißen von Kupferwerkstoffen“, Duisburg
25.11.2021 - L. Hoff: Sintern Keramischer Festkörperbatterieschichten mittels Excimerlaserstrahlung. OptecNet Jahrestagung 2021, Hannover
Dezember
01.12.2021 - C. Fricke-Begemann: Analysis of lead alloys for scrap recycling. EMSLIBS 2021 - 11th Euro-Mediterranean Symposium on Laser-Induced Breakdown Spectroscopy, Gijón, Spanien
02.12.2021 - M. Jung: Verfahren der Laserpolitur von Glaswerkstoffen. 11. Workshop Laserbearbeitung von Glaswerkstoffen, Digital
2020
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2020
Januar
28.01.2020 - Karsten Braun: "Laserpolitur und Laserformkorrektur von Gläsern", Photonik Kolloquium, Buchs
31.01.2020 - Andrea Brenner: "Laser polishing using ultrashort pulse laser", SPIE Photonics West 2020, San Francisco
Februar
03.02.2020 – Dieter Hoffmann: “High-power ultrafast lasers - the door to new applications swings open”, The Lasers & Photonics Marketplace Seminar, Photonics West, San Francisco
03.02.2020 – Pelin Cebeci, Jhon Vera Mosquera, Martin Giesberts, Benjamin Erben, Oliver Fitzau, Marco Höfer, Hans-Dieter Hoffmann: “Highly stable, high power hybrid fiber and Innoslab amplifier for narrow linewidth signals”, Photonics West, San Francisco
03.02.2020 – Sarah Klein, Martin Giesberts, Patrick Baer, Oliver Fitzau, Martin Traub, Hans-Dieter Hoffmann: “Fiber Bragg gratings in active multimode XLMA fibers for highpower kW-class fiber lasers”, Photonics West, San Francisco
04.02.2020 – Sebastian Nyga, Bernd Jungbluth, Florian Elsen, Anika Röhrig, and Hans-Dieter Hoffmann: "Picosecond laser source at 3.4 microns for laser material processing of polymers", Photonics West, San Francisco
10.02.2020 - Cord Fricke-Begemann: "Automated inverse production of end-of-life electronics provides novel secondary raw materials", Mineral Recycling Forum 2020, Aachen
20.02.2020 - Matthias Brucki: "Laser-based Manufacturing im Windkraftanlagenbau", Vorstellung Lasertechnik für Windbranche, Aachen
20.02.2020 - Min-Uh Ko: "Laser Material Deposition: Potential Application in Wind Power Technology", CWD-Workshop Follow-Up Meeting at Fraunhofer ILT: Laser Based Manufacturing in Wind Power Technology, Fraunhofer ILT
25.02.2020 – Lukas Bahrenberg: "Nanoscale grating characterization through EUV spectroscopy aided by machine learning techniques", SPIE Advanced Lithography 2020, San Jose, USA
26.02.2020 – Bernhard Lüttgenau: "Novel high-contrast phase-shifting masks for EUV interference lithography" (Kurzvortrag zu Poster), SPIE Advanced Lithography 2020, San Jose, USA
März
03.03.2020 - Reinhard Noll: "Erprobung einer Prozesslinie zur automatisierten Zerlegung und Sortierung wertvoller Komponenten von Elektronikplatinen", Berliner Recycling- und Sekundärrohstoff-Konferenz 2020, Berlin
Mai
05.05.2020 – Martin Traub, "Microoptics for compact and multifunctional beam shaping of high-performance lasers", Photonics Hub Symposium - Microoptics 2020 (online)
15.05.2020 - Niklas Prätzsch: "Einfluss von Prozessnebenprodukten auf die relative Bauteildichte mittels Multi-Scanner LPBF gefertigter Proben aus 316L", DGM Fachtagung Werkstoffe und Additive Fertigung, Online
20.05.2020 - Cord Fricke-Begemann: "LIBS and Raman spectroscopy for upscaling of drill core scanning for mineral exploration and mining", Enhanced Exploration Webinar, Stockholm
Juni
09.06.2020 – Christian Heinigk: “Structure-Preserving Discretization of a Port-Hamiltonian Heat Conduction Problem”, ESCO Conference 2020, online
11.06.2020 - Jochen Vieker: "SYSTEMS FOR ACCELERATED TESTING OF EUVL COMPONENTS", EUVL Workshop, Online
22.06.2020 – Christian Weiß.: "Densification Behavior And Pore Morphology at High Layer Thicknesses for LPBF Processing of Gas- And Water-atomized 316L Powders", DDMC 2020, Berlin
23.06.2020 - Chao He: "Spectrometer-based Ultrashort Pulsed Laser selective Microstructuring of Ni/NiCr Multi-layer Coatings", LPM2020, virtuell
24.06.2020 - Chao He: "Recast-free helical drilling of fused silica using SHG picosecond laser pulses", LPM2020, virtuell
25.06.2020 - Karsten Braun: "Laser Polishing of 3D Printed Plastic Components", 3D-printing Value Chain Event, Online
29.06.2020 - Chao He: "Ultrafast laser multi-beam helical drilling for industrial applications", 15th International Laser Processing and Systems Conference (LPC 2020), virtuell
September
03.09.2020 - Wolfgang Schulz: "Towards Online-Prediction of Quality Features in Laser Fusion Cutting Using Neural Networks", Intelligent Systems Conference 2020 (IntelliSys 2020), Amsterdam, Netherlands, online
03.09.2020 - Ulrich Halm: "Towards Online-Prediction of Quality Features in Laser Fusion Cutting Using Neural Networks", Intelligent Systems Conference 2020 (IntelliSys 2020), Online (Amsterdam)
06.09.2020 - Karsten Braun: "Laser Polishing as a New Post Process for 3D-printed Polymer Parts", LANE 2020, Online
08.09.2020 – Oskar Hofmann: "Highly dynamic positioning of individual laser beams in a multi-beam system for laser surface processing", LANE 2020, online
09.09.2020 - Elie Haddad: "NANOSECOND PULSED FIBER LASER AS A TOOL FOR LASER MICRO WELDING", LANE 2020, online
14.09.2020 - Matthias Brucki: "Kombination einer laserauftraggeschweißten Korrosionsschutzschicht und einer thermisch gespritzten Verschleißschutzschicht", AIF-Projektabschluss KERAMIK, Online
14.09.2020 – Bernd Jungbluth, Florian Elsen, Florian Herbst, Dieter Hoffmann: „Long-Pass Type Quantum Imaging Interferometer with Undetected Photons in the Infrared Wavelength Range” (Poster), OSA Quantum 2.0 (online)
15.09.2020 – Sarah Klein: „Toleranzanalyse und thermische Auslegung optischer Systeme“, Seminar Rapid Prototyping für die Montage optischer Systeme, Aachen
15.09.2020 - Christian Kalupka: "Laserbasierte Fertigung von 3D-Glasbauteilen für hochpräzise Montageprozesse", Rapid Prototyping für die Montage optischer Systeme, Aachen
16.09.2020 - Manuel Jung: "hybrid process chain for polishing of optics made from glass", LaP 2020 4TH conference on laser polishing, Online
17.09.2020 - Marcelo de Oliveira Lopes: "Schnittpräzision und Schmelzfilmdynamik beim Schneiden von hochlegiertem Stahl mit Hochleistungs-Faserlasern", DVS2020, Online
23.09.2020 Sophia Schröder: "Accuracy analysis of a stand-alone EUV spectrometer for the characterization of ultrathin films and nanoscale gratings", SPIE Photomask Technology + EUV Lithography, Onlinekonferenz
24.09.2020 - Patrick Balhorn: "Ablation patterns for the identification of valuable materials in electronic components with LIBS", 11th International Conference on Laser-Induced Breakdown Spectroscopy - LIBS 2020, Kyoto, Japan
25.09.2020 - Reinhard Noll: "Laser measurements of physical and chemical quantities as enabling technology for inverse production –contributions for a sustainable circular economy", 11th International Conference on Laser-Induced Breakdown Spectroscopy - LIBS 2020, Kyoto, Japan
25.09.2020 - Frederik Schreckenberg: "Multiclass, multilabel LIBS data analysis with machine learning classifiers", 11th International Conference on Laser-Induced Breakdown Spectroscopy - LIBS 2020, Kyoto, Japan
29.09.2020 – Prof. Constantin Häfner: EffiLas++, 3. EffilasVerbandstagung, Aachen
Oktober
03.10.2020 – Ulrich Halm: “Towards Online-Prediction of Quality Features in Laser Fusion Cutting Using Neural Networks”, Intelligent Systems Conference (IntelliSys 2020), 3-4 September 2020, Amsterdam (virtual)
15.10.2020 – Dieter Hoffmann: “Fraunhofer cluster of Excellence Advanced Photon Sources – CAPS”, Photonics Hub - virtueller Workshop, Aachen
19.10.2020 - Jonathan Schaible: "Development of a High-speed Laser Material Deposition Process for Additive Manufacturing", ICALEO 2020, Online
20.10.2020 - Jonathan Schaible: "Particle Velocity Measurement in Powder Gas Jets of Coaxial Powder Nozzles for Laser Material Deposition", ICALEO 2020, Online
22.10.2020 - Florian Fuchs: "Determination of temperature dependent optical properties of amorphous silicon thin films at high heating rates for CMOS compatible laser crystallization processes", MicDat 2020 (Konferenz), Online
22.10.2020 – Dr. Annika Völl: Optik-Design @ TOS, Online-Treffen AG Optik-Design (Optence e. V.), digital
26.10.2020 - Christian Vedder: "Additive Manufacturing of Embedded Sensors and Electronic Coatings", Fraunhofer Soultion Days, Online
27.10.2020 - Wolfgang Schulz: "Simulation at Fraunhofer ILT. workshop Industry network 'HYBRID-3D'", online
27.10.2020 – Dieter Hoffmann: “Fraunhofer Cluster of Excellence Advanced Photon Sources – Multi kW Ultrafast Lasers and Applications”, Photonics Hub - LITEK virtueller Workshop, Litauen
27.10.2020 – Wolfgang Schulz: „Simulation of additive and subtractive 3D processing”,
3rd industry network meeting of the network „HYBRID-3D“, EURA AG, online
November
03.11.2020 - Sören Hollatz: "LASER MEETS BATTERY CELLS", International Battery Production Conference 2020, online
04.11.2020 - Sascha Brose: "In-lab EUV Dual Beamline for industrial and scientific applications", EUV Source Workshop, Onlinekonferenz
10.11.2020 – Dr. Annika Völl: "Design of Optical Freeform Surfaces for LED Applications", 21. Treffen der AG LED Technik (Optence e. V.), digital
11.11.2020 - Alexander Olowinsky: "NEUESTE ENTWICKLUNGEN FÜR DIE LASERBASIERTE VERBINDUNGSTECHNIK", CTL-Fortbildungsseminar „Schweißen von Kupferwerkstoffen“, Duisburg
16.11.2020 – Philipp Kucirek, Benjamin Erben, Florian Hörmann, Martin Traub, and Marco Hoefer: “Rod and Slab Type Cw and Q-switched Tm:YLF Lasers”, HILAS Prag
24.11.2020 - Christoph Janzen: "Inline Cross-Correlation Dynamic Light Scattering", EU Projekt PAT4Nano - Webinar, Online
Dezember
08.12.2020 - Matthias Brucki: "High-Speed Laser Material Deposition as an Enabler for economic AM", Keynote Speech, Online
2019
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2019
Februar
06.02.2019 – S. Klein: “Investigation of fiber Bragg gratings for high-power, multi-mode, XLMA-based fiber lasers”, SPIE LASE Fiber Lasers XVI Technology and Systems (Session: kW-class fiber Lasers and amplifiers II) - San Francisco, USA
13.02.2019 – C. Engelmann: „Vollautomatisiertes Fügen von thermoplastischen Faserkunststoffverbunden mit Metallstrukturen in der FlexHyJoin Fertigungszelle, EALA - European Automotive Laser Applications 2019, Bad Nauheim, Deutschland
19.02.2019 – D. Hoffmann: „Advanced Photon Sources: Höchstleistungs-Ultrakurzpulslaser“, Fraunhofer Netzwert-Symposium, München, Deutschland
20.02.2019 – A Häusler: „Laser-Based Joining Processes for Power Electronics and Electromobility Applications“, LSE – Lasersymposium Elektromobilität Applications 2019, Aachen, Deutschland
26.02.2019 – A. Olowinsky: „Anpassung der Prozessbedingungen zur Einstellung von Temperaturfeldern beim laserbasierten Mikrofügen“, LEF 2019, Laser in der Elektronikproduktion & Feinwerktechnik, Erlangen, Deutschland
März
07.03.2019 - Florian Elsen, Bernd Jungbluth, Sebastian Nyga, Jochen Wüppen, Hans-Dieter Hoffmann: "High-power 2-micron optical-parametric frequency converter with sub-picosecond pulse duration," Proc. SPIE 10896, Solid State Lasers XXVIII: Technology and Devices, 108960O
12.03.2019 – J. Munk: „Entwicklung und Anpassung von Hochtemperatur-Legierungen für die additive Fertigung“, Forschungsnetzwerk Energie – Flexible Energieumwandlung AG5-Sitzung, Stuttgart, Deutschland
12.03.2019- D. Ziebura: „Potenzial generativ gefertigter Bauteile in der Getriebetechnik“, 18. Antriebstechnische Kolloquium - ATK-2019, Aachen, Deutschland
14.03.2019- Prof. J. H. Schleifenbaum: “Current and future developments in metallic 3D printing”, RapidPro 2019, Veldhoven, Niederlande
19.03.2019 - A. Munk, B. Jungbluth, M. Strotkamp, H.-D. Hoffmann, R. Poprawe, J. Höffner: "Alexandrite laser in Q-switched single longitudinal mode operation pumped by a fiber-coupled diode module," Proc. SPIE 10896, Solid State Lasers XXVIII: Technology and Devices
20.03.2019 – F. Zibner: „Advanced manufacturing technologies using ultra-short pulsed laser sources”, LPC
20.03.2019 – Prof. R. Poprawe.: “Latest advancements in Additive Manufacturing and Ultrafast Laser Ablation, Digitalization of Laser Material Processing”, Laser Photonics, China, Shanghai, China
21.03.2019 – T. Schopphoven: „Extreme High-speed Laser Material Deposition”, 14th International Laser Processing and Systems Conference (LPC 2019), Shanghai, China
21.03.2019 – C. He: „Efficiency enhanced high quality helical drilling and cutting for industrial applications”, 14th International Laser Processing and Systems Conference, Shanghai, China
28.03.2019 – D. Hoffmann: “AVERAGE POWER SCALING OF ULTRAFAST LASERS”, 1. JuSPARC Workshop, Vaals, Niederlande
29.03.2019 – Prof. J. H. Schleifenbaum: „Chancen und Risiken für die Deutsche Luft- und Raumfahrtindustrie“, Vortrag BDLI - Referat Wirtschaft und Recht, Berlin, Deutschland
April
03.04.2019 – M. Dahmen: „Properties of dissimilar laser welded lap welds between high manganese and different ultra-high strength steels”, HMnS 2019 – 4th International Conference on Medium and High Manganese Steels, Aachen, Deutschland
04.04.2019 – S. Hollatz: „From Cells to Systems – Automated Contacting of Battery Cells using Laser Beam Welding”, Kraftwerk Batterie 2019, Eurogress Aachen, Deutschland
10.04.2019 – J. Finger: „Microstructures near the Diffraction Limit-Fabrication and Applications”, UKP-Workshop, Aachen, Deutschland
11.04.2019 – Prof. Schleifenbaum: „Aktuelle Entwicklungen und neue Möglichkeiten im metallischen 3D Druck“, Sitzung additive Fertigung/3D-Druck Industrie- und Handelskammer, Aachen, Deutschland
30.04.2019 – D. Hoffmann: „ADVANCED PHOTON SOURCES – MULTI-KW FEMTOSECOND LASERS FOR DISRUPTIVE APPLICATIONS”, 5. UKP Workshop Aachen, Deutschland
Mai
06.05.2020 - Höfer, M., Mosquera, J. J. V., Lutum, R., Erben, B., & Hoffman, H. D. 410W single stage in band pumped Nd: YVO4 INNOSLAB amplifier for ps pulses (Conference Presentation, 6. Mai 2019). In Solid State Lasers XXVIII: Technology and Devices (Vol. 10896, p. 108960G), International Society for Optics and Photonics
06.05.2020 - Johannes Weitenberg: "Nonlinear pulse compression at high average power by multi-pass-cell spectral broadening," CLEO 2019, Special Symposium "high average power ultrafast lasers: trends, challenges and applications"
09-10.05.2019 - R. Noll, K. Bergmann, C. Fricke-Begemann, F. Schreckenberg: Herausforderungen und Perspektiven der inversen Produktion für nachhaltige Wertstoffkreisläufe – aktuelle Entwicklungen zur automatisierten Demontage und Entstückung von Elektronikplatinen für die Gewinnung von Wertstoffen, 5. Symposium Rohstoffinnovationen und Rohstoffeffizienz, Pfinztal, Deutschland
13.05.2019 – S. Fries / M. B. Wilms: „Laser based Additive Manufacturing of WC-Co with High Temperature Powder Bed Pre-heating”, Tooling 2019, Aachen, Deutschland
15.05.2019 – S. M. Fink: „Laserbasierte Prozesse in der Batterieproduktion“ (Laser Processes in Battery Production), ELECTRICAL ENERGY STORAGE (EES 2019), München, Deutschland
16.05.2019 – S.Stoyanov: Quantitative Analysis of the Temporal Distance between Melt Waves on the Cutting Front Apex during Laser Fusion Cutting of Stainless-Steel Sheet Metal with 1 Micron Wavelength, LiM 2019, München, Deutschland
21.05.2019 – Prof. R. Poprawe: “Digital Photonic Production for a better future of the global society”, Digitalization of Photonics, LAMP 2019, Hiroshima, Japan
22.05.2019 – T. Schopphoven: „Coating of Brake Discs through Extreme High-speed Laser Material Deposition”, EuroBrake 2019, Dresden, Deutschland
22.05.2019 – W. Chung: „Investigation on the influence of the overlap factor during the expansion of the weld joint area with modulated laser beam welding over gap”, LAMP 2019, Hiroshima, Japan
22.05.2019 – D. Haasler: „Investigation of the Ablation Rate of Stainless Steel by means of few Ultrashort Laser Pulses up to 150 J/cm²”, LAMP, Hiroshima, Japan
22.05.2019 – A. Brenner: „Ultrafast laser structuring within a process chain - influence of the surface morphology”, LAMP, Hiroshima, Japan
23.05.2019 – S. Janssen: „Asymptotic Bore Hole Model for Ultrashort Pulse Laser-Drilled Carbon Fiber Preforms”, LAMP, Hiroshima, Japan
23.05.2019 – P. Nguyen: „Absorber-free quasi-simultaneous laser welding of transparent microfluidic devices”, LAMP 2019, Hiroshima, Japan
23.05.2019 – D. Petring: „About three fundamental mysteries regarding fiber laser beam cutting of stainless steel”, LAMP2019 – the 8th International Congress on Laser Advanced Materials Processing, Hiroshima, Japan
23.05.2019 – D. Petring: „New optimization procedure for efficient laser beam cutting of fiber reinforced plastics”, LAMP2019 – the 8th International Congress on Laser Advanced Materials Processing, Hiroshima, Japan
23.05.2019 – C. He: „Adaption of energy deposition in helical drilling of multidimensional microholes using USP Laser”, LPM2019 - The 20th International Symposium on Laser Precision Microfabrication, Hiroshima, Japan
23.05.2019 – C. He: „Helical drilling technology using ultrashort pulse lasers: from lab to fab”, Open Seminar -The University of Tokyo, Tokio, Japan
24.05.2019 – B. Bornschlegel: „In-situ analysis of heat accumulation during ultrashort pulsed laser ablation”, LAMP, Hiroshima, Japan
Juni
05.06.2019 – M. Dahmen: „Tracking weld metal cracking in laser beam welded dissimilar joints between cast and LMD produced Stellite 31 and Nimonic 75”, ICWAM 2019 – 2nd International Congress on Welding, Additive Manufacturing and Associated Non Destructive Testing, Metz, Frankreich
12.06.2019 – S.-K. Rittinghaus: “Laser based additive manufacturing of Titanium Aluminides”, 14th world conference on titanium Ti-2019, Nantes, Frankreich
14.06.2019 – Prof. Schleifenbaum: “Additive Manufacturing (AM) for Medical Applications”, Helmholtz Konferenz Biomedizintechnik / HIA-Symposium, Aachen, Deutschland
18.06.2019 – A. Vogelpoth / S.-K. Rittinghaus: “Laser Additive Manufacturing of Titanium Aluminides for Turbomachinery applications”, ASME 2019 Turbo Expo, Phoenix, USA
23.06.-26.06.2019 - R. Noll, R. Ambrosch, G. Benke, M. Bergamos, M. Eschen, C. Fricke-Begemann, K. Leszczynska-Sejda, J. Makowe, F. Schreckenberg, A. Tori, F. Veglia: Interlinked machinery for the automated disassembly, separation and recovery of valuable materials from electronic equipment –progress of the ADIR project, 10th European Metallurgical Conference EMC 2019, Düsseldorf, Deutschland
24.06.2019 – prof. R. Poprawe: “Digital Photonic Production
Along the lines of Industry 4.0”, Digitalization of Photonics, LiM 2019, München, Deutschland
24.06.2019 – M. Brosda: „Laser Cutting of PE Polymer Films with Adapted Fiber Laser Beam Sources”, Lasers in Manufacturing Conference 2019 LiM, München, Deutschland
24.06.2019 – C. He: “Helical drilling of high-aspect-ratio microholes in stainless steel using ultrashort laser pulses”, LiM 2019 – Laser in Manufacturing – München, Deutschland
24.06.2019 - J. Höffner: et al., "A Novel Diode Pumped Alexandrite Ring Laser for Doppler Lidar," 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC), München, Deutschland
25.06.2019 – A. Meyer: „Selective Multibeam micro processing of metal with a 1x8 beam array”, LiM, München, Deutschland
25.06.2019 – M. Trenn: „Large-area UV-Processing with a novel 248 nm line beam system”, LiM, München, Deutschland
25.06.2019 – C. Kalupka: „Ultrafast Laser Ablation of Transparent Ceramics: The Role of the Pulse Duration on the Ablation Mechanismus”, LiM, München, Deutschland
25.06.2019 – S. Stoyanov: „Quantitative analysis of the temporal distance between melt waves on the cutting front apex during laser fusion cutting of stainless steel sheet metal with 1 micron wavelength”, LiM 2019 – Lasers in Manufacturing 2019, München, Deutschland
25.06.2019 – J. Finger: „MultiFlex - Ultrashort Pulsed Laser Processing at 1 Kilowatt Using a Flexible Multi Beam Approach”, LiM, München, Deutschland
26.06.2019 – D. Heußen: “Laser Powder Bed Fusion of pure copper by the use of green laser radiation”, LASER Munich, Forum Laser Materials Processing, München, Deutschland
26.06.2019 – M. Dahmen: „Dissimilar laser beam welding of a press hardened stainless martensitic and a cold worked stainless TWIP steel”, LiM 2019 – Lasers in Manufacturing 2019, München, Deutschland
27.06.2019 – J. K. Saewe / M. B. Wilms: „Influence of Preheating Temperature on Hardness and Microstructure of High-Speed Steel HS 6-5-3-8 Manufactured by Laser Powder Bed Fusion”, 10th INTERNATIONAL CONFERENCE ON MATERIALS FOR ADVANCED TECHNOLOGIES (ICMAT 2019), Singapore
27.06.2019 – T. Pichler: „Geometry-specific process control for increasing the efficiency of Laser Powder Bed Fusion (LPBF)”, Rapid.Tech 3D, Erfurt, Deutschland
27.06.2019 – T. Schmithüsen: „Mikroskopisches Stützendesign für die nass-chemische Nachbearbeitung von LPBF-gefertigten Bauteilen aus AlSi10Mg”, Rapid.Tech Fachkongress 2019, Erfurt, Deutschland
27.06.2019 – D. Petring: „Effects of laser beam power and power density distribution on process and quality issues during fiber laser cutting of stainless steel sheet metal”, LiM 2019 – Lasers in Manufacturing 2019, München, Deutschland
27.06.2019 – F. Schneider: „Cutting of composite materials: a quality and processing time optimized scan strategy for GFRP and CFRP”, LiM 2019 – Lasers in Manufacturing 2019, München, Deutschland
27.06.2019 – M. Rehberger: „Challenges and Opportunities for Laser-based Additive Manufacturing of Strain Sensors”, LASERS IN MANUFACTURING (LIM 2019), München, Deutschland
29.06.2019 – Prof. R. Poprawe: “Digital Photonic Production
Along the lines of Industry 4.0”, Digitalization of Photonics, 7th IAPLE Annual Conference & AGM, Hokkaido, Japan
Juli
08.07.2019 – K. van der Straeten: „Influence of Structure Characteristics on the Joint Strength of Plastic-Metal-Hybrid Joints”, IIW 2019 Annual Assembly, Bratislava, Slowakei
09.07.2019 – W. Chung: „Study on the thermal stress to the sensitive substrate during the LIMBO process”, IIW 2019 Annual Assembly, Bratislava, Slowakei
09.07.2019 – A. Olowinsky: „Laser Welding in battery and power Electronics applications”, Sino-German Alumni Expert Network (DCHAN-Engineering), Aachen Super C, Deutschland
09.07.2019 – S. Hollatz: „Overlap Joining of Aluminum and Copper using Laser Micro Welding with Spatial Power Modulation”, IIW 2019 Annual Assembly, Bratislava, Slowakei
09.07.2019 – P. Nguyen: „Modelling and simulation of absorber-free laser welding of transparent polymers”, IIW 2019 Annual Assembly, Bratislava, Slowakei
10.07.2019 – J. Helm: „Laser Welding of Laser-Structured Copper Connectors for Battery Applications and Power Electronics”, IIW 2019 Annual Assembly, Bratislava, Slowakei
11.07.2019 – Prof. J. H. Schleifenbaum: “Biologische Transformation“, Workshop Profilbereich Production Engineering, Aachen, Deutschland
16.07.2019 - F. Elsen, B. Jungbluth, S. Nyga, J. Wüppen, and D. Hoffmann: "High-Power Optical Parametric Generation and Amplification of Femtosecond Pulses at 2 Microns - Investigation of Pulse Duration Effects," in Nonlinear Optics (NLO), OSA Technical Digest (Optical Society of America, 2019)
25.07.2019 – S. Klein: “Toleranzanalyse und thermische Auslegung optischer Systeme”, Seminar Rapid Prototyping für die Montage optischer Systeme, WZL der RWTH Aachen, Aachen, Deutschland
25.07.2019 – W. Wirz: „Umwelttests zur Qualifizierung optomechanischer Baugruppen Praxisseminar (IPT): Rapid Prototyping für die Montage optischer Systeme“, Aachen, Deutschland
August
12.08.2019 – C. Knaak: „Deep learning-based semantic segmentation for in-process monitoring in laser welding applications”, SPIE Optical Engineering + Applications, San Diego, USA
13.08.2019 – T. Pichler: „Examination of the LPBF Process by Means of Thermal Imaging for the Development of a Geometric-specific Process Control”, ANNUAL INTERNATIONAL Solid Freeform Fabrication SYMPOSIUM, Austin, USA
21.08.2019 – M. Rehberger: „Laser-based manufacturing of functional coatings”, Consortium Project »Printed Electronics«, KEX Knowledge Exchange AG, Aachen, Deutschland
September
05.09.2019 – M. Rehberger: „Gedruckter Sensor ersetzt Dehnungsmessstreifen”, VDI/VDE-GMA Fachausschuss 2.11 (38. Sitzung), Luxemburg
9.09.-13.09.2019 - R. Noll, C. Fricke-Begemann, S. Connemann, F. Schreckenberg: „Challenges and perspectives of inverse production for sustainable material recycling – what LIBS can contribute, Euro-Mediterranean Symposium on Laser-induced Breakdown Spectroscopy, EMSLIBS 2019, Brno, Tschechien
11.09.2019 – Prof. Schleifenbaum: „Development in (metal) 3 D printing for next generation smart products“,Sim-AM 2019, Pavia, Italien
12.09.2019 – M. Brucki: „How to produce corrosion and wear resistant brake discs with EHLA”, Internationale Automobil-Ausstellung (IAA) Frankfurt, Deutschland
12.09.2019 – M. Dahmen: “Laser-based production of functional layers for automotive applications”, Internationale Automobil-Ausstellung (IAA 2019), Frankfurt am Main, Deutschland
16.09.2019 – M. Brucki: „Korrosions- und Verschleißschutz mittels extremen Hochgeschwindigkeits-Laserauftragschweißen”, DVS CONGRESS 2019 Rostock, Deutschland
16.09.2019 – J. Weitenberg: "Hochleistungs-Ultrakurzpuls-Verstärker," CAPS Summer School, Jena, Deutschland
18.09.2019 – J. Bremer: „ProMat 3D Abschlusstreffen”, Frankfurt a. M.: Hybrid-additive Fertigung im Rahmen von ProLMD
19.09.2019 – C. Kalupka: „ Laserbearbeitung von Keramiken: Technologien für fortgeschrittene Anwendungen”, Ceramitec Conference, München, Deutschland
19.09.2019 – G. Rödler: „Laser-Based Additive Manufacturing of eutectic Al-Ni alloys”,
Alloys for Additive Manufacturing Symposium (AAMS 2019), Göteborg, Schweden
19.09.2019 – E. A. Jägle / M. B. Wilms: „Controlling phase transformations during laser AM - The intrinsic heat treatment effect and beyond”, Alloys for Additive Manufacturing Symposium (AAMS 2019), Göteborg, Schweden
20.09.2019 – J. K. Saewe / M. B. Wilms: „Additive Manufacturing of High-Speed Steel by Applying Preheating Temperatures during Laser Powder Bed Fusion”, Alloys for Additive Manufacturing Symposium (AAMS 2019), Göteborg, Schweden
20.09.2019 – P. Kürnsteiner / M. B. Wilms: „Exploiting intrinsic heat treatment to trigger precipitation reactions in maraging steels during laser additive manufacturing”, Alloys for Additive Manufacturing Symposium (AAMS 2019), Göteborg, Schweden
24.09.2019 – C. Engelmann: “Joining of Plastic/Magnesium Hybrid Components by Overmoulding Laser Microstructures”, Workgroup Hybrid Thermoplastic Composites, AZL, Aachen, Deutschland
24.09.2019 – K. van der Straeten: “Metal meets composites – Laser-based hybrid joining”, Workgroup Hybrid Thermoplastic Composites, AZL, Aachen, Deutschland
26.09.2019 – J. Bremer: “Measurement of Robotic Path Deviation and its Influence on Additively Manufactured Components“, CAMX 2019, Anaheim, USA
Oktober
02.10.2019 – C. Gayer: „Selective Laser Sintering of Biodegradable Polymers for Bone Regeneration”, EORS 2019 – Annual Meeting of the European Orthopaedic Research Society, Maastricht, Niederlande
07.10.2019 – J. Schaible: “Live User Solutions Roundtables, Topic: “Extreme High Speed Laser-Assisted Deposition: A Novel Process for Turbine Parts?” ICALEO, Orlando, USA
08.10.2019 – M. Brosda: „Analysis of the Interaction Process During Laser Transmission Welding of Multilayer Polymer Films with Adapted Laser Wavelength by Numerical Simulation and Thermography”, ICALEO 2019, Orlando, USA
08.10.2019 – A. Olowinsky: „Investigation of Non-Optical-Contact Glass Welding with Ultrafast Laser”, ICALEO 2019, Orlando, USA
09.10.2019 – S. Klein: “Frequency stabilization of multimode diode lasers with fiber Bragg gratings”, 2019 IEEE High Power Diode Laser & Systems Conference, Coventry, Vereinigtes Königreich
09.10.2019 – M. Adams: “GPU-accelerated wave-optical simulation of beam-transformation system for high-power diode lasers”, 2019 IEEE High Power Diode Laser & Systems Conference, Coventry, Vereinigtes Königreich
09.10.2019 – S. Hollatz: „Neueste Entwicklungen für die laserbasierte Verbindungstechnik”, Technologieseminar Wolf Produktionssysteme 2019, Freudenstadt, Deutschland
10.10.2019 – H. D. Hoffmann, QUANTUM TECHNOLOGIES – NEXT GENERATION LASERS, High-level Dialogue on „Quantum Technologies - Challenge and Potential for Real World Applications“, Tokyo, Japan
10.10.2019 – J. Munk: “Projektskizzenvorstellung: Geometrieeinfluss auf die mechanischen Eigenschaften HIP-behandelter LPBF-Bauteile aus TiAl6V4”, DGM Fachausschusssitzung Additive Fertigung 2019, Bremen, Deutschland
10.10.2019 – S. Stoyanov: „Investigation on the melt ejection and burr formation during laser fusion cutting of stainless steel”, ICALEO 2019 – 38th International Congress on Applications of Lasers and Electro-Optics, Orlando, USA
11.10.2019 – M. Traub: “Robust optical systems for high power lasers in the multi-kW regime”, EPIC Meeting on High Power Laser Systems at PBF, Almelo, Niederlande
11.10.2019 – Prof. R. Poprawe: “Latest developments in high Power Laser Technology for industrial Applications”, Digitalization of Photonics, Shenzen Universität, China
14.10.2019- C. Weiß: „Influence Of Atomization Media On The Densification Behavior And As-built Surface Roughness Of 316L Samples Produced By Laser Powder Bed Fusion”, EuroPM 2019, Maastricht, Niederlande
14.10.2019 – Prof. Schleifenbaum: “Powder based Laser Processes in the Context of Digital Photonic Production and Industrie 4.0. EuroPM 2019”, Maastricht, Niederlande
14.10.2019 – S. Fries / M. B. Wilms: „Influence of laser energy input on the microstructure development of additively manufactured WC-Co hardmetal”, EuroPM 2019, Maastricht, Niederlande
15.10.2019 – Prof. R. Poprawe: “Latest developments in high Power Laser Technology for industrial Applications”, Digitalization of Photonics, Sino-German Cooperation Summit on Intelligent Manufacturing, Nanjing, China
15.10.2019 – C. He: “High-precision helical drilling technology: from lab to fab”, 4th Sino-German Cooperation Summit on Intelligent Manufacturing – Nanjing, China
16.10.2019 – Prof. Schleifenbaum: “Digital Additive Production – Potentials and Challenges for Digital Additive Process Chains “, CADFEM Ansys Simulation Conference, Kassel, Deutschland
18.10.2019 – Prof. R. Poprawe: “Industrie 4.0 and Digital Photonic Production”, World Intelligent Manufacturing Conference 2019, Nanjing, China
23.10.2019 – J. Vieker: “Compact EUV source for metrology and irradiation experiments, 313. PTB Seminar VUV & EUV Metrology, Berlin, Deutschland
24.10.2019 – Prof. R. Poprawe.: „Wissenschaft und Wirtschaft: Global orientierte Innovation in Deutschland – mit China?!“, Projekt Leonardo, Aachen, Deutschland
24.10.2019 – W. Chung: „Process studies on copper laser beam welding over gap by using disc laser at green wavelength”, AJP 2019, Ponta Delgada, Portugal
25.10.2019 – K. van der Straeten: “Investigations of the Ageing Behaviour of Laser-joined Plastic-Metal Hybrid Compounds”, AJP 2019, Ponta Delgada, Portugal
25.10.2019 – S. Hollatz: „Processing of Keyhole Depth Measurement Date during Laser Beam Micro Welding”, AJP 2019, Ponta Delgada, Portugal
25.10.2019 – M. Brosda: „Investigations on the Influence of Beam Shaping in Laser Transmission Welding of Multi-Layer Polymer Films with Wavelength-Adapted Diode Laser Beam Sources”, AJP 2019, Ponta Delgada, Portugal
29.10.2019 – P. Nguyen: „Projektvorstellung: AFRELAS”, DVS AG W4.12, Bingen, Deutschland
November
04.11.2019 – H. Faidel: “Future Laser Platform - FULAS for Advanced Laser Sources for Space Operation”, ESA Workshop on innovative technologies for space optics
05.11.2019 – K. Bergmann: “Characterization of discharge based plasmas in the spectral range of 20-50 nm”, EUV Source Workshop, Amsterdam, Netherlands
06.11.2019 - Prof. J. H. Schleifenbaum: “The development of metal 3D printing in the age of digitization” FISITA World Mobility Summit, Nagoya, Japan
08 11 2019 - Prof. J. H. Schleifenbaum: „Aktuelle Entwicklungen im metallischen 3-D Druck“24. Fachtagung Rapid Prototyping, Lemgo, Deutschland
13.11.2019 - Prof. J. H. Schleifenbaum: „Vom Hype zur Fertigung – Future Developments in 3D printing“, VDI-Fachtagung, Wissenstransfer Zerspanung, Düsseldorf, Deutschland
13.11.2019 – Prof. R. Poprawe: “The Future of Digital Photonic Production”
Digitalization of Photonics, Mittweidaer Lasertagung, Mittweida, Deutschland
14.11.2019 – C. Gayer: „Selektives Lasersintern – Entwicklung neuer Optikkonzepte sowie Verarbeitung von bioresorbierbaren Polymeren”, Sitzung des DGM Fachausschusses Polymerwerkstoffe, Würzburg, Deutschland
18.11.2019 - Prof. J. H. Schleifenbaum: „Digital Additive Production - Oder: Kann ich auch einfach in Ruhe weiterleben?“, Technologieforum Georgsmarienhütte, Deutschland
18.11.2019 – J. K. Saewe: „Influence of preheating temperature on hardness and microstructure of high-speed steel HS6-5-3-8 by Laser Powder Bed Fusion”, Metals for Additive Manufacturing Conference (MAMC), Örebro, Sweden
19.11.2019 – P. Nguyen: „Laser based production of polymer microfluidics components”, HIGH-TECH FORUM Compamed, Düsseldorf, Deutschland
19.11.2019 – D. Hoffmann: “ADVANCED PHOTON SOURCES AND THEIR APPLICATIONS”, SPECTARIS-Forum Photonik 4.0, Berlin, Deutschland
21.11.2019 – C. Tenbrock: „Scalable Machine Concept for Laser Powder Bed Fusion”, TCT Conference @ formnext, Frankfurt, Deutschland
26.11.2019 – M. B. Wilms / S. Rittinghaus: „Laser Additive Manufacturing of intermetallic alloys for high-temperature applications”, Metal Additive Manufacturing Conference (MAMC 2019), Örebro, Schweden
26.11.2019 – P. Bajaj / M. B. Wilms: „Intrinsic heat treatment during laser metal deposition- driving factors, kinetics and effect of alloying elements”, Metal Additive Manufacturing Conference (MAMC 2019), Örebro, Schweden
26.11.2019 – M. Dahmen: “Laser-based processing of polymeric protection coatings for lightweight applications”, European Aluminium Congress 2019 (EAC 2019), Düsseldorf, Deutschland
Dezember
02.12.2019 – M. Traub: “Lightweight and Compact Laser Processing Heads Based on Diamond Lenses”, 2019 MRS Fall Meeting, Boston, USA
04.12.2019 – M. Dahmen: “Laser-based manufacturing of functional coatings”, Sino-German Engineering Alumni Network (DCHAN-Engineering) Industry Alumni Summit 2019, Shanghai, China
11.12.2019 – V. Molina: “Laser Metal Deposition of Ultra-fine Duplex AlCrFe2Ni2-based High Entropy Alloy”. Material Science and Technology of Additive Manufacturing (MSTAM 2019), Bremen, Deutschland
17.12.2019 – Prof. R. Poprawe: “The Future of Digital Photonic Production”
Digitalization of Photonics, Peking University, Third Hospital, Peking, China
18.12.2019 – Prof. R. Poprawe: “The Future of Digital Photonic Production Digitalization of Photonics”, Beijing University of Technology, China
19.12.2019 – Prof. R. Poprawe: “Innovation in Mobility by Digital Photonic Production”, Digitalization of Photonics, Beijing Jiaotong University, China
23.12.2019 – Prof. R. Poprawe: „Digital Photonic Production-Zukunft gestalten mit Fraunhofer und der RWTH - SPECIAL: Wie gehen wir mit China um?“, Aachen, Deutschland
2018
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2018
Januar
29.01.2018 – Poprawe, R.: Digital Photonic Production along the lines of Industry 4.0
Photonics West 2018, San Francisco, CA, USA
30.01.2018 – Martin, H.: Automated and model-based assembly of an anamorphic telescope, SPIE Photonics West, San Francisco, USA
31.01.2018 – Bonhoff, T.: Multi-physical modeling of thermal and dispersive effects in optical systems for high power ultra-short laser pulses, SPIE Photonics West, San Francisco, USA
31.01.2018 – König, G.: Development of an adaptive laser beam shaper, SPIE Photonics West, San Francisco, USA
31.01.2018 – Fitzau, O.: Directly q-switched high power resonator based on XLMA-fibers, SPIE Photonics West, San Francisco, USA
31.1.2018 – Kalupka, C.: Ultrafast Dynamics of Material Excitation of Dielectrics with Ultrashort Pulsed Bessel Beams, Photonics West, San Francisco
Februar
21.02.2018 – Schleifenbaum, J.: Additive Manufacturing and the agile production company, Vortrag, Düsseldorf, Deutschland
28.03.2018 – Schleifenbaum, J.: Integrated AM Quality Assurance, Vortrag, Schaumburg, USA
März
05.03.2018 – Walochnik, M.: Pump-power scaling of a diode-pumped Alexandrite laser, DPG-Tagung Erlangen'18, Erlangen, Deutschland
06.03.2018 – Connemann, S.: Next generation urban mining – laser-based sensing and sorting of electronic scrap, SBSC 2018, Aachen, Deutschland
13.03.2018 – Rittinghaus, S.-K.: Laser Additiv Manufacturing of Titanium Aluminides, TMS2018, Arizona, USA
14.03.2018 – Poprawe, R.: Digital Photonic Production along the lines of Industry 4.0 Laser World of Photonics, Shanghai, China
15.03.2018 – He, C.: Ultra-high quality helical drilling and cutting with beam-profile independency within the industrial manufacturing, 13th International Laser Processing and Systems Conference, Shanghai, China
15.03.2018 – Pichler, T.: Increasing Productivity of Laser Powder Bed Fusion (L-PBF) by Qualifying and Processing Different Powder Qualities, DDMC Berlin
15.03.2018 – Schmithüsen, T.: Automatable Support Removal and Surface Smoothing of Additive Manufactured Parts Made of AlSi10Mg, DDMC Berlin
15.03.2018 – Schniedenharn, M.: On the Correlation of the Shielding Gas Flow in L-PBF Machines with Part Density
20.03.2018 – Noll, R.: Inverse production line for the automated dismantling of mobile phones with selective laser-based detaching and sorting of valuable components, Berliner Recycling- und Rohstoffkonferenz 2018, Berlin, Deutschland
21.03.2018 – Poprawe, R.: Perspektiven zur Skalierung von UKP-Lasern im Multi-kW-Bereich und deren Anwendung, 4. MikroLas Innovationsforum, Rostock
27.03.2018 – Kelbassa, J.: Wire vs. Powder in LMD, Laser additive Manufacturing Conference (LAM), Schaumburg, IL USA
28.03.2018 – Schleifenbaum, J.: Integrated AM Quality Assurance, Vortrag, Schaumburg, USA
April
10.04.2018 – Poprawe, R.: Quanten-Computing und Post-Quantenkryptographie, Fokustag „Quantentechnologie“, Fraunhofer ZV München
18.04.2018 – K. van der Straeten: “Comparison of Laser-based joining approaches for plastic-metal-hybrids – Strength vs. Process speed”, Hybrid Materials and Structures 2018, Bremen
19.04.2018 – Rittinghaus, S.-K.: Laser Additive Manufacturing für die gradierte Herstellung intermetallischer Materialien, 3. Internationale Konferenz Hybrid – Materials and Structures, Bremen
19.04.2018 – Weisheit, A.: Laser Additive Manufacturing of Aluminium Alloys, AMAP Forum 2018, Aachen
19.04.2018 – Poprawe, R.: The future of Digital Photonic Production, Frontiers in Lasers and Applications, Okinawa, Japan
23.04.2018 – Poprawe, R.: What am I doing? - How to present your work, Ishigaki Conference, OPIC, Japan
23.04.2018 – J. Finger: “Scaling Strategies for Surface Structuring using High Power USP Lasers”, Photonics Europe 2018, Strasbourg
27.04.2018 – Braun, K.: LASERBASIERTE FORMKORREKTUR VON QUARZGLASOPTIKEN - LASER BEAM FIGURING (LBF); Optence Mitgliederversammlung, Köngernheim
Mai
02.05.2018 – Weisheit, A.: Materials Engineering for laser additive manufacturing, AKL´18 Laser Technology Congress, Forum Additive Manufacturing, Aachen
03.05.2018 – J. Finger: “Microstructuring for the Automotive Industry”, AKL 2018, Aachen
03.05.2018 – Poprawe, R.: Digitale Photonische Produktion –Die Zukunft der Laser-Materialbearbeitung, AKL 2018, Aachen
04.05.2018 – Schneider, F.: CFK stellt Ansprüche – auch an das Laserstrahlschneiden, AKL 2018, Aachen
04.05.2018 – Schleifenbaum, J.H.: LASER-BASED SURFACE COATING FOR INDUSTRIAL CONNECTION TECHNOLOGY AND ELECTRONICS, Aachener Kolloquium für Lasertechnik AKL `18, Aachen
04.05.2018 – Kumstel, J.: Laserpolieren und Laserkantenveredelung von Metallen, Judith Kumstel, 6. Fachtagung Entgrattechnologien und Präzisionsoberflächen in Nürtingen
14.05.2018 – Rolf Wester: “Solving the Monge-Ampere equation on triangle-meshes for use in optical freeform design”, SPIE Optical Systems Design 2018, Frankfurt
15.05.2018 – Völl, A.: Free-form optics for non-idealized light sources in 3D: a phase-space approach, SPIE Optical System Design & Besuch Messe Optatec, Frankfurt
16.05.2018 – Poprawe, R.: Latest advancements and actual perspectives of Additive Manufacturing, Beijing University of Technology Beijing, China
22.05.2018 – Poprawe, R.: The future of Digital Photonic Production, Global Intelligent Industry Conference, Beijing, China
Juni
06.06.2018 – Puetsch, O.: Optical Systems for Massive Parallel Processing: Design and Simulation, Landesmesse Stuttgart GmbH, Stuttgart
06.06.2018 – Schniedenharn, M.: Einfluss des Einfallswinkels der Laserstrahlung auf die Positionsabhängigkeit der Bauteilqualität im L-PBF Prozess
08.06.2018 – Jauer, L.: Additive Manufacturing of Magnesium Alloys (for Biomedical Application), Einweihung Laborneubau Metallische Biomaterialien des Helmholtz-Zentrums Geesthacht
13.06.2018 – Schleifenbaum, J.: Future Trends in Additive Manufacturing, Vortrag, Photonics 4 Industry , Genf, Schweiz
18.06.2018 – Masseling,L.: Additive Manufacturing of Honeycomb Seal Strips, Turbo Expo 2018, American Society of Mechanical Engineers (ASME), Lillestrom Norway
22.06.2018 – Schulz, W.: Mathematical Model Reduction using Inertial Manifold concept applied to digitalization of laser processing, MyRes2018 Conference, Mauritius
24.06.2018 – Küpper, M.: Laser polishing of cold work steel AISI D2 for dry metal forming tools: Surface homogenization, refinement and preparation for self-assembled monolayers; ICTMP, Helsingör, Dänemark
25.06.2018 – K. van der Straeten: „Influence of climatic changes on the joint strength of laser joined plastic-metal-hybrids“, LPM 2018, Edinburgh
26.06.2018 – Brenner, A.: Increasing productivity of ultrashort pulsed laser ablation for a combination process with ns-laser, LPM 2018, Edinburgh (UK)
26.06.2018 – Hollatz, S.: Measurement of Keyhole Depth during Laser Beam Micro Welding with Scanners, LPM 2018, Edinburgh (UK)
26.06.2018 – Bornschlegel, B.: In-Situ Analysis of USP Ablation with High Repetition Rates, LPM 2018, Edinburgh, Schottland
26.06.2018 – Küpper, M.: Laser polishing of cold work steel AISI D2 for dry metal forming tools: Surface homogenization, refinement and preparation for self-assembled monolayers, Konferenz ICTMP Helsingör, Dänemark
26.06.2018 – He, C.: High-efficiency sub-micrometer multi-beam interference structuring for large-scale surface using ultrashort laser pulses, 19th International Symposium on Laser Precision Microfabrication, Edinburgh, Schottland
26.06.2018 – Poprawe, R.: Industry 4.0 – Next generation Ultrafast Laser Systems and Ablation Applications, AOMATT, 9. Internationals Symposium, Chengdu, China
28.6.2018 – Kalupka, C.: Ultrashort Pulse Processing of Transparent Ceramics: The Role of Electronic and Thermal Damage Mechanisms, Laser Precision Microfabrication 2018, Edinburgh
Juli
12.07.2018 – Poprawe, R.: Perspectives of Additive Manufacturing L-PBF
in the course of Industry 4.0, Wissenschaftsnacht, Aachen
16.07.2018 – Poprawe, R.: Perspectives of Additive Manufacturing
L-PBF and LAM in the course of Industry 4.0, Karmann Conference, Bergisch Gladbach
16.07.2018 – Hollatz, S.: Investigation of Laser Micro Welding of Aluminium and Copper Butt Joints using Spatial Power Modulation, IIW 2018, Bali
18.07.2018 – Petring, D.: Gaining deeper insight into laser beam cutting by process simulation and diagnostics, IFSW Macro Workshop 2018, Freudenstadt
18.07.2018 – Helm, J.: Influence of the Surface Properties on the Reliable and Reproducible Contacting of Battery Cells with a Laser Beam Welding Process, 71st IIW Annual Assembly & International Conference, Bali
18.07.2018 – K. van der Straeten: “Influence of self-organizing microstructures on the wettability of molten plastic on steel for hybrid plastic-metal-joints”, IIW Annual Assembly 2018, Bali
23.07.2018 – Masseling,L.: Advancing Precision in Additive Manufacturing, 2018 ASPE and euspen Summer Topical Meeting, American Society of Precision Engineers (ASPE), Lawrence Livermore Berkeley Lab, Berkeley USA
26.07.2018 – Poprawe, R.: Latest advancements and actual perspectives of Additive Manufacturing, Additive Manufacturing Conference, Hangzhou, China
August
01.08.2018 – Poprawe, R.: Ultrafast Laser Processing in the multi-KW-range –why and what for? International Academy of Photonics & Laser Engineering, Kapstadt, Südafrika
21.08.2018 – Barthels, T.: High precision ultrashort pulsed laser drilling of thin metal foils by means of multibeam processing, SPIE Konferenz, San Diego
22.08.2018 – Brenner, A.: Increasing productivity of ultrashort pulsed laser ablation for commercialization of micro structuring, SPIE Optics + Photonics 2018, San Diego (USA)
29.08.2018 – Poprawe, R.: Latest advancements and actual perspectives of Additive Manufacturing, Summer School, Aachen
September
05.09.2018 – K. van der Straeten: „Polygon scanning system for high-power, high-speed microstructuring“, LANE 2018, Fürth
05.09.2018 – Hofmann, O: Model-based analysis of highly dynamic laser beam shaping using deformable mirrors, 10th CIRP Conference on Photonic Technologies (LANE 2018), Fürth
05.09.2018 – Bonhoff, T: Multi-physical analysis of thermo-optical effects for different Selective Laser Melting (SLM) scanning strategies, 10th CIRP Conference on Photonic Technologies (LANE 2018), Fürth
11.09.2018 – Maischner, D.: Two Step Laser Coating for 3D Surfaces and Large Areas, Forschungskolloquium DVS, RWTH Aachen University, Aachen
12.09.2018 – Willenborg, E.: Laser Beam Figuring (LBF) for form correction of glass optics; LaP 2018, Aachen
12.09.2018 – Schleifenbaum, J.: DPP – perspectives on tomorrow’s world of individualized & smart industrial products, Vortrag, -> IMTS, Chicago, USA
13.09.2018 – Nüsser, C.: Laser micro polishing of metals: process fundamentals; LaP 2018, Aachen
13.09.2018 – Braun, K.: LASER POLISHING OF POLYMER PARTS MANUFACTURED BY SLS AND FDM; LAP 2018, Aachen
14.09.2018 – Danylyuk, S.: Are short wavelengths the future of semiconductor metrology? 16th Fraunhofer IISB Lithography Simulation Workshop, Gräfenberg, Germany
19.09.2018 – Danylyuk, S.: Actinic laboratory EUV tools for mask and pellicle metrology, SPIE International Conference on Extreme Ultraviolet Lithography, Monterey, USA
19.09.2018 – Poprawe, R.: Kuratoriumspräsentation, Kuratoriumssitzung, Aachen
20.09.2018 – Poprawe, R.: Stimulierte Innovation am Beispiel Digital Photonic Production in Aachen, Fachtagung zur Förderinitiative Forschungscampus, Berlin
20.09.2018 – Bauer, C.: On the Imposition of Dirichlet Boundary Conditions at Moving Boundaries with Applications in Laser Processing, MESIGA2018 Conference, Berlin
20.09.2018 – Küpper, M. (stellvertretend für Kumstel, J.).: Deburring and rounding of sheet metals and functionally relevant edges of parts using laser radiation; ICNFT, Bremen
24.09.2018 – Poprawe, R.: Professor Dr. Eckhard Beyer – 2018, Ehrenkolloquium, Dresden
24.09.2018 – Tenbrock, C.: Laser Powder Bed Fusion at Fraunhofer ILT, GM Additive Manufacturing Event, Turin, Italien
25.09.2018 – Brose, S.: High-resolution patterning by EUV interference lithography with a compact exposure tool, Micro- and Nanoelectronic Days, Kopenhagen, Dänemark
26.09.2018 – Schleifenbaum, J.: Aktuelle und zukünftige Entwicklungen im metallischen 3D Druck, Vortrag, 3D Valley Conference, Aachen, Deutschland
26.09.2018 – Gayer, C.: Micro Powder Bed Fusion (µ-PBF) Höchste Präzision für kleinste Teile, 3D Valley Conference 2018, Aachen
26.09.2018 – Fuchs, F.: LASER-BASED SURFACE COATING FOR INDUSTRIAL CONNECTION TECHNOLOGY AND ELECTRONICS, 2. Praxisforum 3D-Gedruckte Elektronik, Würzburg
28.09.2018 – Schleifenbaum, J.: Skalierung und Optimierung von AM Prozessen für die nächste metallische Bauteilgeneration, Vortrag, Fraunhofer-Alumni-Summit 2018, Aachen, Deutschland
Oktober
08.10.2018 – Gayer, C.: Additive Manufacturing of Magnesium Alloys with
Laser Powder Bed Fusion, 26. Magnesium User- und Automotive Seminar 2018, Düsseldorf
09.10.2018 – Strotkamp, M.: Diode-Pumped Alexandrite Laser Instrument for Next Generation Satellite-Based Earth Observation, International Conference on Space Optics (ICSO), Kreta, Griechenland
10.10.2018 – Poprawe, R.: Material, Design and Scaling of Additive Manufacturing, Funktionale Materialien für die addtitive Fertigung, 5. Ruhr-Symposium, Duisburg
15.10.2018 – Poprawe, R.: 50 Years of the Laser Institute of America ICALEO, Orlando
15.10.2018 – Saewe, J.: Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel, Euro PM2018 Congress & Exhibition, Bilbao, Spanien
15.10.2018 – Vogelpoth, A.: Development of adapted ni-738 powder for additive manufacturing
16.10.2018 – Kelbassa, J..: Equipment and Process Windows for Laser Metal Deposition with Coaxial Wire Feeding, 37th International Congress on Applications of Lasers & Electro-Optics (ICALEO), Orlando, FL USA
16.10.2018 – Schopphoven, T.: Business Case: Extreme High Speed Cladding, 37th International Congress on Applications of Lasers & Electro-Optics (ICALEO), Orlando, FL USA
November
06.11.2018 – K. van der Straeten: „Metal meets Composites – Laser-based Joining of Hybrid Materials“, Lightweight Technologies Forum, Composites Europe, Stuttgart
15.11.2018 – Saewe, J.: Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Plate Preheating System, Metal Additive Manufacturing Conference 2018, Wien, Österreich
15.11.2018 – Vogelpoth, A.: VCSEL-based preheating for laser powder bed fusion (LPBF)
16.11.2018 – S. Hollatz: Efficient contacting of battery cells to produce modules and packs for power tools and electric vehicles, IBPC 2018, Braunschweig
16.11.2018 – Gayer, C.: Additive Fertigung von biologisch abbaubaren Implantaten, Kindertraumatologisches Symposium, Aachen
22.11.2018 – Poprawe, R.: Digital Photonic Production along the lines of Industry 4.0, Metal Additive Manufacturing Conference, Wien
23.11.2018 – Gasser, A.: Laser Metal Deposition for Industrial Applications in the Area of Repair, Coating and Additive Manufacturing, International Symposium on Structure Reliability and Systems Engineering Technologies of Railway Vehicle, Changchun, China.
23.11.2018 – Braun, K.: LASERBASIERTE FORMKORREKTUR (LASER BEAM FIGURING) VON OPTIKEN AUS QUARZGLAS; 11. Jenaer Lasertagung, Jena
23.11.2018 – Kumstel, J.: Laserpolieren und Laserkantenveredelung von Metallen, 7. Fachtagung Entgrattechnologien und Präzisionsoberflächen in Lüdenscheid
Dezember
01.12.2018 – Poprawe, R.: Präzisionswerkzeuge aus Laserlicht verändern unsere Welt, RWTH Aachen, Aachen
07.12.2018 – Poprawe, R.: IDM Joint Lab Tsinghua University – RWTH Aachen, Hangzhou Conference, China
09.12.2018 – Poprawe, R.: The future of Digital Photonic Production by Smart Laser Materials Processing, Nanjing Conference, China
13.12.2018 – Poprawe, R.: TOP 14 Kooperationsoffensive Universitäten, Präsidiumssitzung, Dresden
14.12.2018 – Poprawe, R.: Universitäten und Fraunhofer – Best Practice in IME und ILT, Präsidiumssitzung, Dresden
2017
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2017
Januar
30.01.2017 – Poprawe, R.: Next Generation Manufacturing: Industry 4.0 and Digital Photonic Production, Photonics West 2017, San Francisco, CA, USA
31.01.2017 – Puetsch, O.: Arbeitstitel: "Laserstrahlfomrung mit Membranspiegeln", Photonics West 2017, San Francisco, CA, USA
31.01.2017 – Jungbluth, B.: High-power optical parametric frequency converters with addressable wavelengths in the infrared, Photonics West 2017, San Francisco, CA, USA
Februar
01.02.2017 – Elsen, F.: Demonstration of a 100mJ OPO/OPA for Future LIDAR Applications and LIDT-Testing of Optical Components for MERLIN, , Photonics West 2017, San Francisco, CA, USA
01.02.2017 – Luttmann, J.: FULAS: Design and test results of a novel laser platform for future LIDAR missions, Photonics West 2017, San Francisco, CA, USA
01.02.2017 – Kucirek, P.: A single-frequency Ho:YLF pulsed laser with spectral stability better than 500 kHz, Photonics West 2017, San Francisco, CA, USA
01.02.2017 – Schulte, J.: 375 W, 37.5 μJ, <170 fs laser system utilizing nonlinear pulse compression in fused silica, Photonics West, San Francisco, CA, USA
03.02.2017 – Schleifenbaum, J.: A Direct Photonic Production - Additive Manufacturing of the Future, Vortrag, Düsseldorf, Deutschland
15.02.2017 – Schleifenbaum, J.H.: Additive Production, ICTM Aachen - International Center for Turbomachinery Manufacturing, Aachen, Deutschland
15.02.2017 – Noll, R.: Inline inspection of semi-finished metallic products – perspectives of absolute measuring interferometry, EALA 2017, Bad Nauheim, Deutschland
21.02.2017 – Day, R.: Micro Selectiv Laser Melting, LAM Houston, Houston, USA
März
09.03.2017 – He, C.: Rapid nanostructuring by multi-beam-interference using consecutively overlapped ultrashort laser pulses, CoE Vollversammlung + Konferenz, Aachen, Deutschland
14.03.2017 – Poprawe, R.: Actual Trends and Challenges of Laser Additive Manufacturing, Laser World of Photonics, Shanghai, China
15.03.2017 – Schneider, F.: Laser Cutting and Joining of Hybrid-Polymer-Metal Parts, JEC, Paris, Frankreich
15.03.2017 – Zibner, F.: High precision laser micro processing with increased throughput for industrial production, Messe Shanghai, China
17.03.2017 – Poprawe, R.: Lasers and Applications for the better future
Photonic Academy, Aachen, Deutschland
21.03.2017 – Traub, M.: Design of optical systems for high-power laser applications, European ZEMAX User Group Meeting, München, Deutschland
23.03.2017 – Hoffmann, H.: Extending the Parameter Range of High Power Ultrafast Lasers, ILAS 2017, Grantham, England
29.03.2017 – Helm, J.: Connecting battery cells for electric vehicles using laser micro welding, Kraftwerk Batterie, Aachen, Deutschland
April
04.04.2017 – Gillner, A.: Laser Processing of Glass, Advanced Processes for Micromachining of Transparent Materials, Vision Glass, Dresden, Deutschland
06.04.2017 – Poprawe, R.: The Future of Digital Photonic Production, EPIC Annual General Meeting , Eindhoven, Niederlande
20.04.2017 – Poprawe, R: Innovation of Digital Photonic Production along the lines of Industrie 4.0, OPIC, Japan
26.04.2017 – Hoffmann, D.: Extending the Parameter Range of Ultrafast Lasers concerning Power, Wavelength and Pulse Duration, 4. UKP-Workshop 2017, Aachen, Deutschland
26.04.2017 – Gillner, A.: Digital Photonic Production –High Power Ultrafast Lasers for Next Generation Production, 4. UKP-Workshop Aachen, Deutschland
Mai
18.05.2017 – Dahmen, M.: Weld Metallurgy, Mechanical Properties and Fracture Behaviour of LMD Produced Stellite 31 and Wrought Nimonic 75 Dissimilar Welds, ICWAM, Metz, Frankreich
18.05.2017 – Brose, S.: Achromatic Talbot lithography with partially coherent and coherent EUV radiation, Paul Scherrer Institut, Villigen, Schweiz
22.05.2017 – Poprawe, R: Innovation of Digital Photonic Production along the lines of Industrie 4.0, Tshinghua University, China
22.05.2017 – Schulz, W.: Model Reduction, Meta-Modelling and Simulation Tools towards Virtual Production Intelligence. Advanced Laser Application Summit Forum, Laser Intelligent Manufacturing, Shenzen, China
30.05.2017- König, G.: Einen Strahlaufweiter TO GO, Bitte!- Automatisiertes Optikdesign, IPT Montageseminar, Aachen, Deutschland
31.05.2017 – Traub, M.: Montageoptimierte Toleranzgestaltung und thermische Auslegung optischer Systeme, Seminar „Automatisierte Montage optischer Systeme“, Aachen, Deutschland
31.05.2017 – Wirz, W.: Entwicklung robuster optomechanischer Systeme, Seminar „Automatisierte Montage optischer Systeme“, Aachen, Deutschland
Juni
07.06.2017 – Olowinsky, A.: Laser based joining processes for battery assembly and high power Electronics – recent results and future applications, LPM2017, Toyama, Japan
08.06.2017 – Janssen, S.: An Improved Scanning Strategy for Long Pulsed Laser Drilling of Carbon Fiber Textiles, LPM 2017, Toyama, Japan
08.06.2017 – Gillner, A.: Laser Micro and Nano Processing: Current Trends and Future Prospects, LPM 2017, Toyama, Japan
09.06.2017 – Holters, M.: Ermittlungen der Montagereihenfolge für Präzisionsoptiken, DGaO, Dresden, Deutschland
13.06.2017 – Connemann, S.: Automated LIBS sorting system for spent refractories from the stell industry for high-value recycling, EMSLIBS 2017, Pisa, Italien
13.06.2017 – Sturm, V.: Fast Identification of Steel Bloom Composition at a Rolling Mill by LIBS Elemental Analysis, Pisa, Italien
13.06.2017 – Fricke-Begemann, C.: LIBS for identification and localization of valuable materials in electronic waste, EMSLIBS 2017, Pisa, Italien
14.06.2017 – Gillner, A.: High-speed laser surface functionalization with ultrafast lasers and innovative optics, PhotonicNet-Seminar Surface Processing, Göttingen, Deutschland
15.06.2017 – Kimm, M.: Design of flexible implants for preservation of physiological mobility exploiting Additive Manufacturing, CAOS International 2017, Aachen, Deutschland
15.06.2017 – Poprawe, R: Laser meets CAOS - Focus on the human
International Society for Computer Assisted Orthopaedic Surgery, Aachen, Deutschland
16.06.2017 – Schulz, W.: Relevance of Modeling Laser-material Interactions in the Industrial Context. CLEO 2017, San Jose, Kalifornien, USA
20.06.2017 – Poprawe, R.: Next Generation Laser Additive Manufacturing
Fraunhofer IGD, Darmstadt, Deutschland
21.06.2017 – Dahmen, M.: High-Manganese Steel Dissimilar Joints by Laser Beam Welding – Metallurgy and Properties, Konferenz »Steel in Cars and Trucks«, Amsterdam, Niederlande
26.06.2017 – Poprawe, R.: Digitale Photonische Produktion und Industrie 4.0
Lasers in Manufacturing, Munich, Deutschland
26.06.2017 – Schulz, W.: Interactive Communication by Customer Simulation Tools towards Virtual Production Intelligence, LASER World of PHOTONICS 2017, München, Deutschland
26.6.2017 – Noll, R.: Next generation urban mining – recovery of valuable materials from electronic equipment: the European project ADIR, EMC 2017, Leipzig
26.06.2017 – Day, R.: Addititve Fertigung als neuer Fertigungsansatz, ASME Turbo Expo, Charlotte NC, USA
27.06.2017 – Bonhoff, T.: Experimental and Theoretical Analysis of Thermo-optical Effects in Protective Window for Selective Laser Melting, LiM 2017, München, Deutschland
28.06.2017 – Uchtmann, U.: Laser Micro Drilling of Wing Surfaces for Hybrid Laminar Flow Control, LASER World of PHOTONICS 2017 & LIM 2017, München, Deutschland
28.06.2017 – Hoffmann, D: EffiLAS – The German Research Initiative for Innovative High Power Lasers, Application Panel, LASER 2017, München, Deutschland
28.06.2017 – Hoffmann, D.: Current trends in the laser-photonics sector, Forum - Space meets LASER World of PHOTONICS München 2017, Deutschland
29.06.2017 – Völl, A.: Application Specific Intensity Distributions for Laser Functionalization of (Nano-) Ceramic Coatings, LASER 2017, München, Deutschland
30.06.2017 - van der Straeten, K.: Self-organizing Microstructures on Aluminum for Joining with Fiber-reinforced Plastics, IIW 2017, Shanghai, China
Juli
10.07.2017 – König, G.: Comparison of Different Methods for Robustness Estimation in Simple Lens Systems, Denver, USA
11.07.2017 – Traub, M.: Synthetic Mono-Crystalline Diamond Lenses for High Power Laser Materials Processing Applications. Optical Testing and Fabrication Conference, Denver, CO, USA
12.07.2017 – Jungbluth, B.: Fraunhofer ILT - Photonic Solutions and Possible Contributions to Quantum Technology and Information. 31. Umbrella Symposium on Quantum Information and Technology, Aachen, Deutschland
19.07.2017 – Danylyuk, S.: EUV lithography- Swan song of the Moore`s law, ISP NAS of Ukraine, Kiew, Ukraine
19.07.2017 – Brose, S.: EUV interference lithography- High resolution patterning towards 10 nm half-pitch, ISP NAS of Ukraine, Kiew, Ukraine
24.07.2017 – Poprawe, R: Lasertechnik an der RWTH-Aachen Fachhochschule Aachen, Deutschland
28.07.2017 – Poprawe, R.: The Future of Laser Additive Manufacturing
Additive Manufacturing Conference of China, Hangzhou, China
August
01.08.2017 – He, C.: Laser micro and nanostructuring using ultrashort laser pulses, Projekttreffen Exzellenzcluster C3, Aachen, Deutschland
03.08.2017 – Poprawe, R.: Laser Additive Manufacturing 2.0
IAPLE Conference, Kos, Griechenland
15.08.2017 – Poprawe, R.: Production Technology meets Industrie 4.0 – Laser Additive Manufacturing, Summer School, Aachen, Deutschland
28.08.2017 – Wehner, M.: Monitoring Soft Tissue Coagulation by Optical Spectroscopy, Biophotonics Riga, Riga, Lettland.
September
11.09.2017 – Lensing, R.: Laser Assisted Bioprinting (LAB) without sacrificial metal layer for contamination free assembly of cell cultures, Jahrestagung der Biomedizintechnik und Dreiländertagung der medizinische Physik, Dresden, Deutschland
14.09.2017 – Noll, R.: Lasermesstechnik und EUV-Technologie oder Photonen von 1 bis 1000 nm: erzeugen, führen, wirken, messen, Kolloquium am Fraunhofer-Institut für Physikalische Mikrosysteme, Dresden, Deutschland
19.09.2017 – Fricke-Begemann, C.: ADIR – Next generation urban mining, SPIRE process industry conference, Brüssel, Belgien.
19.09.2017 – Engelmann, C.: Metal Meets Composites - Laser Processing of Hybrid Components, Lightweight Technologies Forum der Composites Europe, Stuttgart, Deutschland
20.09.2017 – Pongratz, L.: Lasertechnik für funktionale Oberflächen - Verfahren und Systeme, Fachtagung Kunststoff-Institut Lüdenscheid, Deutschland
Oktober
11.10.2017 – Hinke, C.: Beam Sources for Metal Additive Manufacturing – Status Quo and Requirements, Konferenz, Conventry, England
12.10.2017 - Schleifenbaum, J.H.: From Fiction to Factory – Success Factors Enabling AM as a Serial Production Technology? 1st munich technology conference, München, Deutschland
12.10.2017 – Gillner, A.: Novel Laser based Technologies for Bio-Printing of functional components, 3D printing & Bio-printing in Healthcare Conference, Düsseldorf, Deutschland
13.10.2017 – Prochnau, M.: Approach towards the digital optical twin, IODC, Denver, USA
17.10.2017 – Gillner, A.: Hochleistungs-Ultrakurzpulsbearbeitung für die Werkzeugtechnik und funktionale Oberflächen, IVAM LaserForum, Buchs, Schweiz
22.10.2017 – van der Straeten, K.: Laser-Based Plastic-Metal-Joining with self-organizing microstructures considering different load directions, ICALEO 2017, Atlanta, USA
23.10.2017 – Pütsch, O.: Self-optimizing Assembly Strategies for Tomorrow`s Optical Systems Production, OpticWeek DSPE, Aachen, Deutschland
24.10.2017 – Arntz, D.: In-Situ-visualization of multiple reflections on the cut flank during laser cutting with 1 micron wavelength, ICALEO 2017, Atlanta, USA
25.10.2017 - Schleifenbaum J.H.: Hybride additive Fertigung; 15. Cottbuser Leichtbau Workshop „Hybride Technologien für die Praxis“, Cottbus, Deutschland
27.10.2017 – Poprawe, R.: The future next level international University collaboration: Tsinghua and RWTH, Zehnjahresfeier RWTH-Büro Peking, China
November
02.11.2017 – Poprawe, R.: Wissenschaft und Wirtschaft: RWTH und China
RWTH Aachen, Deutschland
07.11.2017 – Weitenberg, J.: “High-Harmonic Generation for Metrology Applications”, EUV Source Workshop, Dublin, Irland
8.11.2017 – Bergmann, K.: Plasma based XUV sources for metrology applications, 2017 Source Workshop, Dublin, Irland
9.11.2017 – Nottrodt, N.: The influence of laser-induced-forward transfer on cell viability and growth, Jahrestagung der Deutsche Gesellschaft für Biomaterialien, Würzburg, Deutschland
10.11.2017 – König, G.: Licht zum Anfassen-Musizieren mit Licht, RWTH Wissenschaftsnacht, Aachen, Deutschland
14.11.2017 – Hoffmann, D.: Fraunhofer support to spin-offs and technology road-maps, EUCALL workshop Innovation Potential of Advanced Laser Light Sources, Sitges, Spanien
16.11.2017 – Bonhoff, T.: Multiphysikalische Analyse von optischen Systemen für die Lasermaterialbearbeitung. CADFEM ANSYS Simulation Conference, Koblenz, Deutschland
20.11.2017 – Poprawe, R.: The future of Individualization by Digital Photonic Production in the context of Industrie 4.0, World Mass Costumization & Personalization Conference, Aachen, Deutschland
22.11.2017 – Löhring, J.: Robust Packaging of Optomechanical Systems for Aerospace Applications, Messe expoAIR, International Aerospace Supply Chain and Technology, München, Deutschland
23.11.2017 – Schleifenbaum, J. H.: Digital Additive Production – Chancen und Perspektiven für den Werkzeugbau, 17. Internationales Kolloquium Werkzeugbau mit Zukunft, Aachen, Deutschland
28.11.2017 – Hoffmann, D.: Festkörperlaser und Diodenlaser für das Schweißen von Kunststoffen, Süddeutsches Kunststoffzentrum (SKZ), Würzburg, Deutschland
28.11.2017 – Wang, Y.: Advance data enrichment and data analysis in laser drilling process. Präsentation, Nanjing, China
Dezember
05.12.2017 – Hermanns, T.: Interactive process simulation for industrial applications at the example of laser drilling, Vortrag bei Konferenz, Hobart, Australien
06.12.2017 – Jansen, U.: Boundary Layer Approximation for Melt Film Dynamics in Laser Fusion Cutting, MODSIM2017, Hobart, Australien
06.12.2017 – Poprawe, R.: The role of Additive Manufacturing in Industrie 4.0, World and Smart Conference, Nanjing, China
08.12.2017 – Traub, M.: Status and path forward on highly brilliant diode-laser-based modules and systems and their applications, FBH-Institutskolloquium, Berlin, Deutschland
13.12.2017 – Zarei, O.: Development of a space-filling algorithm based on the lattice and tree structures considering loading conditions and manufacturing constraints in 3D metal printing, Computer Aided Additive Manufacturing (CAMA), Bremen, Deutschland
18.12.2017 – Poprawe, R.: Physics in Tailored Light – Future Laser Technology Physics Colloquium, RWTH Aachen, Deutschland
2016
Vorträge von Wissenschaftlern des Fraunhofer ILT im Jahr 2016
Januar
15.01.2016 – Hengesbach, S.: Simultaneous Frequency Stabilization and High-Power Dense Wavelength Division Multiplexing (HP-DWDM) using an External Cavity based on Volume Bragg Gratings (VBGs), Photonics West 2016, LASE Konferenz, San Francisco, USA
18.01.2016 – Gayer, C.: Verfahrensentwicklung des Selective Laser Melting für resorbierbare Werkstoffe, Materialforum Rhein-Main, Hanau, Deutschland
19.01.2016 – Petring, D.: Virtual Laser Cutting Simulation for Real Parameter Optimization, JLPS 84th Laser Materials Processing Conference, Yamanashi Prefecture, Japan
26.01.2016 – Witzel, J.: From Prototypes to Products with Laser Additive Manufacturing, 3D Printing Materials Conference, Maastricht, Niederlande
28.01.2016 – Witzel, J.: Additive Manufacturing- Individualisierung und Komplexität als Treiber für neue Technologien in der Zulieferindustrie, 20. Zulieferforum der ArGeZ Arbeitsgemeinschaft Zulieferindustrie, Stuttgart, Deutschland
Februar
15.02.2016 – Meiners, W.: Additive Fertigung mit SLM auf dem Weg in die Serienproduktion,3D Druck Seminar Management Circle , München, Deutschland
15.02.2016 – Gillner, A.: High Power Parallel Ultrashort Pulse Laser Processing, Photonics West 2016, San Francisco, USA
15.02.2016 – Kucirek, P.: A single-frequency double-pulse Ho:YLF laser for CO2-lidar, Photonics West, San Francisco, USA
15.02.2016 – Elsen, F.: Demonstration of a 500 mJ InnoSlab-Amplifier for Future Lidar Applications, Photonics West, San Francisco, USA
15.02.2016 – Jungbluth, B.: Diode-pumped alexandrite ring laser for lidar applications, Photonics West, San Francisco, USA
15.02.2016 – Witte, U.: Compact 35 μm Fiber Coupled Diode Laser Module based on Dense Wavelength Division Multiplexing of NBA Mini Bars. Photonics West, San Francisco, USA
16.02.2016 – Holly, C.: Monocrystalline CVD-diamond optics for high-power laser applications. Photonics West, San Francisco, USA
16.02.2016 – Sartorius, T.: Innoslab and thin-disk amplifier system with 1.5 kW average power at 710 fs pulse duration, Photonics West 2016, San Francisco, USA
16.02.2016 – Völl, A.: Computing specific intensity distributions for laser material processing by solving an inverse heat conduction problem, Photonics West 2016, San Francisco, USA
17.02.2016 – Thombansen, U.: Continuous Real Time Process Monitoring – From Challenges to Solutions, MSTM, Bremen, Deutschland
18.02.2016 – Risse, J.: Processing of High-gamma Prime Nickel-based Superalloys with High-temperature SLM, Airbustagung, Bremen, Deutschland
23.02.2016 – Connemann, S.: Automated LIBS-based classification of spent refractories from the steel industry for high-volume recycling, 7th international Conference Sensor-based sorting & control 2016, Aachen, Deutschland
23.02.2016 – Brose, S.: Enabling Laboratory EUV Research with a Compact Exposure Tool, SPIE Advanced Lithography 2016, San José, USA
23.02.2016 – Schulz, W.: Meta-Modelling towards Virtual Production Engineering, Fügesymposium 2016, Dresden, Deutschland
25.02.2016 – Schniedenharn, M.: Aufbauratensteigerung mittels High-Power Selective Laser Melting für den Werkstoff Ti6Al4V, inside 3D printing, Düsseldorf, Deutschland
25.02.2016 – Thombansen, U.: LASHARE Laser-based Equipment Assessment to advanced manufacturing in Europe, LASHARE, Bilbao, Spanien
25.02.2016 – Meiners, W.: Additive Fertigung mit SLM auf dem Weg in die Serienproduktion, Deutscher Schneidkongress, Dortmund, Deutschland
März
01.03.2016 – Weingarten, C.: Optics Manufacturing by Laser Processing, ODF'16, Weingarten, Deutschland
09.03.2016 – Poprawe, R.: Fraunhofer, Innovation, Campus. NISA Conference Brisbane, LPC Shanghai, IEEE Taiwan, Tshinghua Aachen Laser Lecture, Brisbane, Tsinghua, Shanghai, Taiwan
11.03.2016 – Witzel, J.: Generative Fertigung- ein revolutionärer Wandel steht uns bevor, ZAK-Forum, Niedernhausen, Deutschland
14.03.2016 – Zielinski, J.: AM Micromodelling at ILT/LLT, ICMEg 2016, Barcelona, Spanien
15.03.2016 – Fricke-Begemann, C.: Laser-based quality monitoring of slag as a raw material, Mineral Recycling Forum 2016, Rotterdam, Niederlande
16.03.2016 – Masseling, L: Fabrication of Micro Structures with NiTi Shape Memory Alloy via µSLM, DDMC Konferenz, Berlin, Deutschland
17.03.2016 – Diatlov, A.: Studies of New Packaging Concepts for Metallized Chip Surfaces Printed by Means of Selective Laser Melting, DDMC Konferenz, Berlin, Deutschland
22.3.2016 – Schulte, J: Aktuelle Trends in der UKP Strahlquellenentwicklung, 3. MikroLas Innovationsforum, Rostock, Deutschland
April
19.04.2016 – Poprawe, R.: The Fraunhofer Model and how to collaborate with Fraunhofer, Fraunhofer Japan, Tokyo
26.04.2016 – Willenborg, E.: Process fundamentals and industrial applications of laser polishing, LaP 2016, Aachen, Deutschland
26.04.2016 – Kumstel, J.: Enhancement of Area Rate of Laser Macro-polishing by Non-rotational Symmetric Intensity Distributions, LaP 2016, Aachen, Deutschland
27.04.2016 – Abels, P.: Process Monitoring and Control in Laser Material Processing, AKL 2016, Aachen, Deutschland
27.04.2016 – Witzel, J.: Neu in der LAM Community? Vernetzung hilft weiter! Vorstellung der Aachener Netzwerke ACAM und ICTM, AKL 2016, Aachen, Deutschland
27.04.2016 – Weingarten, C.: Laser Polishing and Shape Correction of Optical Surfaces, Fraunhofer ILT, Aachen, Deutschland
27.04.2016 – Temmler, A.: Structuring by Laser Remelting-Influence of the Material on the Structure Formation, LaP 2016, Aachen, Deutschland
27.04.2016 – Loosen, P.: Lasermärkte in Europa, Amerika und Asien, AKL 2016, Aachen, Deutschland
27.04.2016 – Meiners, W.: Stand und Perspektiven der SLM und LMD-Fertigungsverfahren, AKL 2016, Aachen, Deutschland
27.04.2016 – König, G.: An Improved Approach for Process Monitoring in Laser Material Processing, SPIE Europe 2016, Brüssel, Belgien
28.04.2016 – Poprawe, R.: Digital Photonic Production und Industrie 4.0 – Trends und strukturelle Umsetzung in Aachen, AKL 2016, Aachen, Deutschland
28.04.2016 – Jauer, L.: Selective Laser Melting of Magnesium Alloys, AKL 2016, Aachen, Deutschland
28.04.2016 – Gillner, A.: Prozessanalytik des Laserabtragverfahrens, AKL 2016, Aachen, Deutschland
28.04.2016 – Hoffmann, H.-D.: Festkörperlaser und Faserlaser für den industriellen Einsatz: Stand der Technik & aktuelle Trends, AKL 2016, Aachen, Deutschland
29.04.2016 – Schulz, W.: Adaptable Lasers for Cutting Sheet Metal, AKL16, Aachen, Deutschland
29.04.2016 – Fornaroli, C.: Hochleistungs-Ultrakurzpulslaser in der Werkzeugtechnik – Produktive Prozesse für Mikrostrukturen auf Makrobauteilen, AKL 2016, Aachen, Deutschland
29.04.2016 – Alkhayat, M.: Laserauftragschweißen und SLM in der generativen Fertigung- ein Verfahrensvergleich, AKL 2016, Aachen, Deutschland
29.04.2016 – Vedder, C.: Laser-based Production of Thin Films for Electronic Applications. AKL 2016, Aachen, Deutschland
29.04.2016 – Schulz, W.: Adaptable Lasers for Cutting Sheet Metal, Glass and Silicon, AKL 2016, Aachen, Deutschland
29.04.2016 – Poprawe, R.: Ausblick, AKL 2016, Aachen, Deutschland
Mai
18.05.2016 – Hermanns, T.: An Interactive Real-time Simulation Tool for Laser Cutting and Laser Drilling of Metals, Konferenz Vortrag, Yokohama, Japan
19.05.2016 – Bonhoff, T.: Simulation and measurement of thermo-optical effects in an f-theta lens at high laser power, DGaO International Conference on Applied Optics and Photonics, Hannover, Deutschland
19.05.2016 – Poprawe, R.: Outlook of Advanced Industrial Laser Applications for Smart Factories, SLPC Conference, Yokohama. Japan
20.05.2016 – Prochnau, M.: Piezo-based, automated active aligment of Laser resonators, DGa0 International Conference on Applied Optics and Photonics, Hannover, Deutschland
24.05.2016 – Witzel, J.: New Applications and Emerging Technologies for Laser Additive Manufacturing, 17th International Symposium on Laser Precision Manufacturing , XIAN, China
31.05.2016 – Nottrodt, N.: Surface Functionalization for Hernia Implants, Konferenz, Aachen, Deutschland
Juni
02.06.2016 – Gillner, A.: High Precision Single Cell Printing by Laser-Induced-Forward Transfer, Single Cell Technology, Frankfurt/Main, Deutschland
07.06.2016 – Petring, D.: Laser Beam Cutting – A Mature and Still Advancing Laser Application Becomes Calculable, CLEO 2016, USA
08.06.2016 – Thombansen, U.: Laser Technology from Research to Industry, Fotonica 2016, Rom, Italien
14.06.2016 – Schrage, J.: Maschinenspezifische Kostentreiber bei der additiven Fertigung mittels Laser-Strahlschmelzen, RapidTech 2016, Erfurt, Deutschland
14.06.2016 – Schniedenharn, M.: Aufbauratensteigerung mittels High-Power-Selective Laser Melting für den Werkstoff Ti6Al4V, RapidTech 2016, Erfurt, Deutschland
15.06.2016 – Witzel, J.: Laser Additive Manufacturing Technology for Metal in Aviation Industry, Management Workshops von COMAC zum Thema Additive Manufacturing, Shanghai, China
16.06.2016 – Schopphoven, T.: Herstellung von Verschleiß- und korrosionsbeständigen Beschichtungen durch Hochgeschwindigkeits-Laserauftragschweißen, 11. Fachtagung „Verschleißschutz von Bauteilen durch Auftragschweißen“, Halle (Saale), Deutschland
22.06.2016 – Holters, M.: Modellbasierte Justage Optischer Systeme, Industrie-Seminar: Automatisierte Montage optischer Systeme, Aachen, Deutschland
23.06.2016 – Thombansen, U.: LASHARE Laser-based Equipment Assesment for advanced manufacturing in Europe, I4MS Event at Industrial Technologies, Amsterdam, Niederlande
Juli
04.07.2016 – Weisheit, A.: Influence of Process Conditions in Laser Additive Manufacturing on the Microstructure Evolution of Fe-Al Alloys: A Comparison of Laser Metal Deposition and Selective Laser Melting, Alloys for Additive Manufacturing Workshop, Düsseldorf, Deutschland
06.07.2016 – Jauer, L.: Additive Manufacturing of biodegradable magnesium implants, BRIC-Workshop Visionen für die Zukunft, Ratsch, Österreich
12.07.2016 – Bergmann, K.: Kompakte Strahlungsquelle für ein Laborröntgenmikroskop, Forschungsseminar, Berlin Laboratory for Innovation X-ray Technologies, Blix Berlin, Berlin, Deutschland
August
-
September
06.09.2016 – Meiners, W.: Additive Fertigung mit dem Laserstrahlschmelzen auf dem Weg in die Serienproduktion, VDI Fachkonferernz Additive Manufacturing, Duisburg, Deutschland
07.09.2016 – Schniedenharn, M.: Einfluss von Verschmutzungen des Optikschutzglases auf den Fokusshift in ALM Anlagen, Primes Workshop, Darmstadt, Deutschland
09.09.2016 – Jauer, L.: How can we tailor Selective Laser Melting to our specific demands? Selected research topics at Fraunhofer ILT, ETH-Zürich, Zürich, Schweiz
16.09.2016 – Gronloh, B.: Space-resolved absorption measurements on a ppm scale by Photo- Thermal Commonpath Interferometry, "Oxide Workshop" DGKK, Berlin, Deutschland
16.09.2016 – Noll, R.: An ongoing journey of exploration – LIBS for industrial applications, LIBS 2016, Chamonix, Frankreich
19.09.2016 – Schopphoven, T.: Ultra-high-speed Laser Material Deposition for Internal Surfaces, ICALEO '16, San Diego, USA
20.09.2016 – Noll, R.: Automated LIBS for process control, SCIX 2016, Minneapolis, USA
20.09.2016 – Schulz, W.: City hall of Fürth, LANE2016, Fürth, Deutschland
21.09.2016 – Dahmen, M.: Mechanical properties and fracture behaviour of LMD produced 2.4682 and wrought 2.4630 dissimilar weld, DVS Congress, LANE 2016, Leipzig, Fürth, Deutschland
22.09.2016 – Schulz, W.: Meta-Modelling, Visualization and Emulation of multi-dimensional Data for Virtual Production Intelligence, CoE B1 Vortrag ICNAAM2016, Rhodos, Griechenland
22.09.2016 – Weingarten, C.: Laser polishing and Laser Beam Figuring of optical surfaces, "Ultra Precision Manufacturing", Jena, Deutschland
25.09.2016 – Witte, U., Traub, M., Hoffmann, H.-D.: Dense wavelength division multiplexing of wavelength chirped high power diode laser bars for 35 µm fiber coupling by use of ultra-steep dielectric filters, DoKDok-Konferenz 2016, Oppurg, Deutschland
27.09.2016 – Weingarten, C.: Prozesskette zur laserbasierten Herstellung von Glasoptiken, Wetzlarer Herbsttagung, Wetzlar, Deutschland
29.09.2016 – Jauer, L.: Additive Manufacturing of Biodegradable Magnesium Implants, DGBM, Aachen, Deutschland
Oktober
04.10.2016 – Schleifenbaum, J. H.: Additive Manufacturing Status Quo and future Development, Konferenz, Aachen, Deutschland
10.10.2016 – Jauer, L.: Selective Laser Melting of Magnesium Alloys, WorldPM 2016, Hamburg, Deutschland
12.10.2016 – Jungbluth, B.: Nonlinear Optics and Tunable Lasers, Seminar at University Glasgow, Glasglow, Schottland
17.10.2016 – Pirch, N.: Analysis of track formation during laser metal deposition, ICAELO 2016, San Diego, USA
19.10.2016 – Vedder, C.: Laser-based Drying of Battery Electrode Layers, ICALEO 2016, San Diego, USA
19.10.2016 – Traub, M.: Laser module based on monolithically integrated MOPAs at 1.5 µm for space-borne lidar applications (Poster), International Conference on Space Optics ICSO, Biarritz, Frankreich
19.10.2016 – Göbel, M.: LMD Process Diagrams for Blade Tip Repair, ICALEO 2016, San Diego, USA
20.10.2016 – Vedder, C.: Laser-Based Functionalization of Electronic Multi-Material-Layers for Embedded Sensors, ICALEO 2016, San Diego, USA
November
03.11.2016 – Schleifenbaum, J.-H.: Laserauftragschweißen-Neue Entwicklung für die Reparatur & den Oberflächenschutz, Industriekolloquium, Aachen, Deutschland
04.11.2016 – Schleifenbaum, J.-H.: Direct Photonic Production - Ansätze für die (Additive) Fertigung der Zukunft, Konferenzbesuch, Lemgo, Deutschland
08.11.2016 – Bergmann, K.: Scaling of discharge based XUV sources for metrology applications. International Workshop on EUV and Soft X-Ray Sources 2016, Amsterdam, Niederlande
09.11.2016 – Pirch, N.: Analyse Der Spurbildung beim Laserauftragschweissen, Simulationsforum 2016, Weimar, Deutschland
09.11.2016 – Juschkin, L.: Coherent Diffraction Imaging with Partially-coherent Discharge Plasma based EUV Sources. EUV Source Workshop, Amsterdam, Niederlande
15.11.2016 – Pütsch, O.: Aktive und adaptive Strahlformungssysteme – Methoden und Ausführungsbeispiele, BLZ-Workshop "Formung von Laserstrahlung hoher Leistung", Nürnberg, Deutschland
16.11.2016 – Weingarten, C.: Schleifen und Polieren optischer Gläser, Seminar, Aachen, Deutschland
17.11.2016 – Heußen, D.: Additive Fertigung von Kupferlegierungen mittels Selective Laser Melting (SLM), Referent Kupfersymposium am KIT, Karlsruhe, Deutschland
17.11.2016 – Schleifenbaum, J.-H. und Eibl, F.: Industrie 4.0 and the agile production company, Jenoptik Innovationstage, Jena, Deutschland
24.11.2016 – P. Kucirek: Festkörperlaser und Diodenlaser für das Schweißen von Kunststoffen, Süddeutsches Kunststoffzentrum, Würzburg, Deutschland
29.11.2016 – Weisheit, A.: Direct laser cladding of TiB2 dispersed titanium aluminide composite, iCAT 2016, Nürnberg, Deutschland
Dezember
06.12.2016 – Weisheit, A.: Laser Additive Fertigung von TiAl- Legierungen mittels LMD, DLR Werkstoff Kolloquium 2016, Köln, Deutschland
06.12.2016 – Hoffmann, H.-D.: Erweiterung des Parameterbereichs von Ultrakurzpuls Lasern im Hinblick auf Leistung und Pulsdauer, UKPL Innovationsnetzwerk, Aachen, Deutschland
22.12.2016 – Hoffmann, H.-D.: Laserquellen für den Weltraum-Einsatz, AixLaserPeople Treffen, Würselen, Deutschland
2015
Vortragsliste
Unsere Wissenschaftler haben im Jahr 2015 Vorträge auf folgenden Messen, Veranstaltungen, Fachtagungen und Konferenzen gehalten.
Januar 2015
05.01.2015 – C. Hinke: Additive Manufacturing, ThyssenKrupp Expertenforum, Lorch, Deutschland
16.01.2015 – A. Weisheit: Laser Additive Manufacturing of Intermetallics, LAPAMS, Kharagpur, Indien
21.01.2015 – R. Poprawe: Wilkens EUKOM, EU Vortrag, Brüssel, Belgien
27.01.2015 – W. Meiners: Progress in Process and Materials Development for Selective Laser Melting at Fraunhofer ILT, Maastricht, Niederlande
28.01.2015 – M. Ungers: Fortgeschrittene Anlagenüberwachung und Kontrolle für die Massenproduktion, Bad Neuheim, Deutschland
Februar 2015
05.02.2015 – T. Biermann: Center for Digital Photonic Production CDPP, LAM 2015, Orlando, FL, USA
08.02.2015 – P. Kucirek: Radiation Test on Erbium-Doped Garnet Crystals for Spaceborne CH4-Lidar Applications, Photonics West, San Francisco, CA, USA
09.02.2015 – O. Fitzau: High Stability Single-Frequency Yb Fibre Amplifier for Next Generation Gravity Missions, Photonics West, San Francisco, CA, USA
09.02.2015 – M. Wehner: Two-Wavelength Approach for Controlling of Coagulation Depth during Laser Tissue Soldering, Photonics West, San Francisco, CA, USA
09.02.2015 – R. Poprawe: Brightness and Average Power as Driver for Advancements in Diode Lasers and Their Applications, Photonics West, San Francisco, CA, USA
11.02.2015 – K. van der Straeten: Laser Transmission Welding of Long Glass Fiber Reinforced Thermoplastics, Photonics West, San Francisco, CA, USA
11.02.2015 – M. Traub: Beam Shaping for High Trough Put Cleaning Applications, Photonics West, San Francisco, CA, USA
11.02.2015 – H. Leonards: Advantages and Drawbacks of Thiol-ene Based Resins for 3D-Printing, Photonics West, San Francisco, CA, USA
12.02.2015 – U. Thombansen: Process Observation in Selective Laser Melting, Photonics West, San Francisco, CA, USA
13.02.2015 – D. Hoffmann: Innoslab - New Results, Coherent Engineering Meeting, Santa Clara, USA
25.02.2015 – J. Risse: Study of Selective Laser Melting of Non-Weldable Ni-Base Supperalloy on a Single Crystal Ni-Base Superalloy, ISAM, Dresden, Deutschland
26.02.2015 – A. Such: Increase of Productivity by Adaptive Selective Laser Melting, ICTM Conference, Aachen, Deutschland
März 2015
04.03.2015 – A. Gillner: Organic AM: 3D Printing of Organs as Spare Parts for Human Beings, LAM 2015, Orlando, FL, USA
04.03.2015 – M. Schniedenharn: High-Speed Selective Laser Melting, LAM 2015, Orlando, FL, USA
04.03.2015 – D. Hoffmann: Bandwidth Limited ns and fs Sources Based on the Innoslab Concept, DPG Tagung, Bochum, Deutschland
04.03.2015 – T. Schopphoven: Ultra-High-Speed Laser Material Deposition, LAM 2015, Orlando, FL, USA
04.03.2015 – S. Mann: Powder-Gas Jet Characterization for Laser Material Deposition Systems, LAM 2015, Orlando, FL, USA
04.03.2015 – A. Gillner: Hochleistungs-Ultrakurzpulslaser für die Materialbearbeitung - Chancen und Herausforderungen, DPG-Frühjahrstagung, Bochum, Deutschland
05.03.2015 – S. Bremen: SLM @ Fraunhofer ILT: Current Research Topics and Developments, RapidPro, Veldhoven, Niederlande
10.03.2015 – A. Olowinsky: Leichtbau-Energiepack mit integriertem Thermomanagement, Kongress Elektromobilität, Berlin, Deutschland
11.03.2015 – S. Heidrich: Formgebung, Politur und Formkorrektur von Optiken mit Laserstrahlung, Photonics BW, Oberkochen, Deutschland
11.03.2015 – L. Jauer: Selective Laser Melting of Magnesium Alloys, Biodegradable Magnesium Workshop, Turracher Höhe, Österreich
12.03.2015 – F. Schneider: Process Chain for Next Generations TP-FRP Components: 3-D Fibre Spraying, Variothermal Consolidation and Laser Processing, JEC 2015, Paris, Frankreich
12.03.2015 – C. Fricke-Begemann: Sensor Technology for EAF Process Control, Workshop R&D on Electrical Arc Furnace, Dalmine, Italien
17.03.2015 – R. Poprawe: Digital Photonics Production - The Role of Lasers in Industry, LPC 2015, Shanghai, China
17.03.2015 – D. Petring: Latest Developments in the CO2 versus Fibre Laser Cutting Debate, ILAS 2015, Kenilworth, Großbritannien
28.03.2015 – A. Häusler: Efficient Copper Micro Welding with Fiber Lasers Using Spatial Power Modulation, Matador Conference 2015, Yunlin, China
29.03.2015 – P. Heinen: Laser Micro Welding of Copper on Lithium-Ion Battery Cells for Electrical Connections in Energy Storage Devices, Matador Conference 2015, Yunlin, China
31.03.2015 – J. Kumstel: Laser Polishing of Metallic Freeform Surfaces, Icomm2015, Mailand, Italien
April 2015
09.04.2015 – R. Poprawe: Laser Metal Deposition: High Efficiency, Laser Additive Manufacturing, Tokyo, Japan
09.04.2015 – R. Poprawe: The Future of Digital Photonic Production, Photonix 2015, Tokyo, Japan
09.04.2015 – R. Poprawe: Keynote Expo, Laser Applications Expo Tokyo, Tokyo, Japan
14.04.2015 – S. Heidrich: Optics Manufacturing by Laser Processing, 2nd European Seminar on Precision Optics, Teisnach, Deutschland
14.04.2015 – M. Brosda: Zersörungsfreie Prüfverfahren für das Laserschweißen von Kunststoffen, DVS W4.12 Treffen, Morsbach, Deutschland
14.04.2015 – R. Noll: Laser-Direktanalyse Verwechslungsprüfung und mehr, VDEh-Fachausschuss Messtechnik, Düsseldorf
15.04.2015 – C. Hinke: Additive Manufacturing - Möglichkeiten und Herausforderungen, Hannover Messe, Hannover, Deutschland
21.04.2015 – N. Nottrodt: ArtiVasc 3D - Development of Artificial Vascularized Scaffolds by Additive Manufacturing, ArtiVasc EuroBioMat 2015, Weimar, Deutschland
22.04.2015 – R. Poprawe: Digital Photonic Production - The Role of Lasers in Industry 4.0, Opic Konferenz, Tokyo, Japan
23.04.2015 – A. Gasser: New Developments in Laser Metal Deposition for Repair Applications of Turbo- Engine Components, Turbine Forum, Nizza, Frankreich
28.04.2015 – R. Poprawe: Digital Photonic Production - Fertigungstechniken der Zukunft, i-Wing, Dresden, Deutschland
29.04.2015 – I. Ross: Laser Polishing of Laser Additive Manufactured Surfaces Made from IN718 and ASTM F75, ASPE 2015 Spring Topical Meeting, Raleigh, NC, USA
29.04.2015 - M. Dahmen: Laser Beam Welding of Ultra-High Strength Steels for Eco-Efficient Applications, JNPLI 2015, Nantes, Frankreich
29.04.2015 – F. Schneider: Cutting and Joining of Composites with High Power Lasers, JNPLI 2015, Nantes, Frankreich
04.05.2015 – R. Poprawe: Stand und Perspektiven der Additiven Fertigung aus prozesstechnischer und wirtschaftlicher Perspektive , Management-Circle, Düsseldorf, Deutschland
07.05.2015 – A. Gillner: 3D-Biofabrication by Laser Cell Printing, Cells Meet Surface, Braunschweig, Deutschland
11.05.2015 – M. Meixner: Production of Piezoelectric Layers by Chemical Solution Deposition and Laser Processing, EMRS, Lille, Frankreich
14.05.2015 – C. Kalupka: Non-Thermal Ablation and Deposition of Graphite Induced by Ultrashort Pulsed Laser Radiation, San Jose, Kalifornien, USA
19.05.2015 – L. Jauer: Life Cycle Cost Based Evaluation and Development of Additive Manufacturing Machines, AMPM, San Diego, Kalifornien, USA
19.05.2015 – L. Jauer: Selective Laser Melting at Fraunhofer ILT, AMPM, San Diego, Kalifornien, USA
20.05.2015 – S. Connemann: Automated Sorting of Spent Refractories from the Steel Industry for High- Value Recycling, CETAS 2015, Düsseldorf, Deutschland
21.05.2015 – V. Sturm: Inline Analysis of Liquid Slag, CETAS 2015, Düsseldorf, Deutschland
21.05.2015 – C. Fricke-Begemann: Inline Scrap Control for EAF Charging, CETAS 2015, Düsseldorf, Deutschland
26.05.2015 – C. Hartmann: Repetition Rate Dependency for High Density Perforation of Thin Al-Foils with Ultra Short Pulse Lasers, LAMP 2015, Kitakyushu, Japan
26.05.2015 – S. Britten: Measurement of the Vapor Plume Velocity in Laser Impulse Metal Bonding with Temporal Power Modulation, LAMP 2015, Kitakyushu, Japan
26.05.2015 – M. Ungers: Analysis of Robot Movements via Velocity Measurement for the Application of Laser Material Processing, LAMP 2015, Kitakyushu, Japan
26.05.2015 – D. Petring: Examination of Laser Cutting Phenomena by Comprehensive Steady-State Simulations, LAMP 2015, Kitakyushu, Japan
27.05.2015 – C. Engelmann: Examination of the Bond Strength of Laser Assists Plastic-Metal-Joints considering Different Load Directions, LAMP 2015, Kitakyushu , Japan
28.05.2015 – H. Uchtmann: Hybrid Laser Drilling of Cooling Holes by Using Millisecond Pulsed Fiber Laser Radiation and Ultrashort Pulsed Laser Radiation, LAMP 2015, Kitakyushu, Japan
28.05.2015 – V. Mamuschkin: Comparison of Different Irradiation Methods in Absorber-Free Laser Transmission Welding, LAMP 2015, Kitakyushu, Japan
28.05.2015 – F. Schneider: Laser Cutting and Joining of Fibre Reinforced Plastics within Novel Process Chains, LAMP 2015, Kitakyushu, Japan
29.05.2015 – D. Riester: High Speed Photography of Laser Induced Forward Transfer of Single and Double- Layered Transfer for Single Cell Transfer, LAMP 2015, Kitakyushu, Japan
29.05.2015 – J. Witzel: Additive Manufacturing of a Blade Integrated Disk with Laser Metal Deposition, LAMP 2015, Kitakyushu, Japan
29.05.2015 – M. Jüngst: Influence of Spatial Pulse Overlap and Temporal Pulse Delay on Ultra-Short Pulsed Laser Ablation Thin Layers, LAMP 2015, Kitakyushu, Japan
29.05.2015 – M. Dahmen: Properties of Laser-Beam Welded Ultra-High Strength Martensitic Stainless Steels, LAMP 2015, Kitakyushu, Japan
29.05.2015 – J. Risse: Additive Manufacturing in Series Production: Recent Research Topics at Fraunhofer ILT with a Focus on Turbomachinery, LAMP 2015, Kitakyusyu, Japan
Juni 2015
02.06.2015 – S. Vogt: Combined Cutting and Local Heat Treatment with Laser Radiation of Ultra High Strength Press Hardened Steels, CHS 2, Toronto, Kanada
03.06.2015 – B. Mehlmann: Laserstrahlschweißen von Kupfer- und Aluminiumbändchen - eine Weiterentwicklung zum klassischen Ribbon-Bonden, DVS AG2.4, Düsseldorf, Deutschland
09.06.2015 – J. Flemmer: Simultaneous 9-Axis-Laser-Processing, MSEC 2015, Charlotte NC, USA
09.06.2015 – J. Flemmer: Software Tool for Near-net, Cladding and Built-up by Laser Metal Deposition, MSEC 2015, Charlotte NC, USA
10.06.2015 – C. Gayer: Selective Laser Melting of Biodegradable Implants, Rapid.Tech 2015, Erfurt, Deutschland
11.06.2015 – J. Löhring: Montage optischer Systeme für Weltraumapplikationen, Seminar Optikmontage, IPTZ, ILT, Aachen, Deutschland
11.06.2015 – J. Kumstel: Polishing of SLM Manufactured Components Using cw Laser Radiation, Rapid. Tech, Erfurt, Deutschland
15.06.2015 – I. Kelbassa: Laser Additive Manufacturing LAM-Fundamentals of Selective Laser Melting SLM and Laser Material Deposition LMD, TechConnect World 2015, Bremen, Deutschland
16.06.2015 – J. Witzel: Additive Manufacturing Technologies for Aero-Engine Components, Paris Air Show, Paris, Frankreich
19.06.2015 – C. Fricke-Begemann: Laser-Based Analysis Methods, Seminar Sensors and Measurement Techniques for Monitoring and Control of the EAF Process, Düsseldorf, Deutschland
22.06.2015 – F. Schneider: Laser Cutting and Joining in a Novel Process Chain for Fibre Reinforced Plastics, LIM 2015, München, Deutschland
22.06.2015 – H. Sändker: Laser Beam Propagation and Energy Deposition in Particulate PEEK Layers, LIM 2015, München, Deutschland
22.06.2015 – I. Ross: Investigation of the Influence of Laser Surface Modifications on the Adhesive Wear Behaviour in Dry Cold Extrusion of Aluminum, LIM 2015, München, Deutschland
22.06.2015 – M. Brosda: Laser Welding of Transparent Polymer Films, LIM 2015, München, Deutschland
23.06.2015 – S. Heidrich: Glass Processing with High Power Q-Switch CO2 Laser Radiation, LIM 2015, München, Deutschland
23.06.2015 – W. Meiners: Laser-Based Additive Manufacturing: Basic Principle and Examples of Application, Laser World of Photonics – Application Panel, München, Deutschland
23.06.2015 – A. Gillner: Multi Parallel Ultrashort Pulse Laser Processing, LIM2015, München, Deutschland
23.06.2015 – C. Engelmann: Metal Meets Composite-Hybrid Joining for Automotive, LIM2015, München, Deutschland
24.06.2015 – A. Temmler: Surface Structuring by Remelting of IN 718, LIM 2015, München, Deutschland
24.06.2015 – D. Esser: Fused-Silica Mirror Substrates with Laser- Microstructured Openings with Reduced Chipping, LASER 2015/CLEO Europe, München, Deutschland
25.06.2015 – W. Schulz: Meta-Modelling for Optimization of High Power Adaptable Laser Beams, LASER 2015, München, Deutschland
25.06.2015 – C. Weingarten: Laser Polishing and Edge Rounding of Glass, LIM 2015, München, Deutschland
29.06.2015 – M. Dahmen: Properties of Laser-Beam Welded Ultra-High Strength Martensitic Stainless Steels, Kitakyushu, Osaka, Japan
Juli 2015
02.07.2015 – K. van der Straeten: Laser Cutting and Joining for Lightweight Applications, AZL, Aachen, Deutschland
07.07.2015 – A. Gillner: High Speed Multi Beam Laser Processing for Flexible Electronics, ISFOE, Thessaloniki, Griechenland
21.07.2015 – S. Janssen: Laserbearbeitung von CFK - Aktuelle Themen am ILT, CFK-Workshop, Freudenstadt, Deutschland
23.07.2015 – Al.Khawli Toufik: Advanced Metamodeling Techniques Applied to Multidimensional Applications with Piecewise Responses, International Workshop on Machine Learning, Taormina, Sizilien, Italien
27.07.2015 – R. Noll: Laser-Induced Breakdown Spectroscopy – Fundamentals and Applications, 2nd Workshop about Laser in Analytical Chemistry, São Carlos, Brasilien
28.07.2015 – R. Poprawe: Stand der additiven Fertigung aus prozesstechnischer und wirtschaftlicher Perspektive, Audi, Ingolstadt, Deutschland
30.07.2015 – R. Noll: Laser-Induced Breakdown Spectroscopy from R&D to Industrial Applications, 2nd Workshop about Laser in Analytical Chemistry, São Carlos, Brasilien
31.07.2015 – R. Noll: Fraunhofer ILT - Partner for Innovations, Embrapa, São Carlos, Brasilien
August 2015
03.08.2015 – R. Poprawe: Ultrafast Laser Processing in the KW-Range - Vision and Challenges in High Speed Precision Machining, IAPLE, Hawaii,
09.08.2015 – F. Zibner: 1 µm Adjustment-Tolerance for High-Precision Helical Laser Drilling, SPIE, San Diego, USA
13.08.2015 – C. Hördemann: Ultrashort-Pulsed Laser Processing and Solution Based Coating in Roll-to-Roll Manufacturing of Organic Photovoltaics, SPIE, San Diego, USA
17.08.2015 – S.-K. Rittinghaus: Laser Metal Deposition of Titanium Aluminides – A Future Repair Technology for Jet Engine Blades, 13th World Conference on Titanium 2015, San Diego, USA
18.08.2015 – R. Poprawe: 3D-Metalprinting Advancements, Toyota Central, Nagoya, Japan
21.08.2015 – T. Schopphoven: Investigations on Ultra-high-speed Laser Material Deposition as Alternative for Hard Chrome Plating and Thermal Spraying, ICALEO, Atlanta, USA
25.08.2015 – L. Jauer: Selective Laser Melting of Magnesium Alloys, Biodegradable Metals Conference, Carovigno, Italien
26.08.2015 – M. Dahmen: Mechanical Properties of Laser Beam Welded Ultra-High Strength Chromium Steel with Martensitic Microstructure, Lappeenranta, Finnland
September 2015
04.09.2015 – S. Engelhardt: Artificial Blood Vessel Scaffolds Made by 3D Printing, Leuven, Belgien
15.09.2015 – U. Thombansen: Prozessbeobachtung bei der generativen Fertigung mit SLM Verfahren, DVS Kongress, Nürnberg, Deutschland
15.09.2015 – S. Connemann: Automated Sorting of Spent Refractories from the Steel Industry for High-Value Recycling, EMSLIBS 2015, Linz, Österreich
15.09.2015 – R.Noll: LIBS - New Developments for Industrial Applications, EMSLIBS 2015, Linz, Österreich
15.09.2015 – C. Meinhardt: LIBS Analysis of Continuous Casting Steel with Raw Scale Layers, EMSLIBS 2015, Linz, Österreich
17.09.2015 – C. Engelmann: Laserbasierte Fügeverfahren für faserverstärkte Kunststoffe, DVS Kongress, Nürnberg, Deutschland
22.09.2015 – U. Thombansen: Lashare Trl and Csa, AILU Conference, Cambridge, Großbritannien
23.09.2015 – M. Conrad / A. Diatlov: Implementation Aspects of On-Chip Printed Micro Heat Sinks for Power Semiconductors, Montreal, Kanada
24.09.2015 – T. Hermanns: Mathematical Modelling and Linear Stability Analysis of Laser Fusion Cutting, ICNAAM 2015, Rhodos, Griechenland
25.09.2015 – W. Schulz: An Integrated Approach for the Knowledge Extraction in Computer Simulation Models with a Multidimensional Parameter Space, ICNAAM 2015, Rhodos, Griechenland
Oktober 2015
07.10.2015 – K. Bergmann: Metrology Tools for the Characterization of Light Sources in the Spectral Region around 6.x nm, EUVL Symposium 2015, Maastricht, Niederlande
07.10.2015 – J. Vieker: Compact Discharge Based EUV Source for Metrology and Inspection, EUVL Symposium 2015, Maastricht, Niederlande
09.10.2015 – M. Reininghaus: Multi Parallel Ultrashort Pulse Laser Processing, ASSL 2015, Berlin, Deutschland
09.10.2015 – U. Witte: Dense Wavelength Multiplexing and 35 µm-Fiber Coupling of Wavelength Chirped High Power Diode Laser Bars, ASSL 2015, Berlin, Deutschland
09.10.2015 - U. Thombansen: Lashare Laser-based Equipment Assessment, EMO 2015, Mailand, Italien
09.10.2015 – A. Gillner: Multi Parallel Ultrashort Pulse Laser Processing, ASSL 2015, Berlin, Deutschland
13.10.2015 – C. Weingarten: Laser Polishing of Glass, OPTIFAB, Rochester, USA
15.10.2015 – C. Hinke: Selective Laser Melting for Additive Manufacturing: Perspectives for Diode Lasers, High Power Diode Lasers & Systems Conference, Coventry, England
20.10.2015 – R. Poprawe: Advanced Method for Manufacturing Hybrid Nickel Based Components by Combining Single Crystal (SX) Subcomponents with Polycrystalline (PX) Structures Generated by Laser Metal Deposition (1301), ICALEO 2015, Atlanta, USA
21.10.2015 – S. Janssen: Comparison Between ps-and µs-Laser Radiation for Drilling Holes for Force Transmission Elements in CFRP-Preforms, ICALEO 2015, Atlanta, USA
21.10.2015 – F. Eibl: Digitale Werkzeuge in der SLM-Sonderanlagenentwicklung, Materialise User Group Meeting, Würzburg, Deutschland
21.10.2015 – J. Kittel: Advanced Method for Manufacturing Hybrid Nickel Based Components by Combining Single Crystal (SX) Subcomponents with Polycrystalline (PX) Structures Generated by LMD, ICALEO 2015, Atlanta, USA
22.10.2015 – A. Gillner: Möglichkeiten und Chancen der UKPL-Materialbearbeitung, UKP, Ditzingen, Deutschland
22.10.2015 – H. Uchtmann: Hybrid Laser Drilling of Cooling Holes, ICALEO 2015, Atlanta, USA
28.10.2015 – V. Blattmann: Progress on Wafer Texturing by Hybrid Laser-Etching-Process, PV Days, Halle, Deutschland
28.10.2015 – C. Gayer: Selective Laser Melting for Medical Applications, “ArtiVasc 3D” Public Workshop, Aachen, Deutschland
November 2015
03.11.2015 – D. Petring: The Laser in Sheet Metal Processing - Specialty or Versatile Tool for Coil Lines?, Laser Strip Welding Symposium, Hilchenbach-Dahlbruch, Deutschland
05.11.2015 – J. Vieker: Compact Discharge Based EUV Source for Metrology and inspection, PTB-Seminar VUV and EUV Metrology, Berlin, Deutschland
08.11.2015 – A. Gillner: 3D – Biofabrication by Laser Cell Printing and Ultra High Resolution Additive Manufacturing, Biofabrication 2015, Utrecht, Niederlande
10.11.2015 – K. Bergmann: Discharge Based EUV Source for Metrology and Inspection, EUV Source Workshop, Dublin, Irland
13.11.2015 – N. Nottrodt: Local Surface Functionalization of Polymer Composites with RGD for Hernia Implants, Freiburg, Deutschland
16.11.2015 – M. Brosda: Flexible and Precise Laser Processing of Polymas, IVAM High-Tech Forum, Compamed 2015, Düsseldorf, Deutschland
16.11.2015 – U. Jansen: An Interactive Approach for Fast and Frugal Decision Making in Innovative Research Cooperation, ICERI2015, Sevilla, Spanien
17.11.2015 – C. Engelmann: Examination of the Bond Strength of Laser Assisted Plastic-Metal-Joints considering Different Load Directions, Projekttreffen PMJoin + Workshop, Martos, Spanien
17.11.2015 – R. Poprawe: Laser Additive Manufacturing am Standort Aachen, Formnext Frankfurt, Frankfurt
19.11.2015 – W. Schulz: Meta-Modelling and Visualization of Multi-Dimensional Data, Lasertagung 2015, Mittweida, Deutschland
24.11.2015 – M. Traub: Beam Shaping of High Power Laser Diodes for Space Applications, Workshop on »Laser Diodes for Space Applications«, Palaiseau, Frankreich
Dezember 2015
03.12.2015 – P. Abels: Integrated Process Control for Laser Material Processing, Automotive Laser Applications Summit, Berlin, Deutschland
03.12.2015 – R. Poprawe: Technological Development and Applications of Additive Manufacturing in Europe, MIRDC Taiwan, Taiwan
08.12.2015 – D. Hoffmann: Festkörper und Diodenlaser für das Schweißen von Kunststoffen, SKZ, Würzburg
09.12.2015 – R. Noll: Recycling von Mobiltelefonen, Fraunhofer IT-Manager-Tagung, Fulda, Deutschland
16.12.2015 – G. Rolink: Laser Based Additive Manufacturing of Fe-Al Alloys for High Temperature Applications, AMPT, Madrid, Spanien